Other Parts Gun Parts
(350 deals total)
- Other Parts
from $199.99
UPC:
810206570135
MPN:
ARCFIRE-NA-V2-0-90-180
Manufacturer:
AS Designs
Color:
Black
Includes:
pre-cut trigger and KNS safety detent, One SkidTactical FRT/Super Safety Trigger Cut Jig included
from $249.99
UPC:
810206570142
MPN:
ARCFIRE-AMBI-V2-0-45-180
Manufacturer:
AS Designs
Color:
Black
Features:
Includes pre-cut trigger and KNS safety detent, SkidTactical FRT/Super Safety Trigger Cut Jig Included, M2 tool steel ARC V2 Cam, Lever, Detent Bar, 4140 steel ARC V2 Primary Selector
from $12.99
UPC:
767820107516
MPN:
XTS-FSTP
Material:
Aluminum
Finish:
Anodized
Color:
Black
from $31.57
UPC:
848754010230
MPN:
VTARUVB
Caliber:
-
Model:
Upper Receiver Block
Type:
Vise Block
19 months ago
ODIN Works is always looking for new ways to make your build as customizable as possible to fit you, the shooter. This adjustable buffer does just that. Available to fit AR-10, AR-15 and 9mm platforms, each buffer also comes with multiple weights to customize the weight combination for your personal build.
Technical Specs
•Available in AR15, AR10 and 9mm
•AR15 buffers available in either lite or heavy
•AR10 and 9mm buffers only available in heavy
•Lite Buffer made from aluminum
•Heavy Buffer made from stainless steel
•Weights included for different weight combinations
- UPC: 857116007979
- MPN: OS-ABS
19 months ago
The ODIN Works Tunable Low Profile Gas Block allows precision tuning of the gas system on any standard or suppressed AR-15. It’s adjusted by rotating the tuning screw to your desired depth. Then it’s locked in place with the set screw. The tunable gas block is machined from a solid block of 303 Stainless Steel for strength. It has stainless steel tuning screws for corrosion resistant adjustment. This one is made specifically for barrels with the .750”-inch diameter gas journal and it’s small enough to fit inside most handguards.
- UPC: 857392006666
- MPN: GB-TUNE-SS
19 months ago
Made using old German casting and metal working techniques, the mount is engineered and built like a Panzer to absorb and deflect hard impacts
Made of grade 410 stainless steel for a lifetime of hard use in harsh environments
Each piece is inspected and polished to maximize smooth edges to reduce snagging on gear
Stainless steel surface further hardened by nitriding
Super short mlok screws for tight tolerances
Made for all mil-spec QD sling swivels
Amazon
132
19 months ago
$24.95
The Wilson Combat Ambidextrous AR Safety features an ambidextrous design so the operator can actuate the safety from either side of the rifle. The double-head USGI style safety selector is a rigid, precisely sintered part with a tough black nitride finish that is wear and corrosion-resistant.
This ambidextrous safety selector is an easy upgrade to any semi-automatic AR platform and is compatible with any AR/AR-10/AR pistol caliber carbine that will accept a USGI style safety.
Specifications:
Ambidextrous Design
Drop-In Replacement for Standard Mil-Spec Selectors
- UPC: 810025500566
- MPN: TR-SSA-B
19 months ago
Although you may think a safety switch is a minor feature, the Geissele Super Configurable Safety gives you a genuinely ambidextrous functionality and the ability to configure the safety selector switch on your carbine to fit a variety of shooting styles and operations.
Features
- Color: Black
- Material: Stainless Steel
- Finish: Black Nitride
- Orientation: Ambidextrous
- UPC: 810081130370
- MPN: 05-1870B
19 months ago
Our Accu-Tac AR flash hider sports a three-pronged external profile and our exclusive external accurizing flutes that improve muzzle harmonics over other blast dispersing brakes. These extensively tested features effectively dissipate flash and minimize muzzle signature but unlike many competitive AR muzzle devices, the Accu-Tac has no negative impact on accuracy. Hardened 4140 steel, fits standard, GI threaded AR barrels.
Specifications:
Material: Hardened 4140
Thread: 5/8″ – 24 TPI
Length: 1.990″
Diameter: .865″
Weight: 2.3 oz.
Finish: Black Matte Melonite
- UPC: 811826021717
- MPN: TR-ATFH-68
20 months ago
Product Number: WE48972
The Weaver 2-Piece Grand Slam Steel Dovetail Base is constructed with an eye on durability and strength, providing you a piece that will last a lifetime. These bases are comprised of steel and able to withstand heavy use and recoil.
