GrabAGun.com Coupon Codes, Discounts and Deals

(2,892 deals total)

Revolution Gen4 Features The Revolution is POF's 308 that handles like a 5.56 - because it is the same size and weight as one by using a 5.56 bolt carrier and other 5.56 parts allowing for a shorter overall receiver size and reduced weight. The Revolution features many 5.56 parts; such as charging handle, bolt carrier, cam pin, buffer, heat sink barrel nut, handguard, and 5-position gas piston operating system. The barrel extension, bolt assembly, upper, and lower receiver are the exact same size as those on an AR15.

Renegade Plus Features POF's Renegade Plus AR Pistol addresses all of the weak points of the direct impingement system with upgrades that go well above mere aesthetics, including POF roller cam pin and patented heat sink barrel nut. The Dictator 9-position adjustable gas block gives ultimate control, whether tuning for ammo load or suppressor use, and the straight gas tube eliminates heat build up from the weak points of standard gas tubes. The Renegade Plus is built off of the Gen 4 billet lower receiver and Ultimate Bolt Carrier Group.

CPX-2 RD Features Chambered for 9mm, it has a 3.1" barrel with a 16:1" right hand twist. The receiver is made from 7075 T6 aircraft grade heat treated aluminum alloy. The Zytel polymer frame features ergonomic finger grooves and an integral recoil cushion on the back-strap. The slide is machined from stainless steel with a Zytel over-molded polymer extension for ease of operation. Now taken to the next level, the CPX-2 RD comes equipped with a Crimson Trace CTS-1500 Reflex sight.

Freedom Ordnance FX-9P8S Pistol Features The FX-9P8S pistol (Freedom Xtreme) has a familiar set of operating controls for the avid AR-15 user, it accepts AR-15 stocks and buffer tube assemblies, as well as most free float AR-15 rail assemblies. It features an SB Tactical SBA3 pistol brace and 7.5" M-Lok Ultra Slim rail. The FX-9P8S is machined from billet material, anodized type III aluminum components, and full hard nitride steel components including the barrel, bolt, ejector, last round hold open, feed ramp, and extractor for extended wear properties and corrosion resistance.

POF Revolution Features The Revolution DI (Direct Impingement) features the same technology, durability, features, and AR-15 size, but in a smaller direct impingement system featuring a 9-position adjustable Dictator gas block and Renegade rail. The DIctator Adjustable Gas Block lets you tune your rifle to the exact operating speed it should be. Its adjustable settings and included a straight gas tube, you and your rifle are set for just about any situation.

CA5FIVE6 Features The NEW CA5five6 is a serious top-tier contender in the field. The build features a forged aluminum receiver set and a Black Nitride finished BCG matched with a Christensen Arms carbon fiber wrapped barrel and a new carbon-aluminum hybrid handguard. The modern sporting rifle is also equipped with a three prong flash hider and a single stage match-grade trigger assembly. The CA5five6 weighs in starting at 6.3 pounds and is backed by the Christensen Arms Sub-MOA Guarantee.

DB 15 AR Rifle Features This DB15 rifle features a carbine-length, medium 4150 ChromeMoly barrel, mid-length gas system with pinned gas block, and a shot-peened Mil-Spec 8620 bolt carrier. It utilizes 7075-T6 aluminum receivers, 15" M-Lok anti-rotation handguard, Magpul MOE-K2+ grip, and a Magpul ACS-L stock.

M&P15-22 Features The M&P15-22 Pistol features a M&P handguard with M-LOK slots, 2 position safety, SB Tactical SBA3 adjustable arm brace, and a full length Picatinny-style rail. It utilizes a one-point QD sling swivel attachment point and a threaded barrel with a flash suppressor. Included is one 9mm 25-round magazine.

