Gun Parts
(16,528 deals total)

Filter Gun Parts

108 months ago , by Dealer
HPT/MPI Tested Case hardened 8620 steel carrier Fully machined 4130 steel gas key and grade 8 hardware with proper staking Case hardened 4340 cam pin Shot peened, case hardened 9310, and NiB coated bolt The bolt is Mil-STD-1816 HPT and MPI tested Shot peened, case hardened 4340 steel NiB coated extractor includes a crane O-ring Mil-spec, center less ground 8740 steel, hard chrome coated firing pin Proudly made in the USA. Ships Free for $99.99
1
  • UPC:
  • MPN:
109 months ago , by Dealer
Ar 15 Upper Receiver With 7.5" Slim Rail free float 5.56 Nato- Givati Company USA Ar -15 7.5" upper receiver complete Givati Company USA Upper receiver complete half Caliber: .223 / 5.56 Nato Barrel: 4150 qpq nitride barrel 5.56 Nato Rifling Twist: Choose twist Muzzle Device: Flash Suppressor M-15 Uppers use 7075-T6 Aluminum. Upper Receiver: Forged Flattop with Picatinny Rail Finish: Hard Anodized Aluminum, Free float Handguard 7" Slim rail with 2 mini rail adapters Givati Company USA Micro low profile gas block Billet charging handle
0
109 months ago
T6 Aluminum Body Two Piece Unit User Slides Adapter Over Birdcage , Slides Shroud Over Birdcage, Then Screws Down Adapter To Add Length Designed For Sig Sauer Mpx Total Length: 6.5" Adds 4 3/4" From End Of Birdcage Flash Hider Total Weight: 11.4 Ounces
0
Amazon 1966
109 months ago , by Dealer
- GIBBZ Arms Patented Pending Left Side Charging Handle – Non-reciprocating with detent to keep the charging handle forward during operation. - Uses all Mil-Spec and most Custom Bolt Carriers without modification. - Beveled Ejection Port - Full 15 Slot Picatinny Rail - Bolt carrier door in the rear to allow for easy bolt carrier removal, but keeps dust and debris out during operation. - Compatible with Mil-Spec and most other lowers receivers - Enhanced cam-pin optimized for our side charge upper. - Charging handle dust cover
0
  • UPC:
  • MPN:
Gibbz Arms 4592
109 months ago , by Dealer
Critical Capabilities Billet AR15 Lower / Upper Receiver Set - $199.99 with free shipping http://www.shop.doasales.net/Critical-Capabilities-Billet-AR15-Lower-Upper-Receiver-Set-CCSET.htm Lower Specs •Machined from 7075-T6 aircraft grade billet aluminum •Matte black hard-coat anodized per Mil 8625 Type 3 Class 2 •Precision broached magazine well with beveled feed lips •Machined and engraved to be compatible with 45 and 60 degree short throw fire control selectors such as the BAD_ASS ST 45 Lever •Caliber marking of “Multi” so it can be used with many different caliber uppers
5
  • UPC:
  • MPN:
DOA Arms 2553
109 months ago
40% off ATI AK-47 Adjustable Side Folding Strikeforce Stock Package TAN with Scorpion Recoil System. Use Check out code: ATIAK - Six Position Adjustable Side Folding AK-47 Stock with Scorpion Recoil System, Handguards and Adjustable Cheekrest Description
0
  • UPC:
  • MPN:
109 months ago , by Dealer
AK47 Rifle Chrome Lined Barrel, New US 762 X 39 Barrel, Threaded with Gas Port, a great choice for your AK47 Kit build.
0
  • UPC:
  • MPN:
109 months ago , by Dealer
ANDERSON AR-15 Barrel: 16 ” M4 Contour Barrel with 1:8 Twist,Chambered in 5.56/.223 ,Parkerized Finish, Carbine Gas System, ANDERSON M16 5.56/.223 Complete Bolt and Carrier Group is chrome lined, made from 8620 steel, Bolt is made from 9310 steel and coated per mil spec.
