Gun Parts

(16,234 deals total)

The Anderson Manufacturing AM-15 Utility 5.56 Complete Upper Receiver Group is built from the factory ready to be installed on your lower receiver. This complete AR-15 upper features a 16" barrel made from 4150 Chrome Moly Vanadium steel with a durable Nitride finish and a carbine length gas system with a 1:8 twist rate. The upper receiver is forged from 7075-T6 aluminum and hardcoat anodized black. The 15" free float handguard features M-LOK slots and an interrupted picatinny top rail to save weight.

The Radical Firearms 18” .223 Wylde Barreled Upper is a match grade, drop-in solution for your next AR build. Crafted with quality materials and covered by Radical’s lifetime warranty, this better-than-MIL-SPEC upper receiver provides an outstanding solution for any budget. Arrives at your door with the hard work done, just drop in your favorite charging handle, BCG, and sights! Features: - 18" 416R stainless steel barrel - Chambered in .223 Wylde with 1:8 twist rate - 1/2x28 Radical Firearms BMD Muzzle Brake - 15" free float Radical Firearms RPR M-LOK Rail

Elevate your AR-15 or AR-10's performance with the Rise Armament RA-140 Join or Die Super Sporting Trigger. This single-stage AR platform trigger replaces your mil-spec trigger to provide a crisp, lightweight 3.5-lb trigger pull for an upgraded shooting experience. Experience a clean break, near zero over-travel, and a lightning-fast reset for improved shot control and faster follow up shots - ideal for competition or tactical use. Features: - Compatible with MIL-SPEC AR-15 and AR-10 weapons - Lightweight, 3.5-pound single-stage trigger - Flat trigger face - Drop safety feature

AR-15 Bolt Carrier Groups Roundup from $95.99

CUS16M4 Details: AR15 CUSTOM UPPER 16" 556 PENCIL BFI M4 HANDGUARD Specifications & Features: • Barrel: Bushmaster 5.56NATO 16" M4 pencil barrel with A2 Flash hider. • Chamber: 5.56NATO • Twist Rate: 1:8" • Gas System: Carbine-Length Direct Impingement with Flat Top Gas Block and Bayonet Lug • Handguard: M4 Handguard • Muzzle Device: A2 Flash Hider • Overall Length: 23.5" BOLT CARRIER GROUP OR CHARGING HANDLE IS NOT INCLUDED This item cannot be shipped to California, Connecticut, Maryland, New Jersey, New York, or Washington D.C. 783583554015

AR-15 / M16 high capacity 100 round dual drum mag. Manufactured in South Korea for Korean military use. This is the Gen II version that list new re-enforced feed lips and does not require a graphite lubricant. Comes complete with case. Buy 10 for $84.99 each and save 6% Item #: ACC-AR15-100DD-G2

DISCLAIMER: This product is not manufactured, authorized, endorsed, or warranted by GLOCK. GLOCK does not warrant or represent that this product is compatible with GLOCK pistols. The latest offering in high quality Korean made Glock drum magazines, we are proud to introduce our new 40 round drum for double stack .45 Glock handguns! Fits pistols from full size to subcompact.

75 round drum mag for the AK-47 rifle. Rear Loading, fits all High Cap 7.62 x 39 caliber AK-47 type rifles. Item #:acc-sakd76275

DISCLAIMER: This product is not manufactured, authorized, endorsed, or warranted by GLOCK. GLOCK does not warrant or represent that this product is compatible with GLOCK pistols. 50 Round Drum Magazine in .40 caliber for all double stack Glock .40 Caliber Pistols. These drums are now coming with completely black polymer bodies. Will not fit Smith and Wesson manufactured handguns, only Glocks chambered in .40 S&W.

100-026-421WB

100-041-773WB Enhanced FM9 4in Upper Cartridge: 9 mm Luger Finish: Black Style: Complete Contour: Medium Length: 4" Twist: 1-10 Description Specs Enhanced 9mm Pistol Upper Receivers with Set of MLOK Covers!