The mounting system comes in two pieces for better adjustment and features the locking dovetail system to ensure you have the most secure fit on your locking rings. You will find the alignment on your scope will hold up longer with this stable mount.
- 110, 112, 116 (Long Actions); 210 Shtg (use X-high rings) Pre 2003 Models
- UPC: 076683489722
- MPN: 48972
20 months ago
6-position Mil-spec Diameter Receiver Extension Tube for AR15 Rifles
Extension Tube CNC Machined from 6061-T6 Aircraft Grade Aluminum with Precisely Rolled Threads for Durable Thread Engagement with Lower Receiver
Underwent the Tightest Tolerance Controls for a Secure Fit and Function with Various Collapsible Stocks
Includes Mil-spec 6-position Extension Tube, Recoil Buffer, Buffer Spring, Receiver End Plate, and Castle Nut
Proudly Designed and Made in USA
Specifications:
Material: Aluminum
Height: 1.45″
Length : 7.25″
Weight: 9.3oz
20 months ago
Polymer Stock Made from Impact Resistant High-strength Material in Black and Flat Dark Earth Color
Mil-spec Diameter Extension Tube Made from Aircraft Aluminum with Rolled Threads, Hard Anodizing Plus Flat Dark Earth Cerakote Finish for Best Corrosion and Wear Resistance
Built for Heavy-duty Operations with Tightest Tolerance Control
Stock Assembly Complete with Action Spring, Buffer Assembly, Tear-drop Ring and Castle Nut
Specifications:
Material: Aluminum/Plastic, Aluminum/Polymer
Weight: 16.9oz, 17.0oz
Color: Black, Flat Dark Earth
21 months ago
A quick and easy way to improve the fit of your AR upper and lower halves. Don’t be annoyed by wiggles and slop when you can get this cost effective solution to ensure a solid mating between your upper and lower. These are trimmable so you can dial in the right amount of tension while still allowing easy operation of the takedown pin.
- MPN: D047
21 months ago
Effective flash suppression, reduced muzzle rise, an integrated wire cutter feature, and a slick, no frills design come together in the 6315. Machined from incredibly durable 4130 bar stock steel, the effective flash hider provides a noticeable improvement on the traditional A2 flash hider in both flash suppression and muzzle rise compensation, without increasing muzzle blast. A slick nitride finish protects it from corrosion to give you a long lasting and durable option for your rifle.
Features:
1/2×28 threaded for 5.56/.223
4130 steel bar stock
Properly heat treated
- UPC: 682157948611
- MPN: 6315KM
22 months ago
The KAK AR-15 MIL-SPEC Castle Nut is 100% made in the U.S.A. from hardened steel for the durability and strength you'd expect. The narrower staking cuts allow the end plate to be staked into the castle nut for a worry-free installation.
Back
Specifications
Brand: KAK Industry
Platform: AR-15/AR-308
Type: Carbine Castle Nut
MPN#: KAK-NUT
- MPN: KAK-NUT
22 months ago
Anderson Manufacturing builds rifles, pistols, and parts utilizing the latest in computerized manufacturing. By keeping manufacturing in house, Anderson can offer quality, American-made products at an affordable price, backed by a limited lifetime warranty.
This Anderson Manufacturing lower receiver end plate includes twin sling loops for ambidextrous attachment of your favorite HK style snap hook or MASH hook equipped sling.
Back
Specifications
Brand: Anderson Manufacturing
Finish: Manganese Phosphate
Manufacturer.: Anderson Manufacturing
Material: Steel
Sling Mount: Snap Hook Loop
- MPN: AM-22
22 months ago
This Aero Precision Pistol Length Gas Tube is made from stainless steel and finish with a durable Melonite coating. Designed for AR-15 or AR-10’s with a rifle length gas system and includes a roll pin for installation.
Features:
- Pistol Length – 6.7”
- Stainless Steel with Melonite coating
- Includes roll pin
- Made in the U.S.A.
- UPC: 815421021387
- MPN: APRH100280C
22 months ago
,
by Dealer
MORIARTI AR-15/M4 CARBINE BUFFER - 3 OZCarbine lengthAR-15 / M4 Standard BufferBlack Finish3 oz weightMil-specMade in U.S.A.
MPN#: MAR-AR15-BUF-3
- MPN: MAR-AR15-BUF-3
22 months ago
Strike Industries Optimus Modular Weight Buffer allows shooters to customize the weight of their AR buffer using an adjustable system. By adjusting the buffer weight from H1 to H3, users can find the right recoil, increase their accuracy, and the reliability of their AR-15. Besides standard H1/H2/H3 weights this buffer can be adjusted to a wide range of preferred buffer weights in between.
