Gun Parts
(8,440 deals total)

Filter Gun Parts

Sponsored
Details 16" Barrel length M4 Profile Barrel Chrome Moly Vanadium Barrel; Phosphate 5.56 Nato Chamber 1 in 8" twist rate F-Marked Front sight post A2 Flash Hider Sling Loop Standard Hand Guards w/ heat shields Forged upper receiver Bolt Carrier Group Carpenter 158 Bolt Charging Handle  Features Barrel: Phosphate coated 4150V Chrome Moly steel. Chambered in 5.56 NATO, with a 1:8 twist, M4 barrel extension, and a carbine-length gas system. Barrel is is finished off with a standard handguard, F-Marked gas sight base, and A2 flash hider.
1
Sponsored
Anderson Manufacturing builds rifles, pistols, and parts utilizing the latest in computerized manufacturing. By keeping manufacturing in house, Anderson can offer quality, American-made products at an affordable price, backed by a limited lifetime warranty. The Anderson Manufacturing AR-15 Stripped Upper Receiver is built to MIL-SPEC. Crafted from a 7075-T6 aluminum forging and machined with M4 feed ramps. This stripped model does not include a forward assist or ejection port cover. NOTE: Forward assist and ejection port cover sold separately. Features:
4
Sponsored
The M4E1 Threaded Upper Receiver features a new angular machined design that helps it stand apart from standard mil-spec upper receivers. This upper receiver features the same enhanced body profile as our M4E1 Enhanced Upper Receiver but is threaded to accept a standard AR15 barrel nut. It is forged from 7075-T6 Aluminum and precision machined to work with all mil-spec AR15 parts. The M4E1 Threaded Upper Receiver is designed to pair perfectly with our new M4E1 Lower Receiver, giving you a billet looking receiver set at a fraction of the billet price. Features:
0
Sponsored
This M16 Bolt Carrier Group drops right into your M16, AR15 or M4 platform rifle. We source our components from manufacturers that meet or exceed Military Specifications. All parts are machined and properly heat treated to Mil-Spec followed by complete Nickel Boron coating with UCT’s Exclusive EXO Technology.
2
53 minutes ago
Details Barrel Length: 7.5" Barrel Profile: Heavy Gas System: Pistol-Length Barrel Steel: 4150V Chrome Moly Vanadium  Barrel Finish: Phosphate Chrome Lining: None Muzzle Thread: 1/2-28 Chamber: 5.56 NATO Twist Rate: 1/7 Barrel Extension: M4 Diameter at Gas Block: .750" Gas Block Type: Low-Profile Muzzle Device: A2 Flash Hider Receiver Material: Forged 7075 T6 Aluminum  Receiver Type: M4 Handguard Type: PSA 7" Lightweight M-Lok Free Float Bolt Carrier Group Included: Yes Bolt Steel: Carpenter 158 Charging Handle Included: Yes
0
54 minutes ago
Description Don’t let a missing detent or spring put your build on hold! We recommend always having one or two of these on-hand. LIMIT: 1 Per Order – Orders with more than 1 each may be canceled or refunded accordingly. OOPS! Kit Includes:
1
  • UPC:
  • MPN:
1 hour ago
The M5 (.308) Pistol Complete Lower Receiver is the perfect base for your custom M5 pistol build. This complete lower features a Magpul™ MOE Grip and our Lower Receiver. Save when you buy it complete and let our specialists do the installation for you! Includes: - M5 (.308) Stripped Lower Receiver - FDE Cerakote - Magpul™ MOE Grip - Black - Standard Lower Parts Kit - Enhanced Pistol Receiver Extension - .308 Carbine Buffer and Spring - These parts are installed
0
1 hour ago
