.jpg)
Description
Complete shop-assembled and function-tested RMR-cut slide for Glock 19 Gen 3 frames, built and tested in our Florida shop. Aggressive knurled front and rear grips, a full-length black nitride barrel, and tall (suppressor-height) sights for optic co-witness — drop-in fit with no gunsmithing required.
Features
Knurled-grip stripped slide blank, black nitride finish — aggressive front and rear cocking grips
RMR footprint optic cut with cover plate for Trijicon RMR / SRO and compatible red dots (Holosun 407C, 507C, etc.)
3CR Tactical slide completion kit pre-installed (firing pin, extractor, plunger assembly, recoil rod, cover plate)
Full-length 9mm black nitride drop-in barrel — chambered in 9mm Luger
Tall (suppressor-height) polymer sights pre-installed and aligned — co-witness with most RMR-footprint red dot optics
Fully assembled and function-tested in our Florida shop — no gunsmithing required
Manufacturer Part Number: ASSM-G19-RMR-02AG-BN-TS
Specifications
Caliber: 9mm Luger
Compatible host: Glock 19 Gen 3 frames
Slide finish: Black nitride
Barrel: Full-length 9mm, black nitride (non-threaded)
Optic cut: RMR footprint
Sights: Tall / suppressor-height polymer
Optic mounting screws (not included)
If you are mounting a red dot, we recommend using the screws supplied with your optic kit. The RMR cover plate uses 6-32 × 1/3"; optic mounting uses 6-32 × 7/16". Most Trijicon, Holosun, and aftermarket kits include the correct length. Hardware is not included with this slide.
Break-in and care
Lube all slide rails and contact surfaces before first use. Run approximately 200 rounds of standard 9mm ammunition during break-in before moving to duty or self-defense loads. Confirm your lower is a Glock 19 Gen 3 pattern.
