AR15Discounts Coupon Codes, Discounts and Deals
(977 deals total)

OVERSTOCK
Expiration date Unknown Report
No Coupon Needed
Expiration date Unknown Report

Filter AR15Discounts Coupon Codes, Discounts and Deals

3 hours ago
Description PRODUCT DETAILS:  The War Dog Industries WRC-15 Advanced Lightweight Billet Upper and Lower set is precision cut from high strength billet 6061-T6 aerospace grade aluminum with an exceptionally lightweight design. Excess material has been removed wherever possible without reducing the integrity of the receivers, allowing this matched set to weigh in at just over 14 ounces. The lower is fully compatible with MIL-SPEC components. Featuring an integral enhanced trigger guard and receiver set tension set screw.
1
  • UPC:
  • MPN:
3 hours ago , by Dealer
*The parts in the product picture are not indicative of the lowest priced option, and are only examples of how you can build your upper.*
1
  • UPC:
  • MPN:
3 hours ago
The modular design of the AR-10 allows many parts to be upgraded with ease. The forend is one of the parts that is usually removed first. When the factory AR-10 handguard is replaced with the ODIN Works 17.5″ M-LOK 308 O2 Lite ‘Low Profile’ Handguard, it lowers the weight considerably. The ODIN Works O2 Lite was designed from the ground up to work with the most common DPMS type AR-10 uppers. There are two upper receiver configurations, the High Profile, and the Low Profile. The high profile receiver has a height of 2.06″ inches, whereas the low profile receiver is 2.00 inches in height.
0
3 hours ago
Description The Jumbo Shrimp Suppressor system by Q LLC uses a trademarked Quickie™ fast attachment design that allows a shooter “Jumbo” noise cancellation and rapid change out. Built with the precision shooter in mind, the Jumbo Shrimp suppressor is a short, lightweight suppressor built for the shooter looking for a noise cancellation solution that won’t overlengthen their favorite long-distance rifle. Features: - Up to 6.5mm - 1.75″ diameter - 9.2 oz. - Includes Quickie fast attach muzzle brake - 5.69″ length - Titanium construction - PVD finish
0
3 hours ago
Description The NBS .223/5.56 Black Nitride Bolt Carrier Group was designed with strength in mind. Starting with a 9310 Steel Bolt, which is aircraft-grade material, this bolt has a high core strength rating, a high fatigue strength, and a high hardenability rating. 9310 steel, when treated properly, is about 7% better than Carpenter 158 steel, so you know that you will have a dependable BCG, when you drop this into your rifle.
0
3 hours ago
The AR15 Stripped Upper Receiver is one of our most popular products. Forged from 7075-T6 aluminum, this stripped upper is precision machined to mil-spec M16/M4 specifications and features M4 feedramps. Match this upper with one of our AR15 lower receivers for a solid and dependable fit. Features: M4 Feedramps .250 takedown pin holes Laser engraved T-marks APAR501603C
0
9 hours ago , by Dealer
Description SAVE with this BREACH® Charging Handle and 5.56 Bolt Carrier Group bundle. Includes: - AR15 BREACH® Ambi Charging Handle w/ Large Lever – Black - 5.56 Bolt Carrier Group, Complete – Black Nitride Weight 17 oz MPN APSL100373S Bolt Material 9310 Steel Cartridge Compatibility .223/5.56 NATO/.300 BLK Finish Salt Bath Nitride Carrier Profile M16 Magnetic Particle Inspected Magnetic Partical Inspected Platform AR-15 Bolt Finish Salt Bath Nitride SKU: 15364
0
9 hours ago
This Aero Precision Lower Parts kit is a great starting point for finishing your AR-15 Lower Receiver. It includes all of the small parts and components you would typically find in a lower parts kit, but does not include the fire control group, trigger guard or pistol grip. This way you can choose your own grip, fire control group and trigger guard. Takedown/pivot Spring Takedown/pivot detent Takedown pin Pivot Pin Bolt Catch Bolt Catch Spring Bolt Catch buffer Bolt catch roll pin Safety Selector Safety Selector spring Safety Selector detent Buffer retainer
2
12 hours ago
Description The Aero Precision AR15 Complete Lower Receiver is the perfect base for your custom AR15 build. This complete lower features AR15 Gen 2 Lower and is upgraded to include a MOE SL Grip and MOE SL-K Carbine Stock. Save when you buy it complete and let our specialists do the installation for you! Specifications: - Made In America : Yes - Platform: AR15 - Receiver Extension: Carbine - Compatibility: Works with standard AR15 components and magazines Includes: - AR15 Gen 2 Lower Receiver - MOE SL Grip - MOE SL-K Carbine Stock - Lower Parts Kit
0
16 hours ago
Aero Precision's new Aero Precision M4E1 Threaded Upper Receiver (formerly known as the Gen 2 Upper receiver) gives you that angled billet look without the high cost or the fitment issues many builders experience when trying to mate a non-matching billet upper/lower receiver. Aero precision has machined this stripped upper to accept a standard AR15 barrel nut and mil-spec upper parts (Forward Assist & Dust Cover not included).
