Gun Parts
(16,251 deals total)
Filter Gun Parts
132 months ago
,
by Dealer
Contains the Ruger 10/22 stainless steel stock takedown screw, three vibration dampening rings, 1/8" hex wrench, bolt buffer, two stainless steel oversized trigger group pins, two stainless steel v-block barrel retaining screws, 5/32" hex wrench and three bonus 22LR dummy rounds. Also includes the 10/22 flanged bedding pillar and a stainless steel escutcheon!
This kit is a must if you are upgrading the stock or barrel on your factory 10/22. Will significantly improve the performance of your rifle.
- UPC:
- MPN:
Raven Eye Custom
674
132 months ago
This is a 3-pack, new in wrapper.
The PMAG 30 GEN M2 MOE is a 30 round 5.56x45 NATO (.223 Remington) AR15/M4 compatible magazine that offers a cost competitive upgrade from the aluminum USGI. It features an impact resistant polymer construction, easy to disassemble design with a flared floorplate for positive magazine extraction, resilient stainless steel spring for corrosion resistance, and an anti-tilt, self-lubricating follower for increased reliability.
Use coupon code "slick" to save 5% off a $50 order.
- UPC:
- MPN: 12036
132 months ago
$99.00
Very nice looking and high quality stock at factory direct pricing. Spend the few extra bucks over the ATI and you won't be dissapointed.
- UPC:
- MPN:
132 months ago
$1,019.99
Complete 300 AAC BLACKOUT Upper Receiver Assembly.
16" Nitrided 1:7: Twist Barrel, threaded 5/8-24
AAC 51T BLACKOUT™ Flash Hider
"Full Auto" BCG
KAC URX Rail
Ready to drop onto your AR15/M16/M4 lower!
Works with an AR lower with "Mil-Spec" push pin locations.
Use coupon code "slick" to save another $51 off this fantastic price!
- UPC:
- MPN: 12039
132 months ago
At a glance:
Increase your magazine size by 1
Better magazine seating
Installs in minutes
These work on both the the Mark II and Mark III Magazines.
Don't load less ammo, load more with the TANDEMKROSS Plus1 bumper! This finely made magazine bumper is designed to enable your factory magazines to load one extra round saving you time at the range and giving you that extra edge while trying to one up your buddies. All the while your magazines will seat better and give you that extra materal to "bump" them into a locked state. Simple installation, only takes minutes to do.
- UPC:
- MPN: MKIIIPLUS1BUMPER
132 months ago
10"-16" CHF BArrels Available.
Centurion Arms barrels are made from chrome lined, cold hammer forged (CHF) machine gun barrel blanks, and come with twice the chrome lining of standard AR-15/M-16 barrels, and tapered bores. These barrels are extremely tough, and can resist the toughest firing schedules. Because these barrels are hammer forged they have a number of special features:
-Centurion Arms CHF barrels are absolutely centered, making them ideal suppressor/silencer hosts
- UPC:
- MPN:
Weapon Outfitters
3506
132 months ago
Semi auto only
-100% Made in the USA
-Complete Bolt Assembly
-AR15 Bolt Carrier
-Shrouded Firing Pin
-Cam Pin
-Properly Staked Gas Key
-HPT Bolt (High Pressure Tested/ Proof)
-Carpenter 158 Bolt
-Exceeds MIL-SPEC for M16 carriers, drop in ready
- UPC:
- MPN:
Furguysguns.com
711
132 months ago
,
by Dealer
C & S Firearms AR15 Stripped Billet Lower Receivers. They are made for us by Sun Devil MFG.
Specs:
-CNC Machined from SOLID BILLET Aluminum
-Stronger than castings or polymer receivers
-Many areas reinforced heavier than GI spec
-Satin Black Hard Anodized
-Tension Screw – Built into Lower Receiver
- UPC:
- MPN: C & S Firearms CS1020
132 months ago
,
by Dealer
Spikes Tactical AR 15 Stripped Lower Spider Logo
Introduction
The Spike's Tactical Spider Lower is the standard lower that all ST-15 LE Rifles are assembled with, featuring the ST Spider Logo predominantly on the left side of the mag-well. The selector markings are bullet pictograms.
