MidwayUSA Coupon Codes, Discounts and Deals

(641 deals total)

The Cold Steel Sure Strike is a modern day Shuriken (throwing star). Used for centuries in China and Japan, it consists of no more than a flat piece of steel with 3 or more points. If you throw it overhand like a baseball, side arm, underarm or back hand like a flying saucer, it hits on at least one point every time. Cold Steel's Sure Strikes aren't like the cheap, shoddy throwing stars you see at flea markets, guns shows, and in martial arts magazines.

Strike Eagle riflescopes offer even more features in an updated body, making them ideal for value-minded shooters who need an optic that looks as good as it shoots. A true 1x on the low end adapts to a wide range of scenarios, letting shooters rapidly engage targets from point-blank to extended ranges. To maximize that versatility, you get a glass-etched, illuminated AR-BDC3 reticle, which aids in rapid shooting at near and far distances while providing holdover and ranging references from 0-650 yards.

Smith & Wesson J-Frame revolvers have had your back since 1950. These small revolvers were designed to fire a full power round and are as simple and easy to use as they are reliable. Available in various calibers and with three diverse hammer designs, it is no surprise that the Smith & Wesson J-Frame has become the most popular, small-frame, defense revolver on the market. The Model 442 is a variation of the Model 42 Centennial Airweight that integrates the time-tested features of the original with modern advancements.

Up to 25% OFF Champion Targets & Shooting Gear (discount already applied).

Up to 28% OFF AR-STONER AR-15 Barrels

The MS1 Sling is an optimized, dedicated two-point sling that serves equally well in a one-point role when using optional adapters. Built around the MS1 slider, this system provides rapid adjustments to either lengthen or shorten the sling with no slipping once set, and no tails, loops, or other potential snag hazards. In a two-point role, the MS1 allows easy shoulder transitions, rapid adjustability for hands free rifle carry and shooting support from various positions. The MS1 system also has a series of adapters that are sold separately and based on the MS3 and MS4 slings.

The new and improved AR-STONER™ AR-15 Magazine features a stronger Stainless Steel Body for longer service life and greater resistance to damage than the traditional, aluminum bodied AR-15 magazine. The Enhanced Anti-Tilt Follower and Chrome Silicon Spring contribute to reliable feeding, even after long term storage fully loaded or prolonged use. Made to Military Specifications, the AR-STONER™ AR-15 Magazine can be counted on to perform reliably at the range, in competition, or in the field. Note: Magazine capacities when using 458 SOCOM ammunition are as follows:

All steel construction and push button operation. Fits slings up to 1-1/4" wide. MPN#: 394293 UPC#: 816537015963 MI-F1913

The Trijicon Miniature Rifle Optic (MRO) is a reflex-style, sealed sight intended for use on rifles, carbines, and shotguns to provide fast target acquisition. It is designed to be used with both eyes open, providing the operator with maximum situational awareness. The large aperture and tapered light path maximizes the viewing area in such a small optic, allowing for fast target engagement – especially from non-standard shooting positions. Advanced lens coatings and electronics produce a crisp dot.

The GG Minimalist Plate Carrier is designed based on the mentality of "lighter is better", with a minimum of frills, but a ton of function. Designed to carry 10x12 hard plates or large ESAPI plate, there are six rows of MOLLE/PALS style webbing with built in matching loop material on the top three rows for the option of attaching patches or ID panels. The front of the carrier also features a discrete stash pocket that makes perfect storage for a variety of small items that might be needed in a hurry, such as maps, medevac cards or even a knife.

The Aero Precision M5 LR-308 Stripped Lower Receiver is the perfect base for your custom big-bore AR build. Mil-spec dimensions and coating ensure the highest quality and correct component interface. Aero Precision lowers work with standard AR 308 components and ensure the highest quality with a correct component interface. The upper tensioning feature allows users to fine tune the fit of the upper and lower receiver through the use of a nylon tipped tensioning set screw inserted in the grip tang of the lower receiver. This provides a tight fit with any standard AR 308 upper receiver.  

Sellier and Bellot has been producing cartridge ammunition since 1825. The year 2009 saw one of the milestones in the history of the company, the Brazilian company Companhia Brasileira de Cartuchos S.A. (CBC), also known under the name of Magtech, became the owner of Sellier & Bellot. Another group member is the German company MEN, a globally renowned producer of small-arms ammunition for the military, police, and commercial markets. Due to the merger into one group, the mentioned companies have become more competitive and rank among the largest producers in the world.

