Tandemkross Coupon Codes, Discounts and Deals
(250 deals total)
Filter Tandemkross Coupon Codes, Discounts and Deals
44 months ago
At a glance:
Missile wire offers longer life than factory spring
Reduces failure-to-feed issues
Replaces old, broken mag springs
Upgrade your Ruger®10/22 rotary magazines with aftermarket Ruger® 10/22 rotary magazine torsion springs from TANDEMKROSS. Every time a magazine is fully loaded it reduces the output torque of the spring by a very small amount. Over time and many cycles the reduction in torque affects the reliability of the magazine.
The new replacement rotary magazine torsion spring are wound with missile wire to prolong spring life and provide long lasting performance.
- UPC:
- MPN: K18N0376GRN1
44 months ago
At a glance:
No couplers needed; one whole complete, body housing two of your existing magazines
Clear magazine body replaces standard black opaque magazines
Lightweight, compact "doubled" 10 round magazines that fit in standard magazine pouches
- UPC:
- MPN: 1918N0105CLR1
45 months ago
At a glance:
Highly durable G10 material is impact, heat and chemical resistant for a long-lasting textured grip
Aggressively textured G10 is paired with the soft, tacky rubber-like material of our “hiveGrip” - for the ultimate control and comfort!
Hex insert is removable to allow for customization - use with or without!
You asked and we delivered!!
Just like your Ruger® MKIV™ 22/45™ TANDEMKROSS, is proud to present the "hiveBrid" G10 Grips for SW22 Victory®!!!
- UPC:
- MPN: TK23N0400
45 months ago
At a glance:
Durable - lasts shot after shot
Reactive targets - Get instant feedback even at long range
Weather resistant - Rain or shine these boards perform
Patent Pending clay holder - Never shake one free
- UPC:
- MPN: 1819N0026GRN1
46 months ago
The McFadden Machine Co. Inc. Ultimate Clip Loader will save your thumbs and load a 10 round magazine in as little as 3 seconds! Just empty a 50 round box of 22 rimfire ammunition into the hopper of the loader, insert a magazine and remove. The magazine follower is held down by the adjustable detent screw for easy, rapid, and automatically loading. This loader will make a brick of 500 rounds disappear in no time. The only thing faster is unloading the magazine, with your gun! Made in the USA!
Length: 11"
Works for the following pistol magazines:
Ruger® Mark II™ & Mark II™ 22/45™
- UPC:
- MPN: 1204N0056CLR1
46 months ago
Happy Fourth of July! TANDEMKROSS is offering 10% OFF store wide all weekend long!
- UPC:
- MPN:
Tandemkross
79
46 months ago
At a glance:
Shot-peened spring offers longer life than factory spring
Increased output force- reduces failure-to-feed issues
Replaces old, broken mag springs
Upgrade your Browning Buck Mark series magazines with aftermarket magazine springs from TANDEMKROSS. Magazine springs wear and tear over time, reducing the performance of your magazines and resulting in failure-to-feed issues. Don't let an underperforming or missing spring derail a shooting sports competition or day at the range!
- UPC:
- MPN: TK12N0356GRN1
48 months ago
At a glance:
Designed for use with red dot and other optics
Made from high quality full grain, vegetable tanned steer hide
Adjustable button straps
For use with belts up to two inches wide
Looking for a stylish, functional and durable leather holster for your Ruger® MK series pistol that will accommodate a red dot or other optic? Look no further than "SideSlinger" Leather Scoped Holster.
- UPC:
- MPN: TK19N0368MRK1
49 months ago
At a glance:
Made from the finest, hardened tool steel for extreme toughness and extended life
EDM machined and ground for high precision
TANDEMKROSS Life-Time Guarantee!
The TANDEMKROSS "Eagle's Talon" Extractor is now available for the Taurus™ TX22!