0
  • UPC:
  • MPN:
109 months ago , by Dealer
Upper: 7075 Billet Aluminum, Black anodized finish, M-4 extended feed ramps Caliber: 5.56 Barrel: 7" 1/9 Twist, Chrome Moly Steel , M-4 feed ramps, Carbine Length Gas System, 1/2x28 threaded Flash Hider Option: A2 Bird Cage (standard). Troy Medieval Flash Suppressor or Smith Enterprise Vortex Flash Hider are optional. Front Site: Rail Height gas block w/ rail. Handguard: UTG Pro 4" Free Float Quad Rail Barrel Finish: Mag Phosphate BCG: Optional Full Auto BCG w/ upgraded Heavy Duty extractor spring Charging Handle: Optional Charging Handle
0
  • UPC:
  • MPN:
109 months ago
40% off ATI Ruger Mini-14/Mini-30 Strikeforce Stock in Desert Tan with CHECK OUT CODE: ATI14 Six Position Adjustable Side Folding Mini 14 Stock with Scorpion Recoil System
0
  • UPC:
  • MPN:
109 months ago
The shortest AR stock solution with an actual cheekweld. This will shave 2" off your collapsed OAL. These go on sale only 2-3 times a year, Fathers Day and Black Friday. Heres the LWRC page blurb:
0
  • UPC:
  • MPN:
109 months ago , by Dealer
The brand new SAND color Magpul mags in STOCK and ships next day. Magpul PMAG 30 GEN M3 30rd Magazines. The next-generation PMAG 30 GEN M3 is a 5.56x45 NATO (.223 Remington) polymer magazine for AR15/M4 compatible weapons. Along with expanded feature set and compatibility, the GEN M3 incorporates new material technology and manufacturing processes for enhanced strength, durability, and reliability to exceed rigorous military performance specifications.
1
  • UPC:
  • MPN:
109 months ago
Anderson M-16 Flash Hider. Tactical looks, easy flash suppression, SAVE BIG! New manufacture, ready to rock! A2 flash suppressor, designed for 5.56 / .223 cal. 1/2 x 28 threaded barrel AR-15 style rifles. Get yours here for LESS! Order Now! SKU#: WX2-423880 UPC#: 784672106825 ($13.49)
0
109 months ago , by Dealer
The Troy Industries AR-15 BattleMag is made from Troy proprietary military-grade, chemical, biological and impact-resistant polymer and extensively tested by Special Ops units for function and reliability. This magazine holds 30 rounds and comes in a black finish. Features: - Military-grade, impact-resistant polymer - Flush, bolstered floorplate - Reinforced feed lips - Anti-tilt follower Specifications: - Fits: All M4, M16/AR-15, HK416, and FN SCAR Rifles - Capacity: 30 Rounds - Color: Black
7
  • UPC:
  • MPN:
109 months ago
Reloadingbrasswarehouse is having a clearence sale on their Flat Dark Earth Color Rogers Superstocks for $22.95 and free shipping over $75 Lowest Price Ive seen them go for.
1
109 months ago
They have a custom jig and like 3 different frames with/without rails
0
  • UPC:
  • MPN:
109 months ago
30% off AP Custom Tactical Carbon-Fiber Free Float AR-15 Handguard - Carbine 7". Use check out code: AP7. Reduce the weight of your AR-15! AP free float tubes are machined from the very best cross-woven Carbon Fiber that money can buy!
0
  • UPC:
  • MPN:
109 months ago
BEFORE Placing an order for a firearm, please click here to read our Firearms ordering Information to avoid having your order canceled. FFL REQUIRED QUALITY 1911 FRAME AT THE BEST PRICE OUT THERE !!! (Go ahead Check the Competitors) Manufactured on CNC Machinery by a company with over a 50 year history of gun manufacturing (over 3 generations) and a current manufacturer of well known 1911s. Made of 4140 Steel. Fully machined. Ejector, Pin, Mag Catch Assembly and Recoil Spring Guide Not Included. Try one and I'm sure you will be back for more!
3
E-sarcoinc 5063
109 months ago , by Dealer
Mission First Tactical Battlelink Minimalist Collapsible Stocks is the lightest stock on the market. With heavy input from operators Mission First Tactical utilized the minimal amount of material while maintaining all the necessary functionality
1
  • UPC:
  • MPN:
110 months ago
These are factory original GLOCK 43 Magazines! Flush fit for minimal printing and perfect for conceal carry. We have the extended magazine as well. You need more than just the two magazines it comes with and here's your chance to get factory magazines at a discount price.
