Right To Bear Coupon Codes, Discounts and Deals

(686 deals total)

This BCG does not have forward assist serrations. Featuring our new Right To Bear Lightweight 5.56/.223 BCG, weighing in at approximately 8.8 Ounces, or 249.5 Grams for you lightweight build fanatics! Using our low mass Bolt Carrier Group creates less reciprocating mass moving back and forth inside the action, which reduces recoil significantly. Our lightweight carrier also allows proper cycling with less gas. When used in conjunction with an adjustable gas block & a reduced power buffer spring, you can tune the gas way down, which will reduce muzzle rise and carbon build up.

CINCO DE MAYO "EL GAUCHO" LIMITED EDITION AR15 ANODIZED 80% LOWER RECEIVER - FIRE / SAFE ENGRAVING - OPTIONAL ENGRAVINGS ^ These lowers come engraved with FIRE / SAFE on both sides of the receiver. This Anodized 80% Lower Receiver comes with a limited time Cinco De Mayo "El Gaucho" graphic engraved on the right side magwell and ships right to your door.

This Kit comes with everything you need to complete your Bolt Carrier Group other than the Carrier itself. These are perfect kits to complete your 7.62x39 AR15 build. It includes an enhanced firing pin for reliable primer ignition. Standard firing pins do not protrude far enough to reliably set off 7.62x39 primers. This is one of the major drawbacks of building a 7.62x39 AR15. Our enhanced firing pins are made to replicate the firing pin protrusion of an AK47 and eliminate this issue. No need for heavier hammer springs for reliable ignition. .125" bolt face depth Enhanced Firing Pin

This .300 Blackout chambered 16 inch barrel is machined from 4150 Chrome Moly Vanadium steel with a QPQ Corrosion Resistant Finish and QPQ coated M4 feed ramp extension.

Builder's Grade Complete 16" 9mm Upper Receiver | A2 | 15" M-LOK Handguard | Pistol Caliber | Black | With Bolt Carrier Group and Charging Handle This Complete 16 inch M-LOK upper receiver comes with a 15 inch free-float handguard and is built with only the best Mil-Spec components. The heart of this upper is comprised of a 4150 M4 barrel.

Barreled 16" 5.56 Carbine Upper Receiver | A2 | 15" M-LOK - Sniper Grey NO BCG OR CHARGING HANDLE INCLUDED This Barreled 16 inch M-LOK upper receiver comes with a 15 inch free-float handguard and is built with only the best Mil-Spec components. The heart of this upper is comprised of a 4150 M4 barrel. Barrel: Length - 16" Material - 4150 Chrome Moly Vanadium Finish - Parkerized Profile - M4 Contour Gas System Length - Carbine Length Gas Block Journal - .750" Twist Rate - 1:7 inches Muzzle - 1/2x28 Threaded Weight - 2.5 Pounds Other Info - M4 Feed Ramps Upper Receiver:

This Complete 7.5 inch M-LOK upper receiver comes with a 7.25 inch free float handguard and is built with only the best Mil-Spec components. The heart of this upper is comprised of a 4150 M4 barrel and our black nitride bolt carrier group that is finished with an incredible polish, making the action smooth and easy to keep clean. Barrel: 7.25" 5.56 4150 CMV Barrel - Parkerized M4 Carbine Profile - .750" GB Journal 1:7 Twist Rate - 1/2x28 Muzzle Thread Fitted with A2 Flash Hider Bolt Carrier Group: Enhanced 9310 Steel (Bolt) 8620 Tool Steel (Carrier)

Barreled 10.5" 5.56 Pistol Upper Receiver | A2 | 9" M-LOK - FDE NO BCG OR CHARGING HANDLE INCLUDEDClick here for Charging HandlesClick here for Bolt Carrier Groups This Barreled 10.5 inch M-LOK upper receiver comes with a 9 inch free-float handguard and is built with only the best Mil-Spec components.

Builder's Grade 5.5" 9mm Upper Receiver - Black | FLASH CAN | 7" M-LOK | Without Bolt Carrier Group and Charging Handle This 5.5 inch M-LOK upper receiver comes with a 7 inch free float handguard and is built with only the best Mil-Spec components.

