AR15 Rifle Deals, AR15 Rifle Parts, AR Rifle Kits, AR15 Lowers and Upper Receivers

(11,156 deals total)

Description The Microbest Bolt Carrier Group is a great choice for any build. This drop-in AR-15 BCG features a corrosion resistant hard chrome finish, MIL-SPEC dimensions, and a magnetic particle inspected carpenter 158 steel bolt. Crafted from domestically sourced 8620 steel, the M16 cut carrier includes a gas key fastened by properly staked grade 8 screws. Made in the U.S.A. Features: - .233/5.56 NATO - Hard chrome finish - M16 cut - Aircraft quality 8620 steel carrier - 4130 steel gas key - Properly staked grade 8 gas key screws - Carpenter 158 steel bolt

The Sons of Liberty Gun Works Competition Trigger is built to the same reliable standards as the Fighting Trigger but comes with an enhanced spring pack to customize the pull weight. The Liberty Competition trigger can be set at either 5.25 or 4.5 pounds and features a Nickel PTFE coating to reduce friction and maintain lubricity. With the included slave pin, this two-piece trigger is easy to install in your lower receiver. The trigger and hammer pin diameters are Mil-Spec .154” for maximum compatibility with most AR-15 rifles.

152-000-161WB WARDEN BLAST DIFFUSER, BLACK Mfr Part: WARDEN-BK Caliber: 22 Caliber (.223-.224), 30 Caliber (.308) Effectively Redirects Concussive Muzzle Blast

SKU 51655140294B Brand Palmetto State Armory DETAILS Barrel Length: 16” Barrel Material: 4150V Chrome Moly Vanadium Steel Barrel Finish: Nitride Barrel Profile: A2 Style Chamber: 5.56 NATO Twist Rate: 1 in 7” Extension: M4 Gas System: Mid-Length Gas Block Type: Low Profile .750” Diameter Upper Receiver: Forged 7075 T6 Aluminum Receiver Style: M4 Flat top with feed ramps Receiver Finish: Hardcoat Anodized Forward Assist: Yes Dust Cover: Yes Muzzle Device: Enhanced Muzzle Break, Red Handguard Style: Lead Star Ravage 15" MLOK Handguard, Red Bolt Steel: Carpenter 158

This Bear Creek Arsenal AR-15 5.56 NATO Complete Pistol has a 7.5" m4 barrel with a parkerized finish, and features a 1:7 twist, with a pistol-length gas system. This 5.56 NATO AR-15 includes a 6.5" MLOK rail, a forged upper receiver, a BCA AR15 Bolt Carrier Group, Flash Hider, rear charging handle, and mil-spec forged AR-15 multicaliber lower. More Information SKU CP621N-556PM47.517P-7M3 Weight (lbs) 4.700000 Magazine Capacity N/A Length 7.5 Profile M4 Contour Twist 1:7 Finish Parkerized Material 4150 Chrome Moly Vanadium Thread Pitch 1/2 x 28 Caliber 5.56 NATO

Description Specs A Fully Ambidextrous 9mm Lower Receiver For You Lefties Whether or not you're looking for a dedicated left-hand pistol-caliber carbine or just want a gun you can use effectively and fully either left- or right-handed in any scenario, this KE Arms KE-9 Stripped Lower Receiver is set up exactly the way you need it to be. That's because this lower receiver isn't actually stripped, per se. It comes with a complete ambidextrous magazine catch assembly, so you can have this gun both ways.

Buttstock Fit : Rifle Make Model Fit : AR-15.Universal Kit : Full Quantity : 1 Brownells sku: 452000210 MPN#: JPSCS2-15K UPC#: 812872024011

UPC#: 853810006447 BRL-16-BN-SPRL-223 BBLSPRL223 AR15 BARREL 223 WYLDE 16IN BLACK SPIRAL FLUTED 1/8 F1 FIREARMS F1 Firearms: We use our own state of the art barrel cell to provide high end buttoned 416RSS Blanks. We QA/QC throughout the entire barrel making process, air-guaging and drift guaging using 10" drift pins testing to a tenth of a thousandth on tolerance. Our barrels are sub MOA and are match grade .416 twice stress relieved steel, 5R rifling - button pulled, carbine-length gas barrel, 1/2-28 threads, 1-8 twist, .750 in gas block diameter.