The Walker's Razor-XV 3.0 with Bluetooth Neck Worn Rechargeable Electronic Ear Plugs is a non-intrusive neck worn design with flat, no-tangle cables. The free control app allows for complete control of your razor XV from your SmartPhone. This model features improved battery life and wide connection range retractable earbuds at the ready. Features - Retractable Digital Ear Buds - Bluetooth Connectivity - Rechargeable Lithium Battery - Hi-Gain Omnidirectional Microphones for clear sound enhancement - Earbuds in improved Position for less cord interference

Similar in size and weight to the small-frame snub-nose revolvers it has replaced, the Glock 26 fires the popular 9mm Luger cartridge with minimum recoil and more on-target accuracy at a fast rate of fire. It’s an ideal backup for those who use the Glock 17 or Glock 19 for open carry, even more so since the larger 9mm magazines fit the G26 as well. MPN#: 326175 UPC#: 764503265020 PI2650201

This lower receiver parts kit includes everything needed to build a complete lower receiver, less a stock assembly of your choice and a stripped lower receiver. This kit features an improved two-stage combat trigger with a lighter pull weight over a standard mil-spec trigger, (4.2-4.6 lb pull for two-stage trigger). All parts are made to standard military specifications. Kit Includes - Pistol Grip - Trigger - Hammer - Disconnector - Selector - Bolt Catch Spring - Detent Spring - Bolt Catch Button - Take Down Detent - Bolt Catch - Magazine Catch Spring

This 25 round black polymer magazine is made specifically for the Marlin 795 chambered in .22lr. The magazine body is constructed of a proprietary DuPont Zytel based polymer to ensure a long service life. All components proudly made in the U.S.A. MPN#: 923385 UPC#: 708279011269

Thumler's Tumblers are heavy duty tumblers that will last a lifetime. The professional quality tumbler is built strong to last. They feature a heavy-duty motor, steel hexagon barrel with removable rubber lining and efficient and quite operation. The Model B is perfect for reloaders looking to use a liquid media or even stainless steel tumbling media, but will work equally well with dry media. Barrel Inner Dimensions: 8" x 7-1/2" x 6-1/2" Notes: The motor turns at 3000 , turning the barrel at 40 MPN#: 426185 UPC#: 051442100179

This Adams Arms P1 Mid Gas Piston Upper Assembly is chambered in 5.56x45mm NATO and comes ready to fire right out of the box after installation onto any standard AR-15 lower receiver. The Base Mid upper comes equipped with a 16" melonite-finished barrel, A2 flash hider, bolt carrier group, charging handle, picatinny rail gas block, delta ring assembly and Magpul MOE handguards.

The Del-Ton Carbine Kit includes everything you need to turn your stripped lower receiver into a complete rifle. The complete assembled upper receiver features a flattop upper receiver with a 16" M4 profile chrome moly barrel. The 5.56x45mm NATO chamber, 1 in 9" twist, and M4 feed ramps ensure reliability with a wide variety of commercial and surplus ammunition. The M4 upper features a carbine length gas system and sight radius. The lower parts kit includes all of the pieces to complete your lower receiver, including a M4 style collapsible buttstock. Lower Parts Kit Includes:

The Daniel Defense Detachable AR-15 Front Sight incorporates an unobtrusive, snag-resistant profile with innovative design elements that facilitate the use of a forward-mounted, compact tactical light. The one-piece sight is machined from 6061-T6 Aluminum with a Mil-Spec Type III Hard Coat Anodized Finish, and easily secures to a Picatinny-Spec Rail with a slotted screw that is threaded into a self-locking steel insert.

The AR-STONER™ A2 Flash Hider with 1/2" - 28 threads is an effective option for reducing muzzle flash from AR-15 rifle barrels. This high quality, matte steel, flash hider is ready for installation on your AR-15 rifle. Note: The use of a crush washer is recommended. MPN#: 691158 Product #: 691158 Manufacturer #: A2-FLASH-556

The Lee Breech Lock Challenger Press is a great press that is full of features. Some of these features include a the breech lock quick change die system that holds dies in inserts that allow the reloader to quickly remove them from the press, a steel ram and operating linkage, a very strong "O" frame that is larger than the average press opening giving reloaders maximum hand clearance. When depriming with the Breech Lock Challenger Press spent primers are sent directly into the trash can helping to keep reloading areas nice and clean.

