AR15 Rifle Deals, AR15 Rifle Parts, AR Rifle Kits, AR15 Lowers and Upper Receivers

(10,906 deals total)

Description

The LaRue Tactical MBT-2S AR-15 Trigger with Straight Bow (MBT-2S-SB) is designed for precision and performance. It features a flat-faced trigger preferred by precision and competition shooters, offering better control and faster shots. Constructed from solid S7 tool steel using CNC machining, this trigger features a 4.5-pound pull weight and a positive reset. It can easily replace the stock trigger in AR10/AR15 lower receivers and includes an extra "heavy" trigger spring for a 6-pound pull if desired. Features: - Flat-faced trigger for improved control and quicker shots

Don't Spend a Fortune! Available ONLY at Brownells Geissele and Brownells have teamed up to offer two unique triggers that give you the best performance at the best price! As one of the oldest and largest distributors of Geissele products, we had the unique opportunity to sit down with them to spec out two AR-15 triggers that wring out every bit of the performance Geissele is famous for. We also wanted to deliver them at a price point that won't make Geissele fans wait until a Black Friday sale to upgrade their current trigger!

SKU 5655102565 Brand Palmetto State Armory Model Number 5655102565 UPC 5655102565 DETAILS Barrel Length: 8" Gas System: Blowback Barrel Profile: A2 Barrel Steel: 4150V Chrome Moly Steel Barrel Finish: Nitride Chrome Lining: None Muzzle Thread: 1/2-28 Chamber: 9mm (9x19) Twist Rate: 1 in 10" Barrel Extension: Blowback Diameter at Gas Block: N/A Gas Block Type: N/A Muzzle Device: Birdcage Flash Hider Receiver Material: Forged 7075 T6 Receiver Type: AR-V Slick Side Upper Handguard Type: PSA 7" Lightweight M-Lok Bolt Carrier Group Included: Yes Bolt Steel: 8620

AR15 mil-spec upper receiver 16" m4 Contour 4150 Chrome Moly Barrel (Parkerized) .223 Wylde chamber (shoots 5.56 and .223) 1:8 Twist .750 Gas Block Carbine Length Gas System M4 Feed Ramps Dust Cover, Forward Assist 7075-T6 Aluminum Upper Receiver Free Float Aluminum Quad Rail A2 Flash Hider, 1/2-28 Threads Note: May or may not have some cosmetic blemishes. (scuffs, scratch in finish, tool marks, etc.)  Some blem 10" rails are slightly wider than normal, Most accessories fit ok, but some may not. It's better than a plastic handguard!     Item #: 16blemno

Manufacturer: Moriarti Armaments MA-9 9mm Billet Lower designed to use Glock®-style magazines. Non LRBHO. Machined from Billet 7075 T6 forgings and then hard coat anodized, these lowers are purpose built to accept 9mm Glock®-style magazines. The lower is completely assembled with a propitiatory magazine catch and ejector and all your standard AR-15 lower parts. This lower is finished off with Shockwave Brace and Kak industries pistol tube. 9MM buffer is included. THESE LOWERS WORK GREAT WITH ANY MIL SPEC GLOCK STYLE UPPER ASSEMBLIES! FFL Terms and Conditions

This is a kit for an AR 9MM Pistol Build. Comes with Built Upper Assembly (USA Made Upper, 4" Quad Rail, and Muzzle Brake) Shockwave ATF approved Pistol Blade , and Every Upper Build is Test Fired Before Shipment To Guarantee Performance. We do not guarantee cycling with all ammunition due to vast differences in the quality of ammunition. We will not warranty cycling with imported, steel cased or reloaded rounds. Chambered: 9mm Barrel: 4.5" 1:10 Twist 4150 Chrome Moly Steel Barrel Black Nitride Threaded 1/2x36 Rail: 4" Quad Rail Handguard w/Barrel Nut

Helius Tactical Stainless Seventeen Seventy Six Brake Our most patriotic brake, designed with quick American manufacturing in mind. All devices come standard with a free Stainless steel crush washer MilSpec 416 Stainless