UPC#: 853810006454 BRL16SPRL223 SKU: BBL16SPRL223W AR15 BARREL 223 WYLDE 16IN STS SPIRAL FLUTED 1/8 F1 FIREARMS F1 Firearms: We use our own state of the art barrel cell to provide high end buttoned 416RSS Blanks. We QA/QC throughout the entire barrel making process, air-guaging and drift guaging using 10" drift pins testing to a tenth of a thousandth on tolerance. Our barrels are sub MOA and are match grade .416 twice stress relieved steel, 5R rifling - button pulled, carbine-length gas barrel, 1/2-28 threads, 1-8 twist, .750 in gas block diameter.

SKU: IMI-ZMG04-10PK

SKU: U80021041

Description   - Billet Receivers are 1″ shorter than standard AR-15 - Upper and Lower receivers are billet machined aluminum Alloy - Alloy Milspec anodized finish - NEW- 3.5″ Freedom M-Lok free float handguard - 4.5″ Barrel, nitride 4150 Chromoly steel, 1:10 twist (1/2″x28 t.p.i.) - KAK Shockwave Blade Stabilizer - Fully Heat Treated/Nitride Finish:Enhanced bolt, ejector, last round bolt hold open, feed ramp, extractor and charging handle latch - NEW- Handstop (Designed specifically for the FX-9) - AR-15 Configured Last Round Bolt Hold Open

KG AR15 Carbine Lower Completion Kit ALL THE PARTS NEED TO COMPLETE YOUR STRIPPED LOWER TO EITHER 6 POSITION CARBINE OR PISTOL LOWER Set Includes 6 Position Buffer Tube MI-Spel Diameter Or Pistol Buffer Tube Set Recoil Spring 3oz Buffer Backplate Castle Nut Stock LPK Includes: Pistol Grip Trigger Hammer Disconnector Selector Bolt Catch Spring 2 Detent Spring 2 Detents Bolt Catch Buffer Take Down Detent Bolt Catch Magazine Catch Spring Bolt Catch Roll Pin Magazine Catch Button Magazine Catch Front Pivot Pin Hammer Spring Trigger Spring

SKU 5655103472 Brand Palmetto State Armory Model Number 5655103472 UPC 5655103472 DETAILS Barrel Length: 16" Gas System: Pistol-Length Barrel Profile: Heavy Barrel Steel: 4150V Chrome Moly Vanadium Barrel Finish: Phosphate Chrome Lining: None Muzzle Thread: 5/8-24 Chamber: 300 AAC Blackout Twist Rate: 1 in 8" Barrel Extension: M4 Diameter at Gas Block: .750" Gas Block Type: Low-profile Muzzle Device: A2 Flash Hider Receiver Material: Forged 7075 T6 Receiver Type: M4 Handguard Type: PSA 13" Lightweight M-Lok Rail Bolt Carrier Group Included: No Bolt Steel: N/A

Quick Overview SKU: 39313 UPC: 820103732611 MFR#: DGN556B - Caliber: 5.56X45mm / .223 - Material: Super Hard Milspec Steel - Finish: Nitride - Dimensions: L: 2.570'', DIA: .870'' - Weight: 3.2oz - Thread: 1/2-28 UNEF R/H - Serial numbered for quality control - Made in the USA. The Patent Pending Dragon is a Muzzle Brake & Compensator designed for 556X45mm / .223 Caliber AR15 style rifles with 1/2-28 UNEF Right Hand threaded muzzles.

Description The Geissele Super Dynamic 3 Gun (SD-3G) Trigger is based on the S3G Trigger. Like the S3G, the SD-3G has a shortened pull length and a lightning-quick reset to give it a unique, hybrid trigger pull that is a cross between a traditional two-stage and single-stage trigger while still retaining the safety and robustness of a two-stage combat trigger. The SD-3G’s flat trigger bow further enhances the trigger’s performance by reducing the perceived pull weight and improving the trigger’s tactile feedback to the operator making it ideally suited for 3 Gun competition shooting.