This Complete 7.5 inch M-LOK upper receiver comes with a 9.25 inch free float handguard and is built with only the best Mil-Spec components. The heart of this upper is comprised of a 4150 M4 barrel and our black nitride bolt carrier group that is finished with an incredible polish, making the action smooth and easy to keep clean. Barrel: 7.25" 5.56 4150 CMV Barrel - Parkerized M4 Carbine Profile - .750" GB Journal 1:7 Twist Rate - 1/2x28 Muzzle Thread Fitted with Flash Can Bolt Carrier Group: Enhanced 9310 Steel (Bolt) 8620 Tool Steel (Carrier) Bolt is shot Peened and MPI

This Complete 10.5 inch M-LOK upper receiver comes with our RTB 12 inch free float handguard and is built with only the best Mil-Spec components. The heart of this upper is comprised of a 4150 barrel and our black nitride bolt carrier group that is finished with an incredible polish, making the action smooth and easy to keep clean. Barrel: Length - 10.5" Material - 4150 Chrome Moly Vanadium Profile - Government Finish - QPQ Corrosion Resistant Gas System Length - Carbine Gas Block Journal - .750" Twist Rate - 1:7 inches Muzzle - 1/2x28 Threaded Weight - 19oz

RTB Barreled 10.5" 5.56 Upper Receiver - Flat Dark Earth | A2 | 9" M-LOK This Barreled 10.5 inch M-LOK upper receiver comes with our RTB 9 inch free float handguard and is built with only the best Mil-Spec components.

RTB 10.5" 5.56 Upper Receiver | FLASH CAN | 12" M-LOK | Without Bolt Carrier Group and Charging Handle This 10.5 inch M-LOK upper receiver comes with our RTB 12 inch free float handguard and is built with only the best Mil-Spec components.

This Barreled 16 inch M-LOK lightweight upper receiver comes with our RTB 12 inch free float handguard and is built with only the best Mil-Spec components. The heart of this upper is comprised of a 4150 barrel. Barrel: Length - 16" Material - 4150 Chrome Moly Vanadium 11-Degree Target Crown - Further improve accuracy Profile - Pencil Finish - QPQ Corrosion Resistant Gas System Length - Mid-Length Gas Block Journal - .625" Gas Block Journal Twist Rate - 1/7 Twist Muzzle - 1/2x28 Threaded Weight - 22.7 oz Upper Receiver:

This 9mm 4.5 inch Straight Profile Barrel is machined from 4150 Chrome Moly Vanadium steel with a QPQ Corrosion Resistant Finish. This 4.5” barrel is a fully machined barrel precision-crafted from 4150 Chrome Moly Vanadium, rifled with a 1:10 twist and QPQ coated inside and out. The result is an accurate barrel that stays that way without chipping or peeling coatings and little risk of damage from corrosion, regardless of your operating environment. **These barrels do not have index pins** Length - 4.5" Material - 4150 Chrome Moly Vanadium Profile - Straight

This 9mm chambered 8.3 inch Barrel is machined from 4150 Chrome Moly Vanadium steel with a QPQ Corrosion Resistant Finish and QPQ coated M4 feed ramp extension. Quench Polish Quench (QPQ) is a specialized type of nitrocarburizing case hardening that increases corrosion resistance. It is sometimes known by the brand name of Tufftride, Tenifer Black Nitride or Melonite. QPQ is a huge improvement over Chrome Lined barrels. Unlike chrome lining, where the chrome is built up on the surface, QPQ converts the surface without the risk of dimensional build up. Length - 8.3"

A compact and portable First Aid solution to treat minor cuts or scrapes. The best bandages you’ll ever use! Specs: 10 Pack of individual use Med Packs that contain a 2x4 bandage, gauze, antiseptic towelette and triple antibiotic ointment 4-Way stretch technology for ultimate comfort and flexibility 5x stronger adhesive than the typical bandage Aloe-infused pad to promote optimal healing, latex-free SKU: MM-SPL-BNDG-PK-AB-AC-10PK UPC: 850033970616

RTB Complete Lightweight BCG - BLACK NITRIDE with 2 FREE Magpul 30 / 10 rd PMAGsRTB Complete Lightweight Bolt Carrier Group - Black NitrideFeaturing our new Right To Bear Lightweight 5.56/.223 BCG, weighing in at approximately 8.9 Ounces, or 252.5 Grams for you lightweight build fanatics! Using our low mass Bolt Carrier Group creates less reciprocating mass moving back and forth inside the action, which reduces recoil significantly. Our lightweight carrier also allows proper cycling with less gas.