This micro flash can works great as a linear small compensator, which directs your rifles blast, noise and escaping gases down range. These 5.56 linear comps are perfect for SBR / pistol 223 builds. They also work great on .22LR AR's, or any other rimfire caliber that shoots a projectile measuring 5.56 or smaller. This slim line design follows the KX5 diameter but is much shorter and will fit under most handguards and rails that the original flaming pig would otherwise not fit under. 1.200" DIA 1.750" LONG 6061 ALUMINUM BLACK HARD ANODIZED FINISH 1.53 OZ. 3/4" WRENCH FLATS
21
1 hour ago
The M5 .308 Stripped Upper Receiver is the perfect upper for your big bore rifle build. Forged from 7075- T6 aluminum, this stripped upper is precision machined to accept standard .308 components. Match this with our M5 .308 lower receiver for a solid and dependable fit. Features: - M4 Feedramps - .2795 takedown pin holes - Lazer engraved T-marks - DPMS High Profile (.210) Tang Includes: - M5 .308 Stripped Upper Receiver in FDE Cerakote (info on Cerakote Firearm Coating) This product is blemished. Blemishes may include: - Plating inconsistencies - Pits
0
1 hour ago
PSA 7.5" Phosphate 300AAC Blackout 1/8 6" Lightweight M-Lok Upper - With BCG and CH - 5165447573 SKU: 5165447573 UPC: 5165447573 MFR#: 5165447573 Barrel Length: 7.5" Gas System: Pistol Length Barrel Profile: Heavy Barrel Steel: 4150V Barrel Finish: Phosphate Chrome Lining: None Muzzle Thread: 5/8-24 Chamber: 300AAC Blackout Twist Rate: 1:8 Barrel Extension: M4 Diameter at Gas Block: .750 Gas Block Type: Low-Profile Muzzle Device: A2 Style Flash Hider Receiver Material: Forged 7075 T6 Receiver Type: M4 Handguard Type: PSA 6" Lightweight M-Lok Free Float Rail
0
1 hour ago
Barrel Length: 16" Gas System: Midlength Barrel Profile: A2 Barrel Steel: 4150 Chrome-Moly Vanadium Barrel Finish: Nitride Chrome Lining: None Muzzle Thread: 1/2-28 Chamber: 5.56 NATO Twist Rate: 1:7 Barrel Extension: M4 Diameter at Gas Block: .750 Gas Block Type: Low-profile Muzzle Device: A2 Flash Hider Receiver Material: Forged 7075 T6 Receiver Type: M4 Handguard Type: PSA 13.5" Lightweight M-Lok Rail Bolt Carrier Group Included: Yes Bolt Steel: Carpenter 158 Bolt Carrier Profile: Full-auto Charging Handle Included: Yes
0
1 hour ago
207-000-017WB Standard Curved Trigger, 3.5 lb Pull Mfr Part: 91501 207-000-018WB Standard Flat Trigger, 3.5 lb Pull Mfr Part: 91503 Style: Drop-In View Dream Gun Drop-In Trigger Module Is Factory Tuned For A Super Smooth, Clean-Breaking Pull
0
1 hour ago
207-000-135WB AR-15 Tactical Black Trigger Single Stage 3.5lbs Flat Style: Drop-In, Single-Stage Description Specs Enhanced Accuracy & Reliability Thanks to a partnership between Brownells and CMC Triggers, now you can get this specially developed trigger as a Brownells exclusive! Called the AR-15 Tactical Trigger, this drop-in, single-stage trigger design has many of the features you're familiar with, but it has a look that you can only get from Brownells.
0
1 hour ago
The Rise Armament Blitz Elite Performance Trigger is the first of its kind as a truly premium trigger at mid-range prices. Fixed at a crisp 3.5-pound pull with fast trigger reset and minimal over-travel, this competition ready trigger allows you to shoot more accurately and much faster with much less effort. The Blitz features their new Quik-Klik reset that provides an audible and tactile reset. The hybrid trigger bow, disconnector, and lightened hammer have all been precision CNC machined from high-grade heat-treated tool steel and Melonite coated for increased corrosion resistance.
0
3 hours ago , by Dealer
Use coupon code "FREELPK" for free shipping.