- UPC: 708747548716
- MPN: SI-AR-OPTIMUS-WB
24 months ago
,
by Dealer
AR-15 Carbine Buffer SpringAR-15 Carbine Buffer Spring - BlackAR-15 all models compatibleCan be used for mil-spec or commercial modelsLength: 10.875"Net Weight: 1.8 oz.Color: BlackMax per order: 10
MPN#: AR-15CARBSPRNG
- MPN: AR-15CARBSPRNG
24 months ago
BLACKHAWK TRAVERSE TRACK BIPOD - 13.5-23''
About this item Robust tubular leg construction Sport type: Hunting Horizontal traverse for smooth target acquisition and tracking Pivot action for level shooting on uneven terrain Rapid-adjust lever lock Durable all-metal construction
International Buyers – Please Note: Import duties, taxes, and charges are not included in the item price or shipping cost. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding or buying.
- UPC: 648018171925
- MPN: 71BP11BK
25 months ago
$19.95
Stainless Steel Magazine catch with Aluminum textured button, Fits Ar15 / Ar10 lowers. Great way to accent your Ar-15 build with some extra detail.
25 months ago
Model Number : CURVED FINGER KNOB
Color : Black
Item Weight (lbs) : 0.181
Finish : Anodized
Make Model Fit : AR-15.Universal
Material : Aluminum
Item Length (Inches) : 7.250
Item Height (Inches) : 1.500
Quantity : 1
Item Width (Inches) : 0.375
Brownells sku: 430108945
MPN#: CH-004
UPC#: 810151870946
- UPC: 810151870946
- MPN: CH-004
25 months ago
RISE Armament is committed to quality and success, and you can see that in their weapons. All RISE parts are manufactured according to strict AS9100 and ISO9001 2008 certified procedures, and must pass stringent QA inspection before leaving their facility.
The RISE Armament Upper Parts Kit is a MIL-SPEC kit containing the small components necessary to assemble an AR-15 lower receiver.
Kit includes:
Forward assist
Forward assist spring
Forward assist roll pin
Ejection port door
Ejection port door spring
Ejection port door pin
C-clip
Weight 3 oz
- UPC: 853742008205
- MPN: 12002
26 months ago
Introducing the NoiseFighters CliffhangIR, an exclusive offering now available only at Primary Arms! Elevate your shooting experience with this high-performance mounting platform designed to enhance the functionality of your red dot sights, magnifiers, aiming lasers, and thermal imagers.
Primary Arms
519
26 months ago
,
by Dealer
Makes A Huge Difference From The Standard Springs That Produce 9-10 LBS Trigger Pull
Increases Your Accuracy In Minutes!
A Hard Trigger Pull Is One of The Largest Causes Of Poor Accuracy.
This Kit Is The Single BEST Low Priced Enhancement You Can Buy That Can Significantly Make Your Rifle Or Pistol More Accurate.
Best Priced AR-15 Enhancement To Your Accuracy You Can Make On Any Gun
Same Exact Spring Material As Other Companies Use At 1/10 The Cost
Reduce Your AR-15 To 4.5-5.5 LBS Last A Few Minutes.
Also still fires hard primers such as 7.62x39 or 5.45x39
MMC Armory
580
26 months ago
Weight 0.48 oz MPN D2-J089-0000 UPC 1313
SKU: 1313
Quality Mil-Spec AR-15 Safety Selector
AMERICA Made
- UPC: 000020890000
- MPN: D2-J089-0000
27 months ago
Material: Polymer
Height: 0.91"
Length : 3.3"
Weight: 0.6oz
Color: Black
- UPC: 717385555983
- MPN: RBT-TKSDC
27 months ago
Description
Our USA made end plate allows the attachment of slings with quick detach sling swivels. Composed of a full steel construction, it is compatible with both Mil-Spec and Commercial buffer tubes.
QD Sling Swivel Not Included
Weight 0.0000 oz MPN
MAR078-S
Brand
nbs
SKU: 1636
- UPC: 811261028142
- MPN: MAR078-S
27 months ago
Patented monopod/reloading aid now available for the Gen M3 PMAG® from Magpul. New enhanced ergonomic shape includes a secure docking slot for the 1-pc NANO® or NANO2 made by Multitasker® (tool sold separately).Molded from fiber reinforced nylon for incredible durability and features a grippy TPU base pad for improved traction when used for prone support on a hard or slick surface.
