Gun Parts
(4,340 deals total)
19 months ago
The CMC Single Stage trigger features a non-adjustable flat trigger bow with a 3.5lb pull that breaks like glass. It has almost no take-up and extremely short reset to make follow up shots fast and easy. The flat trigger increases the surface area that your finger rests on giving you increased control and leverage when pulling the trigger. The hammer is lightened and uses a high-power Rocket Wire spring that ensures reliability with commercial and surplus ammunition.
- UPC: 850544004022
- MPN: 91503
19 months ago
The Gunner profile is a blend of two of the best performing profiles of all time, Gov’t and Pencil.
Proving that every once and awhile, the Government can do something right, the Gunner’s profile from the extension to the gas block mimics that well-known taper. From there, innovation takes over and the Gunner moves to a .625″ gas block journal and our famed pencil profile out front.
Removing the weight from the front of the barrel ensures maximum versatility and keeps material to the rear to maximize heat resistance and mitigate whip.
- UPC: 816341023093
- MPN: 15BW8M14NGQ-5R-NP3
19 months ago
If you’re looking for a more robust mounting method for your gas block… look no further. Pinning your gas block, in addition to the use of set screws, gives the user the extra piece of mind that your gas block won’t shift or loosen while firing.
We took some of our most popular barrel models and took the biggest headache out of pinning your gas block by pre-notching the gas block journal and drilling corresponding holes in the included low profile gas block.
- UPC: 816341025424
- MPN: 15A58C10NSQ-APGB
19 months ago
The ALG Defense Advanced Combat Trigger (ACT) is designed for those shooters where tradition, value and regulatory concerns are of primary importance. The pull of the ACT is very similar to a standard mil-spec trigger, however it is sharper and the grittiness of the stock trigger pull has been removed while the traditional reliability of a stock trigger remains. The pull weight is not lower than the M4/M16 minimum weight specification of 5.5lbs.
- UPC: 854014005212
- MPN: 05-199
19 months ago
,
by Dealer
.jpg)
Gauntlet Arms AR15 SOPMOD Stock with Storage Compartments
SPECIFICATIONS:
Brand: Gauntlet Arms
Model: Tactical Sopmod Black Mil-Spec Buttstock
Style: Rifle Stock
Material: Glass Filled Polymer
Sling Mount: Yes
Sling Style: QD Mount, Sling Loop
Buffer Tube Compatibility: Mil-Spec
Adjustability: Yes
Color: Black
Storage Compartment: Yes
Weight: 0.6 lbs
Includes Buffer Tube: No
Caliber Specific: No
Adjustable Cheek Riser: No
Rubberized Buttpad: Yes
MMC Armory
10902
19 months ago
$34.99
Gun Nuts Match Fire Control Group Lower Parts Kit - The Schmid Tool Gun Nuts line of AR-15 Parts was crafted by Schmid Tools, a company that has been producing fire control groups and lower parts kits for military contracts since 1980. Schmid Tool knows exactly what goes into making every part perfect.
Trigger
Hammer
Disconnect
Hammer Spring
Trigger Spring
Disconnect Spring
Hammer Pin
Trigger Pin
Color: Nickel
Trigger Type: Single Stage
Pin Size: Small (.154in)
MPN#: SI-FCG-3
UPC#: 850022225031
ID 1873336
- UPC: 850022225031
- MPN: SI-FCG-3
19 months ago
BUN-228
PSA 23 Round 5.7 Rock Steel Magazine
DETAILS
Brand: Palmetto State Armory
Caliber: 5.7x28mm
Capacity: 23
**While this magazine will fit in a Ruger 5.7 magwell, we cannot guarantee that they will function in a Ruger 5.7 Pistol
*Due to geometry differences, the 5.7 Rock 23 round *magazine will fit in a Ruger 5.7 Pistol as well as our 5.7 Rock pistol, however function cannot be guaranteed.
A 20 round Ruger 5.7 magazine will NOT work in a 5.7 Rock.
FEATURES
This black oxide alloy steel 23-round 5.7x28mm magazine is compatible with the PSA 5.7 Rock Pistol.
19 months ago
$8.99
Hexmag Carbon Fiber Magazine – .223/5.56 – 30RD
High quality components and precise manufacturing make Hexmag ideal for both new shooters and experienced gun owners. The durability, reliability and excellent build quality will provide years of service you can count on.