0
  • UPC:
  • MPN:
4 hours ago
Description Disclosure: Handguards will be either keymod or mlok depending on availability. If you have a preference, please leave in the comment at checkout and we will try to accommodate the request.  This build kit will come with everything EXCEPT the stripped lower receiver to build a 16″ AR-15 PARTS specifics will vary as demand is expected to be EXTREMELY high Every kit will come with the following. Either mil spec upper receiver or upgraded billet upper receiver (depending on availability) Forward assist and dust cover (where applicable) Full auto nitride mpi bcg
0
12 hours ago
The L-E stock was designed to conform with design parameters for the standard LE style stock found on most Law Enforcement and stock builds. This stock will fit with a Mil-Spec buffer tube and features a quick adjust grip lever and a multiple sling mounts. For your safety, Trinity Force recommends this part be installed by a competent, qualified gunsmith/installer with an understanding of the weapon platform that the part is being installed on. Always make sure the firearm is unloaded and pointed in a safe direction when working. Length (in)7.7 Receiver Extension TypeMil-Spec
0
13 hours ago
100-041-101WB AR15 14.7" A2 Carbine Barrel 1-7 Twist M4 Extension 5.56mm Cartridge: 5.56 mm NATO Length: 14.7" Finish: Black Gas System Length: Carbine Muzzle Threads: 1/2-28 Twist: 1-7 Description Specs Introducing Brownell’s M4 Carbine stripped carbine length barrel, perfect for your M4 or M4A1 replica build. Chambered in 5.56x45, the chrome lined barrel has a 1-7 twist, and is finished in black phosphate with an overall length of 14.7”. The barrel features an M4 barrel extension and has ½-28 threads. No other hardware is included.
0
  • UPC:
  • MPN:
14 hours ago
Aero Precision M4E1 Complete Lower Receiver w/ MOE SL Grip & SL-K StockThe M4E1 Complete Lower Receiver is the perfect base for your custom AR15 build. This complete lower features our custom designed M4E1 Lower Receiver and is upgraded to include a MOE SL® Grip and MOE® SL-K™ Carbine Stock.Includes:M4E1 Lower ReceiverMagpul SL GripMagpul SL-K Carbine StockLower Parts KitCarbine Receiver ExtensionAR15 Carbine Buffer and SpringThis item MUST ship to an FFL. Please see our purchasing guidelines for more information. MPN#: APAR600117
0
14 hours ago
Aero Precision M5 Complete Lower Receiver w/ MOE Grip - No StockThe M5 Complete Lower Receiver is the perfect base for your custom big-bore AR build. This complete lower features our custom designed M5 Lower Receiver and is upgraded to include a MOE Grip. Save when you buy it complete and let our specialists do the installation for you! Our M5 Lower Receiver sets the standard for big-bore AR builds. This custom designed enhanced forging is machined from 7075-T6 Aluminum and works with standard AR308 components and magazines.
0
14 hours ago
This complete lower parts kit from Tactical Superiority is retail packaged and includes everything you need to complete your lower receiver. Pistol grip, grip screws & lock washer Trigger Hammer Hammer & trigger springs Hammer, trigger & takedown pins Disconnector & disconnector spring Selector & selector spring Detent spring & selector Take down detent Bolt catch, buffer, spring & roll pin Magazine catch, spring & button Front pivot pin Buffer retainer pin & spring MPN#: LPK5-003CCB
0
14 hours ago
Description Specs Want to take your AR build game to another level? Hybrid 80 is proud to offer the first 80% Lower Receiver Blank on the market, The Liberator . Using the same Nylon 6-6 with 50% fiber fill for the body and brass inserts near high stress or threaded areas , the Hybrid 80 is the best 80% on the market today, in a class all its own. Now you can have the ease of machining Nylon with the strength of our brass inserts. Each Liberator comes with a one time use jig and trigger hole guide.
11
15 hours ago
Davidson Defense "Fregata"  AR-15 Pistol Upper Receiver  10.5" 5.56 NATO 4150 CMV 1-7T Barrel  Premium 12" M-Lok Handguard (Assembled or Unassembled) If You Don't Have An AR-15 Pistol Yet, Now Is The Perfect Time To Build One. At This Price There's No Reason Not To Add One To Your Arsenal. This Pistol Upper Kit Once Assembled With Your Favorite Lower And Brace, Will Easily Fit Into Any Collection And Take Up Minimal Space.