Winchester USA Ammunition 5.56x45mm NATO 62 Grain M855 SS109 Penetrator Full Metal Jacket is loaded to NATO specifications. It is not intended for use in commercial bolt-action rifles chambered in 223 Remington. The full metal jacket bullets feature a steel core and green penetrating tip. Brass cases are reloadable.   No matter which Winchester ammunition you choose, when you load up with Winchester, you're getting precision technology, the highest quality components, optimum reliability and superior performance.  

The versatility the Burris Signature HD 3-15x44 scope shines for shooters needing bright, clear view sat a wide range of distances. The choice of either the Ballistic E3 Illuminated or Plex reticle delivers accurate shots both near and far. Precise side parallax focus, push/pull and zero-stop locking turrets give shooters complete control.   MPN#: 742572 UPC#: 000381005311 200531

The Sig Sauer Magazine features a unique capacity witness hole that remains visible while the magazine is inserted in a standard P365. This allows full capacity status to be verified without removal of the magazine. The installed baseplate leaves no gap when inserted into a standard P365.     MPN#: 752842 UPC#: 798681583621 31.65

The fastest, most accurate, ultra-compact micro reflex sight - the ROMEOZero has been optimized for everyday concealed carry and pistols with slim slide profiles. The sight features a ruggedized, WeaponsGrade textured polymer body and the SpectraCoat HD Polymer lens system. The ROMEOZero enables rapid target acquisition in an everyday carry package at an iron sight price. Features: - SpectraCoat HD Polymer Lens with 10 times the impact resistance over traditional glass lenses

Designed for concealed carry, the M&P Shield Plus is the most advanced M&P Shield pistol to date, featuring a magazine capacity up to 13 rounds in a slim, micro-compact frame. Packed with popular features such as a flat-face trigger, large capacity magazine, optics cuts, and more, the M&P Shield Plus product line has been designed to meet the needs of today’s firearm consumer.  

With its lightweight 22 oz. polymer frame, thin profile, and ramped 3.2 inch barrel, the Taurus Millennium G2 is the ideal concealed carry handgun. Available in two compact models, the Millennium G2 features an accessory rail, high-profile sights, an aggressive, textured grip and melted edges for added comfort and easy concealment. Features Genuine Picatinny Rail allowing use of many accessories Loaded chamber indicator Re-Strike Capability Taurus logo warning-icon WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov. Product Information Cartridge 9mm Luger

Full Metal Jacket Bullets are designed so that the bullet is completely encased in a hard metal jacket (except for the base), which is not intended to expand upon impact. The Boat Tail design is to provide a flatter trajectory and long range performance by raising the ballistic coefficient. These bullets are primarily used for target shooting and plinking. Also ideal for varmint hunting, this bullet will deliver deep penetration and bone shattering results while also protecting the integrity of the pelt at the same time. This is not loaded ammunition. Technical Information:

The Barnett Explorer XP370 Crossbow Package series introduces impressive power and performance in an affordable crossbow package. The XP370 features an anti-vibration foot stirrup and adjustable butt stock, with compression-molded limbs allowing the compound crossbow to reach speeds up to 370 feet per second. It all combines into an overall shooing experience that’s truly next level. The sleek, blacked-out crossbow comes ready-to-hunt with two carbon arrows, red dot sight, rope cocking device and lightweight quiver all included. Features - Crank Cocking Device Compatible

Speer Gold Dot Ammunition is loaded with bonded core bullets and designed for home defense and personal protection. Bonding the jacket to the core means the elimination of core-jacket separations and superior weight retention. This ammunition is new production, non-corrosive, in boxer primed, reloadable brass cases. MPN#: 685711 UPC#: 604544647297 23970GD

Del-Ton AR-15 Pistol A3 Flat-Top Upper Assembly 5.56x45mm NATO 1 in 9" Twist 11.5" Government Contour Barrel Chrome Moly Matte with CAR-Style Handguard, Flash Hider. This Del-Ton Pistol Flat-Top AR-15 Upper Receiver comes complete and fully assembled, ready for installation onto any mil-spec lower receiver. The forged 7075 T6 Aluminum upper features an 11.5" Government Contour Barrel, Carbine-Length Gas System, F-Marked Front Sight Assembly, 2-Piece CAR-Style Handguards and an A2 Flash Hider.