Compatible with Gen M3 PMAG®
Field expedient monopod for enhanced prone stability
Ergonomic shape for improved grip
during reloading
SPACEFRAME docking slot for Multitasker
NANO/NANO2 tool (sold separately)
- UPC: 860002853727
- MPN: 88663
27 months ago
,
by Dealer
Enhance your firearm customization endeavors with the PF940C Jig Kit, now offered at Omega Tactical Distribution. This top-tier kit from Polymer80 is a game-changer for gun enthusiasts and professionals seeking to craft their compact pistol frame. Engineered with precision and built to exacting standards, the PF940C Jig Kit is a must-have companion for your DIY firearm project. Developed by the renowned experts at Polymer80, this kit ensures a seamless and straightforward experience, regardless of your skill level.
- MPN: P80-JIG-C
27 months ago
Sig Sauer P320 FCU Black Features The P320 FCU is part of Sig Sauer's renowned Custom Works Fire Control Unit series, offering an exceptional platform for those looking to tailor their firearm to their needs. The sleek black nitride finish and titanium frame provide durability and elegance. The flat face, skeletonized trigger ensures a consistent and responsive action, enhancing the shooting experience. As a plug-and-play unit, it's designed to fit seamlessly with other Sig P320 parts, allowing for customization and adaptability.
- UPC: 798681625970
- MPN: 8900161
27 months ago
This scope mount is part of the mid-tier optics line called GLx. GLx brings premium technology and materials into an approachable price range.
- UPC: 818500015819
- MPN: 910090
28 months ago
4923-SB
Omega Manufacturing AR-15/M16
Ambidextrous Sling Adapter End Plate
Increases Sling-Attachment Versatility on Collapsible-Stock Rifles & Carbines
- MPN: 4923-SB
28 months ago
For protecting a valuable select-fire receiver, or even a semi-auto receiver that has seen a high volume of fire, these non-rotating trigger and hammer pins are a must. Anti-creep retainers keep the pins from constantly rotating during extended firing sessions and weakening the receiver walls.
SPECIFICATIONS
BrandKNS Precision
Diameter.154
FinishManganese Phosphate
ManufacturerKNS Precision
MaterialStainless Steel
PlatformAR-15
SKU: NRTHPMOD2-154-Black
- UPC: 851876003097
- MPN: NRTHPMOD2-154-Black
28 months ago
United Tactical AR Gas Block & Tube Combo InstalledThe United Tactical AR Gas Block Tube Combo is an all-in-one package designed to save time and hassle during installation. The kit includes a low-profile gas block and a gas tube that are pre-installed together, eliminating the need for extra tools and steps in the assembly process. The gas block is precision machined from high-quality steel and features a durable nitride finish, while the gas tube is made from stainless steel for long-lasting performance. With a size of .750 inches, this combo is compatible with most AR-15 platforms.
- MPN: AP-06210
28 months ago
,
by Dealer
.750 Low Profile Aluminum Gas Block with Roll Pins & Wrench - Gold.750 Low Profile Aluminum Gas Block with Roll Pins & Wrench - GoldMil-Spec dimensions.750 diameterAluminum constructionAnodized GoldIncludes roll pin, 2 set screws and allen wrenchNote: Not designed for bull barrelsFits: AR .750" barrels
MPN#: 750-GB-GOLD
- MPN: 750-GB-GOLD
28 months ago
Description
Mil-spec AR-15 Bolt Catch
Weight 0.32 oz MPN D2-K011-0000 UPC D2-K011-0000
SKU: 1301
- UPC: 000020110000
- MPN: D2-K011-0000
28 months ago
The C-Series Bolt Catch is manufactured to CMMG's specifications and is intended for use with a CMMG rifle. Using a standard AR-15 bolt catch can create problems with lock back when shooting short round steel shots, bolt catches should not be considered an integral part of an AR-15 bolt catch system as a wear item or a functional part of a bolt catch system. Wear your bolt catch in the same location that you intend to fire it, not at the front of your receiver.
- UPC: 810046234754
- MPN: 55CA56D
28 months ago
The P365 Custom Works Fire Control Unit (FCU) brings an unprecedented level of customizability and personalization to the micro-compact carry platform. From grip modules, magazines, custom slides, barrels, optics, and accessories, you can configure your P365 in thousands of different ways to personally customize your pistol to your specific carry needs.
FEATURES
Exclusive Titanium Nitride Frame
Titanium Nitride Trigger
Custom FCU Serial Number
Compatible with all 9mm P365 accessories
- UPC: 798681659548
- MPN: 8900164
28 months ago
,
by Dealer
Want to see ALL of our Gun.Deals Exclusive Prices?