10.5" Government Barrel 5.56 .223 for AR-15 (Carbine) This 5.56 chambered 10.5 inch Government Profile Barrel is machined from 4150 Chrome Moly Vanadium steel with a QPQ Corrosion Resistant Finish and QPQ coated M4 feed ramp extension. This 10.5” barrel is a fully machined carbine-length barrel precision-crafted from 4150 Chrome Moly Vanadium, rifled with a 1:7 twist and QPQ coated inside and out. The result is an accurate barrel that stays that way without chipping or peeling coatings and little risk of damage from corrosion, regardless of your operating environment.

This 5.56 chambered 7.5 inch Pistol Barrel is machined from 4150 Chrome Moly Vanadium steel with a QPQ Corrosion Resistant Finish and QPQ coated M4 feed ramp extension. Length - 7.5" Material - 4150 Chrome Moly Vanadium Profile - DRP Finish - QPQ Corrosion Resistant Gas System Length - Pistol Gas Block Journal - .750″ Gas Block Journal Twist Rate - 1/7 Twist Muzzle - 1/2x28 Threaded Weight - 17 oz SKU#: RTB55675M

Ammo Bundle | 2x AR-15 5.56x45 Magazines - BLK + 3x PMC 223A Bronze .223 Rem Ammo 55 Grain FMJ Ammo Ammo Specs:The Bronze age of ammo is here! Reliable performance shot after shot, PMC Bronze bridges the gap between range ammo costs and premium ammo precision!The commercial ammunition Poongsan Corporation produces for hunting and competition shooting, under the brand name "PMC" (precision-made cartridges), is gaining a solid reputation for excellent quality in the global market.

1pc free float design Built in anti-rotation tabs Scalloped rails Continuous top rail 1.72" inside diameter (from barrel nut cut to forward end) fits most muzzle devices and 1.5" suppressors 1.78" inside barrel nut cut area diameter Compatible with low profile gas blocks Gen 2 Feature - Quick disconnect sling socket at the 3, 6 and 9 o'clock positions Gen 2 Feature - Additional milling along flats to aid with gripping and add visual appeal Gen 2 Feature - New profile for the continuous picatinny top rail

The high-end Razor red dot is an open-top reflex sight built for top-tier performance and incredible versatility. The large, clear and crisp window provides edge-to-edge sharpness with a wide field of view and is protected by a thick and durable aluminum housing. Dot size is available in 3 MOA or 6 MOA for your choice between a more precise aiming point on a rifle or one that’s extremely quick to acquire on a handgun. Side-load battery tray makes for quick battery changes without removing the sight from your firearm. A great fit for rifles and shotguns.

Aero Precision AR15 Complete Lower Receiver w/ MOE­ SL Grip & SL-S Carbine Stock The Aero Precision AR15 Complete Lower Receiver is the perfect base for your custom AR15 build. This complete lower features AR15 Gen 2 Lower and is upgraded to include a MOE SL® Grip and MOE SL-S® Carbine Stock.

ASC’s Stainless Steel 6.8 SPC magazines are engineered with the highest levels of quality and increased longevity, simply the best in the industry! ASC 6.8 magazines are manufactured 100% start to finish in the USA using .020 gauge 410 Stainless Steel Alloy, heat treated for superior strength and lasting endurance. The interior dimensions of OAL 2.316” ± .002 are perfect for reloads. We manufacture the results you demand and need!

Builder's Grade Barreled 16" 300 BLK Upper Receiver | A2 | 12" M-LOK - Black Anodized This 16 inch M-LOK upper receiver comes with a 12 inch free float handguard and is built with only the best Mil-Spec components.