Del-Ton AR-15 A3 Flat-Top Upper Assembly 5.56x45mm NATO 1 in 9" Twist 16" Mid Length Lightweight Contour Barrel Chrome Moly Matte with CAR-Style Handguard, Flash Hider. This Del-Ton Lightweight Mid-Length A3 AR-15 Upper Receiver comes complete and fully assembled, ready for installation onto any mil-spec lower receiver. The forged 7075 T6 Aluminum upper features a 16" Lightweight Contour Barrel, F-Marked Front Sight Assembly, 2-Piece Polymer Handguards with heat shield and an A2 Flash Hider.

Del-Ton AR-15 A3 Flat-Top Upper Assembly 5.56x45mm NATO 1 in 7" Twist 16" M4 Contour Barrel Chrome Lined Chrome Moly Matte with CAR-Style Handguard, Flash Hider. This Del-Ton M4 Carbine Flat-Top AR-15 Upper Receiver comes complete and fully assembled, ready for installation onto any mil-spec lower receiver. The forged 7075 T6 Aluminum upper features a 16" Chrome Lined M4 Contour Barrel, Carbine-Length Gas System, F-Marked Front Sight Assembly, 2-Piece CAR-Style Handguards and an A2 Flash Hider.

MidwayUSA is proud to offer this AR-Stoner A3 Upper Receiver Assembly at an exceptional price! This AR-Stoner carbine length upper features a mil-spec bolt carrier group, phosphate finish, A2 fixed front sight and a light-weight government profile barrel. The A3 upper will attach to virtually any standard AR-15 lower receiver and comes complete with charging handle, forward assist, ejection port cover, bolt and bolt carrier assembly. With a 1 in 9" twist, the 16" barrel provides outstanding accuracy that has been enjoyed by competition shooters worldwide.

The Lancer Systems L5 AWM Advanced Warfighter 300BLK magazine has been specifically engineered for use with heavy subsonic .300 Blackout ammunition, particularly with 200+ grain projectiles. The updated internal magazine geometry allows these longer heavier bullets to stack properly, which increases feeding reliability when compared to a traditional .223/5.56 magazine. The outside of the mag body is molded with distinctive .300 Blackout markings and the magazine ships with a contrasting flat dark earth floor plate for easy visual identification.  

Aguila ammunition is an excellent choice for the high-volume shooter looking for clean, accurate, and consistent ammunition. Loaded with a 55 Grain Full Metal Jacket bullet, this ammunition is perfect for target shooting. This ammunition is new production, non-corrosive in boxer-primed, reloadable brass cases. Technical Information Caliber: 223 Remington Bullet Weight: 55 Grains Bullet Style: Full Metal Jacket Case Type: Brass

The Midwest Industries Chassis for the Ruger 10/22 is a perfect upgrade for a classic rifle. The Chassis has a threaded end to accept AR15/M4 Buffer Tubes, and features a slim lightweight profile and two anti-rotation QD sling sockets. The Chassis is constructed from 6061 aluminum and hard coat anodized. All tools and mounting hardware are included with the Chassis.   Features - Hard Coat Anodized - Slim Light Weight Profile - Threaded End to Accept AR15/M4 Buffer Tubes (Compatible with both commercial and Mil-Spec tubes) *Tube and castle nut not included

The Ruger AR-556 rifle is a gas impingement driven, box magazine fed, autoloading rifle. The mechanism utilizes the gas from the firing of the round to drive the bolt carrier rearward and rotate a bolt that locks into the barrel. The AR-556 rifle can be field stripped without the use of tools and breaks down into basic subassemblies. The safety, located above the trigger on the left side of the lower receiver, blocks the trigger and permits the bolt carrier to be cycled with the safety in the on or “SAFE” position.

The AR-STONER AR-15 Side Charging Upper Receiver assembly chambered in 350 Legend delivers precision accuracy at an affordable price. The machined billet aluminum upper receiver is combined with an extruded aluminum free float M-LOK handguard and both are Type III hard coat anodized. This complete upper features a carbine length gas system, a mil-spec bolt carrier group, 16” M4-profile barrel with a parkerized finish and a lightweight 15” free float AR-Stoner M-LOK handguard and a flash hider.

