Other Parts Gun Parts

(857 deals total)

Premium ELITE Trigger Guard This trigger guard is the premium option from the Vital trigger guard that comes standard with all completed lowers. With it's slim design, it offers coverage where it is needed serving its purpose. Being made from billet aluminum you can ensure that it will not fail on you. The finish being hard coat black anodized, it will hold up to the harsh elements that you may expose it to. Finish: Black Anodized Weight: 4.61oz Includes: Pin

PD Take off Glock Factory Night Sights Police Department Take of Glock Factory Night Sights. Sights have date code of AR1. These are Gen 5 take offs. These sights were removed (and replaced with different sights) from the pistols before the department issued the pistols. Sights are in as new condition. Rear sight is Glock Part number 39744 and front sight is part number 39750. $5 Flat Rate Shipping

LT204 LaRue C.A.N. QD SPR Mount MPN#: LT204-K

*Blow-out prices - don't miss out! When these are gone, they're gone! At a glance: Mounts sight straight to the receiver, reducing overall height Made of aircraft grade aluminum, replaces plastic factory rail Mounts a C-MORE Railway or Slideride sight to the SW22® Victory™ Upgrade your SW22® Victory™ for competition and see targets more clearly with the new “Shadow” C-MORE Mount from TANDEMKROSS. The “Shadow” Mount allows the user to mount a C-MORE Railway sight or Slideride sight directly to the firearm’s receiver, without the added height of a picatinny rail and clamp.

5.45x39 U.S. manufactured Metal is unfinished (in the white) 1050 carbon stamped steel Thickness .048 thousandths (1.24mm) Both rails installed (left rail has ejector, main support post rail rivet installed) No holes for trunnion and buttstock The ejector, trigger hole, and hammer hole are heat treated

Comes with the following pre-installed: Complete Trigger Guard & Mag Catch Assembly w/ Safety Selector Stop Plate Guide Rails & Center Support Front & Rear Trunnion holes pre-drilled (rear trunnion holes pre- drilled for AK-74 style trunnion) Will fit all 1mm AK stock kits* Specifications 7.62x39mm AK-47 semi-auto AKM receiver Markings are stamped on bottom of receiver in front of magazine well Compatible with all standard AK magazines

Weaver Steel Lock Mounts allow you to adjust the eye relief on your favorite scope. These solid, all-steel rings allow you to move your scope forward or back for optimum placement. Two straps and four screws provide added gripping power for these lightweight, all-aluminum rings. Thumbscrews allow for quick detach. Weaver rings can handle any scope-mounting need. Whether you're looking for our classic Weaver's original cross-lock Top Mount, windage adjustable or dovetail extension rings; we have many great options.

FREE AND SAME DAY SHIPPING ON ALL PRODUCTS IN OUR STORE. This ambidextrous safety selector fits standard AR-15 and DPMS-pattern AR-10. It replaces the standard safety and allows either hand to use the selector. To install, remove the pistol grip, selector spring, selector detent and standard safety selector. Put the bigger piece of this ambi safety selector on the left side of the lower receive. Place the smaller piece of the safety into the groove of the bigger piece and secure with the screw. Replace the selector detent, selector spring and pistol grip.

Introduction Buy Harris BRM-S 6-9 inch Swivel Bipod with leg notches or other bipods avilable from Harris Bipods from scopelist at best price also enjoy  $6 Off on USPS Priority Shipping by using coupon USPS6 .

Molon Labe LLC Glock rear cover plate is manufactured from 6061 T6 aluminum. Hard coat Anodized for a long lasting durable finish. Permanent Laser Engraving of Logo. Fits all models and is easy to install. Product Features Replaces plastic slide cover with durable aluminum custom slide cover Fits all Glock models Easily installed and removed with no permanent modifications Permanent laser engraved etching ASIN: B007KHZLT6