MAGPUL MOE PISTOL GRIP | USA MADE $19.95 +Free Shipping Drop in upgrade fro AR15/M16 Pistol Grip One piece reinforced polymer construction Storage care capability accepts optional cores Designed to improve ergonomics Aggressive texture for positive weapon control MADE IN THE U.S.A COLOR OPTION: -Black -FDE -OD GREEN (Color may vary slightly from picture posted)

16" m4 Contour 4150 Chrome Moly Barrel .223 Wylde chamber (shoots 5.56 and .223) 1:8 Twist .750 Gas Block Carbine Length Gas System M4 Feed Ramps Dust Cover, Forward Assist 7075-T6 Aluminum Upper Receiver Free Float Aluminum Quad Rail (cutouts may be circles or slants) A2 Flash Hider, 1/2-28 Threads Bolt carrier group, charging handle, barrel and free float rail mods available in check boxes & drop down menus on product page. $10 Flat rate shipping!

Overview M&P15 Rifles are the ideal modern sporting rifle. Built to perform multiple uses under various conditions, M&P15 Rifles are as versatile as they are reliable. Engineered for a wide variety of recreational, sport shooting and professional applications, M&P15 Rifles are easy to accessorize, but hard to put down. M&P15 Rifles are lightweight and rugged embodying the best combination of function and form. Features • 14.5” barrel with 1 in 7” twist and fixed Vortex Flash-Hider for overall length of 16.1" • 13” Troy® TRX Extreme Handguard

Add to Cart for discount from $53.10 to $48.00 and free shipping! SureFire ProComp 300/308/762 Muzzle Brake | 5/8-24

The Del-Ton Echo 316 M-LOK AR-15 is a step above the basic entry level rifle. This quality modern sporting rifle is equipped with a full complement of Magpul furniture, including the latest MOE M-LOK handguard, MOE pistol grip and trigger guard, and an MOE stock. The flat top receiver is rail equipped to accept your choice of optics or rear sight. Just load up the included Magpul PMAG and you are ready to go! Specifications and Features: 5.56 NATO (accepts .223 Remington) Direct impingement gas operated semi automatic Carbine length gas system 16" barrel 1:9" twist

Noreen Firearms 80% AR-15 Forged Lower Receiver Tumbled in ceramic media — Ready for blasting and your choice of firearm coating once you complete the machining Precision broached magazine well with beveled feed lips Compatible with all standard AR-15 components and magazines and most aftermarket parts Manufactured to MILSPEC on state of the art CNC equipment for consistent quality parts and exacting tolerances Save money by building your own AR-15 rifle from the ground up exactly the way you want it configured Model: 80% AR-15 Type: 80% AR-15 Lower Receiver

28 Round 7.62 x 39 Stainless Steel New Smaller Profile - fits standard size 30rd USGI magazine pouches Matte Black Finish with Black Teflon Coating Black Follower 6.5 oz. Made in the U.S.A. 100% Manufacturer's Warranty Most reliable 7.62x39 magazine on the market today North River Distributors, LLC does not ship high capacity magazines to CA, CO, CT, Chicago IL, DC, MA, MD, NJ, and NY.

The USR series suppressors are designed to fill a law enforcement and civilian home defense roll on the AR-15 and M-16 platforms. With its no frills exterior and highly engineered internals the URS series suppressors strike a perfect balance between performance, durability and price. Made from 4150 CrMV ordinance grade steel URS suppressor are full-auto rated down to 10.5″ barrels are are designed to endure sustained strings of fire.

