NBS
NBS models
UPC:
009999919251
MPN:
19251
Caliber:
223/5.56
Capacity:
30
Type:
Rifle
Other products
UPC:
004285562017
MPN:
428-B556RGVNT2017(M)
Caliber:
5.56 NATO
Type:
Barrel
Manufacturer:
NBS
User posted deals for NBS
(348 deals found)
Filter
12 months ago
DISCLAIMER:
This product is not manufactured, authorized, endorsed, or warranted by GLOCK. GLOCK does not warrant or represent that this product is compatible with GLOCK pistols.
Description
The NBS Glock 43 Lower Parts Kit comes with all of the lower parts that you need to complete your G43 frame. This lower parts kit is comprised of US Made Parts.
G43 lower parts kit consists of:
- Trigger w/ Bar
- Trigger Housing
- Trigger Spring
- 5.5lb Trigger Connector
- Trigger Pin
- Trigger Housing Pin
- Locking Block Pin
- Slide Lock & Spring
- Magazine Catch & Spring
- MPN: 9023
12 months ago
The BRD 20" 5.56 NATO 1:9 Twist Phosphate Rifle Lightweight Barrel is built for shooters who demand reach, accuracy, and reduced front-end weight. Made in the USA by top-tier partners under ISO-9001 or better standards, this barrel is part of BRD’s commitment to delivering unmatched value and consistency. Its mag phosphate finish offers enhanced wear resistance, while the lightweight profile helps reduce fatigue during extended sessions.
12 months ago
The BRD 20" 5.56 NATO 1:9 Twist Phosphate Rifle Heavy Barrel is a long-range workhorse designed for serious shooters who demand strength, consistency, and accuracy. Manufactured in the USA by vetted Tier 1 partners under ISO-9001 or better quality control, this barrel is phosphate-coated for enhanced surface protection and long-term durability in the field.
12 months ago
Description
Mil-Spec AR-15 Charging Handle.
- Mil-Spec Style
- 6061 Forged Aluminum
- Hard Coat Anodizing
- Fits: AR-15
Weight 0.0000 oz MPN
XDB-CHGHA
SKU: 4081
- MPN: XDB-CHGHA
12 months ago
A quality upper assembly without cutting corners. This means starting with a top tier mil-spec forged upper receiver, using a nitrided steel gas block as opposed to phosphate or aluminum, quality American Made M-LOK handguards and one of the nicest nitrided A2s you’ll find anywhere. This also means taking the time to ensure that the upper will function reliably. We use Permatex 242 on key components while using mil-spec AEROSHELL 33MS Anti-Seize grease on the properly torqued barrel nut and muzzle device.
- MPN: 20433
12 months ago
Upper Parts Kit for Glock 17 - These Black Rifle Depot Upper Parts Kits for your Glock 17 are complete with all the parts replacement parts required to finish or upgrade your pistol slide. These kits for Glock 17 are compatible with generations 1 - 3 slides and have a lifetime warranty on all parts.
Kit Includes:
Recoil Spring
Channel Liner
Extractor
Firing Pin
Spring Slide Cover Plate
Extractor
Depressor Plunger Spring
Spring Loaded Bearing
Firing Pin
Firing Pin Spring
Spacer Sleeve
Firing Pin Spring Cups
MPN: 9530
- MPN: 9530
12 months ago
NBS Assembled Upper Receiver
Looking for a top quality Upper Receiver at wholesale prices? Building off of our Best-Selling, 5-Star Rated, NBS Stripped Upper Receiver, the NBS AR-15 Assembled Upper is machined by one of the foremost manufacturers of mil-spec AR-15 components, and then has a Mil-Spec Upper Parts Kit installed, right in America. Normally these assembled uppers are only available to builders when purchased from a name brand at a substantial markup, but we’re making these available at wholesale prices.
Features:
7075-T6 Forged Aluminum
Black Anodized finish
Flat-Top
AR15Discounts
299
12 months ago
The Mil-Spec 4-Position Micro Stock is the retro production of the Colt Fiberlite CAR SOPMOD stock found on the BLOCK 1 M4A1 carbine.
Mil-Spec fitment
Compact and light-weight originally designed for SOPMOD BLOCK 1 M4A1 CQB multi-purpose rifle
Precise fitment eliminates excessive wobble movement for weapon stability and accuracy
4 position
Impact-resistant, high-strength polymer
Made in the USA
Weight: 4.60 oz
Length: 6.18 inch
SKU: 117221
- UPC: 009999924201
- MPN: 24201
12 months ago
,
by Dealer
Here at AR15Discounts.com we work with a wide variety of machine shops and barrel manufacturers. When we come across a barrel maker we like, we will often decide to private label those barrels for resale under the NBS brand. We purchase these barrels in large quantities and then pass the savings on to our customers.
Why buy an NBS Brand Barrel:
American Made – Sourced from a variety of Tier 1 Manufacturers here in the United States
Quality Control – All barrels are manufactured under ISO-9001 or better quality standards
12 months ago
Description
Right here is a True Mil-Spec BCG. This unit is for builders who prefer tried and true manufacturing and aggressive quality assurance testing over fancy coatings, proprietary profiles and laser engraved logos.
Bolt
- Machined from Carpenter Technology No. 158 alloy.