Amazon.com offer UTG Tactical OP Bipod - SWAT/Combat Profile Adjustable Height + Free Shipping. UTG Tactical Op Bi-pod – Fits Swivel Stud & Picatinny/Weaver Rail, Foldable Arms with Robust External Spring Tension Control, Fully Adjustable Legs with Posi-lock Wheel & Quick Retraction Button, Center Height: 6.1”-7.9”, Leg Length: 5.5”-7.4” High Tech Durable Aluminum Construction and Steel Top Platform Clever Dual Mounting - Picatinny Mount and Swivel Stud Mount Foldable Arms with Robust External Spring Tension Control Fully Adjustable Legs with Posi-lock Wheel & Quick Retraction Button

These are lightly blemished Our American Flag laser engraved ejection port doors are precision laser engraved on our Direct Diode fiber laser engraver. These American Flag dust covers come engraved both on the inside and the outside of the door, so you're sure to represent Old Glory no matter what! SKU#: EJPD-USAF

Our original 3.5# connector is the gold standard for aftermarket connectors, with hundreds of thousands of units sold. Based on feedback from shooters, we’ve upgraded the original design, creating our new Target Connector, which will enhance your trigger pull even more. However, if neither of those models are your taste, the kit also includes the Classic connector, which is our upgraded and enhanced version of the original “long minus” connector. Pair any of these connectors with our 6# trigger spring to instantly upgrade your gun. Fits all Gen2 - Gen5 pistols except for G42/43

Recoil Buffer for the Glock pistol eliminates the metal slide from impacting the polymer frame. This repeated impact batters the frame where the two parts come into contact. Stopping this battering is accomplished by inserting the buffer between the recoil spring and the slide. Each time the action is worked or the weapon is fired the buffer comes into contact with the frame, not the metal slide. Installation of the Glock Recoil Buffer will result in reduced felt recoil, enhanced muzzle control and a longer service life.

buy four or more and pay $11 per unit. on sale. great product.

Kit Contains: 1X 9MM EXTENDED STEEL BUFFER BODY 4X ALUMINUM WEIGHTS 4X STEEL WEIGHTS BLACK OXIDE COATED 4X TUNGSTEN WEIGHTS 4X RUBBER SPACER DISKS (1 SPARE) 2X BUFFER BUMPERS (1 SPARE) 2X ROLL PINS (1 SPARE) GREAT FOR 9MM FINICKY BUILDS, FULL AUTO, SPECIAL SUBSONIC WORK ETC Included Spare Parts -RUBBER SPACER DISK -DIFFERENT COLORED BUMPER (TO NOTATE CONFIGURATION) -ROLL PIN SKU#: 2659

This Forward Assist Assembly Kit includes the pieces you need to install a functional forward assist into your stripped upper receiver. Forward Assist Forward Assist Spring Forward Assist Retention Pin SKU#: FAKIT

Description The Gorilla Machining Gen 3 Low Profile adjustable gas block with pistol gas tube for AR-15 pattern rifles is precision machined from 4340 steel and treated with QPQ Black Nitride coating. This treatment provides a Hard surface with excellent lubricity and extreme corrosion resistance. Matched with a slim, sculpted design, this gas block is perfect for mounting beneath a free-float rail system. Mounting hardware included. Set screw design for .750" barrels. Technical Information: QPQ Black Nitride coated GM Stainless Steel Pistol Gas Tube .750 ID low profile

Hard anodized type III black finish. Superior Quality Carbine Buffer Spring Standard 3 oz buffer Quality Polyurethane Bumper for longer life Steel Ambidextrous End plate and Castle nut. BUFFER TUBE: Custom design that is sized to allow it to fit with any standard End Plate/Sling Adapter without the use of a castle nut. Material: CNC Machined T6 Aluminum Finish: Hard Anodized Type III Matte Black Length: 7.3125" Includes: Universal Pistol Buffer Tube - Standard End Plate Compatible Buffer Buffer Spring Steel End Plate

Weaver Carry Handle Base Color: Matte Black Material: Aluminum Number of Bases: 1-Piece Style: Weaver Description Specs Fast, Easy Mounting For Scopes & Dot Sights Mounts on carry handle. Open sight channel allows use of sights. Cross-bar supports prevent crushing. Weaver model features eight cross-slots and accepts Weaver-style rings. Picatinny version has a true, Mil-SPec 1913 Picatinny cut along its entire length and accepts Weaver or Picatinny rings. SKU#: 080-000-668WB