100040692 100-040-692WB M4A1 Stripped SOCOM Upper Receiver Handguard Only 14.5in Cartridge: 5.56x45 Finish: Flat Dark Earth Style: Stripped Length: 14.5" Muzzle: 1/2-28 Twist: 1-7 Description Specs Superior Specs. Ultimate Performance. The Daniel Defense M4A1 SOCOM Block II Upper Receiver has been designed for those looking to match the specs and performance on the M4A1 SOCOM Block II carbines used by troops during Operations Iraqi Freedom and Enduring Freedom.

The PWS MK1 PRO line features the PWS long stroke piston system. This line is perfect for shooters looking for a cost-effective piston system firearm without sacrificing the high quality standards PWS has been known for over a decade. Featuring a 3-setting adjustable gas system for users with suppressors, free-float MLOK handguard, Radian Raptor charging handle, extruded upper receiver that integrates an extremely solid handguard attachment system, the MK1 PRO line has an assortment of features ideal for shooters of all levels.

Add the Colt legend of reliability to your rifle or build with these complete feature 1/7 RH twist in a chrome lined, button rifled barrel. Available with or without a charging handle, bolt carrier group, and back up sights. All NFA rules apply. NOTE: Does NOT include bolt carrier group, charging handle, or rear backup sight AR-15, Issue:11, Page:003 Big Book Catalog, Issue:72, Page:003 160-000-446WB

Lancer set out to design a better 5.56 magazine; one with the reliability of steel and the durability and weight of polymer. The L5 Advanced Warfighter Magazine (AWM®) is that magazine. The L5AWM’s exclusive hybrid design includes a hardened steel feed lip assembly molded into a proprietary polymer body with aggressive surface texturing to create the ultimate rifle magazine tough enough for military, law enforcement, and competition applications. ncreased Durability and Reliability

Features and Specifications: Manufacturer Number: Fits: SHG1200 12" Slim Rifle-Length Free Float Forend Finish: Military Type III Anodized Material: 6061 T6 Aluminum (Rail), 4140V Steel (Barrel Nut) Weight: 7.2 oz. Seamless Intergraded top rail M-LOK Mounting locations on 3 sides for rails or compatible accessories. Place rails or accessories into any Position on the Forend for Nearly Unlimited Customization. Barrel Nut for perfect location of the forend. Virtually Indestructible Limited Lifetime Warranty Made in the USA Fits: AR-15 with Low-Profile Gas Blocks Notes:

Our 10.5" 5.56 barrel is the perfect addition to your AR15 build. Crafted to mil- spec standards from 4150 Chrome Moly Vanadium with a QPQ corrosion resistant finish, this barrel provides time tested precision and accuracy for your AR15 carbine length build. This barrel is HP and MPI tested. Caliber 5.56 NATO Barrel Length 10.5 Barrel Material 4150 Chrome Moly Vanadium Barrel Finish QPQ Corrosion Resistant Gas System Length Carbine Gas Block Journal .750" Gas Port Size 0.0785 Barrel Rifling Button Rifling Twist Rate 1:7 inches Thread Pitch 1/2-28 Threaded Barrel Extension M4

AK47MAG30 The AC Unity AK-47 30 Round Magazine features a black polymer construction with a black polymer follower and removable floorplate. It holds 30 rounds of 7.62X39 and is compatible with any AK-47 variant rifle. The AC-Unity 30rd AK47 7.62x39mm BHO Magazine is impact resistant, lightweight, and highly reliable for all AK47/AKM weapons. Will fit and function in all 7.62x39 AK47 style rifles/carbines/pistols that use standard AK mags.