3 Pistol Features TROY Line of Pistols are lightweight and ultra-low profile. Developed specifically for today’s war fighter and Law Enforcement led by Special Operations field requirements 3 Pistol Specifications Manufacturer: TROY Manufacturer Part #: SPST-CA3-10BT-01 Model: Limited Edition Model: A3 Pistol Action: Semi-automatic Type: AR Caliber: 5.56 NATO / 223 Remington Barrel Length: 10.5" Color: Black Capacity: 30Rd Finish: Matte UPC#: 810038641751

DelTon AR 15 for Sale - DT Sport Model 2 FAMILY:AR-15 Rifle Series  MODEL:DT Sport - Mod 2  TYPE:Rifle  ACTION:Semi-Auto  FINISH:Matte Black  STOCK/FRAME:Collapsible / Folding Stock  STOCK/GRIPS:6 Position Adjustable  WEIGHT:5.8 lbs.  CALIBER/GAUGE:223 Rem | 5.56 NATO  CAPACITY:30 1  # OF MAGS:1  MAGAZINE DESC:30 rd. Steel Mag  BARREL:16"  OVERALL LENGTH:32.625" - 36.375"  RATE-OF-TWIST:1-in-9"    SIGHTS:Flip-Up Rear/A2 Front Sight  ADDL INFO:Forward Assist / Dust Cover  ADDL INFO:Lightweight Melonite Barrel  ADDL INFO:Flip-Up Rear Sight MPN#: DTSPORT-M2 UPC#: 848456002304

Daniel Defense DDM4V7 Deep Woods The Daniel Defense V7 is the first rifle in the DDM4 lineup to feature the M-LOK® attachment technology with the Daniel Defense MFR 15.0 rail. Built around a Cold Hammer Forged, 16” barrel, the V7 has a DD improved Flash Suppressor to reduce flash signature.

320 Security Features The Stevens 320 Security pump shotgun uses a proven rotary bolt design and dual slide bars. It is a bottom load, right eject, and has a tube magazine with a 5-round capacity. The 320 Security has an 18.5" carbon steel barrel with a cylinder bore and a blued metal finish. This 20 gauge model has a ghost ring sight and black synthetic buttstock with a pistol grip.

1911 A1 Government Features Iver Johnson Arms 1911 is a Series 70 pistol which means there is no firing pin block and comes with a flat, serrated, steel mainspring housing to hold up to the rigors of an everyday shooter. It features a finger relief cut near the trigger guard for a more comfortable shooting experience. It also utilizes a forged slide and cast frame, which are CNC machined and then hand fitted to exceptional tolerances. Each slide is fit to an individual frame to give it a tight out of the box fit.

Smith and Wesson M&P9 Shield Stainless Description The Smith & Wesson M&P has a reinforced polymer chassis, superior ergonomics, ambidextrous controls, and proven safety features. In designing the M&P, Smith & Wesson considered the needs of military and law enforcement from every conceivable angle, so the M&P is the standard in reliability when your job is to serve and protect and your life is on the line. The M&P Shield is slim, lightweight, and easy to conceal. This model features two magazines, white-dot sights, and a manual safety.

All-Weather Lever Action Features The Henry Repeating Arms All-Weather Lever Action Rifle has a 20" round barrel, 5-shot magazine, and adjustable buckhorn/bead sights. Additional features include pistol grip stained hardwood with a rubber buttplate. The metal surfaces are all hard chrome plating (except springs and sights) that has been drilled and tapped for a Weaver 63B mount. In a tough world where a working rifle might be "rode hard and put away wet", this is the finish you want on it.

Protector Elite Carbine Features Wilson Combat's Protector Elite is built with a fully machined upper and lower receiver from a solid billet of aluminum. The rifle features match grade stainless barrel with Q-Comp flash hider and a mid-length gas system for enhanced reliability and durability with low profile gas block. It utilizes a M-LOK compatible hand-guard with a 4 accessory rail and QD sling mount, nitride coated precision BCG, M2 two-stage TTU trigger and a Wilson/Rogers super-stoc buttstock with BCM Starburst pistol grip. Includes matched Billet receiver set.

Protector Elite Carbine Features Wilson Combat's Protector Elite is built with a fully machined upper and lower receiver from a solid billet of aluminum. The rifle features match grade stainless barrel with Q-Comp flash hider and a mid-length gas system for enhanced reliability and durability with low profile gas block. It utilizes a M-LOK compatible hand-guard with a 4 accessory rail and QD sling mount, nitride coated precision BCG, M2 two-stage TTU trigger and a Wilson/Rogers super-stoc buttstock with BCM Starburst pistol grip.