0
  • UPC:
  • MPN:
110 months ago , by Dealer
20" upper for your Ar15. 20" Premium 416r Stainless fluted barrel .223 Wylde Chamber (Shoots both 5.56 and .223) 1 in 8" Twist Rifle Length Gas System M4 Feed Ramps .750 Gas Block Diameter 15" Free Float Aluminum Quad Rail Dust Cover Forward Assist 7075-T6 Aluminum receiver 1/2-28 Barrel Threads Note: pictured with Spectre muzzle brake. Comes standard with a2 flash hider unless Spectre brake is selected. M16 MPI BCG and Charging Handle Available as upgrades. $10 Flat Rate Shipping
3
  • UPC:
  • MPN:
110 months ago , by Dealer
Anderson complete upper with 10" quad rail with BCG and charging included $379.99 comes with $10/off with code FACEBOOK10. Free shipping
0
  • UPC:
  • MPN:
110 months ago
Enhanced Trigger Guard, Fits AR-15, Drop In, Black. Black anodized aluminum drop-in replacement for the AR15/M16 firearms platform Features a shallow "V" shape for better use of gloves in tactical shooting or cold weather operations Non-folding, has rounded edges, and fills the annoying "gap" at the rear of the standard trigger guard All mounting hardware included Made in USA ASIN#: B000VYHK80 Model number#: MAG015
17
Amazon 4008
110 months ago , by Dealer
Yankee Hill Machine 7.28" SLR Smooth Midlength Rail System SLR (Slim, Light, Railed) series. The SLR addressed the top two requests of customers: to have a thinner lighter handguard and one that would accept most aftermarket piston systems. Both are features of the SLR rail systems. The new profile of the SLR allows for most piston systems to be used while maintaining a top rail that co-witnesses with the upper receiver.
0
  • UPC:
  • MPN:
110 months ago , by Dealer
AA9130 A drop-in fit next-generation stock, constructed of a proprietary carbon-fiber filled super-tough polymer, for the classic Mosin-Nagant M1891. The stock fits most M1891 rifles, the hex and round receivers found on the 91/30, the Soviet M-38/M-44/Chinese T-53 carbines, and Finnish M-39 rifles and carbines. AA762R 02 A proprietary 10-rd detachable magazine for the AA9130 Archangel OPFOR® Series Precision Rifle Stock - suitable for most Mosin-Nagant rifles, both hex and round receiver, the Soviet M-38/M-44/ Chinese T-53 carbines, and Finnish M-39 rifles and carbines.
2
  • UPC:
  • MPN:
110 months ago
- Magazines will slip right out - Easier takedown and cleaning - Can reduce failure to feeds - Comes with colored installation instructions
1
110 months ago
Enter Code 5BBL For An Extra %5 Off Plus Free Shipping !
0
  • UPC:
  • MPN: BBL
USATAC 552
110 months ago
Varmint 3.5.lb of pull. Rock River Arms Two Stage Trigger Group. Price Includes Shipping.
2
AR15 Sales 13235
110 months ago , by Dealer
Standard military issue surplus kit. These kits could contain laminate or hard wood furniture and we can't guarantee what type of wood furniture you will receive (the majority are laminate as pictured). Some kits contain muzzle nuts and some have slant brakes. MATCHING NUMBERS ON ALL PARTS KITS! Product Code: ppknbFS
3
  • UPC:
  • MPN:
110 months ago , by Dealer
GREAT DEAL ON 80% ERS AND UPPERS FOR ONLY $99 SHIPPED. new 80% lower receivers in stock and all anodized in colors : $59 for the lower and we also have the matching uppers that will be on sale this week and updated on the website by sunday : $99 for the upper and 80% lower in anodized colors : http://ljsarparts.com/PURPLE-anodized-80-lower-receiver-AR1…
0
  • UPC:
  • MPN:
LJ'S Parts 2871
110 months ago
US Made / T6 Aluminum / .223/ 5.56 Only / Brand New User Slides Rod Into Upper Receiver, Rod Then Aligns With Grooves On Barrel Extension, Other End Locks Into Vise Allows Mounting Handguards , Without Damaging Upper Receiver Machined Flats Allow For Secure Mounting When Locking Into Vise ,On Back End Of Rod Works With Aluminum or Polymer Receivers - Best Value On The Market HALF THE PRICE OF OTHERS SIMILAR ON THE MARKET ASIN: B00W7PZROA
0
  • UPC:
  • MPN:
Amazon 507
110 months ago , by Dealer
While supplies last Midwest Gun Works is offering select Stoeger barrels at "once in a lifetime", "never before seen prices". But supplies are limited, and this deal is only available while supplies last. If you've ever thought about an purchasing an extra barrel for your Stoeger shotgun, now is THE time to buy.