Lower Specs
Spike's Tactical Lower Receiver
* CNC Machined from a 7075 T6 MIL-H-6088 Forging
* Low Shelf for RDIAS
* Milled Manufacturer Engravings
* Accepts .154" Diameter Trigger & Hammer Pins
* MIL-A-8625F Type III Class 2 Hardcoat Anodized Finish inside and out
- UPC:
- MPN: STLS012
132 months ago
18" 5.56 LT Profile Rifle Length Gas System .750 Gas Block - 1x8 Twist. Polygonal 3 groove and machined finish standard. M4 feed ramp is included. ***THIS IS A STAINLESS STEEL BARREL WITH A BLACK FINISH***
Dimensions:
Under handguard: 0.78 inches
In front of gas block: 0.73 inches
Thread: 1/2x28
Weight: 1.5lbs
Model: BHW 18" Rifle Mid, Black
- UPC:
- MPN:
Fat Boy Tactical
2208
132 months ago
Here is a pretty cool idea for those considering an 80%. It is polymer and they sell the jig for $15! I realize dome people's disdain for polymer lowers but this may be an affordable experiment in finishing out an 80% receiver on the cheap.
- UPC:
- MPN:
Polymer80
19806
132 months ago
WCArmory is proud to announce a new product line to our inventory. If you haven't heard of the Toolcraft brand before, well, consider yourself informed. Toolcraft is a major supplier of OEM materials to the military and major rifle manufacturers. These BCG's have top shelf features, and if you can't tell, we consider this product the absolute best BCG we've ever offered at these price points.
- UPC:
- MPN:
132 months ago
Advantage Arms Conv Kit 22LR 4.49 Black w/Clng Kit Glk 20, 21 Generation 4 AAC20-21G4
SKU: AAC20-21G4
- UPC:
- MPN: AAC20-21G4
132 months ago
VZ58 Parts Kit, Fixed Stock with Bakelite Furniture.
Original Barrel
This kit is imported, surplus condition. All parts that you see in the picture are what you will receive. Picture is a good representation of the kits for sale.
Finish will vary from kit to kit. Does not include receiver or magazine. Kits are as is.
Item Number: VZKITFX004
- UPC:
- MPN:
132 months ago
,
by Dealer
These 80% AR-15 Lower receivers start as 7075-T6 forgings and are fully machined to mil-spec tolerances.
Fully broached mil-spec mag well For a Perfect Fit Every Time from one of the largest tactical arms machine companies in Central Florida.
Available in mill finish or black anodized.
The operations left to be completed are as follows:
fire control group
trigger pin
hammer pin
trigger slot
safety selector hole.
This is a not an FFL item. This is not a complete receiver and still requires machining to be completed.
UNRESTRICTED / NO FFL REQUIRED
- UPC:
- MPN:
GunPartsPlus.com
2103
133 months ago
$15.95
$3 Price Drop - Classic and ageless design: Non-textured, semi-gloss or matte-black, and butter smooth grips. Fantastic grips for both active shooters and collectors.
The POLYMER EXTREME (PX) series 1911 pistol grips are constructed of heat resistant, high impact, and high bending strength polymers. These grips are inspired by Ray Gorzyn who is an accomplished 1911 gunsmith with over 30+ years of experience and an active IPSC shooter. Hundreds of 1911 have been custom built and produced by Ray and are considered top of the line.
Specifications (All tests are based on JIS K6911 standard):
- UPC:
- MPN:
Amazon
2394
133 months ago
Magpul XTM Rail Panels, Flat Dark Earth
Product Features:
Low-profile, two-piece covers that attach anywhere on a 1913 Picatinny rail without having to remove previously mounted accessories
Design and construction ensures the panels will remain in place under all operating conditions, but allows for easy removal using the tips of two rounds when necessary
Set comes with (4) two-piece panels which will cover ONE side of a carbine rail
Made in USA
ASIN: B0047SAWWW
Item model number: MAG410-FDE
- UPC:
- MPN: MAG410FDE
133 months ago
Model LW-15
Light weight polymer AR-15 Lower
Complete* Lower - ready to pin onto upper and fire!!!