HK94/MP5® D-50 MP PMAG 50-RD DRUM BLK Mfr Part: MAG1181-BLK Cartridge: 9 mm Luger Capacity: 50-Round Quantity: 1 Finish: Black Material: Polymer Brownells # 100075148 A Strong, Lightweight Drum Magazine for Your MP5-Style Guns

17/34 9mm 17-Rd Mag 3-Pack Cartridge: 9 mm Luger Capacity: 17-Round Quantity: 3 Finish: Black Material: Polymer Description Specs Convenient, Money-Saving 3-Paks Of Factory Mags For Popular Models

SKU 5165491720 Brand Palmetto State Armory Model Number 5165491720 UPC 5165491720 DETAILS Barrel Length: 8.5" Gas System: Pistol-length Barrel Profile: Heavy Barrel Steel: Chrome Moly Barrel Finish: Nitride Chrome Lining: None Muzzle Thread: 5/8-24" Chamber: 300AAC Blackout Twist Rate: 1 in 7" Barrel Extension: M4 Diameter at Gas Block: .750" Gas Block Type: Low-profile Muzzle Device: A2 Style Flash Hider Receiver Material: Forged 7075 T6 Receiver Type: M4 Handguard Type: 7" Lightweight M-Lok Rail Bolt Carrier Group Included: No Bolt Steel: N/A

BUN-228 PSA 23 Round 5.7 Rock Steel Magazine DETAILS Brand: Palmetto State Armory Caliber: 5.7x28mm Capacity: 23 **While this magazine will fit in a Ruger 5.7 magwell, we cannot guarantee that they will function in a Ruger 5.7 Pistol *Due to geometry differences, the 5.7 Rock 23 round *magazine will fit in a Ruger 5.7 Pistol as well as our 5.7 Rock pistol, however function cannot be guaranteed. A 20 round Ruger 5.7 magazine will NOT work in a 5.7 Rock. FEATURES This black oxide alloy steel 23-round 5.7x28mm magazine is compatible with the PSA 5.7 Rock Pistol.

SKU 5165502312 Brand Palmetto State Armory Model Number 5165502312 UPC 5165502312 DETAILS Barrel Length: 16" Gas System: Carbine Barrel Profile: M4 Barrel Steel: 4150V Chrome Moly Vanadium Barrel Finish: Phosphate Chrome Lining: None Muzzle Thread: 1/2-28 Chamber: 5.56 NATO Twist Rate: 1:7 Barrel Extension: M4 Diameter at Gas Block: .750" Gas Block Type: F-marked Front Sight Base Muzzle Device: A2 Flash Hider Receiver Material: Forged 7075 T6 Aluminum Receiver Type: M4 Handguard Type: PSA Classic Polymer with Heat Shield

This BCA AR-15 Complete 350 Legend rifle length upper has a 16" m4 contour barrel with a 416R stainless finish, and features a 1:16 Twist Rate, with a carbine length gas system. It includes a 15" MLOK rail, an M4 flat-top billet upper receiver, a BCA Bolt Carrier Group, a Flash Hider, and a rear Charging Handle. This 350 Legend upper is compatible with any mil-spec AR-15 lower. This has the new handguard. SKU 495N-UA350LCM416116SSBUR-15M3 Weight (lbs) 6.000000 Magazine Capacity N/A Length 16 Profile M4 Contour Twist 1:16 Finish Stainless Material 416R Stainless Steel

Stainless Steel Magazine catch with Aluminum textured button, Fits Ar15 / Ar10 lowers. Great way to accent your Ar-15 build with some extra detail.

