DNZ Mount System W/Med Rings For Remington 700 SA 30mm Tube - $38.07

Description

Made of Billit tempered 6061T6 aluminum. Machined one piece design. Installation requires no special tools. Perfect ring alignment - no lapping required. Full 1/2 inch thread length in rings. MOA Mounts are tapered down on front for long range shooting. Height will be about .03" lower on front ring than a standard mount. Base screws are 6-48 X 1/4" long. Ring screws are 6-40 X 5/8" long. Both use a 7/64" Allen wrench. Some of the .338 Lapua receivers have been modified at the factory and have larger base screws. The size of them is 8-40 and will use a 9/64 Allen wrench. Check your gun and see because the mount will have to be modified. Choose Model 700 (8-40 screws) if your gun uses the larger 8-40 screws. Short action - Outside to outside of rings is 4.26" for standard ring mounts. Standard rings are .63"" wide and have 2 ring screws per ring. Tactical rings are .80"" wide and have 4 ring screws per ring. 4 Hole to hole spacing dimensions are .86", 3.63", .60". Height of mounts from top of receiver to centerline of scope tube is - low .98", medium 1.11"", and high 1.23".

Features:

Precision machined from a solid block of top-grade billet 6061T6 aluminum
Custom made to fit each type of firearm and align perfectly with your rifle's receiver
No moving parts between the firearm and the scope
67% lighter than comparable one-piece mounts with four times the threads and precision socket-head cap screws for absolute strength and security
Absorbs shock and withstands temperature extremes better than steel mounts at a fraction of the weight
Made in the USA

Specifications:

Manufacturer: DNZ Products
MPN: 35700
UPC: 879956001283
1-Piece Scope Mount
Fits: Remington 700 Short Action, Remington model 721 and 722 & Bergara B14
Rings: 30mm Medium
Finish: Silver