Precise Manufacturing
Long Term Reliability
Durable Construction
- UPC: 688614507537
- MPN: HX30-AR15S2-CFC
19 months ago
This Savage magazine was originally manufactured for Mark II and 900 firearms. This magazine is small and compact, holding under 10 rounds of 22lr ammunition.
- UPC: 062654900051
- MPN: 22593
19 months ago
Introducing the Dirty Bird Industries 9mm Bolt Carrier. Made out of 8620 Steel, and designed to work with Colt and Glock style magazines, this BCG is designed to make sure that you will not have any malfunctions when you are out in the field or on the range. We then had these coated in a smooth black nitride coating to reduce the chance of corrosion and have a slick-looking BCG. We also wanted to make sure that we could have a removable counterweight with our 9mm BCG to accommodate for ever popular Silent Recoil Systems in the industry.
- UPC: 810084370056
- MPN: D078
19 months ago
The MOE SL Stock – Mil-Spec Model (MOE Slim Line) is a drop-in replacement buttstock for AR15/M4 carbines using mil-spec sized receiver extension tubes.
Designed for the modern battlefield, the sleek profile, dual-side release latches, rolled toe, and angled rubber butt-pad are optimized for use with body armor or modular gear and provides for efficient shoulder transitions.
Made in U.S.A.
Features:
Mounts on mil-spec sized carbine receiver extension tube (not included) from manufacturers such as Colt, LMT, Ruger, S&W, SIG, and others (please see the note below)
19 months ago
SKU 51655130178
Brand Sig Sauer
Model Number SORG0605
UPC 798681655328
PRODUCT DETAILS
Brand: SIG Sauer
Product Type: Grip module kit
Sight: RomeoZero Micro Reflex Sight
Fit: SIG Sauer P365XL
Color: OD Green
Objective: 22mm
Dot Size: 6 MOA
Reticle: Illuminated Red Dot
Power: 1x
FEATURES
- UPC: 798681655328
- MPN: SORG0605
- Model: Sig Sauer ROMEO Zero
19 months ago
$24.95
The Wilson Combat Ambidextrous AR Safety features an ambidextrous design so the operator can actuate the safety from either side of the rifle. The double-head USGI style safety selector is a rigid, precisely sintered part with a tough black nitride finish that is wear and corrosion-resistant.
This ambidextrous safety selector is an easy upgrade to any semi-automatic AR platform and is compatible with any AR/AR-10/AR pistol caliber carbine that will accept a USGI style safety.
Specifications:
Ambidextrous Design
Drop-In Replacement for Standard Mil-Spec Selectors
- UPC: 810025500566
- MPN: TR-SSA-B
19 months ago
The Dirty Bird RECCE V2 Upper Assembly is the latest evolution of our popular 16″ SMRS Upper Assembly. This upper is built to withstand extreme hard use while maintaining exceptional performance and accuracy.
- UPC: 810084371077
- MPN: D082-11
19 months ago
,
by Dealer
Grand Opening of our storefront on Saturday November 9th from 10am to 5pm! Free Food and Drink for all. Enter to win a Patriot AR-15 Rifle or Pistol that day - No purchase necessary. Details in pic. Come see us! #grandopening #gunstore #gunshop
Pro2A Tactical
212
19 months ago
This is a 19-round factory magazine for the Springfield XDM 9mm pistol. This factory magazine includes a X-Tension sleeve for Backstrap 3.
Specifications
Manufacturer: Springfield
Model: XDM
Caliber: 9mm Luger
Capacity: 19 Rounds
Features: X-Tension Sleeve for Backstrap 3
MPN#: XDM50193
- UPC: 706397888763
- MPN: XDM50193
19 months ago
Kit Contains 1-812296030513 - Breek Black Mod2 Warhammer Large Lever Charging Handle
1-851046006033 - Rise Armament AR-15 Bolt Carrier Groupf for .223 Rem/5.56mm NATO, Black Nitride Steel
The RISE Armament AR-15 Bolt Carrier Group (BCG) manufactured with precision and individually inspected to ensure high-level performance. The easy-to-clean black nitride finish offers unmatched strength with each pull of the trigger.