16" m4 Contour 4150 Chrome Moly Barrel (Parkerized) .223 Wylde chamber (shoots 5.56 and .223) 1:8 Twist .750 Gas Block Carbine Length Gas System M4 Feed Ramps Dust Cover, Forward Assist 7075-T6 Aluminum Upper Receiver Free Float Aluminum Quad Rail A2 Flash Hider, 1/2-28 Threads M16 Black Nitride/Melonite MPI bcg and charging handle

AR-10 .308 16" Premium Tactical Commando Carbine Kit - DPMS Compatible. This kit contains all components to complete your AR-10 project. The kit comes WITHOUT 80% lower receiver. All options and modifications to your kit are available on top of this page. All components are carefully chosen to fit DPMS lo pro .308 pattern and made in the USA. DPMS compatible. Standard kit includes all of the following high quality parts: Barrel: 16″ CMV, SOCOM CMV (lightweight) Chamber: .308 Win Twist: 1 in 10” Thread: 5/8x24 .750” Gas Block Diameter Mid Gas System

Use COUPON CODE - NRD2OFF for $2.00 discount on orders over $20 Sale extended to 3/31/18 10 Round Stainless Steel Magazines CPD -- 5 Round Stainless Steel Magazines CPD -- .223/5.56 -- 7.62x39 -- 6.5 Grendel -- 6.8 SPC Matte Black Scratch-proof Finish -- Orange Anti-tilt Follower .223/5.56 -- 17-7 Stainless Steel Wire Spring -- 3.20 oz. -- Made in the U.S.A -- 100% Manufacturer's Warranty -- Item #: C10223SBO -- C Products Defense is the magazine of choice of Sig, Smith-Wesson, Remington, Bushmaster, Ruger, PWS, military and law enforcement.

Aluminum 5 slot sectional attachment designed for use with all M-LOK compatible hand guards. Allows the attachment of various 1913 Picatinny spec rail-mounted accessories such as lights, vertical grips, etc.

28 Round 6.5 Grendel Stainless Steel Matte Black Finish with W.E. Birdsong Black T Teflon Coating (exclusively for C Products Defense) Blue Follower 17-7 Stainless Steel Wire Spring  5.76 oz Made in the U.S.A. 100% Manufacturer's Warranty North River Distributors, LLC does not ship high capacity magazines to CA, CO, CT, Chicago IL (Cook County), DC, MA, MD, NJ, and NY.

Product Number: CK72602 Product Title: 1X25 MULTI-TAC 30MM TUBE RED/GRN Shipping Weight: 0.73 lbs. This Center Point Multi-TAC Quick Aim Red/Green Dot Sight - 1x30mm Multi-Reticle Matte was designed for speed and ease of use. Because of the unique design of this sight, shooters can aim with both eyes open for a much larger field of view and more accurate shot.

Ghost Firearms AR-15 7.5" 300 Blackout Barrel 4150 Chromoly Steel Light HBar Profile M4 Feed Ramps 300 Blackout (7.62x35) Markings Spiral Engraved Near Break Pistol Length Gas System 1:8 Twist .750 Gas Platform System Black Nitride Coating 5/8 by 24 Thread

Valentine Day Sales! Kit included 80% Lower, Upper and 15″ Keymod rail with mounting accessories. Blemished – minor scratches, hardly noticeable. Anderson Upper (sport version without forward assist and dust cover) and 80% lower. Forged 80% Machined Lower and Upper. Material is 7075-T6. Fully machined to mil-spec tolerances. Bead blasted and anodized in PINK locally here in San Jose, CA. No more color mis-matching, get the DYI set for a perfect color build in pink.

AR-15 5.56/.223 16" M4 KEYMOD UPPER ASSEMBLY WITH SLIP OVER BARREL SHROUD CA and NY compliant. Action: Semi-auto Gas System: Carbine Length Gas System Chamber: 5.56 NATO/.223 Wylde Twist Rate: 1/8, button rifled Muzzle Device: Slip over barrel shroud with multi port muzzle brake, 1/2x28 Barrel: 16" M4 contour, 416R steel, stainless steel, M4 feedramps, .750 gas block diameter Handguard: Rifle-length Keymod Free Float A3 flat top upper receiver - Made from certified 7075-T6 aluminum forgings, black hardcoat anodized to gov. specs.; forward assist and dust cover installed