We currently have 7 different model 1911's available._ They are all 1911A1 style, except they do not have the rounded backstrap._ They have a steel, flat, serrated backstrap._ They do have the finger relief cut in the frame near the trigger guard._ There are 6 models pictured below._ Our 1911's are assembled in the Philippines by Shooters Arms Manufacturing, but they are made to our spec and our design, using our parts.All models have a forged slide that is CNC machined, and a cast frame that is CNC machined._ All models have MIM parts, and the slide and frame are hand fitted for a nice, tight

Combat C Features Compact size semi-automatic double-action pistol made entirely of high strength steel. It has black rubber grips, reversible magazine catch and blue magazine. It is produced in both F version (COMPACT model), with a "cocked and locked" safety mounted on the frame and in R version (STANDARD COMPACT model) that has an ambidextrous firing pin safety mounted on the slide that works as a hammer decocker. The COMPACT model for its small dimension is ideal for concealed carry. Combat C Specifications Total Length: 7.48" Barrel Length: 3.66" Weight: 2.2 lbs Action: D.A.

Aug A3 M1 NATO Features The iconic bullpup-style Steyr AUG has been one of the most recognizable rifles in the world since its adoption by the Austrian army in 1977 and is now available for civilian use as the Steyr AUG A3 M1. The short-stroke gas-piston operation of the AUG runs exceptionally cleaner by nature because all of the operational exhaust gas vents out of the front of the rifle. The AUG A3 M1 has all the classic features and benefits that established it as the pinnacle of modern rifle design.

WMD Guns, Beast, Semi-automatic Rifle, 556NATO, 16" Barrel, 1:7 Twist, Nickel Boron Finish, 5 Position Stock, 30Rd, Quad Rail, Drago Gear Custom Softcase and 2 Magazines MPN#: NIBX556 UPC#: 855899003867

Commando Features Commando pump shotguns are built using a new design that allows for strength, simplicity of operation, and lightweight. You will notice the ease that the barrel, fore-end and bolt may be removed as a unit to facilitate cleaning. And smoothness of function is uniform whether firing light 2¾" shells or heavy 3". All materials are the finest for their intended purpose assuring years of trouble free operation.

Girsan MC28SA Features The MC28SA is a striker fired pistol that features low profile 3-dot sights, integral trigger safety, and interchangeable grip inserts. Girsan MC28SA Specifications Caliber: 9mm Luger Model: Girsan Series: MC28SA Frame Finish: Black Action: Striker Fire Barrel Length Range: 4" to 4.99" Slide Description: Black Steel Capacity: 15+1 Frame Material: Polymer Grips: Black Polymer Hand: Right OAL: 7.60" Safety: Trigger Sight Configuration: 3 Dot Sight Style: Adjustable Weight: 1.80 lbs Barrel Length: 4.25" MPN#: 390100 UPC#: 741566903380

For outstanding performance and ideal concealed carry, look no further than the Taurus® G2C. Thanks to its textured grips and melted edges, this semi-automatic handgun is exceptionally easy and comfortable to hold and use. The G2C features performance-driven autoloaders, making it the ideal handgun for both self defense and target shooting. If target shooting is your pleasure, you'll appreciate the speed that this gun's high-profile sights afford you. Like previous G2 models, the G2C features a Picatinny rail for adding accessories.

All Gen Features The All Gen pump is an efficient and reliable no-nonsense 410GA shotgun. It features a lightweight aluminum receiver with a 5+1 capacity. Comes with lightweight polymer furniture and 26 vent rib barrel reamed for full.

320 Security Features The Stevens 320 Security pump shotgun uses a proven rotary bolt design and dual slide bars. It is a bottom load, right eject, and has a tube magazine with a 5-round capacity. The 320 Security has an 18.5" carbon steel barrel with a cylinder bore and a blued metal finish. This 20 gauge model has a bead sight and black synthetic buttstock with a pistol grip.

SAR USA ST9 Pistol Features The ST9 is a striker fire polymer frame pistol with a host of features. These features include ambidextrous magazine release, and frame safety, 3 dot adjustable low profile sights, interchangeable backstraps to customize your fit, front and rear serrations on the slide to make it easy to manipulate the slide, and picatinny frame rail to add your favorite accessories. The rear of the slide features a red flag indicator that shows when the pistol is cocked and loaded. When the trigger is pulled, the red flag disappears to show the gun is not loaded and safe.

TP9SFx Features Century's TP9SFx striker fire pistol comes with standard dovetail sight cuts, single action trigger, and a MIL-STD-1913 Picatinny rail. This model features Warren Tactical sights with a red and green fiber optic front. The rear sight is installed in a removable red dot cover to eliminate interference with certain red dot sights. It includes four red dot interface plates. The TP9SDFx also has a match grade barrel, loaded chamber indicator, reversible ambidextrous cocking lever, extended ambidextrous slide stop, and reversible magazine catch with two additional sizes.

