Description
BCG/CH:
+ Breek Arms WARHAMMER Mod2 AR-15 Ambidextrous Charging Handle
+ RISE Armament .223/5.56 BCG, Black Nitride
Breek Arms WARHAMMER Mod2 AR-15 Ambidextrous Charging Handle
The Breek Arms WARHAMMER MOD2 ambidextrous charging handle is a simple and affordable upgrade that will substantially increase the use of your AR-15. Easily grab on either side of the handle and you can quickly charge your rifle even with large gloves with the textured grooves that are cut into the latch handles. The wide set-back latches work great for large optics. The low-profile design keeps it slim and sleek looking without sacrificing functionality. Made entirely out of 7075 aluminum for added strength and durability!
The new MOD2 design features improvements for further reducing gas blowback in the shooter's face. The relief cuts on the top and bottom of the stem are designed to help direct extra gas out the side and away from your face. And for any gas that does manage to go straight back, we increased the height of the shelf to better cover the back of the upper. These modifications help improve the shooting experience, especially when shooting suppressed!
FEATURES:
Fits all mil-spec AR-15/M16 Rifles
Perfect replacement for any factory charging handle
Latches are also 7075-T6 aluminum
Oversize ambidextrous release levers on both sides, 2.78" total width across the handles
Set-Back Latches work great for large optics
Allows for one-handed manipulation
Higher Rear Shelf and Relief Cuts to Divert Suppressor Gasses
Weighs in just under 1 ounce!
No gunsmith required
Made in America
SPECIFICATIONS:
Material: 7075-T6 aluminum
Finish: Type III hard-coat anodized
RISE Armament .223/5.56 BCG, Black Nitride
An AR-15 bolt carrier group is a piece of a firearm that houses many important parts such as the firing pin, gas key, cam pin, extractor, and bolt. With all these pieces working together the BCG can grab and feed another round out of a detachable magazine, chambers and engages the cam groove, engage with the locking lugs in the barrel, fire, and extract a spent cartridge. During the extraction of a cartridge, the BCG works to absorb the force of the explosion by expanding gas in the carrier. During this process gas is tapped off from the barrel and is sent into the cup inside of the gas key, creating an inertial force that sends the Bolt Carrier Group back into the buffer tube which helps to minimize the recoil of your gun when firing and the cycle will repeat for subsequent shots.
About this BCG: This BCG is an AR-15 compatible design, allowing use with .223 Remington, 5.56 NATO, .300 Blackout, & .350 Legend cartridges. The standard AR-15 bolt carrier is also machined from and is completed with a finish. This BCG comes with the ability to be full-auto compatible and also features forward assist notches. MPI testing has also been done to ensure that there are no structural flaws to this BCG.
Caliber Compatibility: .223 Rem, 5.56 NATO, .300 BLK, .350 Legend - This BCG is standard for the .223 Rem, 5.56 NATO, .300 Blackout, .350 LGND calibers, and is interchangeable between all 4 simultaneously. This includes .22 Nosler Chambered AR-15s and .223 Wylde rifles.
Finish: Nitride - Nitriding is a process during manufacturing that diffuses nitrogen into the steel to make a case-hardened surface for improved resistance and strength. A Nitrided BCG typically has a gloss black texture. Nitrided Bolt Carriers have increased resistance from heat, and corrosion.
Material: 9310 Alloy Steel - Bolt Head - 9310 Steel is a low alloy steel that is a mixture of nickel, chromium, and molybdenum. This steel is built to have high core hardness and high fatigue strength which make it the perfect steel to hold up in the harsh environments of the bolt head.
8620 Alloy Steel - Body - 8620 Steel is a carburized alloy steel meaning carbon was added to increase hardness of the steel. 8620 is known for its high case toughness and high core toughness. Made mostly of nickel concentrate, this steel can easily withstand the firing stress of the BCG under operation.
Forward Assist Notches: This BCG comes with forward assist notches which allow the forward assist on the upper to contact the BCG pushing it forward and locking the bolt into place. These forward assist notches can also help clear malfunctions in a speedy manner when the BCG becomes jammed.
Gas System: Direct Impingement - Direct impingement is the process of directing the gas created during the operation of a firearm through the barrel, gas block, gas tube, and eventually into the BCG again to cycle the action and prepare the firearm for another round.
Please note: If the listing says "In-Stock" it means we have all of the items in stock. Our assembled upper receivers are made to order, please check this LINK to view our most up-to-date shipping status.
Part Number: CO-83590