- Heat treated
- Shot peened per ASTM B851/SAE AMS2430S
- Individually High Pressure Tested (test fired)
- Individually Magnetic Particle Inspected
- Manganese Phosphate Finish
Extractor
- Tool Steel Extractor
- Black Nitride Finish
- Mil-Spec O-Ring
Carrier
- MPN: 5877
12 months ago
SKU: 1563
Description
Designed to fit MILSPEC buffer tubes. The NBS SOPMOD stock features an excellent cheekweld for optimum shooting positioning. Within the buttstocks frame are two water tight storage compartments for small items. The rubber butt pad provides a non-slip surface for consistent shoulder and cheek placement.
Mil-Spec buttstock for AR15 and other models
Rubber non-slip butt pad
Two watertight storage compartments
Stainless steel QD swivel mount
Made in the USA
Available Colors: Black, Tan
Additional information
Weight 16 oz
MPN PS-ST7T
UPC 1563
- MPN: PS-ST7T
12 months ago
The BRD 20" 5.56 NATO 1:9 Twist Phosphate Rifle Lightweight Barrel is built for shooters who demand reach, accuracy, and reduced front-end weight. Made in the USA by top-tier partners under ISO-9001 or better standards, this barrel is part of BRD’s commitment to delivering unmatched value and consistency. Its mag phosphate finish offers enhanced wear resistance, while the lightweight profile helps reduce fatigue during extended sessions.
12 months ago
,
by Dealer
The NBS M-LOK AR-15 ASAL handguard keeps weight to a minimum while maintaining excellent strength and heat dissipation, with convenient M-LOK accessory compatibility and an interrupted M1913 Picatinny rail for attaching iron sights. By minimizing weight, this handguard prevents the rifle from becoming front-heavy, improving handling. This 15″ AR-15 handguard is constructed from 6061 aluminum and features a rugged hardcoat anodized black finish.
Features:
Free-float AR-15 handguard
Handguard length: 15″
Material: 6061 aluminum
Durable hard coat anodized black finish
- UPC: 000000026972
- MPN: 26972
13 months ago
A quality upper assembly without cutting corners. This means starting with a top tier mil-spec forged upper receiver, using a steel gas block as opposed to aluminum, quality American Made M-LOK handguards (handguard style may vary) and one of the nicest nitrided A2s you’ll find anywhere. This also means taking the time to ensure that the upper will function reliably. We use Permatex 242 on key components while using mil-spec AEROSHELL 33MS Anti-Seize grease on the properly torqued barrel nut and muzzle device.
13 months ago
Description
Mil-Spec Style M4 Carbine / USGI Polymer Collapsible Stock
These stocks come from multiple manufacturers. Therefore, the style may differ from batch to batch, which can result in differences including: not having a buttpad or having a QD mount, among other variations.
Additional information
Weight 11.2 oz
MPN AR15-M4-Stock
UPC 812530025527
- UPC: 812530025527
- MPN: AR15-M4-Stock
13 months ago
The NBS M16 bolt carrier group is the perfect BCG for your next build and is compatible with any AR15 build. The PVD coating by Ionbond provides a very low coefficient of friction while providing a unique look and increased reliability. Properly built, no corners cut.
MPN 10288
Bolt Material 9310 Steel
Cartridge Compatibility .223/5.56 NATO/.300 BLK
Finish Chameleon PVD
Carrier Profile M16
Magnetic Particle Inspected
Magnetic Partical Inspected
Platform AR-15
Bolt Finish Salt Bath Nitride
- MPN: 10288
13 months ago
Description
Mil-spec AR-15 Forward Assist & Dust Cover Upper Parts Kit sourced from Top Tier Supplier of Military and OEM Manufacturers.
Forward Assist Assembly Kit includes:
- Forward assist assembly w/ tool steel prawl
- Spring
- Installation roll pin
Port Door Kit includes:
- Ejection Port Cover Door (Dust cover)
- Steel Spring
- Steel Rod
- C-Clamp
- Fits: AR-15
Brand
nbs
SKU: BUNDLE-NBSU
AR15Discounts
292
13 months ago
Here at AR15Discounts.com we work with a wide variety of machine shops and barrel manufacturers. When we come across a barrel maker we like, we will often decide to private label those barrels for resale under the NBS brand. We purchase these barrels in large quantities and then pass the savings on to our customers.
Why buy an NBS Brand Barrel:
American Made – Sourced from a variety of Tier 1 Manufacturers here in the United States
Quality Control – All barrels are manufactured under ISO-9001 or better quality standards
- MPN: 26896
13 months ago
Description
Mil-spec AR-15 / AR-308 Forward Assist Assembly Kit sourced from Top Tier Supplier of Military and OEM Manufacturers. Features a tool steel forward assist pawl and press fit and pinned cap.
Includes forward assist assembly, spring, and installation pin.
Weight 0.8 oz MPN FAGC-0015 UPC 3134
SKU: 3134
- UPC: 000000003134
- MPN: FAGC-0015
13 months ago
Weight 35 oz Barrel Finish
Nitride / Melonite
Gas System Length
Pistol
Barrel Length (inches)
7.5
Barrel Chamber
300 BLK
Twist Rate
1-8
BCG / Charging Handle
Not Included
UPC 3331
SKU: 3331
AR15Discounts
275
