Right To Bear Coupon Codes, Discounts and Deals

Listing 244 deals total

Filter Right To Bear Coupon Codes, Discounts and Deals

18 hours ago , by Dealer
$115.00
80 Percent Arms Universal 80% AR-15 Easy Jig FREE SHIPPING The universal fit Easy Jig™ is a patent pending device that makes machining your 80% lower easier, faster, and safer. Lowers finished with the Easy Jig™ have a better finish and hold tolerances that could not be achieved using any other jig on the market today. You do not need to own a drill press or mill to use the Easy Jig™. It truly makes finishing your lower a monkey simple process. On top of all this, it’s extremely durable and can be reused for dozens of lowers.
12
Right To Bear Compare prices for this product 20951
19 hours ago
$99.99
This 5.56 chambered 16" Pencil Profile Barrel is machined from 4150 Chrome Moly Vanadium steel with a QPQ Corrosion Resistant Finish and QPQ coated M4 feed ramp extension.
0
Right To Bear Compare prices for this product 381
19 hours ago
$99.99
This 5.56 chambered 16" Gov Profile Barrel is machined from 4150 Chrome Moly Vanadium steel with a QPQ Corrosion Resistant Finish and QPQ coated M4 feed ramp extension.
1
Right To Bear Compare prices for this product 1060
19 hours ago
$79.95
This National Match two-stage trigger from RRA is an excellent trigger for your AR15 rifle. These are used frequently in Varmint and Long Range AR builds where a lighter 2 Stage trigger really helps accuracy and round placement. These triggers come pre-adjusted by Rock River gunsmiths as a matched pair and drop in all mil-spec lowers with no adjustment necessary for an easy drop-in install. Rock River 2-stage NM pins are .1555 in diameter and are not recommended or designed to be used with .154 pins or .170 Colt lower receivers.
4
Right To Bear Compare prices for this product 1835
21 hours ago
This Lower Parts Kit comes with only the upgrades parts that you want! You don't have to waste money on standard LPK components if you're just going to put them aside and replace them with upgraded lower parts. With our Custom LPK you can choose a Mil-Spec trigger or you can add a Geissele trigger or many other trigger upgrades at a discounted rate.
1
Right To Bear Compare prices for this product 4606
1 day ago
$289.99
RTB G17 Raptor Slide With RMR Cut + G17 9mm BarrelSave big on this G17 slide with RMR Cuttout and Melonite 9mm barrel combo. Both the full sized stripped slide and 9mm barrel come with a melonite finish for increased wear resistance and ease of maintenance.
1
Right To Bear Compare prices for this product 6878
1 day ago
$54.95
This GLOCK 17 LPK comes with all of the OEM lower parts that you need to complete your Polymer 80% pistol frame, G17 frame, or G22 frame. This lower parts kit is comprised of tried and true genuine GLOCK components. G17 / G22 lower parts consist of: Trigger w/ Bar Trigger Housing Trigger Spring 5.5lb Trigger Connector Trigger Pin Trigger Housing Pin Locking Block Pin Slide Lock & Spring Magazine Catch & Spring Factory Slide Stop Lever SKU#: G17-LPK-OEM
0
Right To Bear Compare prices for this product 183
1 day ago
$69.95
Toolcraft Black Nitride Bolt Carrier Group - MPI Bolt - M16 Carrier This Toolcraft Black Nitride BCG comes with a lifetime warranty and is perfect for any AR15, M4 or M16 Build. Toolcraft carriers and bolts are build to military specifications, also known as "Mil-Spec" and they are known throughout the industry as some of the best. Toolcraft Bolt Carrier Groups come with a lifetime warranty! Enhanced 9310 Steel (Bolt) 8620 Tool Steel (Carrier) Mil-Spec Extractor Spring, black extractor insert, Viton O-Ring Tool Steel Extractor Shrouded Firing Pin
11
Right To Bear Compare prices for this product 10482
1 day ago
$169.99
RTB has teamed up with Ballistic Advantage to bring their legendary "Hanson Profile" to our line of AR barrels! The Hanson profile implements a more efficient method of weight distribution, which has all of the benefits of a lightweight barrel without any of the limitations. We are proud to offer our selection of BA Hanson profile CO-BRANDED barrels!