Sierra 316L M2 Optics Ready Features This rifle has a 16" mid-length heavy barrel with 1x9 twist, Magpul MOE Black stock, Magpul MOE Black handguards, Magpul MOE Black Grip and A2 flash hider. The rifle also comes with 1 x 30rd PMag and a CA approved Gun Lock. Shipped with a Chamber Safety Tool in the chamber, showing clearly the weapon is unloaded.

TX 801 Features This Landor Arms TX 801 lever shotgun features a 21.50" barrel with 3 chokes. It has a wood checkered stock with rubber butt pad, brass bead front, and a blued finish. TX 801 Specifications Model: TX 801 Gauge: 12 Gauge Stock Finish: Wood Action: Lever Barrel Length Range: 20" to 21.99" Sights: Bead Front Capacity: 4+1 Chokes Included: 3 Hand: Right Receiver Finish: Blued Receiver Material: Steel Stock Description: Checkered Stock Finish Group: Brown Stock Material: Wood Weight: 7 lbs Barrel Finish: Blued Barrel Length: 21.50" MPN#: LDTX8011221 UPC#: 000000000000

Girsan MC1911C Features The Girsan MC1911C, form EAA, is a budget friendly 1911 that packs all of the features that high end 1911's carry. This model features novak style rear sights, ambidextrous safety, extended beavertail, deep slide serrations, 5 MOA optic, and a crisp 3.5-4 lb trigger pull.

Kahr Arms, CW9, Striker Fired, Compact Pistol, 9MM, 3.56" Barrel, Polymer Frame, Matte Stainless Finish, Front Night Sight, 7Rd, 1 Magazine MPN#: CW9093N UPC#: 602686047395

M400 Tread Features The Sig M400 Tread and Riflescope package includes a factory mounted 3.5-10X42mm Sierra3 BDX riflescope with 8 on board Smart BDCS. The Tread features a free floating M-LOK handguard, mid-length gas system, ambidextrous controls, Sig enhanced trigger, 6-position SL-K stock and a black polymer grip. The Sierra3 BDX is mounted with Alpha rings.

AR-15 Billet Rifle Features High quality components and precise manufacturing make Black Rain Ordnance firearms ideal for both new shooters and experienced gun owners. The durability, reliability and excellent build quality will ensure years of service you can count on. AR-15 Billet Rifle Specifications  Manufacturer:Black Rain Ordnance Model:Billet Rifle Action:Semi-automatic Type:AR Caliber:223 Remington Caliber:556NATO Barrel Length:16" Color:Tan Grips:Polymer Capacity:30Rd Finish:Cerakote Stock:MFT Minimalist Stock MPN#: BRO-20110903 UPC#: 681565227615

The XT3 is a durable gun with very high-quality components, including a precisely milled action bar with weldless design, a ratcheting barrel lock ring, and a solid, dual-ring gas piston. Fed by a detachable, bottom-feeding magazine, the XT3 also is a fast-cycling semi auto. This model ships in a hard case with sling, two five-shell magazines, and three mobile choke tubes. Each magazine includes a restrictor that may be installed to limit the magazine capacity to two shells. MPN#: XT3T28 UPC#: 812052023094

EAA GiRSAN Regard MC 9mm Luger Semi Auto Pistol 4.9" 18 RDs Features: When the US Military adopted the Beretta 92 and designated it as the M9 turning it into the primary side arm for the US Military Girsan thought they could improve on the design. In doing so the GiRSAN Regard has been the preferred side arm of Turkish Military and Law Enforcement officials for many years. The Regard is a NATO approved sidearm and is so good that the VP of EAA uses this pistol as his everyday carry sidearm.

Cobra III Field Features The Cobra III Field is a 3" Pump action shotgun that allows you to shoot light target loads to heavy waterfowl loads. It features a removable choke system that uses Beretta/Benelli Mobil Threads, includes three choke tubes (IC, M, F), choke box, and wrench. The Cobra III Field also has a highly durable injection molded stock and forearm, rubber recoil pad, swivel studs, and fiber optic sight.

