Midway USA Coupon Codes, Discounts and Deals

(191 deals total)

The fastest, most accurate, ultra-compact micro reflex sight - the ROMEOZero has been optimized for everyday concealed carry and pistols with slim slide profiles. The sight features a ruggedized, WeaponsGrade textured polymer body and the SpectraCoat HD Polymer lens system. The ROMEOZero enables rapid target acquisition in an everyday carry package at an iron sight price. Features: - SpectraCoat HD Polymer Lens with 10 times the impact resistance over traditional glass lenses

The ROMEO-MSR is a sealed compact red dot or green dot sight intended for MSR, carbine, shotgun and air rifle. Brightness is adjusted with a top-mounted rotary dial, featuring 10 daytime and 2 night vision settings for quick target engagement in any condition. Features: - High-performance lens coatings for excellent light transmission and dot contrast in any situation. - Ultra-compact size and weight with unlimited eye-relief and parallax-free operation. - Precise 2 MOA Dot - Slipover, see-through flip-backs

The Delta Series 10-Piece Roll Pin Installation kit is a must have if you're working on a new build or replacing parts on your AR-15. Wheeler Engineering has included every tool needed for installing all the AR roll pins without damaging or marring your firearm!   Kit Includes: - Bolt Catch Install Tool Kit - AR Trigger Guard Install Tool - 3 Starter Punches and 3 Driver Punches - Two Sided Hammer - 6 Steel punches in sizes: 1/16, 5/16 & 3/32" - 3 with counter-bored tips to start roll pins - 3 with indexing tips to finish roll pins   MPN#: 422840 UPC#: 661120526360 952636

The versatility the Burris Signature HD 3-15x44 scope shines for shooters needing bright, clear view sat a wide range of distances. The choice of either the Ballistic E3 Illuminated or Plex reticle delivers accurate shots both near and far. Precise side parallax focus, push/pull and zero-stop locking turrets give shooters complete control.   MPN#: 742572 UPC#: 000381005311 200531

Sig is proud to provide our men and women in the armed forces with a light-weight, enclosed red-dot sight that is as tough as it is micro. The ROMEO5 features Sig's MOTAC (Motion Activated Illumination) which increases battery life by shutting down the system when not in use and instantly activates the system when it senses the slightest vibration or movement. Your sight will be up when you go into action. The ROMEO5 will mount on any platform and the solid aluminum design will give peak performance and years of service. Military units trust the ROMEO5 when it counts, so why wouldn’t you?

Established in 1933, IMI is a defense systems house specializing in the development, integration, manufacturing and life cycle support of modern land, air and naval combat systems and HLS solutions. IMI's world class combat-proven systems are developed by vertically integrated expert teams, working in close cooperation with the customers, the most prominent being the Israel Defense Forces (IDF). IMI's products have been qualified with the IDF, US Military (Air Force, Army and Navy) and NATO nations.

A BattleAx for the 21st Century: the new TROY Tomahawk Stock. The Tomahawk is a modern, combat-tactical, PDW-style retractable stock with an integrated cheek piece that elevates 5.56/.300 Blackout and 7.62 carbines, making them powerful, compact and ultra lightweight.  

The Lauer Custom Weaponry AR-15 Stripped Lower Receiver is forged for LCW by Lewis Machine and Tool, a well known name in the AR business. Machined to mil-spec dimensions, LCW lowers work with standard AR15 components and ensure the highest quality with a correct component interface. This Lower Receiver comes in type III black hard anodize, and an Open Trigger Guard. These Stripped Lower Receivers are the perfect base for your custom AR15 build. Don’t pay more for the same lower receiver with a different logo and use the money saved elsewhere on your build! MPN#: 986006

Overview1YearMidwayUSA Exclusive Brand WarrantySwenson Glock slides are precision machined from stainless steel for a drop-in fit. Slides are shipped in a stripped configuration with no internal components, ready for standard factory replacement parts or a variety of aftermarket performance parts (including sights). These slides also feature a melonite finish, forward cocking serrations, and a snag-free bullnose profile. Made In {{countryOfOrigin}}

Since 1928, Prvi Partizan has been producing custom ammunition in Serbia for competition, indoor ranges and hunting. Full metal jacket loads are non-expanding rounds that were designed for target shooting. This ammunition is new product, non-corrosive, in boxer primed, reloadable brass cases. MPN#: 373939 UPC#: 8605003812838 PP76239F

The Lee Deluxe Handgun 4-Die Set is a great set of reloading dies for anyone looking for a set of dies that will reload accurate ammunition every time the dies used. Each Deluxe 4-Die Set comes packaged with a carbide full length sizing die with decapping unit, powder through expanding die (used for expanding and belling the case mouth while charging the case with powder), a bullet seating die, and Lee's exclusive carbide Factory Crimp Die. The carbide Factory Crimp Die is that final step to make sure each round with positively chamber freely with factory-like dependability.