0
Right To Bear Compare prices for this product 47
1 day ago
$89.95
The low mass light Bolt and Bolt Carrier Assembly comes complete with cam pin, firing pin and firing pin retainer. Carrier is made from 8620 steel and is Nitrided Bolt is made from 9310 steel and is maganese phophate MPI Tested. Compatible with all AR-15 platform systems. The Anderson Lightweight Bolt Barrier group Total weight is 9.3888 ounces. .223 / 5.56 bolt assembly is compatible with .300BLK as well! Fully mil-spec construction Chrome lined gas key Durable phosphate finish (Carrier) 9310 steel bolt is MPI tested (Nitride)
1
Right To Bear Compare prices for this product 435
2 days ago
$79.95
Rock River Arms Two-Stage Varmint Match Trigger (3.5 Pound Varmint Version) This National Match two-stage trigger from RRA is an excellent trigger for your AR15 rifle. These are used frequently in Varmint and Long Range AR builds where a lighter 2 Stage trigger really helps accuracy and round placement. These triggers come pre-adjusted by Rock River gunsmiths as a matched pair and drop in all mil-spec lowers with no adjustment necessary for an easy drop-in install.
9
Right To Bear Compare prices for this product 4747
2 days ago
$129.99
Uses Gen 3 Glock 17 slide and parts. Frame uses G17 parts but takes a Glock 19 magazine. The industry’s only 80% Compact Longslide Polymer Pistol Frame offers our enhanced ergonomics and features with a twist. The hybrid design combines the advantages of the longer PF940v2™ slide and barrel with the concealability of the PF940C™ grip. Built with high-strength reinforced polymer construction, the PF940CL™ comes with everything necessary to complete a Gen 3 Glock® 17/22-compatible pistol frame. COMES WITH EVERYTHING YOU NEED. JIG AND TOOLS INCLUDED. TEXTURED GRIP MODEL
0
Right To Bear Compare prices for this product 114
2 days ago
$155.00
For an additional $10 you can have all 4 lowers safety engraved! Save big on this AR15 80% Lower 4 pack with 1 CMMG Gun Builders Parts Kit (4) AR15 Cerro 80% Lower Recevers (1) CMMG Gun Builders Lower Parts Kit - No Trig/Grip 80% machined (just needs trigger and safety well machined) 7075 aluminum T6 heat treated Magwells are flared and broached Cerro Forge (KeyHole) SKU#: 80RAW4-55CA601
0
Right To Bear Compare prices for this product 127
2 days ago
$179.99
223 Wylde is a hybrid of the 223 REM and 5.56. 223 Wylde has a chamber throat that is tighter than the 5.56 achieving better accuracy but still reliably functional with 5.56 ammunition. INCLUDES FREE TUANBLE LOW PROFILE GAS BLOCK .750 Gas Block Journal Profile: Medium Length: 10.5" Gas placement: Carbine Rifling: Button 1/8 twist Weight: 1.23 lbs Made from 416 Stainless Steel M4 Feed ramps 1/2-28 Threading 1" MOA guaranteed SKU#: B-223-10-UL-C
0
Right To Bear Compare prices for this product 304
3 days ago
$45.00
This full mass carrier is exactly what you need to finish your AR15, M16 or M4 Bolt Carrier Group. Pairs perfectly with any of our bolt completion kits. Bolt, cam pin, firing pin and firing pin retaining pin not included. 8620 Tool Steel (Carrier) Chrome Lined Carrier (AUTO) Chrome lined gas key Mil-Spec Gas Key (4130 Steel) attached with Grade 8 hardware and Properly staked SKU#: PHCLC
1
Right To Bear Compare prices for this product 5649
3 days ago
$59.95
Featuring our new Right To Bear Lightweight carrier, weighing in at approximately 6.8 Ounces, or 194.1 Grams for you lightweight build fanatics! Using our low mass Carrier creates less reciprocating mass moving back and forth inside the action, which reduces recoil significantly. Our lightweight carrier also allows proper cycling with less gas. When used in conjunction with an adjustable gas block & reduced power buffer spring, you can tune the gas way down, which will reduce muzzle rise and carbon build up.