7
  • UPC:
  • MPN:
1 day ago
Description The Aero Precision standard AR-15 parts kit helps you to build a custom AR-15 from the ground up. Mil-spec dimensions and coating ensure the highest quality and correct component interface. Includes: - Takedown/pivot Spring - Takedown/pivot detent - Trigger/hammer pin - Takedown pin - Pivot Pin - Bolt Catch - Bolt Catch Spring - Bolt Catch buffer - Bolt catch roll pin - Safety Selector - Safety Selector spring - Safety Selector detent - Buffer retainer - Buffer retainer spring - Trigger guard - Trigger guard roll pin - A2 pistol grip
0
2 days ago
Description Here at AR15Discounts.com we work with a wide variety of machine shops and barrel manufacturers. When we come across a barrel maker we like, we will often decide to private label those barrels for resale under the NBS brand. We purchase these barrels in large quantities and then pass the savings on to our customers. Why buy an NBS Brand Barrel: - American Made – Sourced from a variety of Tier 1 Manufacturers here in the United States - Quality Control – All barrels are manufactured under ISO-9001 or better quality standards
0
  • UPC:
  • MPN:
2 days ago
DISCLAIMER: This product is not manufactured, authorized, endorsed, or warranted by GLOCK. GLOCK does not warrant or represent that this product is compatible with GLOCK pistols. Here at AR15Discounts.com we work with a wide variety of machine shops and barrel manufacturers. When we come across a barrel maker we like, we will often decide to private label those barrels for resale under the NBS brand. We purchase these barrels in large quantities and then pass the savings on to our customers. Why buy an NBS Brand Barrel:
0
4 days ago , by Dealer
For a limited time, take 15% off or entire site (excludes advertised specials and daily deals)! Save 15% off all AR-15 Parts here: https://ar15discounts.com/ https://ar15discounts.com/products/microbest-mil-spec-c158-hpt-mpi-5-56-bolt-carrier-group-phosphate-chrome-lined/ - $97.71 https://ar15discounts.com/products/anderson-am-15-stripped-upper-receiver/ - $42.46 https://ar15discounts.com/products/kak-slim-flash-can-1-2-28-1-200-dia-223-5-56-9mm/ - $21.21
0
  • UPC:
  • MPN:
5 days ago
Description Here at AR15Discounts.com we work with a wide variety of machine shops and barrel manufacturers. When we come across a barrel maker we like, we will often decide to private label those barrels for resale under the NBS brand. We purchase these barrels in large quantities and then pass the savings on to our customers. Why buy an NBS Brand Barrel: - American Made – Sourced from a variety of Tier 1 Manufacturers here in the United States - Quality Control – All barrels are manufactured under ISO-9001 or better quality standards
0
5 days ago
Description Dirty Bird Industries is excited to announce their new Dirty Bird Industries AR-15 Trigger 3.5lb Reduced Power Spring Set! Mil-Spec triggers have been used for decades, but have always suffered from an incredibly heavy trigger pull weight, that can be upwards of 7-8lbs. When installed, the Dirty Bird Industries AR-15 Trigger Reduced Power Spring Set is capable of producing a consistent 3.5lb trigger pull. The DBI Reduced Power Spring Set have been designed to work with single-stage triggers and will not work with two-stage triggers.
0
5 days ago
Description This Velocity Trigger for AR-15 rifles is a Single Stage Drop-In Trigger that provides a nice, clean & crisp 3lb trigger pull. The attractive price makes this quality AR-15 trigger achievable with any budget. Installation of this drop-in trigger is straight forward but be sure to use a set of anti-walk trigger pins as recommended by Velocity Triggers.