The Rise Armament Super Sporting Trigger (SST) Don't Tread on Me Gadsden Flag is a high-performing, cost-effective upgrade to replace mil-spec triggers. It has a clean break with a short reset and comes with anti-walk pins for installation. The triggers are manufactured and assembled in Rise Armament’s facility according to strict AS9100 aerospace requirements, which are more stringent than standard gun manufacturing requirements. They are backed by a backed by a lifetime guarantee through Rise Armament.   Note

Its solid, dependable action makes it America’s favorite, and our continual upgrades make it the most advanced, well-rounded family of pump shotguns around. Along with continually evolving designs, this shotgun’s superiority is a matter of rugged dependability, great pointing characteristics and versatility. In fact, the Model 870 has been the standard for slide-action performance for more than 60 years. Features Standard Express finish on barrel and receiver Shoots both 2-3/4" and 3" shells Modified Rem Choke Single bead sight Remington logo Made In United States of America

This Bear Creek Arsenal AR-15 A3 Carbine has a 16" M4 contour barrel made of 4150 chrome moly vanadium steel with a parkerized finish, a 1:8 twist rate and a carbine gas system. The assembly includes a 15.25" MLOK rail, an m4 flat top forged upper receiver with forward assist, a bolt carrier group, a flash hider, a charging handle, and a complete lower assembly. It is chambered in 5.56 NATO and machined with M4 feed ramps in the barrel extension. Features - 30 round magazine - M4 feed ramps - Carbine length gas system - 0.750" Gas block diameter - Barrel dimpled for gas block

The Lee Loadmaster Progressive Press reloads both rifle and handgun cartridges with ease and has enough clearance for even the largest magnum rifle cases. It can be used as an automatic indexing progressive press or as a single stage press, and the five stations accept most popular reloading dies. Dies are held by a detachable turret that allows them to be removed and reinserted without adjusting. Dies and shellplates sold separately. This press comes with the press, carrier and five-hole turret only. 734307901837 90183 671219

AR-STONER™ offers replacement components for the AR-15 that are made to strict military specifications. These high quality components provide excellent fit and reliable function in your AR series platforms. These AR-STONER™ parts are perfect for upgrading existing components or replacing worn or broken parts.   Includes: Charging Handle, Latch, Latch Spring, Latch Roll Pin   Features - Mil-Spec Part - Great for New Builds or Replacing Worn Parts - Dependable Parts at an Incredible Price MPN#: 247923 AR15CHARGINGHANDLE6061

The Lehigh Xtreme Defense (XD) Technology is based on the popular Xtreme Penetrator product line. The design goal was to achieve the same barrier performance and massive permanent wound cavity and reduce the penetration depth to coincide with an individual's personal comfort level. It was a goal Lehigh did not meet; it was a goal they blew out of the water!  

Law enforcement, tactical professionals, and those seeking the highest level of performance for self-defense will find the patent-pending combination of the NovX stainless steel case and poly/copper matrix projective delivers more power, more velocity, greater accuracy, less recoil, and more devastating terminal performance than ever thought possible.  

Designed for concealed carry, the M&P Shield Plus is the most advanced M&P Shield pistol to date, featuring a magazine capacity up to 13 rounds in a slim, micro-compact frame. Packed with popular features such as a flat-face trigger, large capacity magazine, optics cuts, and more, the M&P Shield Plus product line has been designed to meet the needs of today’s firearm consumer.  

This AR-Stoner M4-Contour AR-15 Barrel is fully chambered and ready for installation onto a host upper receiver. The barrel features a true 5.56x45mm NATO Chamber for use with both commercial and military surplus ammunition, while the 1 in 8" Twist Rifling is capable of stabilizing light to medium weight projectiles of up to about 69 grains. This barrel is an excellent choice for a low budget, general purpose AR rifle build that's perfectly suited for use at the range, in a 3-Gun match, or in the field pursuing game. Barrel extension and locator pin are both included and factory installed.