4
Right To Bear Compare prices for this product 6641
3 days ago
$129.99
These Armalite pattern AR-10 stripped upper / lower receiver sets come with some cosmetic blemishes that will not affect functionality Magpul .308 magazines WILL work with these lowers These 308 receiver sets may ship from Tactical Machining. We will forward tracking info as soon as they ship These sets MUST ship to an FFL. Please see our purchasing guidelines for more information. Features: Armalite Pattern AR10 Lower (Uses Armalite Lower Parts Kit)
11
Right To Bear Compare prices for this product 10029
3 days ago
$139.99
M4 Flat Top Upper Receiver (Nickel Teflon) Comes Complete W/ Forward Assist & Ejection Port Door Electroless Nickel Teflon has continually proven to outperform traditional Anodizing and Phosphate coatings by Leaps and Bounds! The increased reliability, corrosion resistance and ease of maintenance make this upgrade a no-brainer. Forged & Machined by Cerro Forge (Key Hole)
6
  • UPC not set
  • MPN: NTUS
Right To Bear Compare prices for this product 3451
4 days ago
$129.99
Save big on this Aero Stripped Upper + Toolcraft Nickel Boron 158 BCG Combo! Toolcraft Nickel Boron 158 MPI BCG: This Nickel Boron 158 BCG from Toolcraft features an MPI bolt and M16 carrier, and comes with a lifetime warranty. Built to military specifications, it stays true to the Toolcraft name of quality, durability and best-in-industry. The bolt is made from mil-spec carpenter 158 steel, shot peened and magnetic particle inspected, while its carrier is made from 8620 tool steel. All components are pre-polished before being plated by UCT and then polished again for a high shine.
0
Right To Bear Compare prices for this product 128
5 days ago
$149.99
Aircraft Grade Aluminum Side Plates The AR-15 Router Jig by 5D Tactical is the fastest, most technologically advanced, easiest to use jig on the market and provides the best finished results, PERIOD. All you will need from us to finish an AR-15 80% lower at home is the AR-15 Router Jig, our Hybrid End Mill, and some drilling tools. Our Hybrid End Mill and the necessary drilling tools are available as a prepackaged kit in our Jig Tool Kit.
0
Right To Bear Compare prices for this product 385
5 days ago
$97.95
This Toolcraft Nickel Boron 158 BCG comes with a lifetime warranty and is perfect for any AR15, M4 or M16 Build. Toolcraft carriers and bolts are build to military specifications, also known as "Mil-Spec" and they are known throughout the industry as some of the best. Toolcraft Bolt Carrier Groups come with a lifetime warranty! - Mil-spec carpenter No. 158® steel (bolt) - 8620 Tool Steel (Carrier) - Mil-Spec Extractor Spring, black extractor insert, Viton O-Ring - Tool Steel Extractor - Shrouded Firing Pin
3
Right To Bear Compare prices for this product 1572
5 days ago
$74.95
These Armalite pattern AR-10 stripped lower receivers come with some cosmetic blemishes that will not affect functionality. Lowers come raw "in the white" and are ready to be anodized or cerakoted Magpul .308 magazines WILL work with these lowers These lower receivers may ship from Tactical Machining. We will forward tracking info as soon as they ship This stripped lower MUST ship to an FFL. Please see our purchasing guidelines for more information. Features: Armalite Pattern AR10 Lower (Uses Armalite Lower Parts Kit)