0
5 days ago
Description Mil-Spec Style M4 Carbine / USGI Polymer Collapsible Stock Weight 0.0000 oz MPN TBA04 SKU: 1335
0
5 days ago
Description Don’t let a missing detent or spring put your build on hold! We recommend always having one or two of these on-hand. LIMIT: 1 Per Order – Orders with more than 1 each may be canceled or refunded accordingly. OOPS! Kit Includes:
1
6 days ago
AR15Discounts is proud to carry APOC Armory BCG’s with Bolts made from heavy duty 9310 Alloy Steel and Bolt Carriers from 8620 case-hardened aircraft grade steel. 9310 steel has a high core strength rating, high fatigue strength, and a high harden-ability rating overall, which makes it about 7% stronger than Carpenter 158 steel, when treated properly. The Carrier is made out of 8620 Steel, which is is what you typically find in military aircraft.
0
  • UPC:
  • MPN:
1 week ago
Description Anderson Manufacturing Complete M16 Bolt Carrier Group – Nitride Nitrided M16 Bolt Carrier Group, made from 8620 steel, Bolt is made from 9310 steel MPI Tested. The 223 Bolt and Bolt Carrier Assembly comes complete with cam pin , firing pin and firing pin retainer. - .223 / 5.56 bolt assembly is compatible with .300BLK as well! - Fully mil-spec construction - Durable Nitride finish - 9310 steel bolt is MPI tested - 8620 steel full-shroud M16 style bolt carrier - Properly staked gas key Weight: 0.0000 oz Bolt Finish: Nitride / Melonite
0
1 week ago
Description Aero Precision’s new Aero Precision M4E1 Threaded Upper Receiver (formerly known as the Gen 2 Upper receiver) gives you that angled billet look without the high cost or the fitment issues many builders experience when trying to mate a non-matching billet upper/lower receiver. Aero precision has machined this stripped upper to accept a standard AR-15 barrel nut and mil-spec upper parts (Forward Assist & Dust Cover not included). M4E1 Features: - New enhanced forging that gives the upper receiver a “billet look”
0
1 week ago
The AM-15 Stripped Upper Receiver is machined from 7075 T6 Aluminum forging. Featuring M4 feed ramps, this upper receiver is machined to Military Specifications & Standards and can be used with multiple calibers on the AR-15 platform. This upper receiver comes in type III hard coat black anodize.7075-T6 Forged Aluminum Hard Coat AnodizedM4 Feed RampsWeight: .442 lbs SKU#: 1371
19
1 week ago
Description Brand Ballistic Advantage Length 16″ Chamber 5.56 NATO (shoots both 5.56 NATO and .223) Profile GOVT / SOCOM Finish QPQ Nitride Barrel Steel 4150V Chrome Moly Twist Rate 1:7 Gas System Length Mid-Length Gas Block Journal .750 Feed Ramp Extension M4 Muzzle 1/2 X 28 Weight 28oz MPN BABL556015M Finish Nitride / Melonite Barrel Profile Government / SOCOM Gas System Length Midlength Gas Block Journal 0.75 Barrel Length (inches) 16 Barrel Chamber 5.56 NATO Twist Rate 1:7 Muzzle Thread Pattern 1/2×28 SKU: 1451
1
1 week ago , by Dealer
For a limited time, take 15% off all triggers (excludes advertised specials and daily deals)! Save 15% off all AR-15 Triggers here: https://ar15discounts.com/collections/lower-parts/triggers/?fwp_stock_status=1
0
  • UPC:
  • MPN:
1 week ago
- Trigger / Hammer Pins (x2) - Takedown Pin - Pivot Pin - Takedown / Pivot Pin Springs (x3) - Takedown / Pivot Pin Detents (x3) - Safety Selector Detent - Safety Selector Detent Spring - Magazine Catch Spring - Trigger Guard Roll Pin - Bolt Catch Detent - Bolt Catch Detent Spring - Bolt Catch Roll Pin - Buffer Retainer / Detent - Buffer Retainer / Detent Spring Backed by Dirty Bird Industries’ Limited Lifetime Warranty  100% American Made Weight 0.0000 oz MPN D013 SKU: D013
0
1 week ago
Description The AR15 Enhanced Carbine Buffer Kit with your choice of Heavy Buffer is the perfect option when you’re aiming to dial in the operation of your rifle build. This kit highlights the Aero Precision Enhanced Carbine Buffer Tube that delivers features that increase the reliability, security, and simplicity of your build.