Machined from forged 7075-T6 aluminum to Mil. Specs. Comes complete with forward assist and dust cover assembly installed. Satin finish. NOTE: Does not include M4 feed ramps. Product #: 191605 Double Star #: AR220 - Matte

Cartridge 224 Valkyrie Grain Weight 75 Grains Quantity 200 Round Configuration (10 Boxes of 20) Muzzle Velocity 3000 Feet Per Second Muzzle Energy 1499 Foot Pounds Bullet Style Full Metal Jacket Lead Free No Case Type Brass Primer Boxer Corrosive No Reloadable Yes Test Barrel Length 24 Inches Velocity Rating Supersonic Country of Origin United States of America

Get the performance of original factory stainless steel magazines like the ones you received with your Kimber Micro .380 Pistol. Six-round and seven-round sizes available. Per each. Product #: 941950 Manufacturer #: 1200163A UPC #: 669278121635 941950

The AR-STONER™ Precision Muzzle Brake counters the recoil of your AR-10, LR-308 Build. Constructed of solid steel, this muzzle brake has a melonite finish to products against damage from heat and corrosion. Six horizontal ports reduce felt recoil and three top ports lessen muzzle rise. Keep your sights on target with the AR-STONER™ Precision Muzzle Brake. Features - Solid Steel Construction - Melonite Finish - 6 Horizontal Ports - 3 Top Ports Note: Does not come with crush washer MPN#: 131328 Muzzle-Brake-308-Precision

Remington High Performance Rifle series consists of a multitude of calibers and popular bullet styles to match your specialized hunting and shooting pursuits. All assembled with premium components and the ultra-tight tolerances that put more home reloading presses on the back shelf than any other brand. This ammunition is new production, non-corrosive, in boxer primed, reloadable brass cases.   MPN#: 823562 UPC#: 047700353203

Full Metal Jacket Bullets are designed so that the bullet is completely encased in a hard metal jacket (except for the base), which is not intended to expand upon impact. The Boat Tail design is to provide a flatter trajectory and long range performance by raising the ballistic coefficient. These bullets are primarily used for target shooting and plinking. Also ideal for varmint hunting, this bullet will deliver deep penetration and bone shattering results while also protecting the integrity of the pelt at the same time. This is not loaded ammunition. Technical Information:

This AR-STONER EV2 Pistol Upper Receiver Assembly in 9mm Luger is being offered at an exceptional price! This AR-STONER upper features  and a medium profile barrel. The upper also features an enlarged ejection port engineered for improved reliability and trouble free ejection. The upper will attach to virtually any standard AR-15 lower receiver, and with the addition of a 9mm magazine adapter block you can be range ready in just a few minutes. The AR-STONER AR-15 EV2 Billet Upper Receiver Assembly in 9mm Luger comes complete with charging handle and M-LOK handguard.

The easily concealed Kimber Micro 9 features mild recoil, smooth trigger pull and the intuitive operation of a 1911. The Micro 9 Group of pistols put legendary Kimber dependability into a small 1911-like platform. The 9mm power and simple operation make these pistols an ideal choice for many shooters. A wide variety of models are available, providing a selection of features that meet virtually any need. Collectively, they are among the finest ultra-compact 9mm hammer-fired pistols anyone can carry.  

The easily concealed Kimber Micro 9 features mild recoil, smooth trigger pull and the intuitive operation of a 1911. The Micro 9 Group of pistols put legendary Kimber dependability into a small 1911-like platform. The 9mm power and simple operation make these pistols an ideal choice for many shooters. A wide variety of models are available, providing a selection of features that meet virtually any need. Collectively, they are among the finest ultra-compact 9mm hammer-fired pistols anyone can carry.  

OverviewFeaturesConvenient 30 round boxes completely fill standard capacity magazinesNATO qualifiedDesigned for use in 5.56mm Rifles and machine guns with 1 in 7" twist, such as M16A2, M4 and TavorMeets all STANAG 4172 and PFP (NAAG-LG/3-SG/1) D(2004)1 requirements Established in 1933, IMI is a defense systems house specializing in the development, integration, manufacturing and life cycle support of modern land, air and naval combat systems and HLS solutions.