Description The Gunner profile is a blend of two of the best performing profiles of all time, Gov’t and Pencil. Proving that every once and awhile, the Government can do something right, the Gunner’s profile from the extension to the gas block mimics that well-known taper. From there, innovation takes over and the Gunner moves to a .625″ gas block journal and our famed pencil profile out front. Removing the weight from the front of the barrel ensures maximum versatility and keeps material to the rear to maximize heat resistance and mitigate whip.

Description More versatile than a Swiss army knife – and nearly as light – the RA-905 Handguard combines all the features you want in a handguard. Durable yet lightweight, it is M-LOK compatible with a Picatinny upper rail. It even boasts six quick-disconnect mounting points that span 360 degrees around the handguard for maximum customization. The slip-on handguard is simple to install, and its free-floating design helps increase accuracy. The slim center is easy and comfortable to grip for more controlled, accurate shooting. Barrel nut and hardware included. Key Features:

Description With a crazy-fast reset, nearly nonexistent over-travel, and a smoother, crisper, lighter trigger pull, the RA-535 Advanced Performance Trigger (APT) helps you fire more quickly and accurately. The single-stage trigger group is easy to install. Includes free anti-rotation pins. WHAT EXPERTS ARE SAYING “Overtravel is admirably short, making precision shooting easier.” – Joseph Von Benedikt, Guns & Ammo: Book of the AR-15 “I like its performance as much as I like its looks” – James Tarr, Shotgun News

Description The Aero Precision PRO 5.56 Bolt Carrier Group is built from the ground up to meet the demands of the most extreme conditions. Each component and manufacturing process of the PRO 5.56 Bolt Carrier Group was deliberately chosen to increase the reliable service life of the bolt carrier group and its components. Bolt

Description The Dirty Bird AR-15 Single Stage Quick Reset Drop-In Trigger is your go-to trigger in your next AR-15. Whether it be for a competition build, a range gun, or your SHTF rifle, you can rest assured that the Dirty Bird drop-in trigger will perform above and beyond the competition. Each Dirty Bird Quick Reset Trigger is made from aerospace-grade steel and aluminum, and is quality checked before shipment.

Description Here at AR15Discounts.com we work with a wide variety of machine shops and barrel manufacturers. When we come across a barrel maker we like, we will often decide to private label those barrels for resale under the NBS brand. We purchase these barrels in large quantities and then pass the savings on to our customers. Why buy an NBS Brand Barrel: - American Made – Sourced from a variety of Tier 1 Manufacturers here in the United States - Quality Control – All barrels are manufactured under ISO-9001 or better quality standards

SKU 51655115222 Brand Palmetto State Armory Model Number 51655115222 UPC 51655115222 DETAILS 7" Barrel Length 4150V Chrome Moly Vanadium barrel 5.56 NATO Chamber 1 in 7" Twist Rate Forged Upper Receiver Phosphate Barrel Finish PSA patent-pending muzzle device Magpul "MOE" SL carbine-length M-Lok handguards FEATURES

SKU 4272019 Brand Palmetto State Armory Model Number 4272019 UPC 4272019 DETAILS PSA M4A1 STRIPPED LOWER RECEIVER - Material: Made from 7075-T6 Aluminum - Finish: Black, Hardcoat Anodized - Caliber: Multi - Fire Selector: "SAFE" (Safe), "SEMI" (Fire), "AUTO" (Full-Auto)   California Buyers - stripped lowers are sent to California as "Long Guns" only.  Please make sure the business name of the FFL you will be using is on your order. FEATURES

Item Number: 148583 MPN#: PK9MM-LPK-7 TCF-PK9MM-LPK-7 The Tacfire Build Kit contains one of each- 9MM 7.5" Barrel USA Made, 9MM Bolt Carrier Group, Mil-Spec Upper Receiver USA Made, Slim Free Float MLOK Hand Guard 7", Complete Lower Parts Kit USA Made, Standard Receiver End Plate, Mil-Spec/ Commercial Castle Nut/Steel, Mil-Spec Pistol Buffer Tube/Alum. w/Foam Cover, Heavy Buffer, Buffer Tube Spring, Mil-Spec Charging Handle, Dust Cover, Forward Assist, 1/2"x36 Thread Flash Forwarder, and A2 black pistol grip For Use With: AR 9mm Luger Pistol Includes:

AR-15 Rifle Barrett Style Muzzle Brake with Jam Nut, 1/2x28 - ExtendedAR-15 Rifle Barrett Style Muzzle Brake with Jam Nut, 5/8X24 - This Extended Length "Tanker" muzzle brake has 10 large 45 degree rearward-facing side ports, redirecting pressure and drastically reducing overall recoil and stabilizing the rifle. The 10 smaller vertical ports act to reduce muzzle rise. The result is quicker realigning for more accurate follow-up shots.

This BCA AR-15 complete .223 Wylde rifle has a 18" heavy barrel with a 416R stainless finish, and features a 1:8 twist rate, with a mid-length gas system. It includes a 11.5" MLOK rail, an M4 flat-top forged upper receiver, a BCA bolt carrier group, a flash hider, a right side (Gen 2, patent pending) charging handle, and the BCA mil-spec forged AR-15 lower.  More Information SKU CR100N-SCH223WMHB1818SSFL-15M3 Weight (lbs) 7.000000 Magazine Capacity N/A Length 18 Profile Heavy Barrel Twist 1:8 Finish Stainless Material 416R Stainless Steel Thread Pitch 1/2 x 28 Caliber .223 Wylde

PSA 16" Mid-length Freedom Stainless Steel 1/7 Dissipator - Without BCG or Charging Handle 16" Barrel Length .750" Gas Block Diameter Mid-length Gas System 416 Stainless Steel Barrel 5.56mm NATO Chamber 1 in 7" Twist Rate M4 Feed ramps A2 Flash Hider 7075 Forged Upper Receiver T-Marks No BCG or Charging handle SKU: 43633

AR15 80% LOWER RECEIVER (CERRO FORGE) - SAFETY ENGRAVING OPTION - LIGHT BLEM Don't forget to select 1 of the 28 different safety markings from the drop down menu. The safety engraving reference chart can be seen under the "CHART A" tab above.

CERAKOTED 80% LOWER RECEIVER WITH FIRE / SAFE - OPTIONAL ENGRAVING ^ Grid Defense / Always Armed Matching 80% Lower 80% AR15 Lower Receiver Comes Deep Engraved with Fire / Safe markings 7075 Aluminum T6 Heat Treated Magwells are flared and broached Brass Aluminum Forging Please note: We will not ship 80% blanks to the following states: NY, NJ, D.C., CT, HI, CA, MD, WA, DE, NV, IL and RI. This is not legal advice, and we encourage you to check your local and state laws prior to ordering. Maximum Purchase: 20 units

Enhance the reliability of your bcg. Standard ar-15 / m4 / m16gas key with optimized carrier key screws from Michiguns. These specialized fasteners have extra grooves on the exterior, allowing for a better hold once the key is properly staked. Don’t want those jokers wobbling loose all Willy nilly after a bunch of rounds!

This BCA AR-15 complete 5.56 Nato rifle length upper has a 24" heavy contour barrel with a 416R stainless steel finish with straight flutes, and features a 1:8 twist rate, with a rifle length gas system. It includes the new 15" MLOK rail, an M4 flat-top billet upper receiver, a BCA bolt carrier group, a flash hider, and a right-side charging (Gen2) handle (patent protected). This 5.56 Nato upper is compatible with any mil-spec AR-15 lower. More Information SKU 8979N-UASCH556RHB2418SSF-15M3 Weight (lbs) 8.000000 Magazine Capacity N/A Barrel Length 24 Profile Heavy Barrel Twist 1:8

This Bear Creek Arsenal AR-15 Complete 5.56 Side Charging pistol upper has a 7.5" M4 barrel with a 416R stainless steel finish, and features a 1:7 twist, with a pistol length gas system. It includes the new 6.5" MLOK rail, a M4 flat-top 7075 billet aluminum upper receiver, a BCA Bolt Carrier Group, Flash Hider, and a right-side charging (Gen2) handle (patent protected). This 5.56 upper is compatible with any mil-spec AR-15 lower. More Information SKU 266N-UASCH556PM47.517SS-7M3 Weight (lbs) 3.250000 Magazine Capacity N/A Length 7.5 Profile M4 Contour Twist 1:7 Finish Stainless