- UPC:
- MPN: TK31N0386BLK1
49 months ago
At a glance:
Shot-peened spring offers longer life than factory spring
Increased output force- reduces failure-to-feed issues
Replaces old, broken mag springs
Upgrade your SW22® Victory™ series magazines with aftermarket magazine springs from TANDEMKROSS. Magazine springs wear and tear over time, reducing the performance of your magazines and resulting in failure-to-feed issues. Don't let an underperforming or missing spring derail a shooting sports competition or day at the range!
- UPC:
- MPN: TK23N0358GRN1
50 months ago
At a glance:
Aggressively textured rubber for improved grip in any shooting condition
Patented impact and vibration dampening material
Ergonomic finger grooves for better control - ideal for speed and accuracy
The Smith & Wesson® SW22® Victory™ pistol is quickly becoming a favorite for Rimfire Challenge and Steel Challenge competitions and other shooting sports. However, the rounded factory SW22 grips can be a challenge for competitive shooters who need a better purchase on the pistol when dealing with rain, sweat or gloves.
- UPC:
- MPN: TK23N0213BLK1
50 months ago
At a glance:
Improved spring force to accommodate larger/heavier magazines
Replaces old/worn factory springs
High carbon spring steel for long lasting durability
The Ruger® 10/22® factory magazine release spring was designed to retain 10 round magazines. With the invention of the "Double Kross", the BX-25, and now the "Triple Kross", a stronger spring helps to retain the heavier magazines.
Change out your old tired magazine release springs; improve function and reliability with new magazines release springs from TANDEMKROSS!
- UPC:
- MPN: TK18N0376BLK1
51 months ago
,
by Dealer
At a glance:
Features highly visible fiber optic light tube for quick target acquisition
Made of Aluminum for long lasting durability
Matte black finish and cutting edge design to reduce light noise
Acquire your sights more quickly and improve your accuracy with this easy drop in upgrade for the Taurus™ TX-22. The upgraded fiber optic sight collects surrounding light rays to offer you superb visibility, even in low light conditions.
This sight ships with a green light pipe already installed and a red one is also included in the package for customization.
- UPC:
- MPN: TK31N0382BLK1
51 months ago
At a Glance:
Titanium is 40% lighter than steel
Helps reduce lock time for higher accuracy
Non-corrosive and highly durable
TANDEMKROSS LIFETIME guarantee
- UPC:
- MPN: TK27N02329SLV1
52 months ago
At Glance:
Mounts directly to the barrel to maintain sight adjustment
Unique design allows for use with many popular optics
High Strength aircraft grade aluminum for long lasting durability
Our popular low profile “Shadow” Mount V2 is now available for the Ruger® PC Carbine™!
- UPC:
- MPN: TK28N0378
52 months ago
Get the best of our #tandemized upgrades for the popular Ruger® PC Carbine™ in one bundle for a limited time! Save by bundling, and fully accessorize with the new TANDEMKROSS Everything Kit" for the Ruger® PC Carbine™!
This kit includes:
1x "Victory" Trigger
1x "Spartan" Charging Handle
1x "Challenger" Charging Handle
1x "Titan" Extended Magazine Release
1x Fiber Optic Front Sight
1x Receiver Kross Pins (2-pack)
1x TANDEMKROSS Glow in the Dark Velcro Patch
1x TANDEMKROSS Drawstring Bag
1x #TANDEMIZED Sticker
- UPC:
- MPN: COMBON0128
53 months ago
At a Glance:
Ergonomic, intuitive mag release
Ambidextrous
Aerospace billet aluminum for light weight and durability
Drop your magazines with ease using the TANDEMKROSS “Titan” Extended Magazine Release for the CZ Scorpion EVO!
Designed to manipulate the magazine release instinctively, with either your trigger finger or non-trigger finger, for quick magazine changes.
The skeletonized design of the “Titan” Extended Magazine Release is CNC machined from aerospace billet aluminum for light weight durability, and machined for a positive non-slip grip.