Norma USA TAC-22 ammunition is precisely manufactured to deliver outstanding performance time and time again. The 40 Grain round nose is perfect for target shooting at the range or for use on small varmints. This ammunition is new production and non-corrosive. Note: Quantity of 500 is 10 boxes of 50 Quantity of 5000 is 10 boxes of 500 Technical Information Caliber: 22 Long Rifle Bullet Weight: 40 Grains Bullet Style: Lead Round Nose Ballistics Information: Muzzle Velocity: 1100 FPS Muzzle Energy: 110 ft lbs Product #: 137278 Norma #: 2318716

The Kimber K6s revolver brings an unmatched level of performance and shootability to concealed carry. With the smallest cylinder capable of holding 6 rounds of .357 Magnum (also compatible with .38 Special), K6s compact revolvers are ideal for back-up, concealed carry and home defense. The Kimber K6s’ small frame and 1.39 inch diameter cylinder are machined from the finest stainless steel for superior integrity, strength, and resistance to the elements.

- 500 lumens; 140m beam; runs 1.5 hours - Custom optic produces a concentrated beam with optimum peripheral illumination - Ambidextrous on/off switch - TLR-7 side switch model cannot be retrofitted to the the TLR-7A rear switch models - Uses one CR123A lithium battery (included) - Safe off feature prevents accidental activation; saves batteries - Rail grip clamp system securely attaches/detaches quickly and safely with no tools and without putting your hands in front of muzzle - Securely fits a broad range of full-sized and compact guns

This Battle Arms Development Titanium Bolt Carrier Group fills the space of an M16 profile while reducing weight substantially. The ArmorTi coating is an Aerospace surface treatment that provides ultimate durability and wear resistance.   Features - Bolt material 9310 - Billet gas key torqued and staked. - Tool steel extractor and cam pin   MPN#: 248086 UPC#: 810033781179 BAD-BCG-M16-TI

The Crimson Trace CMR-207 Rail Master Pro offers a powerful 400 Lumen LED white light and aiming laser in a compact and durable unit. The CMR-207 features an aluminum body with ambidextrous activation points. User programmable modes of operation include: Laser + Light, Laser Only, Light Only. This Rail Master Pro features smart electronics that will power down the unit after 5 minutes, (preventing battery drain if activated during casing or holstering). Laser sight is fully user adjustable for windage and elevation. Powered by a single CR123A Lithium battery. 610242009268 CMR-207 103721

Cartridge 9mm Luger Grain Weight 90 Grains Quantity 20 Round Muzzle Velocity 1400 Feet Per Second Muzzle Energy 392 Foot Pounds Bullet Style Fluted Bullet Brand And Model Lehigh Xtreme Defense Lead Free Yes Case Type Nickel Plated Primer Boxer Corrosive No Reloadable Yes

Federal Premium has drawn from its 95 years of ammunition manufacturing excellence to develop a cartridge that transforms the MSR 15 platform, unleashes shooters’ long-range potential and shatters the boundaries of ballistic performance. The 224 Valkyrie provides extremely flat trajectories and match accuracy beyond 1,300 yards. The cartridge offers significantly less wind drift and drop than other loads in its class, as well as less than half the recoil of cartridges with comparable ballistics.

Cartridge 223 Remington Grain Weight 55 Grains Quantity 1000 Round Configuration (Bulk) Muzzle Velocity 3240 Feet Per Second Muzzle Energy 1282 Foot Pounds Bullet Style Full Metal Jacket Lead Free No Case Type Brass Primer Boxer Corrosive No Reloadable Yes G1 Ballistic Coefficient 0.202 Velocity Rating Supersonic Country of Origin United States of America

The SB Tactical Buffer Tube Folding Adapter (BTFA) is designed for use with all buffer tube receptacles, but NOT compatible with AR platforms. The SB Tactical Buffer Tube Folding Adapter features a low-profile design, reversible, lockable, made from 6061 Type III anodized aluminum and is designed for use with all buffer tube receptacles other than AR platforms.  MPN#: 713446 UPC#: 699618782806 BTFA

The Leupold Mark 4 Long Range Tactical Rifle Scope was designed for military and law enforcement applications with increased elevation adjustment for long range shots. The scope features tall tactical turrets, the Multicoat 4 Lens System and is water, fog and shockproof. The Mark 4 Rifle Scope is covered by Leupold's Full Lifetime Guarantee. MPN#: 936654 UPC#: 030317600051 60005

The SureFire Suppressor Trainer mimics the length, weight, and attachment of a SOCOM556-RC or SOCOM556-RC2 suppressor. This product is intended for use with marking cartridges (e.g. Simunition FX), training ammunition (e.g. SRTA), frangible and live ammunition in a training environment. The Trainer is made from stainless steel with a Cerakote finish and provides no sound reduction.   Features - Patented Fast-Attach design attaches and removes in seconds - Mimics the size and weight of SOCOM 556-RC or SOCOM 556-RC2 - Constructed of Stainless Steel - Long Service Life

While taking advantage of state of the art testing equipment, this high performance ammunition by Underwood is field tested using popular, real firearms that customers are most likely to own out in the real world with all the elements you would experience. If for some reason Underwood Ammunition fails to meet performance expectations, Underwood stands by their product 100% and will make sure the customer is satisfied with every purchase. This ammunition is new production, non-corrosive, in boxer primed, reloadable nickel plated brass cases.