0
15 hours ago
Milazzo-Krieger M-K IIA2 Tactical Match Trigger Large Pin Milazzo-Krieger Two Stage Tactical Match Trigger System
0
15 hours ago
Milazzo-Krieger M-K IIA1 Trigger Large Pin Description Milazzo-Krieger Two Stage Match Trigger System For AR15 / M16 Family of firearms. This M-K II requires some hand fitting to install, just like the old days. The user fits the overtravel to the desired distance by trimming the tail of the trigger housing.
0
16 hours ago , by Dealer
AR-15 ''SAFEGUARD'' Carbine Kit ON SALE FOR $369.99 +Free Shipping DISCLAIMER: • Kit shown assembled to display finished product: It does not come assembled • This Kit does NOT include Bolt Carrier Group, Lower Receiver or Magazine AR-15 Free Float Quad Rail Handguard 10" BCA 16" 5.56 Nato Rifle Barrel | Parkerized | Made in U.S.A. AR-15 1/2x28 Birdcage Muzzle Brake W/Crush Washer AR-15 Mil-Spec Upper Receiver | Made in U.S.A. AR-15 Lower Receiver Parts Kit | LPK17 AR-15 Tactical Rifle Charging Handle Assembly AR-15 Ejection Port Cover | Dust Cover Assembly
0
17 hours ago , by Dealer
KAK Halloween Sale: Free Shipping on all orders over $100. Use code "SPOOKY" in your cart before you checkout and save! Not to be used in conjunction with other discounts, dealer codes and it is not retroactive! www.kakindustry.com
0
  • UPC:
  • MPN:
19 hours ago
The Complete Upper Receiver and ATLAS R-ONE Handguard from Aero Precision were designed for premium durability combines with a slim, lightweight profile for the perfect addition to your build. Includes: AR-15 upper receiver ATLAS R-ONE M-LOK handguard (9”) 5.56 CMV barrel (11.5”) Low-profile gas block Carbine-length gas tube Show less A2 flash hider 1/2 X 28 thread pattern Carbine-length gas system 1:7 twist rate Pre-assembled Item No. 648993
27
20 hours ago
Item Number: 719021 Caliber: 5.56 NATO/.223 Remington Barrel: 16.13" Barrel twist: 1:8" Receiver: 7075-T6 forged aluminum A3 flat-top Handguard: 15" M-LOK Muzzle device: A2 Mfg. number: ATI15MS556ML15S
2
20 hours ago , by Dealer
Use code: 15OFF (15% off sitewide) - Free shipping on all orders! Compatible with Gen3 G19 frames. QPQ Nitride treated for increased wear and corrosion resistance. Slide machined 17-4 hardened Stainless steel for long lasting performance. Skeletonized pocket patterns have been machined into this version to enhance aesthetics as well as reduce weight and increase responsiveness. 60 Degree slide serrations. RMR Cap included. 45 Degree chamfered top edges to reduce weight and increase responsiveness. RMR Cut to a depth of .125". 2 front alignment posts incorporated into the RMR cut.
6
  • UPC:
  • MPN:
20 hours ago
Attach this to your AR-15 with a threaded barrel…then use a blank round to "drive" a golf ball that would make Tiger Woods, John Daly or John Rambo proud! No more hooks or slices. It basically works like the military grenade launcher, but it's much more fun. Sturdy made of blued steel. Steel construction Threaded 1/2x28 TPI Powered by blank rounds (not included) Measures 5.2" long Weighs 1 lb., 6 oz. Order today! Key Specifications Item Number: 149893 Material: Blued steel Mfg. Number: AGOLF Item number: WX2-149893
21
21 hours ago
Includes: 1 PSA Upper Build Kit - Barrel nut - Delta ring - Weld spring - Snap ring - Dust cover - Hinge Pin - Dust cover spring - C-clip - Forward assist - Forward assist spring - Forward assist roll pin A high quality lower parts kit needed to assemble your AR-15 lower. Parts are 100% made in USA! Assembly takes place right here at our new facility in Columbia, SC. New Gen 2 Kit!! Features black oxide coated hammer and trigger springs. Includes: Trigger Trigger Spring Hammer Hammer Spring A2 Grip Buffer Retainer Pin Buffer Retainer Spring Trigger Guard
5
  • UPC:
  • MPN:
21 hours ago
Quick Overview SKU: 1563 UPC: 1563 MFR#: 1563 A high quality lower parts kit needed to assemble your AR-15 lower. Parts are made in USA! Assembly takes place right here at our new facility in Columbia, SC. New Gen 2 Kit!! Features  black oxide coated hammer and trigger springs. Starter Kits include 4 additional takedown detents and 2 additional takedown springs SKU: 1563 A high quality lower parts kit needed to assemble your AR-15 lower. Parts are made in USA! Assembly takes place right here at our new facility in Columbia, SC.