0
  • UPC:
  • MPN:
110 months ago , by Dealer
Retail: $40.00 Save $10.00 Price: $30.00 While supplies last!
0
  • UPC:
  • MPN:
110 months ago , by Dealer
Finish your budget build off with a quality US made upper. Built on a MILSPEC Upper Receiver •16 Inch Wylde Barrel 1:9 Twist •A2 Muzzle Device •A2 front sight post •M16 Bolt Carrier Group and Charging Handle. •Forward Assist •Dust Cover •Upper Receiver is Anodized 100% US Made ​5.56 Nato and .223 remington is safe to use. Blemished uppers are structurally sound and may contain imperfections in finish. Brand: HD Defense Product Code: 16-Complete-A2
0
  • UPC:
  • MPN:
110 months ago
The best fun gun ever? http://www.gunsamerica.com/blog/best-fun-gun-ever-the-can-cannon/ The Can Cannon is a patent pending launching device for soda cans and other heavy, thin walled objects. A proprietary gas ported barrel and pressure tube reduce the exposure to high pressure gasses which could destroy relatively delicate projectiles. The Can Cannon is currently configured for launching full, un-opened 12oz soda cans. When used with standard mil spec blanks and fired at an optimum angle it can reach an average distance of 105 yards!
1
  • UPC:
  • MPN:
Go to deal 3541
110 months ago , by Dealer
Ares Armor Slick Side DPMS ar10 upper. $75.00 - 67% off Billet AR10 DPMS Slick Side Upper LR308 Extra High Railed Upper For those that want the simple strait forward design of a slick side upper for their AR10 DPMS rifle, we bring you our new extra high rail slick side upper. Perfect for those dedicated long range rifles, the extra high rail provides a solid scope mounting option provides plenty of clearance for proper weapon manipulation without the risk of hitting your optic. DPMS LR308 pattern upper. MAXIMIZE YOUR SAVINGS.
0
Ares Armor 3327
110 months ago
Side Charging AR-15 Stripped Billet Upper Receiver. This stripped side charging upper does not include the lower receiver or the BCG as depicted in the demonstration photos. Manufacturer: New Frontier Armory Model: Side Charger — Non Reciprocating — Stripped Type: Non Reciprocating Side Charging AR-15 Stripped Billet Upper Receiver Caliber: Multi (will accept any upper and/or caliber designed for the AR-15 platform) Magazine: Accepts any standard MIL-SPEC AR-15 magazine Weight: 13.3 oz Other Specifications and Features of the Side Charging AR-15 Stripped Billet Upper Receiver:
3
111 months ago
SAA Branded Made by Aero Precision AR-15 Assembled Flat Top, T-Marked Upper Receiver. Made by Aero Precision Advanced aerospace manufacturing technology and a highly skilled staff are utilized to produce the industries finest, forged Mil-Spec lowers. Aero Precision receivers are machined on a multimillion dollar, automated, cellular manufacturing system which enables us to produce a product of unequaled quality and value. Manufactured by Aero Precision Forged using 7075 T6 aircraft-grade aluminum Mil-spec A3 flat top upper M4 feed ramp cuts
3
111 months ago , by Dealer
Barrel steel is certified MIL-B-11595E Chromoly Vanadium Alloy and Magnetic Particle Inspected, they are also stress relieved. FEATURES •Carbine Gas System •Mil-Spec M4 Barrel extension with 5.3.1.2 MIL-STD-171 Phosphate Finish •1.2.2.2 MIL-STD-171 Hard Chrome Chamber •1.2.2.2 MIL-STD-171 Hard Chrome Bore •5.56 NATO Chamber •1 in 7 Twist rate •All chambers are individually checked for head spacing before and after plating •All chambers are individually high pressure tested (HPT) and then individually magnetic particle inspected (MPI)
2
  • UPC:
  • MPN:
DOA Arms 1699
111 months ago , by Dealer
Northtech Defense Titanium Forward Assist is a precision CNC machined part to fit all Mil-spec upper receivers, both forged and billet. Manufactured from high strength grade titanium that reduces the weight by 40% over standard steel Mil-spec forward assists. The forward assist button, rod and shell are titanium while the bolt pusher is heat treated chromoly alloy (to a Rockwell hardness of 45HRC) it’s then black oxided for added wear and corrosion resistance. This is a must have piece that not only makes the Northtech Defense billet upper standout but other uppers as well.