This BCA AR-15 complete 5.56 Nato pistol length upper has a 7.5" M4 contour barrel with a parkerized finish, and features a 1:7 twist rate, with a pistol length gas system. It includes a 6.5" MLOK rail, an M4 flat-top upper receiver, a BCA bolt carrier group, a flash hider, and a rear charging handle. This 5.56 Nato upper is compatible with any mil-spec AR-15 lower. More Information SKU 621N-UA556PM47.517P-7M3 Weight (lbs) 3.250000 Magazine Capacity N/A Length 7.5 Profile M4 Contour Twist 1:7 Finish Parkerized Material 4150 Chrome Moly Vanadium Thread Pitch 1/2 x 28

This Bear Creek Arsenal AR-15 Complete 5.56 Side Charging pistol upper has a 7.5" M4 barrel with a parkerized finish, and features a 1:7 twist, with a pistol length gas system. It includes a 6.5" MLOK rail, a M4 flat-top 7075 billet aluminum upper receiver, a BCA Bolt Carrier Group, Flash Hider, and a right-side charging (Gen 2) handle (patent pending). This 5.56 upper is compatible with any mil-spec AR-15 lower. More Information SKU 913N-UASCH556PM47.517P-7M3 Weight (lbs) 3.250000 Magazine Capacity N/A Length 7.5 Profile M4 Contour Twist 1:7 Finish Parkerized

This BCA AR-15 complete 7.62x39 pistol length upper has a 7.5" heavy barrel with a parkerized finish, and features a 1:10 twist rate, with a pistol length gas system. It includes a 6.5" MLOK rail, an M4 flat-top billet upper receiver, a BCA bolt carrier group, a flash hider, and a right-side charging (Gen2) handle (patent protected). This 7.62x39 upper is compatible with any mil-spec AR-15 lower. More Information SKU 547N-UASCH762PHB7.5110P-7M3 Weight (lbs) 4.100000 Magazine Capacity N/A Length 7.5 Profile Heavy Barrel Twist 1:10 Finish Parkerized Material 4150 Chrome Moly Vanadium

This BCA AR-15 complete 5.56 NATO rifle length upper has a 22" heavy barrel with a 416R Stainless Steel finish with spiral flutes, and features a 1:8 twist rate, with a rifle length gas system. It includes the new 15" MLOK rail, an M4 flat-top forged upper receiver, a BCA bolt carrier group, a flash hider, and a rear charging handle. This 5.56 NATO upper is compatible with any mil-spec AR-15 lower.  SKU 8982N-UA556RHB2218SSSF-15M3 Weight (lbs) 6.100000 Magazine Capacity N/A Barrel Length 22 Profile Heavy Barrel Twist 1:8 Barrel Finish Stainless Steel Material 416R Stainless Steel

SKU 51655158116 Brand Kel-tec Model Number SUB2K9MPMDBRNZHC UPC 640832007992 DETAILS Brand: Kel-Tec Model: Sub2000 Action Type: Semi-Auto Caliber: 9mm Luger Barrel Length: 16.25" Overall Length: 30.50" Frame Finish: Midnight Bronze Cerakote Stock/Grip Material: Polymer Stock/Grip Finish: Midnight Bronze Capacity: 17 Rail Mount: Picatinny Barrel Finish: Matte Black Sights: Front Post / Rear Aperture Frame/Receiver Material: Zytel Glass Polymer Barrel Material: Alloy Steel Overall Weight: 4.25 lbs. FEATURES

BCM-MK2-RE-COSMO ***COSMETIC BLEM*** (Scratches or scuffs) Packaged in Bulk Our BCM MK2 Receiver Extension for your AR15, M16, M4. Machined from 7075T6 and manufactured to Mil-Spec dimensions and specifications. Mil-Spec receiver extensions have a slightly smaller dimension where the stock slides on. Hard Coat Anodized per Mil-A-8625F, Type III, Class 2 These tubes should be used with stocks such as USGI, BCM®™, Colt, LMT, SOPMOD, VLTOR, Stag Arms, and others that a made to the Mil-Spec size. THESE RECEIVER EXTENSIONS CAN ALSO BE USED ON MOST AR-10s.