2
21 hours ago
The kit includes:PFC9™ Compact Frame (Stripped)Locking Block Rail System and Rear Rail ModuleCompatible with PF-Series™ Compact or Glock® Gen3 G19/23 partsFFL Required Before Shipping.Please have your dealer email their license to [email protected] or they can also fax it in. Please give us a few days to process the information. MPN#: P80-PFC9
0
21 hours ago
The Spike’s Tactical Rare Breed Stripped Crusader Lower Receiver is a quality beginning to any build. These lowers are constructed from 7075-T6 aluminum with a type III anodized hard coat finish for durability and offer high quality features. This Spike’s Tactical receiver boasts a heavy duty trigger guard machined into the lower for optimal durability and strength. The performance of your rifle will be enhanced with the threaded pin for the bolt catch, and it is included with the receiver.
0
21 hours ago
The Midwest Industries .30 Caliber AR-10 Muzzle Brake has a three chamber design that significantly reduces muzzle rise. Durable tool steel construction with a Manganese phosphate finish for corrosion resistance. Features: - 5/8x24 thread pitch - Three chamber design - Tool steel construction - Manganese phosphate finish - Crush washer included - Made in the U.S.A. - Lifetime Warranty - Weight 4 oz
0
21 hours ago
Description PF320PTEX™ Grip Module The PF320PTEX™ Grip Module is P80®’s first polymer grip designed for compatibility with SIG SAUER® components for P320™. Designed and manufactured in the U.S.A., the PF320PTEX™ Grip Modules are made with P80’s proprietary blend of high-strength reinforced polymer, and feature our next generation ergonomics for operators, law enforcement and civilian P320™ owners. Polymer80® products are known for aggressive enhancements to grip shape and angle. Features include: - 1911 Grip Angle - P80’s Signature PTEX™ Grip Texture
0
21 hours ago
100-023-297WB AR-15 D60 60-Rd Drum Magazine w/ 2-pk 30-Rd PMAGs Cartridge: 223 Remington, 5.56 mm NATO Action Type: Semi-Auto Capacity: 30-Round Finish: Black Quantity: 2 Description In this special mix, buy a Magpul D60 Drum Magazine, and get 2 30-rd PMAGs FREE!
8
  • UPC:
  • MPN:
Brownells 7402
21 hours ago
Drops Into Your New Gen 5 Glock Pistol Providing Glock® Gen 5 pistol owners with several aftermarket barrel options, Brownells teamed up with Victory First to produce specially designed barrels that are perfect drop-in fits for the fifth generation of Glock® handguns. The Brownells Edition Glock® Gen 5 Barrels are available in a range of option for owners of this redesigned pistol.
0
  • UPC:
  • MPN:
Brownells 797
21 hours ago
078-000-609WB BRN-180S™ AR-15 10" 300Blk Upper Receiver Assembly Cartridge: 300 AAC Blackout Finish: Black Style: Complete Length: 10" Muzzle: 5/8-24 Twist: 1-8 Specs
0
  • UPC:
  • MPN:
Brownells 1096
22 hours ago
This Foxtrot Mike AR-15 pistol caliber carbine complete upper receiver comes with a huge assortment of features and improvements that can’t be had if you build yours from the ground up. With the FM products .45 ACP AR upper receiver, you get the functionality of a non-reciprocating side charging handle instead of the traditional T-handle. Now you can charge the rifle while still on target without having to lower it from your shoulder. The upper receiver and handguard are a monolithic design with a proprietary lock system that ensures the rail won’t loosen over time.