OverviewFeaturesNarrow design replaces carbine and mid-length factory handguardsCompatible with most piston-driven as well as 'direct impingement' gas systemsEasy to install utilizing existing delta ring and round front hand guard retaining cap with A2 front sight assembly*M-LOK slots at the two, six, and ten o'clock positions for mounting MIL-STD-1913 Picatinny rails or other direct-attach accessoriesReinforced, heat-resistant polymer constructionIntegral riveted aluminum heat shieldFront lip and long side extensions shields hand from hot gas block The MOE SL Hand Guard from Magpul for AR15/M

Includes: Trigger Group A2 Grip Buffer Retainer Pin Buffer Retainer Spring Trigger Guard Safety Selector Bolt Catch Spring Detent Spring Bolt Catch Plunger Bolt Catch Magazine Catch Spring Bolt Catch Roll Pin Magazine Release Button 308 Magazine Catch 308 Pivot Pin Selector Spring Safety Selector Detent 308 Rear Take Down Pin Takedown Pin Detent

VALENTINE'S DAY SALE 5% OFF ANY ORDER with code : VDAY +Free Shipping! 2/12/18 - 2/15/18

- 7.5" 9mm Ar15 Barrel - Stainless Steel - 5/8-24 Threads - Made in USA Item #: 7.5-9mmSS

This is a lightweight 'pencil' profile ar15 barrel made from 4150 chrome-moly steel. It has a parkerized finish and a mid length gas system. This ultralight barrel will save a few ounces on your Ar15 rifle build. specs: - 16" Length - .223 Wylde Chamber (shoots both 5.56 and .223) - 1:8 Twist - 4150 Chrome Moly Steel - Parkerized finish - .750 Gas Block Diameter - 1/2-28 Threads - Mid-length gas system - m4 feed ramps - Weight: approximately 1.5 lbs As usual, made in USA.   

AR-15 SLIP OVER BARREL SHROUD WITH MULTI PORT MUZZLE BRAKE T6 Aluminum US Made Reverse Threaded 1/2 x 28 Thread Slips over Barrel And Threads On Dual Purpose Unit, Functions As A Barrel Shroud And A Muzzle Compensator! Multi Porting "Gatling Gun" Style Muzzle Comp Reduces Felt Recoil Up To 70 Percent .223/ 5.56 Cal

Complete, drop-in carrier/bolt assembly is ramped on the bottom to provide clearance for a factory .223/5.56mm hammer in your 9mm conversion. Eliminates the need to install a dedicated 9mm hammer, so the original fire control system stays intact for easier conversion back to original caliber. Precision machined from high-grade ordnance steel, the one-piece design combines bolt and carrier as a single unit to provide outstanding strength, durability, and reliability. Includes a staked-on carrier key.

30-Round-Blocked-to-10-Round Aluminum (USGI) Magazine Matte Black Scratch-Resistant Finish Anti-tilt Follower 17-7 Stainless Steel Wire Spring Blocking cannot be removed; magazine is physically crimped to prevent loading more than ten rounds FREE SHIPPING!  

Ghost Firearms AR-15 10.5" 5.56 Barrel 4150 Chromoly Steel Contour Profile M4 Feed Ramps 5.56/.223 Chambered in 5.56x45 Makings Spiral Engraved Near Break Carbine Length Gas System 1:7 Twist .750 Gas Platform System Black Nitride Coating 1/2 By 28 Thread 5.56mm Flash Can 1/2 by 28 Thread Black Anodized Ghost Firearms GFR11 and Upper Receiver 11" free float handguard MIL-STD 1913 Picatinny rail on top 5 M-Lok slot on 3 sides Multiple Quick detach Locations 6000 Series aluminum extrusion Made in-house (USA MADE) Clamp on system for easy assembly

KG AR15 Aluminium 7075 T6 Assembled Lower No Stock FEATURES: Made from a 7075-T6 Forged Aluminum Billet Produced using state of the art CNC machining FIRE/SAFE safety selector markings MIL-A-8625F Type 3 Class 2 Black Hardcoat Anodized Finish Marked Multi Cal The Bolt Hold Open Hole is threaded and comes with a bolt hold open screw, which allows for: Easier installation, no more driving a roll pin just use a 1.5 hex wrench Allows the user to remove the bolt hold open easily, handy when using a 9mm top down magazine adapter COMES INSTALLED WITH: Lower Parts Kit