Revolution Gen 4 Features The Revolution is POF's 308 that handles like a 5.56 - because it is the same size and weight as one by using a 5.56 bolt carrier and other 5.56 parts allowing for a shorter overall receiver size and reduced weight. The Revolution features many 5.56 parts; such as charging handle, bolt carrier, cam pin, buffer, heat sink barrel nut, handguard, and 5-position gas piston operating system. The barrel extension, bolt assembly, upper, and lower receiver are the exact same size as those on an AR15.

Draco NAK-9 Pistol Features The Draco NAK9 features a stamped receiver with a Picatinny optics rail, 1/2x28 threaded barrel, wood forend, and rear sling mount. It accepts Glock 17 and 19 mags and is compatibility with an AKM handguard. This model has a black finish, 11.14" barrel, and comes with one 33-round magazine.

Beretta Item Number: JAXN92005 Sub-compact Semi Automatic Handgun Striker Fired Double Action Only 9mm Luger, 9x19mm 8 Rounds 3" Barrel Low Bore Axis Easily Replaceable Sights Aggressive Slide Serrations Serialized Internal Chassis Flat Dark Earth Polymer Frame Modular Grip Frame Housing Reversible Magazine Release Black Finish Overall length 5.63" Weight 19.8 oz

FX9P4 Features Freedom Ordnance FX-9 4.5" 9mm AR style pistol uses Glock style magazines. The pistol has an enhanced extractor and bolt package. Features a Billet receiver 1" shorter than standard AR-15, 3.5" Freedom M-Lok free float handguard, handstop (designed for the FX9P4), last round bolt hold open, AR-15 style oversize Recurve charging handle and anti walk pins. This pistol is compatible with 9mm approved 1/2"x28 TPI muzzle devices and suppressors. Includes ETS 31rd Glock style magazine. Made in the USA.

Boss-25 Features Citadel's Boss-25 is a semi-auto AR style shotgun that features a synthetic stock with an adjustable comb, adjustable sights, and upper picatinny rail. This model has an American Flag cerakote finish.

M4 Carbine MPS Features This Semi-Automatic Colt Carbine is the standard by which all Modern Sporting Rifles and Law Enforcement Carbines are judged. It features a fixed A2 front sight and Magpul MBUS rear sight, a barrel with grenade launcher cutout, dual heatshield handguards, flat top upper receiver, and buttstock which define this modern classic.

MOSSBERG MC1sc 9MM FEATURES: The new MC1sc from Mossberg features a compact single stack design with a 3.4" barrel, 6 round and 7 round Clear-Count transparent magazines, front and rear slide cocking serrations, and snag-free 3-dot white sights. The MC1sc slide and button rifled six groove barrel are both constructed of 416 Stainless Steel and DLC coated for extreme durability and round count life.

100 Features The 100 SAUER raises the standard for entry-level rifles. The compelling features of the S 100 include an adjustable single-stage trigger, three-position safety, hammer-forged original SAUER barrel, a famously smooth SAUER bolt, and ERGO MAX stock with the geometry taken from the premium SAUER S 101 and S 404 models. The SAUER 100 sets a new standard for rifles in its class.

Cobra III Field Features The Cobra III Field is a 3" Pump action shotgun that allows you to shoot light target loads to heavy waterfowl loads. It features a removable choke system that uses Beretta/Benelli Mobil Threads, includes three choke tubes (IC, M, F), choke box, and wrench. The Cobra III Field also has a highly durable injection molded stock and forearm, rubber recoil pad, swivel studs, and fiber optic sight.

FN-15 Tactical II The FN 15 Tactical II is the latest evolution the FN 15 family of carbines. Improving upon the existing platform with the addition of FN’s Rail  System, enhanced MIL-SPEC lower receiver and legendary match-grade free floating, chrome-lined, cold hammer-forged barrel offer extreme durability and performance.

Cobra III Marine Features The Cobra III Marine is a 3" pump action shotgun that allows you to shoot light target loads to heavy buckshot loads. it features a return spring in the forearm. Simply pull back on the forearm and release, the spring will return the forearm forward thus closing the chamber. This makes for rapid firing in a pump shotgun. The spring can be removed and the gun will work like a traditional pump. The Cobra III Marine is also fitted with a picatinny rail located under the forearm.

TP9 Elite Combat Features The TP9 Elite Combat comes with an optics-ready slide, an Enhanced Trigger, advanced coatings on all steel and internal parts, ships with two magazines (one with an aluminum +3 extension), plus a retention holster. Every Elite Combat comes standard with performance upgrades by Salient Arms International. The TP9 Elite Combat represents a whole new generation of Canik handguns. The custom features on the TP9 Combat Elite designed by Salient Arms include- Proprietary Convex Thread Protector with 1/2x28 right hand threads, aluminum speed funnel magazine well.