The SB Tactical TF1913 Triangle Pistol Stabilizing Braceis a low-profile, left side-folding triangle design compatible with all platforms utilizing an M1913 (Picatinny) interface at the rear of the receiver. The TF1913TM is a complete assembly offering pull-through opening and a solid lock-up when extended. Gun Compatibility: Platforms with M1913 interface at rear of receiver (SIG MPX, SIG MCX, SIG RATTLER, Rock River LAR-PDS, etc.)   Features   •Complete assembly, ready-to-install • Advanced steel hinge design locks in both folded and extended positions

The SB Tactical® FS1913TM Aluminum Pistol Brace features a left side-folding design that's compatible with all firearms that utilize a Picatinny interface at the rear of the receiver. Lightweight, durable Pistol Brace is easy to install and will give you an additional point of contact for increased stability and control. Fits platforms with M1913 interface at the rear of receiver Durable steel hinge locks in both folded and extended positions Pull-through design for quick deployment Left side-folding design Lightweight aluminum construction Adjustable nylon strap

The MPX Pistol Stabilizing Brace® is engineered to fit the receiver cuts of the SIG SAUER® MPX and MCX, giving you an additional point of contact for enhanced stability and control. It's complete, ready to install, and comes with an integral M1913 adjustable receiver saddle. NOTE: Will not fit SIG MPX Copperhead models. Compatible with SIG SAUER MPX and MCX (excluding MPX Copperhed models) 3-position adjustable Complete assembly, ready to install M1913 adjustable receiver saddle Adjustable nylon strap US Veteran-designed and proudly made in the USA Order today! Item#: 742348

The SB Tactical® FS1913TM Polymer Pistol Brace features a left side-folding design that's compatible with all firearms that utilize a Picatinny interface at the rear of the receiver. Lightweight, durable Pistol Brace is easy to install and provides an additional point of contact for increased stability and control. Fits platforms with M1913 interface at the rear of receiver Durable steel hinge locks in both folded and extended positions Pull-through design for quick deployment Left side-folding design Lightweight polymer construction Adjustable nylon strap

This BCA AR-15 complete 7.62x39 rifle length upper has a 16" heavy barrel with a parkerized finish, and features a 1:10 twist rate, with a carbine length gas system. It includes a 15" MLOK rail, an M4 flat-top forged upper receiver, a BCA bolt carrier group, a flash hider, and a rear charging handle. This 7.62x39 upper is compatible with any mil-spec AR-15 lower. More Information Color White SKU 9453N-UA762CHB16110PEMW-15M3 Weight (lbs) 6.250000 Magazine Capacity N/A Length 16 Profile Heavy Barrel Twist 1:10 Finish Parkerized Material 4150 Chrome Moly Vanadium

You can turn your 5.56/.223-chambered AR-15 into a .22LR—and plink away without spending a fortune on ammo. The CMMG® Bravo Conversion Kit works with direct impingement AR-15s with ANY length of gas system. Simply swap out your AR-15's existing bolt carrier group for this Conversion Kit and you're ready to rock. If you have a traditional AR-15, it'll work. All-stainless steel construction Works with direct impingement ARs with any length gas system For best performance, use a round-style hammer and 36-grain bullets Includes (3) 25-rd. mags with bolt hold open followers Order today!

Radical Firearms produces quality precision made barrels perfect for your next build or replacing an old barrel. Machined from 41V50 chrome moly vanadium steel and finished with a corrosion resistant salt bath nitride. This exceptionally durable barrel has a bore that is harder than traditional chrome lining without the accuracy robbing side effects.

This BCA AR-10 complete .308 rifle length upper has a 20" black nitride cold hammer forged SOCOM barrel, and features a 1:10 twist rate, with a rifle length gas system. It includes the new 15" MLOK split rail, an M4 flat-top forged upper receiver, a BCA AR10 bolt carrier group, a flash hider, and a rear charging handle. This .308 upper is compatible with 1st gen DPMS low profile lowers. More Information SKU 9083N-UA308RMW20110MHFFUR-15MSR Weight (lbs) 8.250000 Magazine Capacity N/A Length 20 Profile SOCOM Twist 1:10 Finish Black Nitride Material 4150 Chrome Moly Vanadium

Designed by Q®, the HBPDWTM is the adaptation of the iconic Honey BadgerTM Pistol Stabilizing Brace® for the AR-15 lower receiver. Lighter and shorter, the HBPDW is the evolution of the adjustable PDW-style brace, giving you all of the advantages of a pistol with improved control by adding an additional point of contact for stabilization.