- UPC:
- MPN: TK33N0372
53 months ago
,
by Dealer
At a Glance:
Easy drop-in installation
Instinctive sight centering
Full function of rear windage and elevation controls
Improve your target acquisition with this affordable drop in upgrade!
When shooting round steel targets it is advantageous to have a round rear sight. The circular plate fills the arc of the sight to make for easy target acquisition.
- UPC:
- MPN: TK19N0343BLK1
53 months ago
The TANDEMKROSS “Sentinel” Captured Guide Rod is now available for the SW22® Victory™!
At a glance:
Simplify the takedown and reassembly of your SW22® Victory™
High quality stainless steel replacement for your two piece factory guide rod
One piece guide rod and spring assembly
Drop in replacement
Installation is easy with the one piece stainless steel guide rod assembly. The spring is captured on the guide rod can’t get lost.
- UPC:
- MPN: TK23N0348SSL1
53 months ago
At a glance:
Allows simple and automatic release of the bolt mechanism
Black Oxide finish for super tough durability
Drop in part: easy to install
The 10/22® is a legendary rifle but just like any other gun, it has its own annoyances. Releasing the bolt on a factory original Ruger® 10/22® requires the operator to manipulate the bolt lock with one hand while releasing the bolt with the other.
- UPC:
- MPN: TK18N0037BLK1
53 months ago
At glance:
- Facilitates the loading of the TAURUS™ TX22 magazine loader
- Load your magazine faster
- comes with a branded fashionable land yard for easy carry.
Eliminate the trouble loading with this simple speed loader tool for the TAURUS™ TX22. This simple gadget will easily slip over the magazine helping hold down the follower button. The tool comes with a lanyard to easily locate this in your range bag. If you are loading a lot of ammo for plinking or out for a practice session, this is a great addition that will save your thumbs!
- UPC:
- MPN: TK31N0333CLR1
54 months ago
At a glance:
TANDEMKROSS has taken the “Double Kross" 10/22® Magazine Bodies, to the next level!
Three of your existing 10/22 magazines are easily converted to one clear lightweight and compact housing
Perfect way to convert your old black magazines to clear see-through magazines
Include oversized belt loop attachment, for easy carry/access
Great for competition shooting!
The TANDEMKROSS "Triple Kross" Clear Magazine Bodies!!
- UPC:
- MPN: TK18N0362CLR1
54 months ago
At a Glance:
Titanium for a lifetime of use
Large knob for tool-less operation
Knurled Edges for added grip
Classic slotted face for using a quarter or slotted screwdriver
This accessory is a must have for any Ruger ®10/22® owner. The TANDEMKROSS Titanium takedown knob is an great upgrade and is an inexpensive addition to your 10/22® rifle. Designed with a classic look and functionality the knob is easily installed by hand power and enables a quick takedown for field cleaning.
- UPC:
- MPN: TK18N0040SSL1
54 months ago
At a Glance:
Designed to make maintenance on a Ruger® 10/22® Rotary Magazine easy
Glass Filled Nylon and Metal Allen Key
Compact for easy transport and storage - now with a TANDEMKROSS carrying case!
If you have ever tried to take apart a 10/22® Rotary magazine you know that they come apart easy, but they can be difficult to put back together.
- UPC:
- MPN: 1918N0106BAG1
55 months ago
At a glance:
Adds grip to the bottom of the Ruger® 10/22® Rotary Magazine
Helps with sticky magazine removal and insertion
Simple to install with screws providing a superior hold
*Includes two base pads per order*
These extended magazine bumpers for the Ruger® 10/22® and Ruger American Rimfire® are a must have for anyone that knows how easy it is to get a magazine stuck in the magazine well!
- UPC:
- MPN: TK18N0036BLK1
55 months ago
At a glance:
Fiber Optic sights for improved sight picture
Precision-made out of Blued Steel and Aluminum
"Click" elevation and windage adjustments
Williams Gun Sight Company STRONGLY recommends that this product is installed by a professional gunsmith
- UPC:
- MPN: 0301N0321
55 months ago
Luck favors the prepared!