0
  • UPC:
  • MPN:
111 months ago , by Dealer
GAT-TAC, Inc. Flash Hider System - $44.95 ( 10% off with gun.deals coupon)
0
  • UPC:
  • MPN:
111 months ago
10% OFF ALL Magpul Handguards - Use Check out code: MAGPUL If one is not careful when handling equipment at the front of a gun that has been operated with, one can get dangerous hand burns. This is where an accessory called the hand guard comes in, protecting the hand of the operator when he need to adjust sights of other equipment at the front of a weapon.
0
  • UPC:
  • MPN:
111 months ago
AK 47 Barrel 4150 Steel AK47 Rifle Chrome Lined , New US 762 X 39 Barrel, Threaded with Gas Port a great choice for your AK47 Kit build. ATLANTIC ARMS MFG
0
  • UPC:
  • MPN:
111 months ago
$99 for a black anodized 80% lower AND a jig kit. The jig kit is usually $86 at One Stop Guns and $100+ elsewhere.
0
  • UPC:
  • MPN:
111 months ago
This 5.56 chambered 8 inch Modern Series Barrel is machined from 4150 Chrome Moly Vanadium steel with a QPQ Corrosion Resistant Finish and QPQ coated M4 feed ramp extension. All NFA/ATF Rules Apply You may use this barrel with a lower receiver that is a Registered SBR, Machine Gun, or Pistol. Possession of this barrel along with a Non-NFA lower receiver is Prohibited, except when installed on a Pistol configuration firearm. Additional Info Length 8" Material 4150 Chrome Moly Vanadium Profile DRP Finish QPQ Corrosion Resistant Gas System Length Pistol Gas Block Journal .750"
0
  • UPC:
  • MPN:
111 months ago
This 5.56 chambered 7.5 inch Performance Series Barrel is machined from 4150 Chrome Moly Vanadium steel with a QPQ Corrosion Resistant Finish. Our performance series barrels feature a FailZero Nickel Boron Coated Extended M4 Feed Ramp Extension. Hanson Series Barrels feature our proprietary BA Hanson profile and include a pinned lo-pro gas block. All NFA/ATF Rules Apply
0
  • UPC:
  • MPN:
111 months ago , by Dealer
MOVING SALE. FACTORY MAGS AT A DISCOUNTED PRICE. This replacement magazine is a factory original from Ruger. Factory replacement parts are manufactured to the exact same specifications and tolerances and use the same manufacturing materials as the original parts which guarantees excellent fit and reliable operation. Keeping a few extra factory magazines around is never a bad idea; extra magazines save loading time at the range and also serve as a backup for those days when you simply cannot remember where you put your primary magazine.
2
111 months ago
This Bolt Carrier Group comes fully assembled by St. Croix Tactical for your AR15, M16, or M4. 5.56/.223 Nickel Boron 9310 Steel Bolt MPI Bolt (Magnetic Particle Inspected) Shot Peened Bolt Grade 8 Hardened Fasteners Key Staked per Mil-Spec Black Extractor Insert Crane O-Ring
3
  • UPC:
  • MPN:
111 months ago , by Dealer
Code INSTANT125 Good for 12.5% Off All Products on our Spring Sale Page Review of our lower after 18K Rounds* *This is a Customer Review on a Public site. Tn Arms Lower on 50 BMG Upper Upload your own artwork or Put your Trust Information in the Order Comments Our Lowers Have a Lifetime Warranty and Are the Toughest Hybrids on the Market
0
  • UPC:
  • MPN:
111 months ago
https://www.tandemkross.com/AR-15-Oversized-Combat-Magazine-Release_p_146.html -Larger, extended magazine release for faster reloads -Ergonomic feel and much easier to reach -Clean, square look with non-slip texture -Machined from super strong 7075 T6 Aluminum and Type III Black Hard anodized to last a lifetime
5
111 months ago
https://www.tandemkross.com/Mark-Series-and-2245-Reliability-Combo_p_169.html Get your moneys worth with this great combo deal. Get two great products for one low price and save huge on shipping! TANDEMKROSS "Firestarter" Firing Pin at a glance: -Titanium is 40% lighter than steel -Helps reduce lock time for higher accuracy -Non-corrosive and highly durable -TANDEMKROSS LIFETIME guarantee
0
111 months ago , by Dealer