Made of all weather and abrasion resistant recycle vulcanized hard rubber. Rubber resists tearing, abrasion, ozone weathering. Protect docks, dock levelers, and shelters from impact damage. Individual sections can be replaced if damaged. ASIN#: B011KH2HJI Model number#: D6466

Grip Plug designed to keep dirt and debris out of the action of your Glock also serves as a magazine funnel to aid in reloading and prevents the butt of the Glock from ripping through your shirts. Fits: 17,19,20,21,22,23,31,32,34,35,37,38-Does not fit the 21-SF! Product Features: KEEPS DEBRIS OUT DROP IN ENGINEERED FOR SPEED BEVELED FOR SPEED RE-LOADS ASIN: B0077AXZSA

Mossy oak swivel set for 1.25 inch sling has a 300+ pound strength limit. For hunting, shooting, outdoors, leisure activities ASIN#: B0083ZZG3A Model number#: MO-SS1.25" Smith&Wesson Mossy Oak Line product Metal construction: steel: Chinesium

The AR15 Bar Barrel Nut is used to connect BAR style handguards to standard threaded upper receivers. This product comes with 4 shims to properly time the gas tube with the upper receiver. Compatible with mil-spec threaded upper receivers ONLY. Includes: BAR Barrel Nut BAR Shim Pack (4 shims) Features: Material: Machined from Billet 7075-T6 Aluminum Coating: Anodized Black Torque with standard AR15 armorer's wrench

Complete Mil Spec Upper Parts Kit $13.00 Free Shipping

MPN: AR0052CASY

Glock 19, 23 Gen 3 Stripped Frame ONLY Perfect for Custom Builds Sorry CA Buyers But You Cant Buy These Unless You Are Roster Exempt.

8/11/17: Orders placed from 8/11/17 - 8/25/17 will be shipped on 8/26/17. The store is on vacation. ------------------------------------------------------ FREE AND SAME DAY SHIPPING ON ALL ITEMS This upper completion kit includes parts needed to assemble your AR15 upper receiver. AR15 EJECTION PORT DUST COVER ASSEMBLY KIT Includes: ejection port cover, ejection port hinge pin, cover spring and hinge pin snap ring FORWARD ASSIST ASSEMBLY KIT Includes: forward assist, spring and roll pin

Ambidextrous Bolt Release AR-15 Aluminum Matte Higher quality than other bolt releases The Ambidextrous bolt release is an extended lever for the standard AR-15 bolt catch. The lever allows the user to engage and release the bolt catch with the right hand on the pistol grip, or release the bolt catch with the left hand on the pistol grip. The release also simplifies malfunction clearance and reloads. Streamlined construction does not interfere with normal operation. made of 7075 T6 Aluminum

Offer expires: 5.07.18 or while supplies last Carbine length AR-15 / M4 Standard Buffer Black Finish 3 oz weight Mil-spec Made in U.S.A.

TACTICAL GEAR LINES CONVERTIBLE SLING [MADE IN USA] $42.99 +Free Shipping -Overbuilt to put up with the harshest conditions -Can convert from Single Point Sling to a Two Point Sling -Works With Any Long Long (Hunting Rifle, Fighting Rifle, Shotgun) Colors AVAILABLE: -Black -Red -Royal Blue -Fluorescent Gray -Brown

Replacement steel bolt catch for DPMS .308 lower receivers. PLATFORM M5 (.308)

Minimal-profile replacement for factory front sight/gas block won’t interfere with extended-length tactical forearms, while ensuring proper function of gas system for reliable cycling. This gas block offers adjustable control of gas.

Specification: Total weight:3.5oz Package size:3.8" x 2.6" x 0.87" Material: aluminium alloy Package Content: 2 x scope mount rings 1 x wrench This pair of 1" Scope Mount Rings fit into all Picatinny/Weaver Rails of 1"(25.4mm). ASIN#: B01BTQNV2W

SAME AND FREE SHIPPING ON ALL ITEMS ON OUR SITE

The Strike Industries M-LOK Covers provide unlimited placement options without having to cut anything to size. With single slot pieces, you can plug any M-Lok slot you need and still have the useable slots open for ventilation or accessories, and at the same time provides more dexterity for positive weapon control with the aggressive texturing. The SI M-Lok Covers are made from a hardened nylon polymer for maximum impact absorption.