Lost or broken springs, light strikes or failures to eject can put an end to your day of shooting if you do not have these important replacement parts on hand!
Don't let the unexpected end your day of shooting! Be prepared with our new Range Essentials Kit! Lost or broken springs, light strikes or failures to eject will not put an end to your day of shooting when you have these important replacement parts on hand! Don’t let this happen to you!
The TANDEMKROSS "Range Essentials Kit" replaces all your wearable, and easy to lose internals.
- UPC:
- MPN: COMBON0129
55 months ago
At a glance:
Oversized bumper improves consistency of positive magazine seating
Lateral grip pulls make pulling from magazine well easy
Zytel® based bumpers offer the ultimate strength and durability
*Includes two base pads per order.*
The Ruger® MKIV™ has quickly become a favorite rimfire pistol among competitive shooters, but the flush surface on the magazine base pads can be challenging for competitors, making it harder to consistently seat the magazine properly and causing unnecessary delays.
- UPC:
- MPN: TK24N0238BLK1
56 months ago
This (2-Pack) includes:
Upgraded pins won’t fall out when working on your rifle
A steel pin is highly durable
Spring-loaded ball detent holds pin in place securely, installs easily
If you’ve upgraded your Ruger® PC Carbine™ with aftermarket parts and taken apart your trigger housing sub-assembly, it’s likely you’ve experienced just how easily the receiver cross pins can fall out of the sub-assembly. It’s easy to lose these important pins while working on your gun - a loss that can easily derail a day at the range or even firearms competition while you wait for replacement parts.
- UPC:
- MPN: TK28N0331SSL1
56 months ago
At a glance:
Steel compensator adds weight for better balance, more accuracy
Proprietary coating makes cleaning the compensator easy
Vents gases at dual 45° angles for better visibility & control
When shooting rimfire competition, even milliseconds can mean the difference between first place and second place. And while .22lr pistols and rifles aren't known for their muzzle rise, even a small amount of muzzle rise can make moving between targets quickly and accurately a challenge.
- UPC:
- MPN: TK00N0269FLG1
56 months ago
At a Glance:
Chevron arrows indicate what direction the pistol is facing when bagged
Detachable and adjustable shoulder strap for hands free carrying
Case opens to lie flat with padded interior to protect pistol's finish
7 external magazines pouches
- UPC:
- MPN: TK00N0353BAG1
57 months ago
At a glance:
Made from titanium for long-term durability and corrosion resistance
Fits the SW22® Victory™, Ruger® MKIV 22/45™& Ruger® MKIII 22/45™grip frames
Engraved screws allow for the ultimate custom look
- UPC:
- MPN: TK19N0296SSL1
57 months ago
At a glance:
Product specs match factory spring for ideal fit
Replaces factory rebound spring
Easy, drop-in installation
As an owner of a SW22® Victory™ series pistol, it’s not uncommon to experience a broken or lost firing pin rebound spring. Stock up on replacement rebound springs and avoid the hassle of a missing or broken part when at the range or working on your gun.
- UPC:
- MPN: TK23N0257SSL1
57 months ago
At a glance:
Taller, quicker, wider magazine release button
Deep grooves improves grip
Significantly improves magazine reload time
The Ruger® PC Carbine™ is a popular choice among precision shooters, but even good guns can be made great!
Made of CNC machined 6061-T6 aluminum for long lasting durability, the “Titan” Extended Magazine Release for the Ruger® PC Carbine™ extends and increases surface area of the magazine release for easier manipulation and quicker magazine drops.
- UPC:
- MPN: TK28N0349
57 months ago
At a glance:
Product specs match factory spring for ideal fit
Replaces factory rebound spring
Easy, drop-in installation
As an owner of a Ruger® MK series pistol, it’s not uncommon to experience a broken or lost firing pin rebound spring. Stock up on replacement rebound springs and avoid the hassle of a missing or broken part when at the range or working on your gun.