Lightweight – weighs in at 1.6 lbs – That’s 7.2oz lighter than a standard lower
Lightest most durable composite polymer lower on the market today
Low maintenance / easy cleaning / scratch resistant
Accepts all standard MIL SPEC uppers and lower parts
Features the accu-group composite fire control system with 4.5lb trigger pull
Can accommodate any brand MIL SPEC LPK upgrade
Reversible safety to accommodate left or right hand shooters
Also available in multiple configurations
- UPC:
- MPN: NFA-LW15BLK
133 months ago
,
by Dealer
LOWEST prices BIGGEST selection FAST shipping. iNeedMoreGear.com is your source for the gear you NEED at the price you DESERVE!!!
- UPC:
- MPN:
I Need More Gear
2877
133 months ago
,
by Dealer
AR15 80% BILLET LOWER RECEIVER
-INCLUDES ONE BILLET BlEMISHED LOWER. UNRESTRICTED / NO FFL REQUIRED
- UPC:
- MPN: ARL
133 months ago
,
by Dealer
80% BILLET LOWER RECIEVER KIT
-INCLUDES JIG, TOOLING, DIERECTIONS, AND ONE 80% 7075 LOWER. UNRESTRICTED / NO FFL REQUIRED
- UPC:
- MPN: 80ARK
133 months ago
Spike's Tactical Stripped Lower- This is the basis for any top quality rifle. Machined from a 7075 T6 Mil-Spec Forging. Mil-Spec Type III Hardcoat Black Anodized finish. Marked Multi-Cal with Pictogram Safe Semi Selector Markings
Product Code: GSTSPIKESL
- UPC:
- MPN: GSTSPIKESL
133 months ago
This is the premium quality base for those who want to build a Stoner AR-15 Rifle "from the ground up". This complete lower receiver comes assembled with a Stoner Arms lower parts kit and Mil-Spec Buffer Tube Assembly installed. All that is needed is the stock body of your choice (must be Mil-Spec diameter) and it's ready to go on the upper receiver of your choice.
- UPC:
- MPN: SAR15
133 months ago
Product Features
High Strength Polymer
Steel Shim Leg Insert
All Aluminum Side Rail Adapter
Not a Grippod
ASIN: B007LDLRNI
- UPC:
- MPN:
Amazon
2620
133 months ago
,
by Dealer
$42.99
COUPON CODE LTF10 Retail $42.99 After Coupon Code $32.99 FREE SHIPPING (OD, FDE, BLACK) Good for any color.
1) This hand guard is a 2 piece design with upper and lower heat shields for maximum cooling.
2) Designed and engineered to accommodate gas piston or direct gas impingement systems.
3) For carbine-length AR15/M16 Rifles
4) Purpose built ergonomic hand grip area with hand stop and heavy texture.
5) Proprietary formula of heat stabilized nylon reinforced with high strength fibers.
6) 1/2 the weight of aluminum hand guards
- UPC:
- MPN: ABALTFFDE
133 months ago
Get them while you can . No forward assist but need some to finish builds . Thought it was clear by title but yes need to get bolt separate
- UPC:
- MPN: JPBC-3
133 months ago
$3 Price Drop - The dimple pattern gives you consistent and an even grip.These grips are truly a joy to hold. The POLYMER EXTREME (PX) series 1911 pistol grips are constructed of heat resistant, high impact, and high bending strength polymers. These grips are inspired by Ray Gorzyn who is an accomplished 1911 gunsmith with over 30+ years of experience and an active IPSC shooter. Hundreds of 1911 have been custom built and produced by Ray and are considered top of the line.
Specifications (All tests are based on JIS K6911 standard):
Thickness: 0.295" (0.749cm)
Density: 1.42
- UPC:
- MPN:
Amazon
3279
133 months ago
Get back into action quickly with a spare magazine at your fingertips. The magazine sports a durable, black phosphate finish and holds 20 rounds of .308 ammunition. Fits DPMS LR-308 and similar platforms, including SR-25 and CMMG rifles.