0
Right To Bear Compare prices for this product 493
5 days ago
$109.99
SLR Rifleworks Synergy Mini Comp 5.56 – Titanium Grade 5 Titanuim 1/2x28 Threading No ports on bottom to reduce ground blast 1.4oz .252 bore 1.84 OAL .862 Dia Works with VG6 CAGE Device Adds 1.24" to Barrel Length . NOT for 14.5" Barrels ALL NFA Rules Apply SKU#: MB556-SYNERGY-MINICOMP-TI
3
Right To Bear Compare prices for this product 1134
5 days ago
$37.95
80% Raw Lower Receiver Forged by Cerro w/ Safety Engraving Option The 80% AR-15 Lower Receiver is NOT an FFL item. These units are forged by Cerro, which produces the forgings for companies such as Colt, Spikes Tactical Daniel Defense, DPMS and other major manufacturers. The ATF classifies these units as non-firearms. These units are “finished in the white”, tumbled and are ready to be bead blasted before either Anodizing or Cerakote finishing. Specs: 80% Machined (Just needs trigger and safety well machined) 7075 Aluminum T6 Heat Treated Magwells are flared and broached
28
  • UPC not set
  • MPN not set
Right To Bear 12235
6 days ago
$99.99
This 5.56 chambered 8 inch Pistol Barrel is machined from 4150 Chrome Moly Vanadium steel with a QPQ Corrosion Resistant Finish and QPQ coated M4 feed ramp extension. Length - 8" Material - 4150 Chrome Moly Vanadium Profile - DRP Finish - QPQ Corrosion Resistant Gas System Length - Pistol Gas Block Journal - .750″ Gas Block Journal Twist Rate - 1/7 Twist Muzzle - 1/2x28 Threaded Weight - 21oz SKU#: RTB5568M
0
Right To Bear Compare prices for this product 266
1 week ago
$15.95
This MICRO .308 flash can works great as a linear compensator, which directs your rifles blast, noise and escaping gases down range. These 308 linear comps are perfect for SBR / pistol 300 blackout builds, or any short barrel AR that shoots a projectile that is 7.62 or smaller. This slim line design follows the KX5 diameter and will fit under most handguards and rails that the original flaming pig would otherwise not fit under. 1.200" DIA 1.750" LONG 6061 ALUMINUM BLACK HARD ANODIZED FINISH 1.53 OZ. 3/4" WRENCH FLATS THREADED 5/8-24 FOR 30 CALIBER OR SIMILAR WEAPONS
0
Right To Bear Compare prices for this product 135
1 week ago
$19.99
This flash can works great as a linear compensator, which directs your rifles blast, noise and escaping gases down range. These 308 linear comps are perfect for SBR / pistol 300 blackout builds, or any short barrel AR that shoots a projectile that is 7.62 or smaller. This slim line design follows the KX5 diameter and will fit under most handguards and rails that the original flaming pig would otherwise not fit under. 1.200" DIA 3.250" LONG 6061 ALUMINUM BLACK HARD ANODIZED FINISH 3.5 OZ. 3/4" WRENCH FLATS THREADED 5/8-24 FOR 30 CALIBER OR SIMILAR WEAPONS
0
Right To Bear Compare prices for this product 383
1 week ago
$6.95
Mil-spec AR-15 triggers typically have an 8 to 9 pound trigger pull with factory springs. Utilizing the KVP Reduced Power Spring Kit should achieve a trigger pull reduction of 2 to 4 pounds. A 5 to 6 pound trigger pull is typical after installation of the KVP Reduced Power Spring Kit.
3
Right To Bear Compare prices for this product 2278
1 week ago
$119.99
This BCG is perfect for shooters looking for a tactical advantage resulting from the non-reflective properties.
