Enhanced Nickel Teflon Trigger Assembly. Our Enhanced Trigger assemblies are built on a traditional MIL-Spec foundation with some key upgrades for increased performance. All components are sourced from contractors that meet or exceed military specifications. Triggers and hammers are made from 8620 steel and properly heat treated. Trigger sear surfaces maintain correct geometry and are polished prior to heat treatment to ensure that surface hardened material is not removed. Triggers, hammers and disconnectors receive our proprietary electroless Nickel Teflon finish for increased lubricity and corrosion protection. The final step involves lightly buffing the Nickel Teflon on the trigger sear surface, giving the trigger a grit free pull and crisp break without compromising the base metal.
We’ve taken it a step further and hand selected hammer springs that keep the pull weight on the low end of the spectrum. Every single trigger assembly is checked with a pull gauge to ensure that pull weight is between 5 to 5 1/2 pounds.
All components are machined and heat treated to Mil-Spec
Mil-Spec geometry and reliability
Trigger sear surfaces are polished before heat treatment
Proprietary Nickel Teflon Finish
Nickel Teflon is lightly buffed, giving the trigger a grit free pull and crisp break without compromising the base metal
Springs are hand selected to produce a 5 to 5 1/2 Pound Trigger Pull
Trigger and hammer pins
Trigger, hammer, and disconnector springs