Designed for concealed carry, the M&P Shield Plus is the most advanced M&P Shield pistol to date, featuring a magazine capacity up to 13 rounds in a slim, micro-compact frame. Packed with popular features such as a flat-face trigger, large capacity magazine, optics cuts, and more, the M&P Shield Plus product line has been designed to meet the needs of today’s firearm consumer.  

Designed for concealed carry, the M&P Shield Plus is the most advanced M&P Shield pistol to date, featuring a magazine capacity up to 13 rounds in a slim, micro-compact frame. Packed with popular features such as a flat-face trigger, large capacity magazine, and more, the M&P Shield Plus product line has been designed to meet the needs of today’s firearm consumer.  

Designed for concealed carry, the M&P Shield Plus is the most advanced M&P Shield pistol to date, featuring a magazine capacity up to 13 rounds in a slim, micro-compact frame. Packed with popular features such as a flat-face trigger, large capacity magazine, optics cuts, and more, the M&P Shield Plus product line has been designed to meet the needs of today’s firearm consumer.  

The patent pending Talon 45/90 ambidextrous safety allows the shooter to easily switch from a 90 degree throw to a 45 degree short throw without removing the safety from the lower. The Talon also features a screw-less design so you never have to worry about levers coming loose or falling off. This kit includes a 2-lever set (long & short). Made in the USA from 7075 aluminum, the Talon is engineered with the highest quality standards. Features - Ambidextrous design - Screw-less design to prevent lever from coming loose

The ALG Defense ALG Combat Trigger (ACT) is an enhanced Mil-Spec type AR-15 trigger. The ACT is very similar to Mil-Spec units in pull weight, but the polished surfaces and hard-lubing result in a smoother pull with a sharper break. The ACT now includes two hammer springs. The purple hammer spring installed on your ACT will provide an approximate pull weight of 4.5 lbs. You can replace the purple spring with the provided tan spring, giving you a pull weight of 6.0 lbs.

This updated favorite hands an unfair advantage to shooters who seek to keep the upper hand in every situation from close quarters to long-range shots. The illumination dial is cleanly integrated into the side focus adjustment knob for easy access and streamlined performance. The glass-etched reticle offers shooters highly functional, intuitive, and detailed hold points, yet remains uncluttered for optimal viewing and features 10 intensity levels with off positions between each setting. Features - Extra-low dispersion (XD) glass increases resolution and color fidelity

Ergonomics and performance have become the standard of the Sig Sauer P320 XSeries. Now, all of these features are available in an compact size. The P320 XCompact features a completely redesigned modular polymer XSeries grip with a reduced fastback carry cut and a low-profile internal magwell. Combined with the extended beavertail and high undercut trigger guard, the XCompact offers ultimate comfort and concealability AND improved recoil control. The 3.6” barrel and XSeries slide with enhanced serrations come equipped with the X-Ray3 day/night front sight with rear night sight plate assembly.

Product Information Frame Material Cast Iron and Steel Press Type Turret Press Priming Feature Yes Handle Location Ambidextrous Number of Mounting Holes 3 Die Size Accepted Standard 7/8"-14 Threaded Dies Die Bushing Accepted No Mounting Hardware Included No Ram Stroke 3.5 Inches Ram Diameter 1.13 Inches Frame Opening Size 4.5 Inches Country of Origin United States of America

The Bushnell Engage Riflescope represents the latest evolution in Bushnell optics. The Deploy MOA reticle features 1-MOA windage and elevation hashmarks and can reach short and mid-range targets. It adapts to various loads and calibers and is ideal for hunters and target shooters. Dialing in the scope is easy too, with Tool-less Locking Turret (TLT). The TLT also allows for Tool-less ZERO Reset. 

The Tekmat Handgun Gun Cleaning Mat are large enough to handle a fully disassembled handgun with room to spare for tools and accessories. The 1/8” padding on these mats not only provides a premium feel and high level of quality but it offers extra protection from any rough handling or drops while working on your firearm. The ultra soft, oil and water-resistant surface helps protect your firearm from scratches while the diagrams and illustrations help with cleaning, disassembly and are just plain fun to look at.   MPN#: 336039 UPC#: 612409970589