BCM-GFC-MOD-0-556-COSMO DESCRIPTION ***COSMETIC BLEM*** (Scratches or scuffs) Packaged in Bulk Designed to reduce muzzle rise, noise, and lateral pressure. The BCM®™ Compensator Mod 0-5.56 Tuned slots and interior cone offer recoil mitigation and compensation of muzzle-rise. Designed to have less side blast and noise associated with typical compensators. Nitride treated for maximum corrosion resistance Includes a Crush Washer Should be installed by a qualified armorer. Threaded 1/2 x 28 for 5.56mm AR15 platforms. Not a flash hider Please note:

bcm-gtg-mod-0-fg The BCM®™ Trigger Guard AR-15 Type Series Trigger Guard, Mod 0 Ergonomically correct shape and contour No sharp edges, which enhances shooter s comfort Compatible with duck-billed grips Made of impact resistant polymer Like all BCM® products- Made in the USA Includes set screw and roll pin * Professional installation by a qualified gunsmith is required

COSMO-BCM-MK2-URG-MID-14-MCMR-13 COSMETIC BLEM UPPER RECEIVER GROUP. Please no returns due to cosmetic blemishes. *Cosmetic blemishes do not affect fit or functionality of the upper group. All BCM upper groups are head spaced and test fired for functionality prior to being offered for sale. All BCM® Upper Receiver Groups with a MCMR Handguard Include: One 3" Picatinny Rail Section One BCM MCMR Sling Mount Manufactured by Bravo Company MFG, Inc. (BCM)

THIS IS NOT A BCM PRODUCT (and does NOT go thru the BCM QC process). Quantities are limited. We aquired this as a surplus commerical spec AR15 Lower Parts Kit. A good option for a training or sporting rifle. Packed in bulk in a poly bag.

The KAG is the end result of collaboration between BCM® and Travis Haley, founder of Haley Strategic Partners and inventor of multiple weapons manipulation enhancements in the firearms industry.

Commercial-FIRING-PIN-AR15 THIS IS NOT A BCM PRODUCT (and does NOT go thru the BCM QC process). Quantities are limited.

BCM-GTG-MOD-0-BLK The BCM®™ Trigger Guard AR-15 Type Series Trigger Guard, Mod 0 Ergonomically correct shape and contour No sharp edges, which enhances shooter s comfort Compatible with duck-billed grips Made of impact resistant polymer Like all BCM® products- Made in the USA Includes set screw and roll pin * Professional installation by a qualified gunsmith is required

BCM-GTG-MOD-0-WG The BCM®™ Trigger Guard AR-15 Type Series Trigger Guard, Mod 0 Ergonomically correct shape and contour No sharp edges, which enhances shooter's comfort Compatible with "duck-billed" grips Made of impact resistant polymer Like all BCM® products- Made in the USA Includes set screw and roll pin * Professional installation by a qualified gunsmith is required

BCM-LGB-625-COSMO ***COSMETIC BLEM*** (Scratches or scuffs) Packaged in Bulk BCM® Low Profile Gas Block for AR15, M16, M4, M4A1. Machined of steel, phosphate finish, for .625 barrels. Manufactured within very tight Mil-Spec tolerances on all ID's. Barrel ID honed after finish per USGI TDP. Made by Bravo Company MFG, Inc. with set screw mounting. Set Screws are Steel 10-32 x 3/16 Knurled Cup Point

BCM-MCMR-SM-COSMO ***COSMETIC BLEM*** (Scratches or scuffs) Packaged in bulk. BCMGUNFIGHTER™ MCMR-SM Quick Detachable Sling Mount, (M-LOK® Compatible*) Low-Profile for increased mobility and decreased "snag" factor Compatible with M-LOK mounting system Fits standard push button, quick detach sling swivel (not included) 8-position (360°), non-rotational locking interface All steel construction Quick detach sling swivel not included. * M-LOK® is a registered trademark of Magpul Industries Corp.