0
22 hours ago
The Tactical Trigger Group is a completely self contained, 100% drop-in fire control group upgrade for the AR-15, LR-308 and AR-10 rifles. Building on the original Super Match design, the double patented Tactical Flat Trigger design yields truly remarkable and unprecedented trigger control, trigger feel and accuracy, while also the retaining the rugged reliability of a Mil-Spec trigger group. Trigger pull is factory pre-set between 3-1/2 and 4 pounds, and is not user adjustable. Fits all standard Mil-Spec lower receivers with .154" trigger and hammer pin holes. Adjustable: Non-Adjustable
0
22 hours ago
Installed in minutes, the CMC 3.5 - 4 lb Curved AR-15/AR-308 Trigger has a smooth feel and ultra-clean break. With exceptional lock time and lighting fast reset, the curved trigger is unsurpassed by any other fire control group. Trigger pull is factory set between 3.5 and 4 pounds, and is not user adjustable. Fits all standard MIL-SPEC lower receivers milled for .154" trigger and hammer pins. This trigger is a completely self-contained, drop-in fire control group upgrade for AR-15/AR-308 rifles. Features: - Trigger pull weight: 3.5 to 4 lbs.  - Ultra-crisp trigger.
0
22 hours ago
The Sylvan Arms Gen 3 AR-15 Folding Stock Adapter is compatible with 5.56 and .308 pattern rifles and allows you to fold your stock for a more compact package for storage. It simply screws into the receiver extension slot where your buffer tube would and then you screw your buffer tube into the stock adapter. The gen 3 folding stock adapter is CNC machined from 7075-T6 aluminum with a heavy duty hinge and hardcoat anodized black for long term corrosion resistance. Note: Do not fire when open. Features: - Compatible with all AR platforms
5
22 hours ago
The Aero Precision Complete Lower Receiver with SB Tactical Stabilizing Brace is the perfect starting place for your AR pistol build. This complete lower features an X15 Lower and is upgraded to include an SB Tactical SBA4 Stabilizing Brace. The SBA4 is an adjustable ATF Compliant Pistol Stabilizing Brace that provides integral QD sling sockets and increased stability for your AR Pistol. Includes: X15 Lower Receiver Magpul MOE Grip SBA4 Brace Lower Parts Kit Carbine Receiver Extension AR15 Carbine Buffer and Spring MPN#: APAR501168
0
22 hours ago
This grip is constructed from a sturdy fiberglass and then overmolded with soft rubber for Hogue's famous durable, comfortable and secure grip. Features a cobblestone finish, finger grooves and dual palm swells.  Note: Grip screw not included. Brand: Hogue Color: Black Manufacturer.: Hogue Inc. Material: Polymer - Overmolded Platform: AR-15 Storage: Optional Type: Pistol Grip Weight: 4 Oz NOTE: Limit 5 per household. Quantities exceeding 5 will not allow checkout. MPN#: HO15000
0
22 hours ago
The CMMG Lower Receiver Parts Kit for the AR-15 is perfect for shooters who don't use the standard A2 grip or don't need more Mil-Spec fire control components cluttering their parts bin! This parts kit contains all other springs, detents and pins to build out a stripped receiver. This kit does NOT contain a pistol grip, hammer, trigger, disconnector or the springs. Brand: CMMG Manufacturer.: CMMG Platform: AR-15 Weight: 1 Oz MPN#: 55CA601
0
22 hours ago
This 9mm BCG is perfect for your 9mm Pistol Caliber AR-15 Build. Due to the increased rearward velocity, blowback AR systems require a heavier carrier. This AR9 Colt pattern bolt comes in at 14.8 ounces, providing the correct weight needed to tame your blow back system. This BCG works great with any Colt style 9mm rifle and Colt pattern magazines. We highly recommend Metalform mags, which you can purchase here Colt Compatible USA made 8620 Steel Carrier Construction Phosphate Finish Heavy Firing Pin Retaining Spring 14.8 oz. SKU#: 9MM-BCG-C-PH
0
22 hours ago
Note: This is a factory Blem model that may contain cosmetic scratches or miscoloration.