- UPC:
- MPN: TK05N0171BLK1
57 months ago
At a glance:
Aggressively textured rubber for improved grip in any shooting condition
Patented impact and vibration dampening material
Ergonomic finger grooves for better control - ideal for speed and accuracy
The Ruger® MKIV™ 22/45™ pistol is quickly becoming a favorite for Rimfire Challenge and Steel Challenge competitions and other shooting sports. For a competition-ready race gun, enhanced Ruger® MKIV 22/45 grips are key.
- UPC:
- MPN: TK26N0277BLK1
57 months ago
At a glance:
Over-sized textured surface for positive magazine seating
Built in adjustments allow for custom fitting to your Buckmark
Made from durable Zytel for a lifetime of use
*Includes two base pads per order*
- UPC:
- MPN: TK12N0086BLK1
58 months ago
At a glance:
Mounts sight straight to the receiver, reducing overall height
Made of aircraft grade aluminum, replaces plastic factory rail
Mounts a C-MORE Railway or Slideride sight to the SW22® Victory™
Upgrade your SW22® Victory™ for competition and see targets more clearly with the new “Shadow” C-MORE Mount from TANDEMKROSS. The “Shadow” Mount allows the user to mount a C-MORE Railway sight or Slideride sight directly to the firearm’s receiver, without the added height of a picatinny rail and clamp.
- UPC:
- MPN: TK23N0
59 months ago
At a glance:
Flat-faced, skeletonized design for better control and feel
Textured trigger face offers a no-slip grip in any condition
100% adjustable for pre-travel and post-travel
The factory KELTEC trigger stands out in the rimfire market for its crisp feel and light trigger pull. But even good triggers can be made GREAT! The new TANDEMKROSS “Victory” Trigger for the KELTEC CP33, compatible also with the PMR30 and the CMR30 is the ultimate KELTEC upgrade - ideal for speed shooting competitors!
- UPC:
- MPN: TK08N0330
59 months ago
Get our best SW22® Victory™ upgrades for Rimfire Challenge and other speed shooting sports with the new "Race Gun" Kit for the Smith & Wesson® Victory™ pistol!
This kit includes:
1 x "halo" Charging Ring
1 x Red "Victory" Trigger for SW22® Victory™
1 x Red "Titan" Extended Magazine Release (with two button styles)
2 x "VictoryPRO" Extended Base Pads
- UPC:
- MPN: TK23N0272RED1
60 months ago
Get competition ready and turn your Browning Buck Mark pistol into a race gun with the TANDEMKROSS Race Gun Kit. This combo features our best Browning Buck Mark upgrades in one kit - saving you money compared to buying each part separately and giving you the ultimate Buck Mark upgrades in one, simple package.
This Kit includes:
1) Race Gun Kit:
1 x "Victory" Trigger for Browning Buck Mark
1 x "halo" Charging Ring for Browning Buck Mark
1 x "Titan" Extended Magazine Release
1 x "Buck PRO" Magazine Base Pads (2-pack)
- UPC:
- MPN: COMBON0120
60 months ago
Whether you're using your SW22® Victory™ series pistol for shooting sports or just some fun at the range, your shooting can be completely derailed by a lost, broken or underperforming essential internal component. Stock up on these essential parts and stop worrying about missing or broken gear, with the new Essential Maintenance Kit for SW22® Victory™!
This Kit includes:
1 x "Essential Maintenance Kit":
1 x Rebound Springs for SW22® Victory™ (5-Pack)
1 x "Eagle's Talon" Extractor
1 x "Fire Starter" Firing Pin
- UPC:
- MPN: COMBON0122
60 months ago
At a Glance
Oversized 1911-style safety ledge
Simplified safety manipulation
Improves hand placement for a better grip
Whether you’re a competitive shooter working to improve your speed and accuracy or a weekend plinker looking for better control over your pistol, a strong, proper grip is key. The "Corner Stone" Safety Thumb Ledge from TANDEMKROSS is the ideal upgrade to boost your control!