The Beretta APX Pistol Family is now available in a single stack sub-compact profile. The APX Carry pistol extends the proven APX Series to a sub-compact carry size. The APX Carry comes standard with a 6+1 (Flush or with pinky extension) and an 8+1 (Extended) magazine. As with all APX pistols, the Carry has been designed specifically for military and law enforcement users who have a need for ultra concealment but want similar handling characteristics and ergonomics to their duty pistols.

The Crimson Trace 5-Series is a feature rich 3-18x 50mm mid-range rifle scope that has been purposefully built from the ground up. The scopes First Focal Plane (FFP) and impressive ED glass makes for an unparalleled shooting experience. The custom designed MR1-MIL advanced reticle is fully illuminated and offers quick hold-over points for windage and elevation. The exposed 1/10 MIL turrets provide a precise and rugged feel when dialing for the most accurate of shots.

America's favorite riflescope just got better. VX3i brings legendary Leupold Gold Ring performance to a new level. Twilight Max Light Management System provides maximum brightness in all colors and intensified contrast across the entire field of view. Dual Spring Precision Adjustments perform with match grade precision. The 30mm maintube dramatically increases windage and elevation travel while the side focus parallax adjustment makes fine tuning parallax effortless.

MidwayUSA is proud to offer this AR-STONER Optics Ready Upper Receiver Assembly in 450 Bushmaster at an exceptional price! This AR-STONER carbine length upper features a 450 Bushmaster bolt carrier group, parkerized finish, low profile gas block, and a heavy profile barrel. The A3 upper will attach to virtually any standard AR-15 lower receiver and comes complete with charging handle, forward assist, ejection port cover, A2 flash hider, bolt and bolt carrier assembly. Supplied without a rear sight, this upper is a great platform for a red dot sight or iron sights (both sold separately).

The Barnett Explorer XP370 Crossbow Package series introduces impressive power and performance in an affordable crossbow package. The XP370 features an anti-vibration foot stirrup and adjustable butt stock, with compression-molded limbs allowing the compound crossbow to reach speeds up to 370 feet per second. It all combines into an overall shooing experience that’s truly next level. The sleek, blacked-out crossbow comes ready-to-hunt with two carbon arrows, red dot sight, rope cocking device and lightweight quiver all included. Features - Crank Cocking Device Compatible

Speer Gold Dot Ammunition is loaded with bonded core bullets and designed for home defense and personal protection. Bonding the jacket to the core means the elimination of core-jacket separations and superior weight retention. This ammunition is new production, non-corrosive, in boxer primed, reloadable brass cases. MPN#: 685711 UPC#: 604544647297 23970GD

Del-Ton AR-15 Pistol A3 Flat-Top Upper Assembly 5.56x45mm NATO 1 in 9" Twist 11.5" Government Contour Barrel Chrome Moly Matte with CAR-Style Handguard, Flash Hider. This Del-Ton Pistol Flat-Top AR-15 Upper Receiver comes complete and fully assembled, ready for installation onto any mil-spec lower receiver. The forged 7075 T6 Aluminum upper features an 11.5" Government Contour Barrel, Carbine-Length Gas System, F-Marked Front Sight Assembly, 2-Piece CAR-Style Handguards and an A2 Flash Hider.

The Patented Gear Head Works Tailhook MOD 1 is the most compact pistol brace in the world. At less than an inch thick, it can be adapted to practically every platform on the market. To activate the brace functionality, depress the release button and pull the arm down. This creates the shelf that will counterbalance the muzzle weight of your large frame handgun. The ability of your forearm to hold the weight allows you to relax your shooting wrist and concentrate on trigger control. True one-handed operation is achieved since you do not need a second hand to attach the brace to your arm.

The AR-STONER AR-15 Optics Ready Pistol Upper Receiver Assembly is a quality upper receiver at an exceptional price. The A3 upper attaches to any standard AR-15 lower receiver and comes complete with charging handle, forward assist, ejection port cover, bolt and bolt carrier assembly. This carbine length upper features a 1:7 twist 10.5-inch medium profile barrel with durable melonite finish. The low profile gas block makes this upper a fantastic platform for a red dot sight or scope.