Assembled Black LFA Combat RMR window slide. Select your barrel from available options Installed 3CR Tactical slide completion kit with recoil rod Polymer suppressor height sights Compatible with Glock 17/22 Gen 3 frames

SKU: 11121

Here at AR15Discounts.com we work with a wide variety of machine shops and barrel manufacturers. When we come across a barrel maker we like, we will often decide to private label those barrels for resale under the NBS brand. We purchase these barrels in large quantities and then pass the savings on to our customers. Why buy an NBS Brand Barrel: American Made – Sourced from a variety of Tier 1 Manufacturers here in the United States Quality Control – All barrels are manufactured under ISO-9001 or better quality standards

To understand the need for a flash hider, especially a Birdcage Flash Hider, one needs to understand who this simple, but quite effective addition to .30 caliber carbine is for – the shooter. While you may think its sole purpose is to hide the flash during low-light firing and lessening the chances of detection you’d be only partly correct. Features: - Caliber: .30 caliber - Material: Steel - Finish: Mil-Spec Heavy Phosphate - Weight: 1.9 Ounces - Length: 1.75” - Diameter: 0.86” - Thread: 5/8 x 24 TPI

Davidson Defense "The Ghoul" AR-15 Rifle Featuring Davidson Defense Upper 5.56 NATO 16" < > QPQ Nitride 1:7T 15 M-Lok Trinity Force Freefloat Handguard Full Build Kit (Assembled or Parts Kit) Caliber: 5.56x45 NATO / .223 Remington

Davidson Defense "Megaton" AR-15 Rifle Featuring Davidson Defense Upper 5.56 NATO 16" < > QPQ Nitride 1:7T 15" M-LOK Davidson Defense Free-Float Handguard Full Build Kit (Assembled or Parts Kit) Caliber: 5.56x45 NATO / .223 Remington

Davidson Defense "Minerva" AR-15 Rifle Featuring Davidson Defense Upper .223 Wylde 17.1" < > Nitride 1:8T 16.5 M-Lok Gauntlet Arms Freefloat Handguard Full Build Kit (Assembled or Parts Kit) Caliber: 5.56x45 NATO / .223 Remington

This BCA AR-15 complete 5.56 Nato rifle length upper has a 16" M4 contour barrel with a black nitride finish, and features a 1:7 twist rate, with a mid-length gas system. It includes a 15 1/4" MLOK rail, an M4 flat-top billet upper receiver, a BCA bolt carrier group, a flash hider, and a right-side charging (Gen2) handle (patent protected). This 5.56 Nato upper is compatible with any mil-spec AR-15 lower. This has the new handguard. More Information SKU 611N-UASCH556MM41617M-15M3 Weight (lbs) 5.300000 Magazine Capacity N/A Length 16 Profile M4 Contour Twist 1:7 Finish Black Nitride

ASC’s 30 Round 7.62x39 Stainless Steel magazines are undeniably the 1st fully reliable 7.62x39 on the market. Engineered with the highest levels of quality for durability and greater longevity, simply the best in the industry! Our magazines are manufactured 100% start to finish in the USA using .020 gauge 410 Stainless Steel Alloy, heat treated for superior strength and lasting endurance.

GUN-989-002 This billet AR receiver set was engineered as a matched set and addresses the structural design weaknesses in USGI receivers while enhancing overall tolerances to improve shot to shot consistency. Wilson Combat's extensive experience as a premier custom builder of AR-15 style rifles will ensure your satisfaction. The precise bolt raceway allows for smoother chambering and more rigid receiver walls to reduce firing flex and improved feeding. The lower receiver has been enhanced with an oversized mag well, integral trigger guard and added lower strength.