Item: IK-230812
- UPC:
- MPN:
Cabela's
2872
133 months ago
,
by Dealer
AR15 / M16 Match Grade 5.56 Bolt Carrier Assembly (Nickel Boron)
Specs:
•
Bolt:
9310 steel, MPI tested, case-hardened, nickel-boron coated
Carrier:
Mil-Spec 8620 steel, staked with original Colt Mil-Spec screws, heat-treated,
nickel-boron coated, full-auto rated
Gas
key:
Original Colt Mil-Spec screws, staked, nickel-boron coated
Extractor:
Heat-treated, dual nested extractor springs exceeding Mil-Spec
Cam pin:
Heat-treated, nickel-boron coated
Info on Nickel Boron:
68 Rockwell C is 40% more wear resistant than chrome plating, with an ultra-low
- UPC:
- MPN: 123456789
133 months ago
Rubber City Armory Bolt Carrier Group Drop In Ready
Includes:
Complete Bolt
Machined from Carpenter 158 Steel
Shot peened
Batch MPI inspected
Retaining Pin
Carrier with Staked Gas Key
Machined from 8620 Steel
Firing Pin
Cam Pin
BLACKNITRIDE℠ Processing:
Reduces the need for oils and
greases – making it optimal for
operation in arid environments.
- UPC:
- MPN:
Rubber City Armory
1752
133 months ago
This high quality 304 stainelss steel bushing is made for high duty cycle shooting and replaces the Ruger factory bushing allowing you to safely remove the Magazine Disconnect from the firearm. There are instructions on the internet showing the use of washers and other parts. This is unreliable and unsafe! Use an actual part that is designed for the job. This lets the hammer move properly and at the correct speed. You will be pleased with the fit and final result with this bushing. If you know how to clean this gun you can easily remove the disconnect.
- UPC:
- MPN:
Tandemkross
3624
133 months ago
Very nice billet receiver in stock. Just got notification these were back in stock, don't know how many they have but they probably won't last long.
Mega Arms SBU Billet Upper, W/O Side Charging Handle Slot
Features a stout octagonal shaped profile for increased strength, weight, and stress resistance.
Works great in long barrel applications.
Machined from billet 7075-T6 aluminum vs. the more commonly used 6061 for a 70% increase in strength.
Black Hard anodized with a surface hardness of 60 Rockwell.
Finished in Black.
- UPC:
- MPN:
Stone Fire Arms
6049
133 months ago
Springfield® XD - 40 20 - rd. Mag - High-capacity replacement Mags by ProMag® for your XD Springfield®. Heat-treated steel matches the original factory excellence. Black finish.
Stock No. WX2-106842
- UPC:
- MPN:
133 months ago
Only a few instock
BOLT – Case hardened, shot peened, magnetic particle inspected, Carpenter 158
CARRIER – 8620 heat treated and case hardened
GAS KEY – Attached with Grade 8 fasteners and staked per milspec
NIB-X – Nickel Boron coating on all components. High hardness (RC=70) and lubricity (CoF=.07)
U.S. MADE – All components manufactured by U.S. suppliers to the military/industrial complex
Comes with a limited lifetime warranty from WMD.
- UPC:
- MPN:
133 months ago
Designed for competitive shooters or any one that may need to shoot from transitional Right/Left hand positions. The Universal allows easy access to the charging handle from both sides of the rifle. Mil Spec charging handle. Mil Spec black anodized aluminum.
- UPC:
- MPN: 24938
133 months ago
This DPMS bolt is machined, heat treated Carpenter 158 Steel.
749-009-451WS
DPMS AR-15 Chrome Bolt (Bolt Only)
Mfr Part: BTC1A
- UPC:
- MPN:
133 months ago
Magpul Gen M2 PMags (30 round capacity magazines) $12.95 each plus $5 FLAT RATE SHIPPING! BUY 1, or buy 20 and still pay $5 shipping! What a great deal, only months after people were paying $60 each for these. Get 'em now before Feinstein gets another hot flash!!