- UPC:
- MPN: TK08N0326
61 months ago
This Kit includes
1-"GearBox"
Upgraded sear spring lowers trigger pull weight by .5lbs or more!*
Installation frame houses spring for easy installation and consistent sear engagement
No need to experiment with DIY spring fixes - one simple drop-in replacement!
The Browning Buck Mark has a great trigger right out of the box. But if you’re like many Browning Buck Mark owners, you’ve likely researched ways to lower the gun’s trigger pull weight and adjust the feel even further.
- UPC:
- MPN: COMBON0116
61 months ago
Upgrade your SW22® Victory™ magazines with two simple drop-in upgrades from TANDEMKROSS - available in March 2019 only for one, low price!
This kit includes:
2 x "Maximus" Plus1 Magazine Followers
2 x "VictoryPRO" Magazine Bumpers
The SW22® Victory™ is a favorite rimfire pistol for competitive shooting sports, and with some simple drop-in SW22™ upgrades from TANDEMKROSS, your pistol can be competition ready!
- UPC:
- MPN: COMBON0070-2
61 months ago
At a glance:
Replaces stock hammer spring and plastic spacers with high quality spring and metal precision spacers
Installs in minutes
Noticeably reduces trigger pull weight to a crisp and safe 3.5 – 4.0 lbs.
Comes with colored installation instructions
Don't forget, all TANDEMKROSS products are Made in the USA and come with a LIFETIME guarantee!
- UPC:
- MPN: 2015N0048SSL1
61 months ago
A match made in heaven! The new "Victory" Trigger & "GearBox" are a revolutionary pair designed to create a crisp trigger pull with every click.
This COMBO includes:
"Victory Trigger"
"GearBox"
"Victory" Trigger
At a glance:
Flat, textured faced for better control and feel
100% adjustable for overtravel
Lightweight skeletonized design
- UPC:
- MPN: COMBON0113
61 months ago
At a glance:
Highly durable G10 material is impact, heat and chemical resistant for a long-lasting textured grip
Aggressively textured G10 is paired with the soft, tacky rubber-like material of our “hiveGrip” - for the ultimate control and comfort!
Hex insert is removable to allow for customization - use with or without!
Upgrade your Ruger® MKIV™ 22/45™ with an aggressively textured, but comfortable grip for the ultimate control and comfort!
- UPC:
- MPN: TK26N0309
62 months ago
Upgrade your SW22® Victory™ magazines with two simple drop-in upgrades from TANDEMKROSS - available in March 2019 only for one, low price!
This kit includes:
2 x "Maximus" Plus1 Magazine Followers
2 x "VictoryPRO" Magazine Bumpers
The SW22® Victory™ is a favorite rimfire pistol for competitive shooting sports, and with some simple drop-in SW22™ upgrades from TANDEMKROSS, your pistol can be competition ready!
- UPC:
- MPN: COMBON0070-2
62 months ago
This Combo Contains:
(3) TANDEMKROSS "Double Kross" 10/22® Rotary Magazine Housings
(1) 10/22® Magazine Take Down Tool with TANDEMKROSS logo storage pouch
"DoubleKross" Product Information:
At a glance:
No couplers needed; one whole complete, body housing two of your existing magazines
Turns standard black factory magazines into clear magazines
Lightweight, compact "doubled" 10 round magazines that fit in standard magazine pouches
- UPC:
- MPN: COMBON0114
62 months ago
At a glance:
Specifically designed for quick retrieval of your magazine for rapid reload
Chemical, heat, and impact resistant - Made from Zytel®
Unique Interlocking Design provides security and capability for multiple "Quick Grips"
Adjustable retention to fit a wide array of .22 Magazines - full list below.