0
Right To Bear Compare prices for this product 145
1 week ago
$149.95
Primary Arms Advanced Micro Dot with Push Buttons and 50K Battery Life, MD-ADS Micro Dot with removable base Ultra sharp 2 MOA dot New advanced technology LED allows up to 50,000 hours battery life Uses 1 CR2032 battery (included) 12 brightness settings Visible in bright sunlight Night vision compatible (the lowest two settings) Absence of parallax shift past 33 yards Black anodized finish Lowest profile emitter on the market Nitrogen purged Waterproof Only weighs 3.9 ounces
7
Right To Bear Compare prices for this product 3567
1 week ago
$119.95
Rock River Arms Complete Lower Parts kit W/ 2 Stage National Match Trigger
9
Right To Bear Compare prices for this product 2805
1 week ago
$34.95
Shockwave is proud to introduce the patent-pending Blade pistol stabilizer. Made from high-strength glass-reinforced polymer, the Blade is manufactured to exacting tolerances and fits all pistols equipped with a standard AR-15 pistol buffer tube (up to 1.25″ in diameter). No special receiver extension needed. No half-hour installation process. Just slip it on and tighten the large set screw for a rock-solid installation. Fits all pistols equipped with a standard AR-15 pistol buffer tube (up to 1.25″ in diameter)—AR pattern, Glock, CZ Scorpion Evo 3, HK9X pattern, etc.
3
Right To Bear Compare prices for this product 1250
1 week ago
$219.99
This GLOCK 9mm G17 Gen 3 Upper Slide comes with an RMR cut machined into the slide. This RMR ready Glock 17 slide is exactly what you need to complete your factory Glock 17 lower or Poymer 80% full sized frame. Our raptor cut slides are precision machined from 17-4 billet stainless and are finished with melonite for increased wear resistance and lubricity.
0
Right To Bear Compare prices for this product 1926
1 week ago
$285.00
RTB G17 Raptor Slide + G17 9mm BarrelSave big on this G17 slide and Melonite 9mm barrel combo. Both the full sized stripped slide and 9mm barrel come with a melonite finish for increased wear resistance and ease of maintenance.
0
Right To Bear Compare prices for this product 501
1 week ago
$99.99
CMMG 4.5” .22 AR Barrel - 22LR Length: 4.5" 1:16" Twist Chamber: 22 Long Rifle Profile: Medium Taper Muzzle Thread: 1/2"-28 TPI Gas Port Location: none SKU#: 22D5B0F
3
Right To Bear Compare prices for this product 1267
1 week ago
$219.95
Add an RMR cut slide for 189.95 Add LPK for $49.95 This GLOCK 9mm G19 Gen 3 Upper Slide comes with an RMR cut machined into the slide. This RMR ready Glock 19 slide is exactly what you need to complete your factory Glock 19 lower or Poymer 80% compact frame. Our raptor cut slides are precision machined from 17-4 billet stainless and are finished with melonite for increased wear resistance and lubricity Product Code: RTB-G19-M1-RMR-GEN3
1
Right To Bear Compare prices for this product 1620
1 week ago
$18.95
Mil-spec ejection port door constructed from stamped steel American Flag Engraved Inside & Out Ejection port door spring Ejection port door pin Ejection port door C-clip (Installed) Forward assist Forward assist spring Forward assist retention pin SKU#: EJPD-USAF-URCK
0
Right To Bear Compare prices for this product 91
1 week ago
$199.99
This 9mm G17 Gen 3 Upper Slide is exactly what you need to complete your factory Glock 17 lower or Poymer 80% full sized frame. Our raptor cut slides are precision machined from 17-4 billet stainless and are finished with melonite for increased wear resistance and lubricity.