The MidwayUSA Competition Range Bag was built from the ground up to be the best range bag on the market. Perfect for competition or a day at the range, this bag is big enough to hold everything you need in a neat and organized fashion. Super tough PVC coated material, reinforced stitching, heavy duty zippers, and closed cell foam padding in all pockets provide a long lasting range bag that ensures excellent protection for your gear. Whether you are a serious competitor or a weekend shooter, this range bag will quickly become a constant companion anytime you head out to shoot.

The Trijicon Miniature Rifle Optic (MRO) is a reflex-style, sealed sight intended for use on rifles, carbines, and shotguns to provide fast target acquisition. It is designed to be used with both eyes open, providing the operator with maximum situational awareness. The large aperture and tapered light path maximizes the viewing area in such a small optic, allowing for fast target engagement – especially from non-standard shooting positions. Advanced lens coatings and electronics produce a crisp red dot.

Swenson Glock 19 Gen 3 slides are precision machined from 416 stainless steel for a drop-in fit. Slides are shipped in a stripped configuration with no internal components, ready for standard factory replacement parts or a variety of aftermarket performance parts (including sights). These slides also feature a melonite finish, forward cocking serrations, and a snag-free bullnose profile. Part may require fitting to your specific gun. Features: - Forward cocking serrations - Melonite finish - Precision machined MPN#: 237417 SSAJ-021-00-00

The Crimson Trace 5-Series is a feature rich 3-24x 56mm long-range rifle scope that has been purposefully built from the ground up. The scopes First Focal Plane (FFP) and impressive ED glass makes for an unparalleled shooting experience. The custom designed LR1-MIL advanced reticle is fully illuminated and offers quick hold-over points for windage and elevation. The exposed 1/10 MIL turrets provide a precise and rugged feel when dialing for the most accurate of shots.

The Crimson Trace 3-Series is a feature rich 1-8x 28mm short-range rifle scope that has been purposefully built from the ground up. The scopes First Focal Plane (FFP) and impressive ED glass clarity makes for an unparalleled shooting experience. The custom designed SR2-MOA BDC advanced reticle offers a quick acquisition points that vanish when increasing magnification. The capped 1/4 MOA turrets provide a precise and rugged feel when dialing for the most accurate of shots.

The Kimber K6s revolver brings an unmatched level of performance and shootability to concealed carry. With the smallest cylinder capable of holding 6 rounds of .357 Magnum (also compatible with .38 Special), K6s compact revolvers are ideal for back-up, concealed carry and home defense. The Kimber K6s’ small frame and 1.39 inch diameter cylinder are machined from the finest stainless steel for superior integrity, strength, and resistance to the elements.

Del-Ton AR-15 A3 Flat-Top Upper Assembly 5.56x45mm NATO 1 in 9" Twist 16" Mid Length Lightweight Contour Barrel Chrome Moly Matte with CAR-Style Handguard, Flash Hider. This Del-Ton Lightweight Mid-Length A3 AR-15 Upper Receiver comes complete and fully assembled, ready for installation onto any mil-spec lower receiver. The forged 7075 T6 Aluminum upper features a 16" Lightweight Contour Barrel, F-Marked Front Sight Assembly, 2-Piece Polymer Handguards with heat shield and an A2 Flash Hider.

Del-Ton AR-15 A3 Flat-Top Upper Assembly 5.56x45mm NATO 1 in 7" Twist 16" M4 Contour Barrel Chrome Lined Chrome Moly Matte with CAR-Style Handguard, Flash Hider. This Del-Ton M4 Carbine Flat-Top AR-15 Upper Receiver comes complete and fully assembled, ready for installation onto any mil-spec lower receiver. The forged 7075 T6 Aluminum upper features a 16" Chrome Lined M4 Contour Barrel, Carbine-Length Gas System, F-Marked Front Sight Assembly, 2-Piece CAR-Style Handguards and an A2 Flash Hider.

The SB Tactical SBA4 Pistol Stabilizing Brace is a veteran designed pistol stabilizing brace designed for all platforms capable of accepting a mil-spec carbine extension. The SBA4 has an adjustable brace, which greatly enhances the usability of the firearm by adding a third point of contact. The SBA4 is a complete kit, ready-to-assemble on your Remington TAC-13, greatly enhancing the usability of the firearm by adding a third point of contact for stabilization.