- UPC:
- MPN:
Otto Firearms
1777
133 months ago
,
by Dealer
Del-Ton AR15 Lower Receivers $99.95 - In-Stock & Shipping - See Facebook Exclusive Coupon Code below!
$5.99 Flat Rate Shipping regardless of quantity!
Use code below for $20 OFF!!!
Facebook Coupon Code: DTIFACE
Link to Order: http://www.atomictactical.com/Del-Ton-AR15-Lower-Receiver-Stripped-p/dtilr556.htm
- UPC:
- MPN:
Atomic Tactical
3535
133 months ago
Free American Flag magwell engraving for Memorial day, and free Shipping. The GEN2 UHP-15 Lower receiver with engraving is the perfect way to start your personalized Rifle build. You may choose from one of the standard engraving options or have us laser engrave your SBR or Trust information on the receiver. SBR or Trust information is engraved to the .003 depth required by the ATF. SBR or Trust information can be engraved on the bottom of the trigger guard or on the right side of the receiver above the trigger pin hole.
- UPC:
- MPN: UHP15
133 months ago
FDE and OD Green
The Billet Charging Handle Is Manufactured from a solid piece of 100% 6061-T6 Billet aluminum, allowing it to be held to extremely consistent tolerances and maintain an exceptional level of strength. Cerakote Finish.
If for any reason you are not 100% satisfied, return for a full refund. Lifetime, No questions asked, No BS Guarantee
- UPC:
- MPN:
133 months ago
$149.99
.223/5.56
Mil-spec Carpenter158® steel bolt
M16 Chrome Lined 8620 Steel Carrier
Gas Key Hardened to USGI Specs
Gas Key Grade 8 Hardened Fasteners
Mil-spec Staked Gas Key
Tool Steel Extractor Upgrade
Extractor Spring
M16 Profile
Includes the Bolt, Cam Pin, Firing Pin, & Retaining Pin
Shot Peened
- UPC:
- MPN:
133 months ago
Extra magazine for your Smith & Wesson MP15 .22 LR, direct from the manufacturer. Built to the exact specifications of your gun's manufacturer, these are identical to the magazine you receive with new firearms. Per 3.
Magazine for S&W MP15 .22 LR semiautomatics
Direct from the manufacturer
Built to exacting specifications
Reliable performance
Item: IK-230384
- UPC:
- MPN:
Cabela's
3847
133 months ago
Not the cheapest but in stock
.223/5.56 Bolt Carrier Group
Magnetic Particle Inspected Bolt (MPI)
Mil-spec Carpenter158® steel bolt
M16 Chrome Lined 8620 Steel Carrier
Chrome Lined Gas Key
Gas Key Hardened to USGI Specs
Gas Key Grade 8 Hardened Fasteners
Mil-spec Staked Gas Key
Tool Steel Extractor Upgrade
Extractor Spring
M16 Profile
Includes the Bolt, Cam Pin, Firing Pin, & Retaining Pin
Shot Peened
- UPC:
- MPN:
Core15 Rifle Systems
1132
133 months ago
Black Rain Ordnance (BRO) Milled Billet Gen 2 upper & lower receivers, Biohazard logo, Model: Fallout15, solid winter trigger guard, flared magazine well, battle grooves, Mil-spec, stamped multi-cal, pictograph for: fire, safe and full auto, hard coat grade III anodizing. M4 feed ramps, "Blacked out" t-markings. Made to withstand the worst of conditions. Unsurpassed craftsmanship.
Sets Include: Black Rain stripped lower receiver, Black Rain stripped upper receiver.