0
Right To Bear Compare prices for this product 11242
1 week ago
$169.99
10" Exact top rail length SLR's Q-Mod - All Keymod slots double as QD swivel mounting points 1.3" ID Weight 8.2 oz Gen 4 Mil-Spec Hardcoat Anodize 7075 Barrel nut w/ Hardcoat Anodize Melonite Finish Hardware Free Floating Design Slip fit locking mount design Billet Anti Rotation Insert Anti Slip Design Barrel nut uses standard wrenches or SLR Billet wrench Continuous top rail design Mil-Spec 1913 Mounting rails SKU#: 10KM-U
0
Right To Bear Compare prices for this product 128
1 week ago
$109.99
RTB G17 9mm Barrel, Gen 3This match grade G17 barrel drops right into your Glock 17. The 9mm barrel comes with a black nitirde finish and drops right into your Gen 3 Glock. This melonite barrel matches up perfectly with our G17 slides and is exactly what you need to complete your P80 frame build. The melonite finish on this 416 barrel provides wear resistance, along with ease of maintenance. G17 9mm Barrel Features:Caliber: 9mm LugerBarrel Material: 416RCompatibility: Gen 3, G17 Barrel Twist: 1:10This slide is meant to be used with our G17 Gen 3 Slides.
0
Right To Bear Compare prices for this product 105
1 week ago
$89.95
Glock 17/22/31 OEM Factory Pistol Frame - Gen 3 BlackThis OEM factory new full size Glock frame is ready to be built into a G17, 22, or 33. Choose from our list of aftermarket accessories and build your own custom Glock Gen 3 from the ground up!LOCKING BLOCK NOW INCLUDED WITH FRAMEThis item MUST ship to an FFL. Please see our purchasing guidelines for more information.Click here for our NO-FFL Do It Yourself 80% frames SKU#: G17-GEN3-OEMF
0
Right To Bear Compare prices for this product 3584
2 weeks ago
$89.95
Glock 19/23/32 OEM Factory Pistol Frame - Gen 3 BlackThis OEM factory new compact Glock frame is ready to be built into a G19, 23, or 32. Choose from our list of aftermarket accessories and build your own custom Glock Gen 3 from the ground up!LOCKING BLOCK NOW INCLUDED WITH FRAMEThis item MUST ship to an FFL. Please see our purchasing guidelines for more information.Click here for our NO-FFL Do It Yourself 80% framesSEE OUR NEW G19 GEN 3 STRIPPED SLIDE w/ RMR Cut! SKU#: G19-GEN3-OEMF
3
Right To Bear Compare prices for this product 10398
2 weeks ago
$74.95
The 16″ .223 Wylde Lightweight barrel is the perfect barrel to start your next build and add to your AM-15 collection. This barrel is made from 4150 Chrome Moly Vanadium Steel with a Parkerized finish. Featuring a mid-length gas system with a .750″ gas port and a 1:8 twist, this barrel provides top accuracy and precision for your .223 build. BARREL LENGTH: 16″ CALIBER: .223 Wylde TWIST RATE: 1:8 PROFILE/CONTOUR: Light Weight MATERIAL: 4150 Chrome Moly Vanadium FINISH: Parkerized GAS SYS: Mid-Length DIAMETER AT GAS PORT: .750″ MUZZLE THREAD: 1/2-28 TREATMENT: Non RF85
1
Right To Bear Compare prices for this product 268
2 weeks ago
$9.99
Strike Industries AR15 Extended Bolt Catch The SI-XBC Extended bolt catch is a heavy duty, “go-fast” addition to the SI line of enhanced parts. Under high stress situations, the oversized bolt release lever aides in rapid thumb or palm engagement, even with gloved hands. The lever is reinforced for increased durability and impact resistance. Product Code: SI-AR-XBC
6
Right To Bear Compare prices for this product 5563
2 weeks ago
$79.95
These Armalite pattern AR-10 stripped lower receivers come with some cosmetic blemishes that will not affect functionality Magpul .308 magazines WILL work with these lowers These lower receivers may ship from Tactical Machining. We will forward tracking info as soon as they ship This stripped lower MUST ship to an FFL. Please see our purchasing guidelines for more information. Features: Armalite Pattern AR10 Lower (Uses Armalite Lower Parts Kit)
0
Right To Bear Compare prices for this product 2251
2 weeks ago
$139.99
Save Big on this 80 Percent Arms Easy Jig and Cerro Forged 80% Lower Combo! This combo comes with the two items listed below. See individual pages for full product descriptions. Please see MAGWELL & SAFETY tabs below for optional engraving chart. You can select your engraving from the drop down menu located above the add to cart button. SKU#: 80J-EASY-CERRO-COMBO
0
Right To Bear Compare prices for this product 3695
3 weeks ago
$99.99
DPMS Gen 1 pattern Raw aluminum finish Compatible with both DPMS and SR-25 Magazines. 5 axis CNC machined from billet to extremely tight tolerances Integral trigger guard Semi / Safe selector marking engraved on both sides Ultra-tough reinforced billet design Broached Magwell Operations left to complete are as follows: fire control group, trigger pin, hammer pin, trigger slot and safety selector. Discounts are available for 5 packs and 10 packs. Once you add a quantity of 5 or more lowers to your cart, the price will automatically adjust to the discounted price.