This BCA AR-15 complete 7.62x39 rifle length upper has a 18" heavy barrel with a parkerized finish, and features a 1:10 twist rate, with a mid-length gas system. It includes the new 15" MLOK rail, an M4 flat-top billet upper receiver, a BCA bolt carrier group, a flash hider, and a side charging handle (Gen 2, patent pending) and rear charge handle. This 7.62x39 upper is compatible with any mil-spec AR-15 lower. More Information SKU 9688N-UADCH762MHB18110P-15M3 Weight (lbs) 6.500000 Magazine Capacity N/A Barrel Length 18 Profile Heavy Barrel Twist 1:10 Barrel Finish Parkerized

A Classic Firearms Exclusive - And one heck of an AR-15 magazine.... This magazine was built exclusively to our specifications, and we are super proud to be able to introduce them to the market. We call it an enhanced magazine due to all of the enhanced features. This Classic Firearms AR-15 magazine is constructed of advanced polymer materials and features a 4-way anti-tilt follower, and a heavy-duty industry-leading spring to insure sure-fire feeding in even the toughest of conditions.

Plum Crazy AR-15 Improved Gen II Complete Lower Receiver with Buffer Tube and Collapsible Stock - Black - What a deal. These high quality complete AR-15 lowers by PlumCrazy are ready to accept the upper of your choice. Just push 2 pins, slap in your favorite magazine, and Rock and Roll. we have both used and sold these extensively now and they perform great. Lightweight, affordable and tough as nails. You can pay much more for a complete lower but these will function as well as any of them.

***COSMETIC BLEM*** (Scratches or scuffs) Packaged in bulk. A Charging Handle for the 21st Century Gun Fighter A NEW Charging Handle and Extended Latch System Charging Handle forged from 7075 T6 Aluminum Hard Coat Anodized per Mil-A-8625F, Type III, Class 2 GFH - Mod 3B (large latch) and Mod 4B (medium latch) The Mod 3X3 latches extend past the main body of the charging handle by approximately 1.14". The Mod 4x4 latches extend past the main body of the charging handle by approximately .91".

***COSMETIC BLEM*** (Scratches or scuffs) Packaged in bulk. The BCM®™'s Grip (GFG) features Reduced angle for improved ergonomics and trigger control Hinged trap door offering storage inside the grip with a water resistant rubber gasket Each grip features an extended forward tang to close the gap between the trigger guard and pistol grip, and a high rise "beavertail" style back strap. Up to a quarter of an inch wider than the BCM® Mod 0 and Mod 1 grips. Made in the USA and manufactured from high quality impact resistant polymers.

COSMO-BCM-URG-MID-14-MCMR-13 About the BCM® Standard 14.5" Mid Length Complete Upper Receiver w/ MCMR-13 Handguard All BCM® Upper Receiver Groups with a MCMR Handguard Include: One 3" Picatinny Rail Section One BCM MCMR Sling Mount Manufactured by Bravo Company MFG, Inc. (BCM) These Barreled Upper Receiver Groups are designed for shooting professionals and responsible civilians with the Mil-Spec features for the demands of their duty. They are fully assembled, headspaced, and test fired.

Material: 7075-T6 Aluminum Forgings Anodize: Type III Hardcoat Pocket: M16/Auto Weight: 8.3oz Model: CM4 Caliber: Multi Cal Design: MIL-Spec

PSA AR-15 20" 5.56 NATO Classic A2 Rifle - 7781739 SKU: 7781739 UPC: 7781739 MFR#: 7781739 Barrel Length: 20" Gas System: Rifle-length Barrel Profile: A2 Style Barrel Steel: 4150V Chrome Moly Vanadium Barrel Finish: Melonite Chrome Lining: None Muzzle Thread: 1/2-28 Chamber: 5.56 NATO Twist Rate: 1 in 7" Barrel Extension: M4 Diameter at Gas Block: .750" Gas Block Type: F-marked FSB Muzzle Device: A2 Style Receiver Material: Forged 7075 T6 Receiver Type: M4 Hand guard Type: PSA classic Drop in Polymer