- UPC:
- MPN: QGMPPACK-2
62 months ago
At a glance:
Provides a durable layer of protection against rust
One coat offers long-lasting rust protection!
Keep your firearm performing at its best for longer
Molecular Advantage® gun cleaning products are engineered in a laboratory to offer the ultimate firearms maintenance without any additives. The MOA Gun Conditioning Oil is designed to coat your firearms parts and the outside of your firearm to offer long-lasting protection against rust and other damage.
- UPC:
- MPN: 3800N0185OIL
62 months ago
At a glance:
Lubricant, solvent and rust prevention all in one
Dry lubricant, no more caking, no oily film
Scored an "Excellent" in the ASTM and ASTM B117
- UPC:
- MPN: 0619N0030CAN1
62 months ago
At a glance:
Plunger & spring match factory specs for ideal fit
Stainless steel plunger boosts durability
Never let a lost or broken part derail a competition or day at the range
- UPC:
- MPN: TK23N0312SSL1
63 months ago
This kit contains:
1 x "Victory" Trigger for Ruger® PC Carbine™
1 x "Game Changer PRO" 9MM Compensator for Ruger® PC Carbine™
The Ruger® PC Carbine™ is quickly gaining popularity among shooting sports competitors, especially with PCC competitions on the rise. The PC Carbine™ is a fantastic gun out of the box, but even a good gun can be made great! The limited edition Competition Combo Kit for Ruger® PC Carbine™ combines the best two PC Carbine™ accessories from TANDEMKROSS into one kit for one low price! This kit is available December 2018 only.
- UPC:
- MPN: COMBON0102
63 months ago
At a glance:
Scientifically engineered specifically for firearm performance
Withstands extreme conditions, won’t burn, smell or break down when firing your weapon
Cleans and protects all firearms parts for improved performance
Cleaning and maintenance on your firearm is important to keep your gun working at its best. But if you’re not using the best gun oil and lubricants, you may still find your gun getting dirty and damaged.
- UPC:
- MPN: 3800N0181OIL1
63 months ago
At a glance:
Upgraded sear spring lowers trigger pull weight by .5lbs or more!*
Installation frame houses spring for easy installation and consistent sear engagement
No need to experiment with DIY spring fixes - one simple drop-in replacement!
The Browning Buck Mark has a great trigger right out of the box. But if you’re like many Browning Buck Mark owners, you’ve likely researched ways to lower the gun’s trigger pull weight and adjust the feel even further.
- UPC:
- MPN: TK12N0317BLK1
63 months ago
At a glance:
Steel compensator for 9MM firearms adds weight for better balance, more accuracy
Proprietary coating makes cleaning the compensator easy
Vents gases at dual 45° angles for better visibility & control
When shooting in a competition, even milliseconds can mean the difference between first place and second place. The new “Game Changer PRO” 9MM Compensator is the perfect addition to your Ruger® PC Carbine™ or other 9MM competition firearms to significantly reduce muzzle rise and boost your speed and accuracy.
- UPC:
- MPN: TK30N0305
63 months ago
Get the best Ruger® 10/22 accessories for Rimfire Challenge, Steel Challenge and other speed shooting sports from our Rim/Edge brand in this new upgrade kit, available October 2018 only.
This kit includes:
1 x "KrossFire" CNC-Machined Bolt for Ruger® 10/22
Cross-pinned firing pin restricts vertical movement for consistent ignition
Polished bolt rides smoothly over the hammer for improved cycling and reliability
Precise CNC-machining ensures proper headspace without a need for a factory bolt rework
1 x "Spartan" Skeletonized Charging Handle for Ruger® 10/22
- UPC:
- MPN: COMBON0073
64 months ago
This kit contains:
1 x "Fire Starter" Titanium Firing Pin for Browning Buck Mark
1 x "Eagle's Talon" Extractor for Browning Buck Mark
1 x "Victory" Trigger for Browning Buck Mark
- UPC:
- MPN: COMBON0109