Wilson Combat AR-15 Match Grade 18" Barrel .223 Wylde Urban Super Sniper 1-8 Twist, Stainless, Fluted Nearly two decades of building the finest custom tactical AR-15 rifles have given Wilson Combat the insight to develop a comprehensive line of stainless steel, match grade barrels that offer superior accuracy, reliability and longevity for your next custom AR rifle project. All Wilson Combat Match Grade AR-15 barrels are precisely crafted of the finest American-made 416R rifle rated steel on computer controlled equipment to an exacting list of technical specifications.

Description The AR Receiver Extension Kit is constructed from aircraft grade aluminum with rolled threading. The buffer tube has been hard coat anodized for maximum corrosion and wear resistance. A standard buffer spring and 3oz carbine buffer are included as well as a castle nut and lower receiver end plate. This assembly kit will fit on all Mil-Spec AR-15 lower receivers. - Mil-Spec Carbine Buffer Tube / Receiver Extension - 6 Position Aircraft Grade Aluminum - Carbine Buffer Spring - Castle Nut/Receiver Nut - Mil-Spec Receiver End Plate - Carbine Recoil Buffer

The PMAG 30 AR/M4 GEN M2 MOE is a 30-round 5.56x45 NATO (.223 Remington) AR15/M4 compatible magazine that offers a cost competitive upgrade from the aluminum USGI. It features an impact resistant polymer construction, easy to disassemble design with a flared floorplate for positive magazine extraction, resilient stainless steel spring for corrosion resistance, and an anti-tilt, self-lubricating follower for increased reliability. SKU: 0002 UPC: 873750008264 MFR#: MAG571-BLK - Black finish - Impact & crush resistant polymer construction

Finish : DLC Make Model Fit : AR-15.Universal;M16.Universal Item Length (Inches) : 2.600 Material : Stainless Steel Item Weight (lbs) : 0.244 Brownells sku: 430102173 MPN#: FH556RC-1/2-28 UPC#: 084871318631

This match grade G19 9mm barrel is designed to drop right into your Glock 19 Polymer 80 pistol build or OEM slide. The barrel is made from 416R steel with a 1:10 barrel twist ratio and it features a melonite finish to add extra wear resistance and ease of maintenance, and the black nitride gives it a sleek, polished look. Coatings made through Physical Vapor Deposition (PVD) are highly durable and offer reduced friction, which significantly enhances both durability and performance. Caliber - 9MM Barrel Length - 4" Color - Chameleon Features Crown Porting Fits Glock OEM 19 Gen 1-4

This assembled 6 inch M-LOK upper receiver comes with a 7 inch free float handguard that has a slant cut design and is built with only the best Mil-Spec components. The heart of this upper is comprised of a 4150 barrel. Barrel Specifications: Caliber 300BLK Length 6" Material 4150 Chrome Moly Vanadium Profile Medium Finish QPQ Corrosion Resistant Gas System Length Pistol Gas Block Journal .750" Dimpled? Yes Twist Rate 1:7 Muzzle Thread 5/8x24 TPI Weight 14oz Barrel Extension M4 Feed Ramps Target Crown 11 Degree Upper Receiver:

Discover the pinnacle of tactical performance with AO Precision's True Mil-Spec M4 Flattop Upper Receiver. Designed for unparalleled compatibility and reliability, this upper receiver is the ideal choice for custom AR-15 builds. FEATURES Mil-Spec 7075 T6 Aluminum: Crafted from durable 7075 T6 aircraft-grade aluminum for superior strength and lightweight handling. True Mil-Spec Dimensions: Precision machined to ensure a perfect fit with all mil-spec lower receivers and parts.

Mothers Day Limited Edition AR15 Anodized 80% Lower Receiver - Fire / Safe Engraving - Optional Engravings ^ These lowers come engraved with FIRE / SAFE on both sides of the receiver.This Anodized 80% Lower Receiver comes with a limited time Mothers Day graphic engraved on the right side magwell and ships right to your door. It's made from T6 heat-treated 7075 aluminum with a Type III hardcoat anodized finish to protect against wear and tear and corrosion.