0
22 hours ago
The Strike Industries AR Charging Handle is machined from a 7075-T6 aluminum forging then hardcoat anodized. A raised rear lip helps divert harmful gasses, oil, and dirt away from the shooter, while its polished surface and ergonomic design make for a smooth, reliable action. Built for durability, the SI ARCH is a quality charging handle that will serve your AR well. Features: - Standard latch - 7075-T6 forged aluminum - Polished surface for smooth charging - Hardcoat anodized black - Ergonomic feel
1
22 hours ago
The Low Profile Gas Block is machined from 4140 steel with a blasted manganese phosphate finish. With a very low profile, this gas block should clear most rail systems. For use on barrels with a .750” gas seat diameter. Set screws and gas tube roll pin included. Features: - 4140 steel construction - Manganese phosphate finish - Gas tube roll pin included - .750” gas seat diameter With a reputation for precision manufacturing, KAK Industry offers quality, American made components at affordable prices. Adjustable: Non-Adjustable Brand: KAK Industry Finish: Manganese Phosphate
0
22 hours ago
Convert your AR-15 platform rifle into versatile .410 GA shotgun with this complete upper receiver assembly! This complete upper features a cylinder slug smooth bore, shrouded, 4140 steel barrel and an aluminum receiver. Since it mounts right up to most standard .223/5.56 AR-15 lower receiver, and can shoot anything from birdshot to deer slugs, you now have a fantastic new tool for hunting or home defense! Complete Upper Receiver Includes: Flattop aluminum upper receiver Complete bolt carrier group Dust cover assembly Charging handle Aluminum Picatinny rail handguard Barrel shroud
4
22 hours ago
Exceptionally rugged, combat- and competition-ready magazine functions flawlessly, even when left fully loaded for extended periods. Corrosion-proof, self-lubricating one-piece body of fiber-reinforced, molded polymer has no spot welds or joints to impair the follower, and the constant internal curve ensures smooth, unobstructed movement of the round stack. Anti-tilt follower stabilizes the stack to help prevent nose-diving and bolt-over-head failures. Heat-treated, stainless steel spring is stress-relieved for optimal performance.
82
22 hours ago
- Use this filler to get the coupon code working HERE 780-001-413WB 10/22™ Threaded Takedown Barrel Blued 16-5/8" 1-16 Cartridge: 22 Long Rifle Length: 16-5/8 Finish: Blued Muzzle Threads: 1/2-28 Twist: 1-16
4
22 hours ago
Silencerco’s threaded barrels for Glock® handguns are made from 416R stainless steel and available with a black nitride or natural stainless steel finish. These fit both Gen 3 and Gen 4 Glocks®. 9mm barrels have 1/2x28 threads, while the .45 ACP barrel has .578x28. Includes thread protector. ITEM DETAILS Barrel Length: 5.81" Cartridge: 9 mm Luger Finish: Stainless Steel Style: Threaded Made in the USA MAKE MODEL Make: Glock Model: 34 100-500-304WB
2
22 hours ago
Drops Into Your New Gen 5 Glock Pistol Providing Glock® Gen 5 pistol owners with several aftermarket barrel options, Brownells teamed up with Victory First to produce specially designed barrels that are perfect drop-in fits for the fifth generation of Glock® handguns. The Brownells Edition Glock® Gen 5 Barrels are available in a range of option for owners of this redesigned pistol.
0
1 day ago , by Dealer
New! 6.5 Creedmoor Starter Kits Starting at $129.99
0
  • UPC:
  • MPN:
1 day ago
Specs Lower Receiver Material: 7075 T6 Aluminum with Type III Hard Coat Anodize Hammer/Trigger pin size: Mil-Spec Small Pin .154" Pivot/Takedown Pin Size: .2770" Caliber Marking: MULTI SKU: STAG300823B Made to work with our Stag 10 components and some DPMS components. Our Stag 10 Stripped Lower receiver is second to none in quality. This lower comes with our proprietary pin set for superior fit with a Stag Upper Receiver. Compatibility: Once matched with our Stripped Upper, the use of standard DPMS components and magazines is accepted.
0