Enhance the functionality of your rifle when you install the RISE Armament AR-15 Magazine Release Button. Your fingertip will comfortably and securely fit on the button, thanks to its concave shape and horizontal, slide-resistant grooves. You’ll confidently drop your mag with each press of the RISE AR-15 Mag Release Button. Available in five anodized colors, this easy-to-install upgrade will add a heavy dose of personality to your rifle — especially when you combine the RISE Mag Release Button with one of our anodized RA-905 Handguards or QD Mounts. Specs: Sleek, ergonomic design

This 12 inch lightweight MLOK rail is compatible with any Mil-Spec AR15 upper. It features elegant cross cuts for weight savings and increased strength. Each component is manufactured right here in Florida to precise tolerances for a firm fit and reliable service. The barrel nut and all mounting hardware included. Choose from our list of Cerakote colors: Burnt Bronze, Flat Dark Earth, OD Green, Sniper Gray and Tungsten. Black Rails are anodized 12" free float handguard MIL-STD 1913 Picatinny rail on top 5 M-Lok slots on 3 sides

M-LOK Free Float Handguard - 7"This 7 inch lightweight MLOK rail is compatible with any Mil-Spec AR15 upper. It features elegant cross cuts for weight savings and increased strength. Each component is manufactured right here in Florida to precise tolerances for a firm fit and reliable service. The barrel nut and all mounting hardware included.

DISCLAIMER: This product is not manufactured, authorized, endorsed, or warranted by GLOCK. GLOCK does not warrant or represent that this product is compatible with GLOCK pistols.

This 4.5 inch Kaw Valley Precision 9MM Barrel is button rifled out of 4150 CMV Steel, QPQ Salt Bath Nitrided, with an 11-degree target crown for the best accuracy and durability possible for your SBR or 9mm AR pistol build! KVP 9MM barrels have an integrated feed ramp and will work with both Colt and Glock style AR-9 rifles or pistols. All barrels are manufactured under ISO:9001 & AS:9100 quality certifications. Barrel Material: 4150 CMV Steel Barrel Type: Button Rifled Barrel Caliber: 9MM SAAMI (9x19mm Parabellum) Barrel Twist: 1:10 Barrel Length: 4.5”

RTB Complete 16" 5.56 Lightweight Upper Receiver | A2 | 15" M-LOK | With Bolt Carrier Group and Charging Handle This Complete 16 inch M-LOK lightweight upper receiver comes with our RTB 15 inch free float handguard and is built with only the best Mil-Spec components. The heart of this upper is comprised of a 4150 barrel and our black nitride bolt carrier group that is finished with an incredible polish, making the action smooth and easy to keep clean.

RTB Complete 16" 5.56 Lightweight Upper Receiver | A2 | 12" M-LOK | With Bolt Carrier Group and Charging Handle This Complete 16 inch M-LOK lightweight upper receiver comes with our RTB 12 inch free float handguard and is built with only the best Mil-Spec components. The heart of this upper is comprised of a 4150 barrel and our black nitride bolt carrier group that is finished with an incredible polish, making the action smooth and easy to keep clean.We also carry this Upper Receiver unassembled here if you are a DIYer / Do It Yourselfer.

DISCLAIMER: This product is not manufactured, authorized, endorsed, or warranted by GLOCK. GLOCK does not warrant or represent that this product is compatible with GLOCK pistols. Faxon Firearms barrels are the pinnacle of value. Manufactured 100% in-house from cradle-to-grave, these barrels are fully stress relieved, air-gauge tested, and 11 degree target crowned to ensure superior accuracy.

Overwatch Precision TAC Drop-In Flat Trigger For Glock: 17, 19, 22, 23, 26, 32, and 34 The Overwatch Precision triggers are direct drop-in replacements for your OEM trigger. Each trigger shoe and trigger safety tab is machined in the USA out of 7075-T6 aluminum alloy, and affixed to an NP3 plated, Gen 3 OEM trigger bar by 316 Stainless Steel coiled spring pins. The trigger shoe is Type III hard coat anodized to MIL-A-8625 standard.