0
1 week ago
Description The AR15 Enhanced Carbine Buffer Kit is the perfect complement to standard AR15 rifle builds. This kit highlights our Enhanced Carbine Buffer Tube that delivers features that increase the reliability, security, and simplicity of your build. AR15/AR10 Enhanced Carbine Buffer Tube Features:
0
1 week ago
Description The VLTOR A5 buffer system is one of the most tried-and-true buffer systems available in the AR-15 world today. The A5 buffer was specifically designed at the request of the Marine Corps to bring an adjustable stock to their 20” M16 rifles. VLTOR brought them a completely new buffer system that used a rifle-length spring in an adjustable receiver extension tube. This translates to a smoother, slower bolt movement that reduces felt recoil and allows shooters to keep on target. Features: - VLTOR patented design - Body of the buffer is 7075 T6 aluminum
0
1 week ago
Description The M5 .308 Assembled Upper Receiver comes with both the port door and forward assist hardware pre-installed. Forged from 7075-T6 aluminum, this assembled upper is precision machined to accept standard .308 components and is the perfect upper for your big bore build. Match this with our M5 .308 lower receiver for a solid and dependable fit. Features: - M4 Feedramps - .2795 takedown pin holes - DPMS High Profile (.210) Tang - Includes port door and forward assist Includes: - M5 .308 Assembled Upper Receiver Weight: 0.3600 oz Color: Black, FDE
0
1 week ago
Description The M4E1 Complete Lower Receiver is the perfect base for your custom AR15 build. This complete lower features our custom designed M4E1 Lower Receiver and is upgraded to include a MOE SL® Grip and MOE® SL-S™ Carbine Stock. Save when you buy it complete and let our specialists do the installation for you! Includes: - M4E1 Stripped Lower Receiver - MOE SL® Grip - MOE® SL-S™ Carbine Stock - Lower Parts Kit - Carbine Receiver Extension - AR15 Carbine Buffer and Spring - These parts are installed
0
1 week ago
Description Barrel nut, 2x install screws, CamLock fastener, and barrel nut wrench included. *Does not come with anti-rotation pin for use with NBS Slick Side Billet Upper Receiver. Anti-rotation pin can be found below: 98381A470 – NBS/Dirty Bird Gen 2 Handguard Anti-Rotation Pin – AR15Discounts
0
  • UPC:
  • MPN:
1 week ago
Description The M4E1 Threaded Upper Receiver features a new angular machined design that helps it stand apart from standard mil-spec upper receivers. This upper receiver features the same enhanced body profile as our M4E1 Enhanced Upper Receiver but is threaded to accept a standard AR15 barrel nut. It is forged from 7075-T6 Aluminum, precision machined to work with all mil-spec AR15 parts and includes the port door and forward assist pre-installed.
1
1 week ago
Fall Overstock Sale - Save Extra 15% Off w/Code "OVERSTOCK" Promo code can not be combined with daily deals. Some restrictions apply.
0
  • UPC:
  • MPN:
1 week ago
Description The M4E1 Lower Receiver delivers billet aesthetics in a forged package. This custom designed enhanced forging is machined from 7075-T6 Aluminum and compatible with all mil-spec AR15 parts. Aside from the visual upgrades this custom engineered design provides that challenge much more expensive billet options, Aero has added several functional features to the lower receiver to simplify the assembly process for the at home builder. M4E1 Lower Receiver Improvements:
0
1 week ago
Description The Aero Precision AR15 Gen 2 Stripped Lower Receiver is the perfect base for your custom AR15 build. Machined to mil-spec dimensions, these lowers work with standard AR15 components and ensure the highest quality with a correct component interface. Gen 2 Improvements - Upper Tension Screw – Allows users to fine tune the fit of the upper and lower receiver through the use of a nylon tipped tensioning set screw inserted in the grip tang of the lower receiver. This provides a tight fit with any standard AR15 upper receiver.