Suppose you're planning on making an upgrade to your AR platform. In that case, the first change is the trigger is almost always the first change, so gear up with OpticsPlanet Exclusive RISE Armament RA-242 Enhanced Rifle Trigger. This single-stage trigger combines Rise Armament's high-quality designs and OpticsPlanet's unique style. The RA-242 Rifle Triggers are designed with a highly light 3.5-pound pull weight, crisp break, and fast reset. It is also constructed from high-grade and heat-treated tool steel and aluminum.

 Sig Sauer P365 Custom Works Fire Control Unit Black Specifications Product Name: Sig Sauer P365 Custom Works Fire Control Unit Black Action: Semi-Automatic Brand: Sig Sauer MPN#: 8900165 UPC#: 798681626007

Blind Box - Ambidextrous Charging Handle These AR-15 charging handles are for AR-15 style rifles and are built with an aluminum construction and a black nitride finish. It features latches on both sides for use with either hand. Fits all AR-15 platform guns by DMPS, Mega, Aero precision, CMMG, and most other companies.   

SPECIFCIATIONS: Brand: Gauntlet Arms Model: AR-15 Stock Style: Rifle Stock Material: Glass Filled Polymer Sling Mount: Yes Sling Style: QD Mount, Sling Loop Buffer Tube Compatibility: Mil-Spec Adjustability: Yes Color: Black Storage Compartment: No Weight: 0.5 lbs Includes Buffer Tube: No Caliber Specific: No Adjustable Cheek Riser: No Rubberized Buttpad: Yes   

Want to see ALL of our Gun.Deals Exclusive Prices? CLICK HERE TO CHECK OUT ALL THESE DEALS SPECIFICATIONS: Brand: SCT Manufacturing Model: Assembled Sub Compact Frame Black Glock 43x and 48 Compatible Material: Polymer Blend Platform: G43X & G48 Color: Black Country of Origin: USA Serialized: Yes Looking for a Coupon Code?! Use the Current Month and Year (ie: august2023) at checkout to save on your next order Cannot Be Combined With Any Other Promotion Or Coupon Code

Want to see ALL of our Gun.Deals Exclusive Prices? CLICK HERE TO CHECK OUT ALL THESE DEALS SPECIFICATIONS: Brand: Davidson Defense Model: 30rd Steel AR15 Magazines Caliber Compatibility: .223 Remington, 5.56 NATO, .300 Blackout Capacity: 30 Platform Compatibility: AR-15 Feed Lips: Polymer Follower Color: Grey Construction: Steel Looking for a Coupon Code?! Use the Current Month and Year (ie: august2023) at checkout to save on your next order

Want to see ALL of our Gun.Deals Exclusive Prices? CLICK HERE TO CHECK OUT ALL THESE DEALS SPECIFICATIONS: Brand: Omega Mfg. Model: Mil-Spec Lower Parts Kit Platform: AR-15 Includes Fire Control Group: Yes Includes Grip: Yes Grip Model/Style: Mil-Spec A2 Grip Grip Color: Black Full Auto Compatible: No Restricted States: No Weight: .505 Lbs Note: Trigger Guard Type/Style May Vary (ie: Mil-Spec and/or Enhanced)

AR15 M16 BOLT CARRIER GROUP COMPLETE AR15 Complete Bolt Assembly, Brand New • AR-15 Complete Bolt and Carrier • Bolt, Bolt Carrier and Firing Pin Ready to Drop Into the Rifle or Carbine Upper of your Choice • Staked Gas Key prevents Gas Leakage that leads to Short Stroking Specs: 100% Made in the USA in Fort Collins, Colorado Coating: Black Nitride Print Spec: made to Mil-spec drawing except no chrome lining. Carrier Material: 8620CD Bolt Material: 9310 This item cannot be shipped to California, Connecticut, Massachusetts, New Jersey, New York or the state of Washington.