M-LOK Free Float Handguard - 9"This 9 inch lightweight MLOK rail is compatible with any Mil-Spec AR15 upper. It features elegant cross cuts for weight savings and increased strength. Each component is manufactured right here in Florida to precise tolerances for a firm fit and reliable service. The barrel nut and all mounting hardware included.

THESE LOWERS DO NOT FEATURE A REAR TAKEDOWN LUG POCKET 80% AR15 Lower Receiver - Flat Dark Earth Cerakote 7075 Aluminum T6 Heat Treated Magwells are flared and broached Cerro Forge (KeyHole) MPN#: 80RAW-FDE Please note: We will not ship 80% blanks to the following states: NY, NJ, D.C., CT, HI, CA, MD, WA, DE, NV, IL and RI. This is not legal advice, and we encourage you to check your local and state laws prior to ordering.

This 5.56 chambered 7.5 inch Pistol Barrel is machined from 4150 Chrome Moly Vanadium steel with a QPQ Corrosion Resistant Finish and QPQ coated M4 feed ramp extension. Quench Polish Quench (QPQ) is a specialized type of nitrocarburizing case hardening that increases corrosion resistance. It is sometimes known by the brand name of Tufftride, Tenifer Black Nitride or Melonite. QPQ is a huge improvement over Chrome Lined barrels. Unlike chrome lining, where the chrome is built up on the surface, QPQ converts the surface without the risk of dimensional build up. Length - 7.5"

DISCLAIMER: This product is not manufactured, authorized, endorsed, or warranted by GLOCK. GLOCK does not warrant or represent that this product is compatible with GLOCK pistols. KIT INCLUDES: Extractor with Loaded Chamber Indicator - Material - 174 SS MIM Extractor Depressor Plunger - Material - 4140 Steel Extractor Depressor Plunger Spring Spring Loaded Bearing Firing Pin (Striker) - Material - 174 SS MIM Firing Pin Spring Firing Pin Safety (Material - 4140 Steel (Electroless Ni Coating)) with Spring Firing Pin Channel Liner Channel Liner Tool Firing Pin Spring Cups

This is a complete bolt completion kit finished in Black Nitride. This Kit comes with everything you need to complete your Bolt Carrier Group other than the Carrier itself. These are perfect kits to keep as a spare or backup for your BCG.

Right To Bear Dedicated 22 LR Stainless Steel Bolt GroupGreat for any .22LR enthusiast. This Right To Bear Bolt Group was developed to provide a long lasting and reliable bolt group that is compatible with all CMMG and RTB .22 AR barrelsDesigned to work with all CMMG and RTB .22LR barrelsStainless Steel ConstructionPlease note: These .22 BCG's are test fired and may have light carbon fouling MPN#: RTB-22BA487

Featuring our new Right To Bear Lightweight carrier, weighing in at approximately 6.8 Ounces, or 194.1 Grams for you lightweight build fanatics! Using our low mass Carrier creates less reciprocating mass moving back and forth inside the action, which reduces recoil significantly. Our lightweight carrier also allows proper cycling with less gas. When used in conjunction with an adjustable gas block & reduced power buffer spring, you can tune the gas way down, which will reduce muzzle rise and carbon build up.

DISCLAIMER: This product is not manufactured, authorized, endorsed, or warranted by GLOCK. GLOCK does not warrant or represent that this product is compatible with GLOCK pistols.

DISCLAIMER: This product is not manufactured, authorized, endorsed, or warranted by GLOCK. GLOCK does not warrant or represent that this product is compatible with GLOCK pistols. This Complete 4.5 inch M-LOK upper receiver comes with a 4.25 inch free float handguard and is built with only the best Mil-Spec components. The heart of this upper is comprised of a 4150 barrel and our black nitride bolt carrier group that is finished with an incredible polish, making the action smooth and easy to keep clean. Barrel: Length - 4.5" Material - 4150 Chrome Moly Vanadium

AR15 Anodized 80% Lower Receiver - Fire / Safe Engraved - Serial Number / Model / Mfg Engraving ^ These lowers come engraved with FIRE / SAFE on both sides of the receiver. It's made from T6 heat-treated 7075 aluminum with a Type III hardcoat anodized finish to protect against wear and tear and corrosion. Its magwells have been flared and broached, and all it needs is a machined trigger and safety well in order to be a fully functional, mil-spec lower receiver.