2 - 30 Round .223/5.56 Aluminum USGI Magazines Black Teflon Finish -- Orange Anti-tilt Follower -- 17-7 Stainless Steel Wire Spring -- 4.00 oz. -- Made in the U.S.A. by C Products Defense -- All 30 round magazines meet or exceed Mil-Spec -- 100% Manufacturer's Warranty FREE SHIPPING! $3 less than if you ordered 2 at $8.95 each PLUS shipping. North River Distributors, LLC does not ship high capacity magazines to CA, CO, CT, Chicago IL, DC, MA, MD, NJ, and NY.

Ghost Firearms Vital 16" Upper Chambered in .300 Blackout (7.62x35) A2 Birdcage Flash Hider 16" 1:8 Twist 4150 Light HBar Barrel Black Nitride Pistol Length Gas System Ghost Firearms 11" M-Lok Free Float Hand Guard Ghost Mil-Spec 7075 T6 Upper Receiver Mil-Spec Hard Coat Anodized

AR-15 6.5 Grendel 18" stainless steel competition upper assembly, This drop-in 6.5 Grendel Type 2 upper will attach to virtually any standard AR-15 lower assembly. Available in 416R Stainless Steel threaded barrels or 4150 Steel Black Nitride Finish, with 1 and 8" twist and mid length slim keymod free float handguards.

1 of 1 9.20 inch hand polished Keymod lightweight rail. Made of T6 aluminum. This is a one off custom cut light wight rail. All polishing is done by hand. Features: One off piece 9.20″ Lightwieght Free Float Keymod Custom Cut Steel barrel nut

CMMG AR-15 Lower Parts Kit Gun Builder Kit 55CA601 The CMMG Gunbuilder Kit is a customizable lower parts kits for the AR-15 platform. This kit provides all the minor, mil-spec parts generally used in an AR-15 build, while still allowing the flexibilty to add common aftermarket upgrades, such as a pistol grip and match grade trigger components. Customizable lower parts kits offer an economical way to get all the small pieces needed for an AR-15 lower, without wasting money on the parts you won't use! Kit Includes: •Bolt Catch •Bolt Catch Plunger •Bolt Catch Roll Pin

In stock - The Magpul AR-15-M16 PMAG 30 Round Magazine is exceptionally rugged, combat- and competition-ready and functions flawlessly, even when left fully loaded for extended periods. The corrosion-proof, self-lubricating one-piece body of fiber-reinforced, molded polymer has no spot welds or joints to impair the follower, and the constant internal curve ensures smooth, unobstructed movement of the round stack. This Magpul AR-15-M16 PMAG 30 Round Magazine has anti-tilt follower stabilizes the stack to help prevent nose-diving and bolt-over-head failures.

Lowest price I've seen for one of these. Please note the description reads MPC model, but the manufacturer number indicates this is the flat top, or SRC model. No carry handle or front sites, optics ready. Non carbon reciever

These stocks are brand new in OEM/NON RETAIL PACKAGING. The Mission First Tactical MFT Battlelink Minimalist AR-15 Stock is the perfect aftermarket stock for your rifle. This stock is extremely light and is made of polymer. This stock gives you what you need in as small a package as possible, and comes in a black finish. It has an angled non-slip rubberized buttpad, which allows for faster weapon presentation. The quick detach sling mounting point is positioned for optimum usage including ambidextrous shooters, and the upper section provides enhanced cheek weld.

One of the most tested and proven weapons systems in the world achieves ultimate refinement with the introduction of the SIG516 rifle. With its chrome-lined, phosphated, military grade barrel and adjustable, four-position gas regulator, the SIG516 incorporates all of the most desirable mechanical improvements. Add to these a free-floating forend and barrel, and you have the most advanced, versatile AR-based rifle available. FEATURES • Gas piston operating system • Four-position gas regulator • 5.56 x 45mm NATO • Free-floating military grade chrome lined barrel

Windham Weaponry® SRC AR-15 5.56 NATO/.223 Remington Semi-automatic Rifle Maine-based Windham Weaponry has made it their mission to produce high-quality rifle. Behind each AR-15 is a team of dedicated individuals who are truly experts in the field, with years of experience. Each Windham Weaponry Rifle is designed with the best fit and finish, then built with the best materials, loaded with the best features, and finally, backed by an unbeatable lifetime warranty.