0
1 week ago
Description Our AR15 Complete Lower Receiver is the perfect base for your custom AR15 rifle. Save when you buy it complete and let our specialist do the installation for you! Specifications: - Made In America : Yes - Platform: AR15 - Finish: Anodized Black - Receiver Extension: Carbine - Compatibility: Works with standard AR15 components and magazines - Weight(S): 33.15 oz Includes: - AR15 Gen 2 Lower Receiver – Anodized Black - M4 Stock – Black - A2 Grip – Black - Mil-spec Lower Parts Kit - Carbine Receiver extension - AR15 Carbine Buffer and Spring
0
1 week ago
Description The Dirty Bird PCC (9mm / .45)  Receiver Extension / Buffer Kit cuts no corners. It features a true Mil-Spec 6-Position Receiver Extension (buffer tube) machined from American Made 7075-T6 Aluminum, 8oz Extended Recoil Buffer w/ tungsten / steel counter weights, a chrome silicon buffer spring, hardened castle nut with staking cuts and mil-spec end plate.
0
2 weeks ago
You’re looking at the NBS 4″ 9mm Medium Profile QPQ Nitride Barrel. We sell hundreds of varieties of barrels from many top manufacturers and the ones we like the most end up as NBS barrels. We buy these in large quantities and re-brand them so we can bring them to our loyal customers at a fraction of the cost.
0
2 weeks ago
Description A quality upper assembly without cutting corners. This means starting with a top tier mil-spec forged upper receiver, using a steel gas block as opposed to aluminum, quality American Made M-LOK handguards (handguard style may vary) and one of the nicest nitrided A2s you’ll find anywhere. This also means taking the time to ensure that the upper will function reliably. We use Permatex 242 on key components while using mil-spec AEROSHELL 33MS Anti-Seize grease on the properly torqued barrel nut and muzzle device.
0
  • UPC:
  • MPN:
2 weeks ago
Here at AR15Discounts.com we work with a wide variety of machine shops and barrel manufacturers. When we come across a barrel maker we like, we will often decide to private label those barrels for resale under the NBS brand. We purchase these barrels in large quantities and then pass the savings on to our customers. Why buy an NBS Brand Barrel: American Made – Sourced from a variety of Tier 1 Manufacturers here in the United States Quality Control – All barrels are manufactured under ISO-9001 or better quality standards
0
2 weeks ago , by Dealer
*NEW: Now comes with the Dirty Bird Industries AR-15 Trigger Reduced Power Spring Set When installed, the Dirty Bird Industries AR-15 Trigger Reduced Power Spring Set is capable of producing a consistent 4.0-4.5 lb trigger pull.
0
2 weeks ago
Description A titanium AR15 BCG offers you the strength and durability of steel at a fraction of the weight. Add the Rubber City Armory Titanium BCG’s proprietary nitride finish and you have a bolt carrier group that is lightweight, smooth, and tough as steel. FEATURES: - Strong, easy-to-clean, enhanced heat treated Blackntride finish inside and out - Aerospace surface treatment provides ultimate durability and wear resistance - Lighter and stronger than standard Mil-Spec steel bolt carrier group - Precision machined bolt - Billet gas key properly torqued and staked
0
2 weeks ago
Description This is the Strike Industries Cookie Cutter Comp muzzle brake and compensator for .223/5.56. As with most Strike Industries products, this muzzle device is unique looking and edgy but also effective. Form and function in one. Fantastic muzzle brake for SBR or Pistol Builds. Based on the theory, law of action and reaction (Newton’s 3rd law), Strike Industries created a large reflecting area to enlarge great “reaction” to eliminate recoil force.