Sniper Grey Cerakote 80% Lower Receiver - Optional Safety Engraving THESE LOWERS DO NOT FEATURE A REAR TAKEDOWN LUG POCKET 80% AR15 Lower Receiver - Burnt Bronze Cerakote 7075 Aluminum T6 Heat Treated Magwells are flared and broached Cerro Forge (KeyHole) Please note: We will not ship 80% blanks to the following states: NY, NJ, D.C., CT, HI, CA, MD, WA, DE, NV, IL and RI. This is not legal advice, and we encourage you to check your local and state laws prior to ordering.Please note: Some states may not allow you to legally manufacture a firearm.

Breek Arms' mission is to provide quality parts at competitive prices. Our newly developed RG2-S (Rigid Rail Mod2 Skeletonized) Handguard line up is an evolution from our previous lineup. Our Patent Pending locking mechanism uses a wedge block system that puts equal pressure all the way around the barrel nut. This gives you better harmonics and a much stronger mounting solution especially when you're putting pressure on the end using a bipod or sling.

Balancing durability with lightweight ease is the hallmark of the Lancer L5AWM 30-rd magazine. The molded polymer body comes with wraparound feed lips, which are designed with PTFE-coated hardened steel for heat-, impact- and corrosion-resistance. In fact, this Lancer AR magazine can be dropped from a 5-foot height and still keep on going. Other features give this product an advantage over others: Withstands temperatures from -40 to 180 degrees Fahrenheit Non-tilt follower Stainless steel spring and slide-on base

Always Armed .308 / AR-10 M-LOK Free Float Low Profile Handguard - 12"This 12 inch low profile rail is compatible with any Mil-Spec AR10 upper. Each component is manufactured right here in Florida to precise tolerances for a firm fit and reliable service. The barrel nut and all mounting hardware are included. 12" Free Float Hand GuardMIL-STD 1913 Picatinny RailM-Lok Slots on 3 Sides6000 Series Aluminum ExtrusionClamp on System for Easy AssemblyBarrel Nut & Mounting Screws IncludedHard Coat Black Anodized FinishMade in the USALightweight DesignSKU:AA12MLOKBLK-TRUPC:860006521640

RTB COMPLETE 16" 5.56 UPPER RECEIVER - FLAT DARK EARTH | A2 | 15" M-LOK | BCG & CH This Complete 16 inch M-LOK upper receiver comes with our RTB 15 inch free float handguard and is built with only the best Mil-Spec components. The heart of this upper is comprised of a 4150 barrel and our black nitride bolt carrier group that is finished with an incredible polish, making the action smooth and easy to keep clean. Barrel: 16" 5.56 4150 CMV Barrel - Black Nitride M4 Carbine Profile - .750" GB Journal 1:7 Twist Rate - 1/2x28 Muzzle Thread Bolt Carrier Group:

RTB Barreled 16" 5.56 Upper Receiver | A2 | 15" M-LOK - Black Anodized This Barreled 16 inch M-LOK upper receiver comes with our RTB 15 inch free float handguard and is built with only the best Mil-Spec components.

Mil-Spec BCG - MPI M16 BCG (5.56) This M16 bolt carrier group drops right into your M16, AR15 or M4 platform rifle and features: Enhanced 9310 steel (bolt) 8620 tool steel (carrier) Chrome lined carrier (auto) Chrome lined gas key S7 tool steel extractor Mil-spec extractor spring, black extractor insert, Viton O-ring Shrouded firing pin Mil-Spec gas key (4130 Steel) attached with Grade 8 hardware and properly staked Bolt is shot peened and MPI SKU:PH158 UPC:860006521489 Maximum Purchase:30 units