The next-generation PMAG 30 GEN M3 is a 30-round 5.56x45 NATO (.223 Remington) polymer magazine for AR15/M4 compatible weapons. Along with expanded feature set and compatibility, the GEN M3 incorporates new material technology and manufacturing processes for enhanced strength, durability, and reliability to exceed rigorous military performance specifications.

From the onset, Windham Weaponry has had one goal: to build the finest AR type rifles in the country. As "America's newest rifle manufacturer with decades of experience", we gathered a team of highly qualified and very experienced Gunsmiths and Builders, supported them with the best Customer Service & Sales people, added seasoned firearms industry Quality Control, Purchasing, and Marketing experts, and lead them with a Management team that has built "America's Rifle" for literally two decades.

Minimal-profile replacement for factory front sight/gas block won’t interfere with extended-length tactical forearms, while ensuring proper function of gas system for reliable cycling.

BACKORDER UNTIL WEEK OF 3/12/18 10 Round 7.62 x 39 Stainless Steel Gen II Updated Design Matte Black Finish Black Anti-tilt Follower 17-7 Stainless Steel Wire Spring 3.28 oz. Made in the U.S.A. by C Products Defense 100% Manufacturer's Warranty

http://www.doaarms.com/TRITON-MFG-7075-T6-Billet-Lower-Receiver-p/tr15.htm TRITON MFG 7075 T6 Billet Lower Receiver - $129 with free shipping Model TR15 Type: AR-15 Stripped Lower Receiver — milled from 7075 T6 aircraft grade aluminum billets Caliber: Multi (will accept any upper and/or caliber designed for the AR-15 platform) Magazine: Accepts any standard MIL-SPEC AR-15 magazine Weight: 10.4 oz FEATURES Machined from 7075-T6 aircraft grade billet aluminum Matte black hard-coat anodized per Mil 8625 Type 3 Class 2

Includes: Nickel Boron Trigger Group A2 Grip Buffer Retainer Pin Buffer Retainer Spring Trigger Guard Safety Selector Bolt Catch Spring Detent Spring Bolt Catch Plunger Bolt Catch Magazine Catch Spring Bolt Catch Roll Pin Magazine Release Button Magazine Catch Pivot Pin Selector Spring Safety Selector Detent Rear Take Down Pin Takedown Pin Detent

Forged 7075 T6 Aluminum Black Anodized M4 Feed Ramps Shell Deflector Forward Assist & Dust Cover Ready

Ghost Firearms 16" Rifle Kit With Ghost GFR 11" M-Lok Rail Chambered in 9mm 9mm Bolt Carrier Group (Colt and Glock cut) Mil-spec Charging Handle A2 Flash Hider 1/2 by 36 16" 1:10 Twist 4150 Chrome Moly Steel Barrel Black Nitride Colt Magazine Adapter Block Ghost 11" M-Lok Rail Mil-Spec 7075 T6 Upper Receiver with Hard Coat III Anodized Finish Mil-Spec Lower Parts Kit Ghost 9mm Carbine Buffer System A2 Pistol Grip

100-009-321WB AR-15 STR Stock Collapsible Mil-Spec BLK Color: Black Style: Collapsible Type: Mil-Spec Material: Polymer Adjustable Carbine Stock With Internal Battery Storage

Brand New ambidextrous charging handle. Anodizing in RED! Mil Spec for 5.56 & 223. Made of 6061- T6 Aircraft Aluminum. Ambidextrous tactical latch (Material: Steel) Left and right handed cocking/charging.