Enhanced Mil-Spec Buffer Tube Kit Ultra Heavy Duty Nitride Castle Nut Ambidextrous Sling Adapter End-Plate This Kit Features Many Additional Quality Enhancements Such As The buffer tube is made out of 7075. T6 Aerospace grade aluminum. Machined out of solid Billet stock then dual flute gun drilled to exact spec. Polished & honed down to 1500 grit for the final polish for quieter and More reliable service. Enhancements such as being Notched & elongated detent Lock area along Type III Anodized finish Then Teflon Coated for Increased Abrasion Resistance.

Also referred to as Roll, Tension and Expansion Pins. Hollow and slotted lengthwise to create tension, these self retaining Spring Pins are made of Type 420 Stainless Steel.Stronger than 18-8 stainless steel, more corrosion resistant than zinc-plated and plain steel. Magnetic. Minimum Rockwell hardness is C43. They are installed by two easy operations, just drill and drive. Useful for many purposes, including electrical connectors in patch board circuits, terminals, fixtures for wire harness, actuators for drum, to secure pulley or gear to shaft, hinges, positioning, studs and many others.

DETAILS A two-point sling meant to be affixed to MSR rifles such as the SIGM400, SIG516, SIG716, MPX and MCX series of rifles.

Minimal-profile replacement for factory front sight/gas block won’t interfere with extended-length tactical forearms, while ensuring proper function of gas system for reliable cycling.

The MOE Trigger Guard (Magpul Original Equipment) is an enhanced polymer drop in replacement for the AR15/M4 weapons platform. It features a shallow "V" shape for better use of gloves in tactical shooting or cold weather operations. The MOE Trigger Guard is non-folding, has rounded edges, and fills the annoying "gap" at the rear of the standard trigger guard. Also works well with most 7.62x51 AR platforms but some custom fitting may be required. All mounting hardware included. Made in U.S.A.

Our Ultralight 34mm SPR Scope Mount features a rear ring that is pushed forward 2", resulting in better eye relief. This scope mount is designed to fit AR type upper receivers with Mil-Spec 1913 Picatinny rails and features a cross-slot keyway that offers excellent recoil protection. Our Ultralight Scope Mounts free you from unnecessary bulk, providing one of the lightest mounts in the industry. FINISH Anodized Black MATERIAL 6061 T6 extruded aluminum construction SCOPE RING SIZE 34mm SCOPE MOUNT PROFILE SPR WEIGHT(S) 4.1 oz OTHER FEATURES Designed for AR type upper receivers

Redfield medium height scope rings 5.99 per pair Securely attach your 1" main-tube diameter scope to a Weaver-style base with this pair of Redfield W Sized to fit scopes with a 1" main tube, these medium rings have a saddle height of 0 67" Each has a matte black finish Specifications: - Material: Aluminum alloy - Main Tube Diameter: 1" - Height: Medium - Mount: Wea B008CXMS2K

Brand: Ohuhu Ohuhu 6-inch to 9-inch adjustable handy spring return Sniper hunting tactical rifle Bipod this Ohuhu hunting rifle Bipod is made of heavy and duty material with an adjustable design which is a good choice for shooting activities.' hardened steel and aluminum . This Ohuhu hunting Bipod is crafted with heavy duty hardened steel and aluminum;black anodized finish, 100% rust-proof; durable aluminum construction, super strong, but lightweight. Product weight: 11.5 oz Package dimensions: 7.375" x 3.375"X 2.5" Package includes: 1 x Bipod. ASIN#: B01MF89RGK Model number#: OH-BI-69-INO1

AR15 Mil-Spec 6 Position Buffer Tube Kit is precision manufactured with durable finish. $18.99 - no special codes or memberships required. Includes: • 6-Position Mil-Spec Buffer Tube, machined from 6061 Aluminum • Stock latch plate • Castle nut • Spring • Buffer - 3 oz • Support from our USA Customer Service Team & 1-Year Warranty By Ultimate Rifle Build™ Feel that sense of accomplishment, with every pull of the trigger.™