0
Right To Bear Compare prices for this product 401
4 weeks ago , by Dealer
$179.99
Now you can get a proven Spike's Tactical M16 BCG Coated in Nickel Boron! This is currently the finest BCG on the Market! They Come Complete with Bolt Carrier, Complete Bolt, Cam pin, Firing Pin and Firing pin retaining pin.All bolts are HPT/MPI testing to ensure the highest quality available on the market.
0
Right To Bear Compare prices for this product 1228
1 month ago
$59.95
Stock Features: Slide-on replacement for original collapsible butt stock Angled non-slip rubberized buttpad allows faster presentation, even with body armor Quick Detach Sling mounting point is positioned for optimum usage including ambidextrous shooters Upper section provides enhanced cheek weld Patent Pending Made in the USA Mil-Spec Buffer Tube Kit Features: Mil-spec 6-pos buffer tube w/ mil-spec anodizing, type III hardcoat, Class II Carbine buffer (2.9oz) Carbine buffer spring Carbine stock end plate Carbine stock lock ring-castle nut Buffer tube machined from 7075 T6
0
Right To Bear Compare prices for this product 309
1 month ago
$7.99
These AR15 anti walk / anti rotation hammer and trigger pins are what you need to keep your receiver from excessive wear and tear. Keeping the hammer and trigger pins from rotating is especially important when shooting full auto or with pistol caliber builds, such as 9mm AR15's. Standard .154" Pin Size (not for large pin Colts or M&P 22s Comes with (2) Pins, (4) Screws, (2) wrenches & (1) guide cone Works on standard AR15 and AR10 lowers SKU#: ANTI-WALK-SS
0
Right To Bear Compare prices for this product 556
1 month ago
$29.99
Shockwave is proud to introduce the patent-pending Blade pistol stabilizer. Made from high-strength glass-reinforced polymer, the Blade is manufactured to exacting tolerances and fits all pistols equipped with a standard AR-15 pistol buffer tube (up to 1.25″ in diameter). No special receiver extension needed. No half-hour installation process. Just slip it on and tighten the large set screw for a rock-solid installation. EVERY SET COMES WITH ATF APPROVAL LETTER
1
Right To Bear Compare prices for this product 252
1 month ago
$289.99
Save big on this G19 Compact slide with RMR Cuttout and Melonite 9mm barrel combo. Both the compact stripped slide and 9mm barrel come with a melonite finish for increased wear resistance and ease of maintenance. These parts are guaranteed to work together as they are machined to match grade +/- 0.0002” tolerances. Slide Features: Gen 3 compatibility (Works with all Polymer 80 compact frames) Black nitride finish Accepts standard Glock sights (not included) Accepts all standard and most aftermarket G19 components Machined to accept Trijicon RMR 9mm Barrel Features:
0
Right To Bear Compare prices for this product 557
1 month ago
$89.99
This 9mm chambered 8.3 inch Modern Series Barrel is machined from 4150 Chrome Moly Vanadium steel with a QPQ Corrosion Resistant Finish and 1/2-28 x .400 full profile threads. You may use this barrel with a lower receiver that is a Registered SBR, Machine Gun, or Pistol. Possession of this barrel along with a Non-NFA lower receiver is Prohibited, except when installed on a Pistol configuration firearm. - Designed to work with both Colt/RR and Glock style AR builds - Compatible with standard mil-spec uppers and dedicated uppers
0
Right To Bear Compare prices for this product 183