Cobra III Field Features The Cobra III Field is a 3" Pump action shotgun that allows you to shoot light target loads to heavy waterfowl loads. It features a removable choke system that uses Beretta/Benelli Mobil Threads, includes three choke tubes (IC, M, F), choke box, and wrench. The Cobra III Field also has a highly durable injection molded stock and forearm, rubber recoil pad, swivel studs, and fiber optic sight.

Cobra III Field Features The Cobra III Field is a 3" Pump action shotgun that allows you to shoot light target loads to heavy waterfowl loads. It features a removable choke system that uses Beretta/Benelli Mobil Threads, includes three choke tubes (IC, M, F), choke box, and wrench. The Cobra III Field also has a highly durable injection molded stock and forearm, rubber recoil pad, swivel studs, and fiber optic sight.

VRBP-100 Shotgun Features The Rock Island Armory VRBP-100 12ga Bullpup Shotgun is new product by Rock Island Armory Imports. The VRBP-100 is a 12ga Bullpup shotgun, and has not been released to market as of yet. As we get more information we will update this product. VRBP-100 Shotgun Specifications Family: VR Series Model: VRBP-100 Shotgun Type: Shotgun Action: Semi-auto Finish: Anodized Stock: Tactical Stock Stock: Black Synthetic Weight: 7.94 Lbs. Gauge: 12 Gauge Capacity: 5 1 # Of Mags: 1 Magazine Desc: 5 Rd.

Bergara HMR Pro 6.5 PRC 26" Barrel 7 RDs Features: The HMR Pro Rifle uses the Bergara Premier Action which is designed as a two-lug system that features a separate floating bolt head to ensure contact with the lug abutments in the action. It also features a cone-shaped bolt nose for smooth feeding of the cartridge, and a spring-loaded sliding plate extractor. The one-piece bolt body is stainless steel with a pad at the rear to accept the threaded-in bolt handle.

9R Features The 9R model features an M-LOK compatible aluminum handguard and 16.2” crowned barrel. Both a push button and paddle magazine release are standard. The 4.5” precision-welded top rail enables use of your favorite optic or the traditional iron sights (included). The fixed polymer stock includes a sling attachment point.

LAR-15 X-1 Features Designed for match precision, the X-1 rifle is what you need to gain the accuracy that you are looking for. The two-tone tan and black combination provides a sleek tactical look that will impress everyone at the range.

DB9 Features Diamondback Firearms' line of DB9R rifles made entirely in the USA. It raises the bar when it comes to features and performance when compared to others. From the modified Diamondback aluminum four-rail handguard, to a variety of color and sight options, the Diamondback DB9R represents value and versatility all at a very affordable price.

Protector Carbine Features Wilson Combat's Protector Carbine rifle features Mil/Spec forged upper and lower receivers, match grade stainless barrel with Q-Comp flash hider, and a pistol-length gas system for enhanced reliability and durability with low profile gas block. It utilizes a M-LOK compatible hand-guard with a 4 accessory rail and QD sling mount, nitride coated precision BCG, M2 two-stage TTU trigger, and a Rogers super-stoc buttstock with BCM Starburst pistolgrip.

DB15 Features This DB15 Pistol features a carbine-length, medium, 4150 ChromeMoly barrel, pistol-length gas system, and a shot-peened Mil-Spec 8620 bolt carrier. It has 7075-T6 aluminum receivers, 9" M-Lok handguard, Magpul MOE grip, and a buffer tube foam pad.

856 Ultra-Lite Features Taurus' 856 is ideal on-body or off-body carry, and home defense usage. It features soft rubber grips, while the double/single action increases speed and accuracy for follow-up shots. The 856 also has serrated ramp front/fixed rear sights and a transfer bar safety.

940 JM Pro Features Designed in conjunction with World Champion shooter Jerry Miculek, the new 940 JM Pro is feature-rich, fast-cycling, and ultra-competitive. These 940 JM Pro autoloaders were built to compete and win. Inside, you will find a new durable gas system that allows for up to 1500 rounds between cleaning, nickel boron-coated internal parts for smooth operation, and a competition-level loading port, elevator, and follower.