Product Code: BROBLST
- UPC:
- MPN: BROBLST
133 months ago
Hard to find 315 pieces roll pin assortment in SAE sizes
Comes with a convenience storage case
Perfect for professionals, DIYers, and more
10pc 5/32" Dia., 5/8"-1"
10pc 5/32" Dia., 1-1/2"
10pc 5/64" Dia., 1/4"-1/2"-1"
10pc 1/16" Dia., 3/16"-3/4"-5/16"
10pc 3/32" Dia., 5/8"-1"-1-1/4"
15pc 1/8" Dia., 5/8"-1"-1"-1-1/4"
10pc 1/4" Dia., 5/8"- 1-1/4"-1-3/4"
10pc 5/16" Dia., 3/4"-1-1/2"-2"
5pc 3/8" Dia., 3/4"-1-1/2"
10pc 7/32" Dia., 5/8"-1-1/4"-1-3/4"
5pc 3/8" Dia., 2"
15pc 3/16"Dia., 5/8"-1"-1-1/4"
Brand Name Neiko
Mfr Part # FK138516
ASIN: B001FS7ZIG
- UPC:
- MPN: FK138516
133 months ago
SPECIAL!! FREE UPS GROUND SHIPPING TO ALL RETAIL CUSTOMERS IN THE LOWER 48 STATES ON ORDERS OVER $250. Offer expires 05/31/13.
Bolt Carier Group
Assembled Bold Carrier Group for M16/AR15
Bolt made of Carpenter No. 158 steel
Bolt carrier made of 8620 steel
Magnetic Particle Inspected and marked 'MPI'
Hard chrome lined carrier with phosphate finish
Chrome Lined Gas Key
Shrouded firing pin
Excellent quality
Made in USA
Item # MIBCG
- UPC:
- MPN:
133 months ago
AR15 and 308AR/LR-308 Lower Parts Kits
Available with the CMMG 2 Stage Trigger
Includes everything needed to complete a lower receiver minus the stock assembly
Conveniently packaged in sub-groups, for easy location of parts during assembly
Kits Include:
Takedown pin, receiver pivot pin, takedown pin detent (2) and takedown pin detent spring (2)
Bolt catch, bolt catch plunger, bolt catch spring pin, bolt catch spring, buffer retainer and buffer retainer spring
Hammer & trigger pin (2), disconnector, hammer & spring and trigger & spring
- UPC: 852005002080
- MPN: 55CA6C5
133 months ago
Item Number: 96253
Ruger MINI-14MAG 20RND 223
Made of Blued Steel, the RUGER Mini-14 Magazine, 223 Rem, 20 Rd, Steel Blued (90010) is absolutely flawless. Performing perfectly every time, the magazine can hold 20 rounds. It is the best choice when outfitting your Ruger Mini-14 rifles.
SPECIFICATIONS
- Factory original magazine from Ruger
- Steel construction
- Blued Finish
- UPC: 736676900107
- MPN: 90010
134 months ago
At a glance:
Increase your magazine size by 1
Better magazine seating
Installs in minutes
These work on both the the Mark II and Mark III 22/45 Magazines.
Don't load less ammo, load more with the TANDEMKROSS Plus1 bumper! This finely made magazine bumper is designed to enable your factory magazines to load one extra round saving you time at the range and giving you that extra edge while trying to one up your buddies. All the while your magazines will seat better and give you that extra materal to "bump" them into a locked state. Simple installation, only takes minutes to do.
- UPC:
- MPN:
Tandemkross
1123
134 months ago
,
by Dealer
Enter Slick Guns at Checkout for $5.00 OFF. Our Semi Auto AR-15 Profile BCG's include the Bolt, Cam Pin, Firing Pin & Retaining Pin. The AR-15 Carrier is constructed from 8620 Steel and is Chrome Lined. The unit includes a batch tested Mil-Spec MPI Bolt constructed from Carpenter 158 Steel (Some Bolts May or May Not Have Markings). Our chrome lined gas key is hardened to USGI Specs and is secured with Grade 8 hardened fasteners which are staked to prevent loosening.
.223/5.56
Batch Tested Magnetic Particle Inspected Bolt (MPI)
Mil-spec Carpenter158® steel bolt
- UPC:
- MPN: HTBCG
134 months ago
,
by Dealer
I just bought one of these. Very fast shipping. Very high quality. Talk with Ronna (662-781-4633). I ordered it on Thursday and got it on Saturday. The rear of the BCG has much more mass than many of the BCGs that I have seen. http://www.youtube.com/watch?v=vjq4uDLTsbY The gas tube is staked like the newer Bushmaster BCGs.