0
2 weeks ago
Aero Precision M4E1-T Complete Upper, 18" .223 Wylde Fluted Barrel, 15" M-LOK ATLAS S-ONE HG - Anodized - This complete upper includes our new ATLAS S-ONE Handguard! The S-ONE line of handguards are designed with size and weight in mind, providing the perfect addition to your lightweight build. Our proprietary ATLAS attachment system is a durable and dependable mounting platform, maintaining a slim profile while still providing the strength and stability customers have grown to love from Aero Precision handguards. SKU# 2432
1
2 weeks ago
Description Mil-spec AR-15 Forward Assist & Dust Cover Upper Parts Kit sourced from Top Tier Supplier of Military and OEM Manufacturers. Forward Assist Assembly Kit includes: - Forward assist assembly w/ tool steel prawl - Spring - Installation roll pin Port Door Kit includes: - Ejection Port Cover Door (Dust cover) - Steel Spring - Steel Rod - C-Clamp - Fits: AR-15 Brand nbs SKU: BUNDLE-NBSU
0
  • UPC:
  • MPN:
2 weeks ago
Description The SI Sail Comp is a high efficiency single chamber brake.  The Sail comp derives its name from the unique baffle shape that redirects muzzle gasses out and upward providing recoil mitigation and muzzle rise control.  The Sail Comp packs the performance of larger, heavier devices into a compact, lightweight package. Package includes: – 1x SI Sail Comp – 1x Crush Washer Product Spec: – Length: 1.575″ – Width/Height: 0.98″ – Length Added To Weapon (without crush washer): 0.90″ – Bore Diameter: 0.26″ – Weight: 3.4 oz net, 3.6 oz gross – Thread Pitch: 1/2×28
0
2 weeks ago
Description Here at AR15Discounts.com we work with a wide variety of machine shops and barrel manufacturers. When we come across a barrel maker we like, we will often decide to private label those barrels for resale under the NBS brand. We purchase these barrels in large quantities and then pass the savings on to our customers. Why buy an NBS Brand Barrel: - American Made – Sourced from a variety of Tier 1 Manufacturers here in the United States - Quality Control – All barrels are manufactured under ISO-9001 or better quality standards
0
3 weeks ago
Description Similar to a standard Mil-Spec style Ambi Safety but with one lever scalloped. The scalloped lever can be placed on either side of the rifle so it is less intrusive on strong-side of the weapon. - Hardened Steel - Made in the USA Weight: 0.0000 oz Color: Black, Midnight Bronze, OD Green SKU: D001
0
  • UPC:
  • MPN:
3 weeks ago
Description If you are trying to find the right buffer spring/buffer weight combo for your next SBR or a midlength gas system rifle, the Dirty Bird Optimized Buffer Kit is the way to go. Utilizing a Sprinco Blue Enhanced Power Spring and a H2 buffer, we have found the perfect combo to reduce the cyclical rate, reduce recoil, and insure proper ejection to keep your rifle running smooth as butter. Includes: Blue Sprinco Medium “Enhanced” Power Spring
0
3 weeks ago , by Dealer
Description The M4E1 Complete Lower Receiver is the perfect base for your custom AR15 build. This complete lower features our custom designed M4E1 Lower Receiver and is upgraded to include a MOE SL® Grip and MOE® SL-S™ Carbine Stock. Save when you buy it complete and let our specialists do the installation for you! Includes: - M4E1 Stripped Lower Receiver - MOE SL® Grip - MOE® SL-S™ Carbine Stock - Lower Parts Kit - Carbine Receiver Extension - AR15 Carbine Buffer and Spring - These parts are installed
0
3 weeks ago
Description Strike Industries AR-15 Lightweight Extended Forward Assist
0
  • UPC:
  • MPN:
3 weeks ago
Description The Dirty Bird Industries Lancer L5AWM +5 Magazine Extension w/ Assist is the latest product from Dirty Bird Industries to improve the performance of the AR-15.
0
3 weeks ago
Description Our lower parts kit helps you to build a custom AR15 from the ground up. Mil-spec dimensions and coating ensure the highest quality and correct component interface. Our upgraded Enhanced Lower Parts Kit features a Magpul MOE Grip and Aero Precision Billet Trigger Guard. Includes: - Takedown/pivot Spring - Takedown/pivot detent - Trigger/hammer pin - Takedown pin - Pivot pin - Bolt Catch - Bolt Catch Spring - Bolt Catch buffer - Bolt catch roll pin - Safety Selector - Safety Selector spring - Safety Selector detent - Buffer retainer
0
3 weeks ago
Description In building or upgrading an AR platform rifle, the bolt is, in many ways, the heart of the rifle. A quality bolt is part of what will make a rifle reliable, so it makes sense that the bolt and its carrier are one of those parts that precision manufacturing has really helped make into a part that can last for high round counts. If you’re looking to upgrade the bolt in your AR, consider the Rubber City Armory Titanium 5.56/.223 Bolt Carrier Assembly .
1