CLICK HERE TO CHECK OUT ALL THESE DEALS
INCLUDES:
1 pistol length tube diameter 1.25"
1 recoil spring
1 castle nut
1 recoil buffer (3oz)
1 ambidextrous sling end plate
*Buffer Color May Vary
Looking for a Coupon Code?! Use the Current Month and Year (ie: august2023) at checkout to save on your next order
Cannot Be Combined With Any Other Promotion Or Coupon Code
Did you Know That We Offer FREE Printable Range Targets
28 months ago
Anti-Walk locking pins replace your AR trigger and hammer pins to ensure pins do not rotate or vibrate loose out of the receiver. This is a popular, inexpensive and drop-in enhancement for tactical, hard-use guns and full auto firearms. These pins are compatible with a standard USGI style AR style lower receiver with standard GI trigger pins of .154 diameter regardless of caliber, including 7.62/.308 length AR receivers.
Specifications for Wilson Combat Anti-Walk Hammer/Trigger Set Pins:
Manufacturer: Wilson Combat
Condition: New
C0-ART-AWHMM-TR-AWP-B
- UPC: 810025500573
- MPN: TR-AWP-B
28 months ago
Replaces factory trigger guard and the oversized opening offers full access to the trigger, including gloved hands. Polymer trigger guard held in place with included standard roll pinsSpecsWeight: 0.15 ozMaterial: PolymerSKU: STAG300286FAQThere are no FAQ for this item
- MPN: STAG300286
28 months ago
This is a slide completion kit for gen3 glock 19. Works with polymer80 / p80 builds also. Includes all the small upper parts for your g19 slide (except sights/barrel)
28 months ago
,
by Dealer
Want to see ALL of our Gun.Deals Exclusive Prices?
CLICK HERE TO CHECK OUT ALL THESE DEALS
*BLEMISHING on this product is that the Guide Rod is a little longer than normal, your handgun will remain functional and won't have any issues cycling. The extended length of the guide rod will not allow you to install a compensator or muzzle device on your Glock/Glock Compatible handgun.
INCLUDES:
Firing pin
Firing pin spring
Firing pin spring cup
Firing pin safety
Firing pin safety spring
28 months ago
Radical Firearms standard A2 style flash hider. Threaded 1/2x28 with Nitride finish
BrandRadical Firearms
FinishSalt Bath Nitride
MaterialSteel
Suppressor MountA2 Mount
Thread Pattern1/2 X 28
TypeFlash Hider
SKU: RF-A2FH556
- MPN: A2FH556
28 months ago
Buffer Tube Kits:
Recoil Technologies End Plate w/ QD Sling Swivel POint
Upgrade your firearm with the J&E Machine Tech Standard Receiver End Plate, a must-have accessory that brings ambidextrous versatility and enhanced functionality to your setup. Crafted from durable steel, this end plate is designed to withstand rigorous use and provide a rock-solid foundation for your firearm components.
Recoil Technologies Mil-Spec Heavy-Duty 6-Position Buffer Tube
Recoil Technologies Mil-Spec Heavy-Duty 6-Position Buffer Tube
KAK Industry LR-308 Carbine Recoil Spring for Collapsible Stock
Davidson Defense
175
29 months ago
,
by Dealer
Recoil Technologies .223/5.56 1/2x28 TPI Linear Muzzle Brake Nitride
- MPN: MZ1020
29 months ago
,
by Dealer
$5.99
Combo Deal Sling Combo featuring the Omega MFG Single Point Bungee Rifle Sling - Black +
US Tactical Ind. AR-15 Ambidextrous Sling End Plate
Special Buy Item - Coupon Codes Not Valid With This Product
This combo features an Omega Manufacturing Single Point Bungee Rifle Sling is all black, that is both comfortable and durable.
Davidson Defense
188
29 months ago
,
by Dealer
MIL-SPEC HEAVY DUTY 6 POSITION BUFFER TUBE KIT
Now Higher Quality !!
This Exact Kit Is Used By Over 25 Major AR-15 Manufacturers
For Their OEM Choice Part Set Used For All Of Their Guns
So Pick The Buffer Tube Kit So Many Gun Manufactures Have Chosen For Their Guns.
This Kit Is Supplied to over 9% of all of the United States Production Made AR-15 Rifles
The Most Of Any Buffer Tube Kit Made
-
6 Position Aluminum 7075-T6 (buffer tube) Machined to Mil Spec Dimensions
-
Made From 100% 7075-T6 Aluminum
-
Black Recoil Buffer OR Gold
-
3.0 oz. buffer
-
Davidson Defense
1188