Diamondback Barrels Are the Ideal Replacement for Your AR-15 Platform Firearm Diamondback AR-15 parts and accessories are quality made parts identical to what Diamondback would include on their own builds. This high quality AR-15 barrel is perfect for the home gun-smith or AR-15 kit builder. This barrel features a 5/8x24 thread pitch based on a Rifle-length gas system with a Nitride finish. This barrel from Diamondback represents a great value and superb quality. Features: Manufactured by Diamondback Barrels Co. Length: 20″ inches 1:8 Twist DPMS Gen 1 Format Weight: 3.6 lbs

The Aero Precision AR15 Complete Lower Receiver is the perfect base for your custom AR15 build. This complete lower features AR15 Gen 2 Lower and is upgraded to include a MOE SL® Grip and MOE SL-S® Carbine Stock. Save when you buy it complete and let our specialists do the installation for you! AR15 Gen 2 Lower Receiver MOE SL® Grip MOE® SL-S™ Carbine Stock Lower Parts Kit Carbine Receiver Extension AR15 Carbine Buffer and Spring These parts are installed

NEW to Breek Arms, the 308 AR WARHAMMER MOD2 ambidextrous charging handle! The WARHAMMER is an incredibly affordable upgrade compared to other 308 charging handles in the market without sacrificing the quality that Breek Arms is proud of. The Warhammer will substantially increase the use of your .308 / 7.62 AR as an easy drop in upgrade. Easily grab on either side of the handle and you can quickly charge your rifle even with large gloves with the textured grooves that are cut into the latch handles. The wide set-back latches work great for large optics.

7.5" DRP Profile Barrel 5.56 (Pistol) + Right to Bear M-LOK Free Float Handguard - 7" Barrel Specs: This 5.56 chambered 7.5 inch Pistol Barrel is machined from 4150 Chrome Moly Vanadium steel with a QPQ Corrosion Resistant Finish and QPQ coated M4 feed ramp extension.Quench Polish Quench (QPQ) is a specialized type of nitrocarburizing case hardening that increases corrosion resistance. It is sometimes known by the brand name of Tufftride, Tenifer Black Nitride or Melonite. QPQ is a huge improvement over Chrome Lined barrels.

RTB Complete 16" 5.56 Carbine Upper Receiver | 15" M-LOK | BCG & CH: This Complete 16 inch M-LOK upper receiver comes with our RTB 15 inch free float handguard and is built with only the best Mil-Spec components. The heart of this upper is comprised of a 4150 barrel and our black nitride bolt carrier group that is finished with an incredible polish, making the action smooth and easy to keep clean. Barrel: LENGTH - 16" MATERIAL - 4150 CHROME MOLY VANADIUM 11-DEGREE TARGET CROWN - FURTHER IMPROVE ACCURACY PROFILE - M4 FINISH - QPQ CORROSION RESISTANT GAS SYSTEM LENGTH - CARBINE

Nickel Boron AR10 / .308 Bolt Carrier Group - BCG This MPI 9310 NiB plated 308 BCG is a perfect choice for your AR10 or any other large frame DPMS pattern AR build. Made from enhanced 9310 steel bolt and 8620 tool steel carrier, this shot-peened BCG is one of the most reliable, well-made carrier groups available. It comes with a lifetime warranty, too, making it ideal for any enthusiast.

This 458 SOCOM Bolt Completion Kit can be used for SOCOM chambered AR barrels and comes with everything other than the carrier. The MPI bolt is made from enhanced 9310 steel and is properly heat treated to exacting specifications. The bolt is shop-peened and magnetic particle inspected. This 9310 458 SOCOM AR bolt comes finished in black nitride and includes a Viton O-Ring. Bolt Machined from 9310 tool steel Heat treated to military specifications Shot Peened MPI Black Nitride Finish Extractor Heat treated to military specifications Shot peened

This full mass carrier is exactly what you need to finish your AR15, M16 or M4 Bolt Carrier Group. Pairs perfectly with any of our bolt completion kits. Bolt, cam pin, firing pin and firing pin retaining pin not included. 8620 Tool Steel (Carrier) Chrome Lined Carrier (AUTO) Chrome lined gas key Mil-Spec Gas Key (4130 Steel) attached with Grade 8 hardware and Properly staked SKU#: PHCLC