416r Stainless Steel m4 Contour Barrel - 16" Length - 1:8 Twist - .223 Wylde chamber (shoots 5.56 or 223) - 1/2-28 Threads - m4 feed ramps  - Expected accuracy: 1" grouping or better at 100yds, with match grade ammo.    - Made in the USA  Item #: 16ssm4brl

16" 9mm Lightweight Barrel 1-16 twist Melonite/Nitrided 4150 Chrome Moly 1lbs 6oz 1/2x28 threaded Works with Colt or Glock Made in the USA 9mm Linear Compensator 1/2x28 thread pattern crush washer is included Made in USA AR-15 and AR-9 Flat Wire Carbine Spring 17-7 ph steel for strength, reliability and longevity Will work with Carbine or Pistol buffer tubes Reduces twang noise Spring will increase bolt load to help feed Made in USA

Condition: Factory New Bud's Item Number: 719007720 MFG: NOVESKE

AR-15 16" 300 AAC BLACKOUT STAINLESS UPPER WITH THREAD PROTECTOR. New by Moriarti Armaments, CA and NY compliant. 300 blackout caliber uppers use your standard .223/5.56 bolt carrier group and magazines. No special bolts or magazines to buy to get into a new caliber! Just drop an upper on your standard mil-spec AR-15 lower, and you are ready with your new caliber. Barrel Length: 16" Gas System: Carbine Length Barrel Steel: 416R Stainless Steel Barrel Finish: Stainless Muzzle Thread: 5/8-24 Chamber: 300 AAC Blackout Twist Rate: 1 in 8" Barrel Extension: M4

Overview1YearMidwayUSA Exclusive Brand WarrantyThis AR-Stoner AR-15 223 Remington (Wylde) Barrel is perfect for competition where accuracy and reliability are imperative to a successful match. This medium contour barrel is made from 416R Stainless Steel and uses 5R Rifling with a 1 in 8" Twist. It is fluted along its length for greater stiffness, faster cooling and reduced weight. Additional features include a mid-length gas port, M4 feed ramps and 1/2"-28 threaded muzzle.

Spike's Tactical CRUSADER Stripped Lower Receiver w/ Integral Trigger Guard $89.99 with Coupon Code FREEDOM https://www.doaarms.com/ProductDetails.asp?ProductCode=SP-STLS022&CartID=1 The Spike's Tactical Crusader Stripped Lower is a special series lower featuring a Crusader logo instead of the usual ST Spider logo. Selector markings: Left Side: Pax Pacis/Bellum/Deus Vult Right Side: Peace/War/God Wills It

100-011-565WB AR-15 MOE Stock Fixed Mil-Spec BLK Color: Black Style: Carbine, Fixed Type: Mil-Spec Material: Polymer Description The MOE Fixed Carbine Stock provides a fixed, non-collapsing stock option for carbine length buffer tubes. The MOE Fixed Carbine Stock has a slim profile, improved cheek weld, and multiple sling attachment options, and is compatible with the ASAP Plate and PRS Extended Rubber Butt Pad. Installation is non-armorer and does not require the castle nut or lock plate to be removed. Uses the Magpul Type 1 QD Sling Mount. SKU#: MAG480BLK

Quick Overview SKU: 32839c UPC: MFR#: - Fixed length for standard mil-spec sized M4 Carbine receiver extension tubes (not included) from manufacturers such as Colt, LMT, Ruger, S&W, SIG, and others  - ~12.2” Length of Pull - Integrated 1.25” sling loops - Compatible with ASAP Plate & PRS Extended Rubber Butt-Pad - Durable polymer construction - Available left/right side push-button QD Sling Mount Kits (not included)

Colt's Stealth Grey LE6920 MPS Semiautomatic Tactical Rifle features an M4 chrome-lined barrel that has a 1:7 rate of twist, making your ammo choices virtually unlimited. Muzzle compensator lessens muzzle raise, keeping you accurate during rapid fire. Direct-gas-system action with locking bolt reliably and quickly feed shells. Magpul Gen2 MBUS® flip-up rear sight adjusts for windage and the MBUS front sight adjusts for elevation.