The Ultimag AK 30R provides a strong, durable, and reliable magazine solution using high grade materials. Multi-textured surface for enhanced grip when handling and reloading Unique floor plate for versatile coupling options Disassembled by hand, no tools needed Long-lasting cataphoresis-coated stainless steel spring for ideal corrosion protection Hybrid AK spring design prevents tilt Unique internal design for smoother, more reliable feeding Low-friction follower for increased reliability Durable, lightweight, impact and crush-resistant reinforced polymer construction
0
  • UPC:
  • MPN:
111 months ago
These faceted carriers are plated by UTC (FAIL ZERO) using their EXO finish and they look super nice. Bolt Subassembly: ​Bolt: 9310 Alloy Steel, Shot Peened MPI Inspected Extractor: Shot Peened Hardened D2 tool steel extractor Black Extractor Insert O-Ring: Mil-Spec Gas rings (3): Milspec Coating: Nickel Boron Plated (UCT Coatings) Bolt Carrier: Heavy Duty M16 design 8620 steel, plated ​Gas key: hardened billet 4140 machined, plated Gas Key Screws,: Grade 8 properly staked (heavy strike). Screws on faceted model may or may not be plated. Nickel Boron Plated (UCT Coatings)
3
111 months ago
Upper receiver for ar15. 7075-T6 Aluminum receiver M4 Feed Ramps Dust Cover, Forward Assist 10" Free float quad rail. .223 Wylde chamber (shoots 5.56 or .223) 16" m4 barrel, 1:8 twist a2 flash hider Item #: 16upper10
0
  • UPC:
  • MPN:
111 months ago
7.5" Stainless Steel Barrel 1:7 twist. m4 feedramps. 223 Wylde Chamber (shoots both 5.56 and 223) Dust cover, Forward Assist, A2 Flash Hider 7" Free Float Quad Rail Item #: 7.5upper
0
  • UPC:
  • MPN:
111 months ago
Manufactured by our finest domestic Mil-Spec contractors these are among the best 5.56 AR rifle bolts on the market and the same bolts we use as the basis of our renowned custom rifles! Our bolt is precision machined from Carpenter No. 158 steel, shot peened for increased strength and a includes a tool steel extractor and ejector, appropriate extractor spring, and is MPI (Magnetic Particle Inspected and randomly batch HPT (High Pressure Tested) . The extractor is 4140 gun quality, annealed, cold drawn steel per the Mil-Spec
0
  • UPC:
  • MPN:
112 months ago
Use promo code mdstealth for 10% off. Introducing Stealth Armss revolutionizing Phantom Jig! Stealth Arms has made it dummy proof to complete an 1911 80% Frame WITHOUT the need for a milling machine! With our patent pending Phantom Jig, you will have everything needed to bring your 1911 80% Frame to completion and ready to accept parts. You now only need 3 peices of equipment to completely finish your 1911 80% Frame: Vise; Drill Press or Drill;
7
  • UPC:
  • MPN:
112 months ago
Daytona Defense & Tactical trigger guard is made out of 6061 billet aluminum for strength, and is opened up for use with gloves. The Daytona Defense & Tactical trigger guards are also the only trigger guards that look as good as they function.
0
  • UPC:
  • MPN:
112 months ago , by Dealer
20 Round SR-25 (.308 / 7.62 x 51) Stainless Steel -- Fits SR-25 or DPMS-style -- New Black T Teflon Coating; Exclusive to C Products Defense -- Matte Black Finish -- Black Follower -- 17-7 Stainless Steel Wire Spring -- 6.25 oz. -- 100% Manufacturer's Warranty -- Made in the USA by C Products Defense -- North River Distributors, LLC does not ship high capacity magazines to CA, CO, CT, Chicago IL, DC, MA, MD, NJ, and NY.
0
112 months ago , by Dealer
With twenty-four years of customer satisfaction, this design has proven reliability and 50% tighter tolerances than other military specification magazines. Same length as stock magazines with extra capacity and improved performance. This is the same design CMC supplies to America's top 1911 manufacturers for use as factory standard in their pistols. Available in stainless and blued carbon steel materials. Since 1992, this line of .45 ACP magazines have never suffered from the common problem of cracked feed lips. Available with base pad.
0