SKU 5655024855 Brand Palmetto State Armory Model Number 5655024855 UPC 5655024855 DETAILS Barrel Length: 16" Gas System: Carbine-Length Barrel Profile: M4 Barrel Steel: 4150V Chrome Moly Vanadium Barrel Finish: Phosphate Chrome Lining: None Muzzle Thread: 1/2-28 Chamber: 5.56 NATO Twist Rate: 1/7" Barrel Extension: M4 Diameter at Gas Block: .750" Gas Block Type: F-Marked Fron Sight Base Muzzle Device: A2 Flash Hider Receiver Material: Forged 7075 T6 Aluminum Receiver Type: M4 Handguard Type: PSA Classic Carbine Handguards, Flat Dark Earth

This BCA AR-10 complete .308 rifle length upper has a 20" parkerized Heavy barrel, and features a 1:10 twist rate, with a rifle length gas system. It includes a 15" MLOK Split Rail, an M4 flat-top billet upper receiver, a BCA AR10 bolt carrier group, a flash hider, and a right-side charging (Gen2) handle (patent protected). This .308 upper is compatible with 1st gen DPMS low profile lowers. More Information SKU 112N-UASCH308RMW20110P-15MSR Weight (lbs) 8.250000 Magazine Capacity N/A Length 20 Profile Heavy Barrel Twist 1:10 Finish Parkerized Material 4150 Chrome Moly Vanadium

This BCA AR-10 complete .308 rifle length upper has a 16" parkerized Heavy barrel, and features a 1:10 twist rate, with a mid-length gas system. It includes a 15" MLOK split rail, an M4 flat-top billet upper receiver, a BCA AR10 bolt carrier group, a flash hider, and a right-side charging (Gen2) handle (patent protected). This 308 upper is compatible with 1st gen DPMS low profile lowers. This has the new handguard. More Information SKU 114N-UASCH308MHB16110P-15MSR Weight (lbs) 6.250000 Magazine Capacity N/A Length 16 Profile Heavy Barrel Twist 1:10 Finish Parkerized

Description Back and better than ever, the JPFC-M combines the unrivaled quality of a JP trigger with the convenience of a module. This fire control module is a drop-in trigger solution for any AR-type rifle. With multiple easy-to-change trigger styles and colors, the JPFC-M is the right trigger for every shooter and every build. Each JPFC-M unit includes: - Pre-assembled fire control unit - Reversible ambidextrous safety selector with color-matched levers - JP Oversized Anti-Walk Pins - Alternate hammer spring for both competition or duty applications Features:

Rosco Manufacturing Launches BRAND NEW Upper Receivers! Rosco URGs are the culmination of the performance and synchronization of Rosco barrels and accessories. Rosco's original goal was to supply shooters with well-made barrels to improve their current platforms. Once that marker was successfully surpassed, Rosco turned its sights towards accessories and the ability to match them perfectly with its barrels to create one cohesive system built for accuracy.

SKU 5165450142 Brand Palmetto State Armory Model Number 5165450142 UPC 5165450142 DETAILS - Barrel Length: 16" - Gas System: Pistol Length - Barrel Profile: Heavy - Barrel Steel: 4150V Chrome Moly Vanadium - Barrel Finish: Nitride - Chrome Lining: None - Muzzle Thread: 5/8-24 - Chamber: 300 AAC Blackout - Twist Rate: 1 in 8" - Barrel Extension: M4 - Diameter at Gas Block: .750" - Gas Block Type: Low-profile - Muzzle Device: A2 Flash Hider - Receiver Material: Forged 7075 T6 - Receiver Type: M4

Item : MPMAG571_BLK | SKU : MAG571-BLK | Model : PMAG | UPC : 873750008264 The PMAG 30 AR/M4 GEN M2 MOE is a 30rd, 5.56x45 NATO/.223 Remington, AR15/M4 compatible magazine.It is identical in form and function to the older model PMAG except that the optional Impact/Dust Cover is now sold separately. NOTE: Not compatible with SA80 and HK416, or similar, platforms. Made in USA. Manufacturer Magpul Industries Pricing Unit EA Model PMAG UPC 873750008264 SKU MAG571-BLK Width 2.8000 Length 7.3000 Height 1.0000 Weight 0.3000 Caliber 556NATO Capacity 30 ROUNDS Color Black