Mil-Spec MPI tested, 9310 bolt, D2 tool steel extractor, 8620 cam pin, 8620 carrier, 416 stainless firing pin, grade 8 gas key bolts, nano ceramic lined gas key and carrier.
- UPC:
- MPN:
134 months ago
The ones posted from Midway and Brownnells are $10 higher. Five dollar shipping. I hope this is a Slick deal, if not try to take it easy on me.
- UPC:
- MPN: 9SMG32S
134 months ago
,
by Dealer
12 PMAG limit - Magpul Original Equipment (MOE) is a line of firearm accessories designed to provide a high-quality, economical alternative to standard weapon parts. The MOE line distinguishes itself with a simplified feature set, but maintains Magpul engineering and material quality. The PMAG 30 AR/M4 GEN M2 MOE is a 30-round 5.56x45 NATO (.223 Remington) AR15/M4 compatible magazine that offers a cost competitive upgrade from the aluminum USGI.
- UPC:
- MPN: MAG571
134 months ago
AR-15 .22 Conversion 26-Round Magazine
Mfr Part: 22AFC25
100-004-635WB
- UPC:
- MPN: 22AFC25
134 months ago
Tactical Ergonomic Foregrip with Pressure Switch Area & Battery Compartment. The Front Grip is 5.4 inches in height from the base, the side profile is 1.8 inches wide near the base, 1.4 inches at the thickest dimension, and weighs 6 ounces. This is an excellent choice for those mounting tactical lasers or lights.
Fits hand guards equipped with a Weaver or Picatinny rail system. Non-slip Features
Battery Compartment (AA Batteries 2 each or 123A 3 each)
Pressure Switch Housing both Right & Left sides
Moulded from reinforced plastic composite.
- UPC:
- MPN: COFG001
134 months ago
Description
The ALG Defense ALG Combat Trigger (ACT) is designed for those shooters where tradition, value and regulatory concerns are of primary importance. The pull of the ACT is very similar to a standard mil-spec trigger, however it is sharper and the grittiness of the stock trigger pull has been removed while the traditional reliability of a stock trigger remains. The pull weight is not lower than the M4/M16 minimum weight specification of 5.5lbs.
*** Tuned by Geissele Automatics ***
Performance Advantages for the Shooter
- UPC:
- MPN:
Stone Fire Arms
1101
134 months ago
AR-Stoner Magazine AR-15 6.8mm Remington SPC 10-Round Straight Body with Anti Tilt Follower Stainless Steel Black. The new and improved AR-Stoner magazine for the 6.8 SPC features a stronger stainless steel body for longer service life than the typical standard aluminum bodied magazine. The enhanced 4-way anti-tilt follower and chrome silicon spring provide reliable feeding even after extended storage and use. Made in the USA to military specifications, the AR-Stoner magazine can be counted on at the range or in the field.
Technical Information:
Caliber: 6.8 SPC
- UPC:
- MPN: Stoner6810ss
134 months ago
***Backorders will be filled around June 11th.....don't shoot the messenger.
While some consider high pressure proof round firing and subsequent magnetic particle inspection to be archaic, the truth remains that US military rifles have their bolts undergo this strenuous test to absolutely ensure durability in the field.
Lewis Machine and Tool (LMT) is one of the few manufacturers that does HP/MPI testing one all their bolts and bolt carrier groups, and sells these premium components to civilians.
- UPC:
- MPN: L7D3
134 months ago
,
by Dealer
Pro Mag AR-15 / M16 30 Round Black Polymer Magazine. Lifetime Warranty.
- UPC: 708279009631
- MPN: COL-A18
134 months ago
Manufacturer Mecgar
SKU GAG_MCP22618AFC
Condition New in Box
Caliber 9MM
UPC 765595515000
Manufacturer Part Number MGP22618AFC
- UPC: 765595515000
- MPN: MGP22618AFC