Right hand model, fits all Post-98 Glock pistols with finger grips and rail (FGR) including Glock 29 and Glock 30, excluding all Glock 26, 27 and 33. SAF-T-BLOK slides behind the trigger, snaps in easily and stays firmly in place thus preventing accidental discharge. Saf-T-Block is quickly ejected by the trigger finger. Independent tests by Performance Shooting, Inc. showed that "0" time was added to draw and fire the weapon. Highly recommended for unconventional carry. Suggested use when carrying in a fanny pack or tucked in the belt, etc.

Overstock Sales! The steel gas block fit .750 barrel diameter and the finish is black nitride.

Aluminum 7 slot sectional attachment designed for use with all M-LOK compatible hand guards. Allows the attachment of various 1913 Picatinny spec rail-mounted accessories such as lights, vertical grips, etc.

Bad-ass looking choke tube specifically designed for the MARINE UTS-15 shotgun! SKU#: PS1BBL-TCM UPC#: 851799004041

Free ship on orders over $49 with code JANFREESHIP

Introduction Atlas Bipods are indispensable for hunters and shooters because they offer the much-needed support and stability while shooting. Make An Offer to purchase these unique accessories at the Best Price and enjoy Free Shipping on the entire range, including the immensely popular Atlas BT47LW17. Shop now.

The MagLink is a coupler for PMAG 30 AR/M4 GEN M2 MOE and GEN M3 magazines which allows the user to attach two magazines together for more efficient speed reloads, and to keep an additional 30 rounds of ammunition accessible on the weapon at all times. The MagLink features a two-piece bolt on design and durable, lightweight reinforced polymer construction. SKU #: MPIMAG595BLK

Forward assist and Dust cover assembly Complete Forward Assist Assembly with Spring & Pin. Complete Dust Cover Assembly Includes: Dust Cover Door, Hinge Pin, Hinge Pin Spring, & Snap Ring

Ghost Firearms AXE Muzzle Brake Stainless Steel 303 1/2 by 28 thread pattern (5.56/.223)

Laser Engraved AR parts , 20% off of Dust Covers , Charging Handles and hardware

- Built for 1911 handguns with the Recover CC3H grip and rail system - Compatible with most rail-mounted accessories - Allows for a natural draw Easily holster your favorite 1911 handgun that uses the updated Recover CC3H grip and rail system with the Passive Holster. Allows for a natural draw and is compatible with most rail-mounted accessories. Patent-pending Frame Locking System with universal railed accessories. Includes HC11 holster and CC3H grip and rail system. Item number#: IK-232543 SKU#: RCV-CC3HTN-R1BK UPC#: 024718511115

Is your AR-15 California complaint? This simple, inexpensive magazine lock ensures that your AR-15 complies with new CA requirements.

8/11/17: Orders placed from 8/11/17 - 8/25/17 will be shipped on 8/26/17. The store is on vacation. ------------------------------------------------------ FREE AND SAME DAY SHIPPING ON ALL PRODUCTS ON THE SITE This upper completion kit with delta ring assembly includes parts needed to assemble your AR15 upper receiver. AR15 EJECTION PORT DUST COVER ASSEMBLY KIT Includes: ejection port cover, ejection port hinge pin, cover spring and hinge pin snap ring FORWARD ASSIST ASSEMBLY KIT Includes: forward assist, spring and roll pin DELTA RING ASSEMBLY KIT

Simple and easy to use ar-15 gas block dimple tool. Works with any gas block that uses a 10-32 set screw. We feel that placing a dimple on your barrel is essential in making sure your gas block does not move. When your gas block is aligned properly, use the screw included to hold the gas block in place. At this point you can use the marking pin to locate the hole or simply run a 1/8" drill bit through the center of the screw to make your dimple. Includes: 1- set screw, 10-32, with center hole 1- marking pin instructions. ASIN#: B06WWQYBRH Model number#: EZ-GBDT

2 Inch Keymod Picatinny rail section with hex key for installation. ASIN#: B01L64ZHZG