1 month ago
$189.99
This .308 chambered (DPMS style) 16 inch barrel is machined from 416R Stainless Steel with a bead blasted finish. Our Premium Series Barrels are HP and MPI tested, ensuring the best in quality and accuracy. Features: Length - 16" Material - 416R Stainless Steel Profile - Tactical Government Finish - Bead Blasted Gas System Length - Mid-Length Gas Block Journal - .750 Twist Rate - 1:10 inches Muzzle - 5/8x24 Threaded Weight - 35.9oz Other Info - HP and MPI Tested SKU#: BABL308003P
0
Right To Bear Compare prices for this product 65
1 month ago
$119.99
This match grade G19 barrel drops right into your Glock 19. The 9mm barrel comes with spiral flutes and drops right into your Gen 3 compact Glock. This Nitride barrel matches up perfectly with our G19 slides and is exactly what you need to complete your P80 compact frame build. The melonite finish on this 416 barrel provides wear resistance, along with ease of maintenance. G19 Spiral Fluted Barrel Features: - Caliber: 9mm Luger - Barrel Material: 416R - Compatibility: Gen 3 compact frame only - Barrel Twist: 1:10
2
Right To Bear Compare prices for this product 4415
1 month ago
$79.95
Glock 19 9mm OEM Slide Upper Completion Kit - Gen 3This G19 9mm Upper Slide Completion Kit comes with everything that you need to finish your GLOCK 9mm Gen 3 slide, other than the barrel. All of the components in this kit are true OEM GLOCK slide parts, including the upgraded Loaded Chamber IndicatorIn our experience, many aftermarket GLOCK components are out of spec and cause a number of issues. Going with a true OEM upper parts kit insures proper fit and function.
0
Right To Bear Compare prices for this product 240
1 month ago
$109.99
RTB G19 Compact Crowned 9mm Barrel, Gen 3This match grade G19 barrel drops right into your Glock 19. The 9mm barrel comes with a black nitirde finish and drops right into your Gen 3 compact Glock. This melonite barrel matches up perfectly with our G19 slides and is exactly what you need to complete your P80 compact frame build. The melonite finish on this 416 barrel provides wear resistance, along with ease of maintenance.
0
Right To Bear Compare prices for this product 113
1 month ago
$79.95
Glock 17 9mm OEM Slide Upper Completion Kit - Gen 3This G17 9mm Upper Slide Completion Kit comes with everything that you need to finish your GLOCK 9mm Gen 3 slide, other than the barrel. All of the components in this kit are true OEM GLOCK slide parts, including the upgraded Loaded Chamber IndicatorIn our experience, many aftermarket GLOCK components are out of spec and cause a number of issues. Going with a true OEM upper parts kit insures proper fit and function.
0
Right To Bear Compare prices for this product 124
1 month ago
$8.95
Magpul Original Equipment (MOE) is a line of firearm accessories designed to provide a high-quality, economical alternative to standard weapon parts. The MOE line distinguishes itself with a simplified feature set, but maintains Magpul engineering and material quality.
2
Right To Bear Compare prices for this product 1806
1 month ago
$129.99
Polymer 80 PF940CV1 Compact Pistol Frame Kit For Glock 19/23/32 - OD Green There is NO version 2 of this compact pistol frames. This is the latest and greatest. The full size frames are now offered in V2. The compact frame has no need for an update.
0
Right To Bear Compare prices for this product 6074