The Do-All Clay Cannon is the first ever handheld clay pigeon launcher that will throw a mix of clay pigeons at one time in almost any direction you aim. It can handle multiple clays stacked/nested, or even 2 Midi or 2 Mini clay pigeons side-by-side. For the first time ever it is now as much fun to throw clay pigeons as it is to shoot them. Weighing less than 5 lbs. the Clay Cannon has unmatched maneuverability. It is simple to use and provides hours of clay shooting entertainment. Features - Easy to cock - No batteries required - Launch up to 60 yards

The game changing Sig Sauer P365.  Micro-compact everyday carry size with unprecedented 10+1 full-size capacity. The P365 is striker-fired, with the clean crisp trigger pull you expect from a SIG. Lightweight and easy to conceal, the P365 is chambered in 9mm and is rated for +P ammunition. Included standard are XRAY3 Day/Night sights, a 10-round flush fit magazine, and a 10-round extended grip magazine. The P365-MS variant includes all the features of the original award-winning P365 with the addition of an ambidextrous manual safety. Features - XRAY3 day/night sights

Cartridge 32 Gauge Quantity 25 Round NonToxic No Shell Length 2-1/2" Shot or Slug Type Lead Shot Shot Size #6 Buffered No Muzzle Velocity 1260 Feet Per Second Primer Boxer Corrosive No Reloadable Yes Barrel Type Smooth Bore Shot Weight 1/2 Ounce Crimp Roll

AR-STONER™ offers replacement components for the AR-15 that are made to strict military specifications. These high quality components provide excellent fit and reliable function in your AR series platforms. These AR-STONER™ parts are perfect for upgrading existing components or replacing worn or broken parts.   Includes: Charging Handle, Latch, Latch Spring, Latch Roll Pin   Features - Mil-Spec Part - Great for New Builds or Replacing Worn Parts - Dependable Parts at an Incredible Price MPN#: 205684 CH-Assembly

The Ruger Security-9 is a lightweight, compact, single action, magazine-fed, recoil-operated pistol chambered for the 9MM Luger cartridge. The Security-9 incorporates a “link-less” barrel, an alloy steel slide, and a glass fiber reinforced nylon grip with an aluminum insert. The strong locked breech action of the Ruger Security-9 utilizes a tilting barrel design in which the barrel and slide are locked together at the moment of firing. MPN#: 939139 UPC#: 736676038107

OverviewFeaturesSturdy corner grommets allow for staking down to prevent lift from wind or muzzle blastEquipped with non-skid elbow and knee padsIncludes handle and shoulder strapLegal for High Power/CMP rifle matchesLegal for Smallbore competitionBottom of mat is constructed of textured, non-skid, water-resistant materialWhen MidwayUSA set out to develop our competition shooting mat, we relied on our highly experienced staff for research and development.

The new XPS series of sights from EOTech are the shortest sights from EOTech to date which leaves you with more rail space than other EOTech sights. This smaller sight runs on a single CR123A battery which provides a life of up to 600 hours. Having a shorter sight allows for more room to mount detachable iron sights for backup, or to mount any other accessories you might want. EOTech XPS sights feature an integral mount for use on Picatinny or Weaver-style rails. MPN#: 352394 UPC#: 672294600206 XPS2-0

Del-Ton AR-15 A3 Flat-Top Upper Assembly 5.56x45mm NATO 1 in 9" Twist 20" Government Contour Barrel Chrome Moly Matte with A2 Handguard, Flash Hider. This Del-Ton Rifle A3 Flat-Top AR-15 Upper Receiver comes complete and fully assembled, ready for installation onto any mil-spec lower receiver. The Forged 7075 T6 Aluminum upper features a 20" Government Contour Barrel, F-Marked Front Sight Assembly, 2-Piece Polymer A2-Style Handguards with heat shield and an A2 Flash Hider.

This EOTech Sight features a heads up design that allows both eyes to be open in order to maintain peripheral vision and depth perception while shooting. It features a sleek, low profile design that points naturally. The reticle provides fast target acquisition and precise aiming options. Features an integral Weaver-style base, uses AA batteries and runs for 600 hours on alkaline or 1100 hours on lithium. EOTech Sights are covered under a 2 year factory warranty. MPN#: 453878 UPC#: 672294512653 512.A65

The Seekins Precision Adjustable Gas Block lets you to fine tune your rifle's gas system for smoother cycling and operation. Regulating the amount of gas used to cycle the action allows tuning the rifle’s operation to a specific load and the use of low mass bolt carriers, buffers and springs to reduce felt recoil. This is critical to allow faster follow up shots, target acquisition and reliability.