Key Features
High-strength and easy-to-clean black nitride finish
Individually MPI tested
Bolt: 9310 MPI tested
- UPC: 851046006041
- MPN: RA-1011-BLK-KIT
19 months ago
,
by Dealer
Century International Arms Catamount Fury Magazine 12 Gauge 5 Round Capacity Polymer Construction Matte Black Finish-sold as a pack of 5 MAGAZINES
Sold as a pack of 5 magazines
- UPC: 787450236059
- MPN: MA185
19 months ago
,
by Dealer
Use code: SUNDAY15 at checkout for 15% off sitewide! Exclusions Apply.
Offer Expires at Midnight!
19 months ago
The C Products AR-15 magazine is a high-performance, lightweight, and durable magazine made from 6061-T6 aluminum. It is compatible with AR-15 pattern rifles and similar pattern clones chambered in 5.56 NATO, .223 Remington, or .300 AAC Blackout. The magazine holds 20 rounds and features a type III hard coat anodized finish for long-term durability.
Features:
AR-15 magazine
For 5.56 NATO, 2.23 Remington, and .300 AAC Blackout rounds
20 round capacity
6061-T6 aluminum body
Type III hardcoat anodized finish
Advanced geometry follower for reliable feeding
- UPC: 766897411571
- MPN: 2023001178CPD
19 months ago
This AR15 Complete Upper features a 16″ 5.56 Carbine Barrel w/ Pinned FSB and Magpul™ MOE® Carbine Handguard
Upper Features:
Upper: Standard AR15 Upper Receiver
Barrel: 16″ 5.56 Carbine Barrel w/ Pinned FSB
Handguard: Magpul™ MOE® Carbine Handguard
Gas System: Carbine Length Gas System
Muzzle Device: Standard A2 Flash Hider
This complete upper DOES NOT include a BCG and Charging Handle.
- UPC: 840014604586
- MPN: APAR502504M64
- Model: The Aero Precision AR15 Complete Upper
19 months ago
Although you may think a safety switch is a minor feature, the Geissele Super Configurable Safety gives you a genuinely ambidextrous functionality and the ability to configure the safety selector switch on your carbine to fit a variety of shooting styles and operations.
Features
- Color: Black
- Material: Stainless Steel
- Finish: Black Nitride
- Orientation: Ambidextrous
- UPC: 810081130370
- MPN: 05-1870B
19 months ago
Aero Precision’s Enhanced Handguard provides a lightweight free float design for your custom AR-15 build. This M-LOK compatible system pushes advanced modularity beyond that of the 1913 picatinny rail system. Machined to MIL-SPEC dimensions and engineered to perfection, this handguard eliminates bulk yet retains strength and stability.
This handguard has been designed for the AR-15/M4E1 platform. It is not compatible with the M5 .308/M5E1 platform.
Features:
1pc free float design
Built in anti-rotation tabs
Scalloped rails
Continuous top rail
Compatible with low profile gas blocks
- UPC: 815421028874
- MPN: APRA100294A
19 months ago
Our Enhanced M-LOK (EM) Handguards provide a lightweight free float design for your custom M5 .308 build. The M-LOK system allows advanced modularity past the current 1913 picatinny rail system. Machined to mil-spec dimensions and engineered to perfection, this handguard eliminates bulk while retaining strength and stability.
Features:
1pc free float design
Built in anti-rotation tabs
Scalloped rails
1.72″ inside diameter (from barrel nut cut to forward end) fits most muzzle devices and 1.5″ suppressors
1.78″ inside barrel nut cut area diameter
- UPC: 840014615872
- MPN: APRA308233A
19 months ago
,
by Dealer
Want to see ALL of our Gun.Deals Exclusive Prices?
CLICK HERE TO CHECK OUT ALL THESE DEALS
SPECIFICATIONS:
Caliber: 9mm
Classification: Glock 19 9mm Gen 1-3 Complete Slide
Barrel: Tactical Kinetics 9mm Glock 19 Compatible Nitride Non Threaded Barrel
Barrel Material: 4140 CMV
Slide: Live Free Armory RMR Cut Glock G19 Slide, Stripped, Graphite Black Cerakote Finish, 416 Stainless, Compatible for Glock G19 Gen 1-3, Combat
Slide Material: 416 Stainless
Slide Finish: Black Nitride
Delta Team Tactical
2143
19 months ago
Matador Arms MAT-9 Blowback Upper Receiver
Bufferless – Monolithic – Non-Reciprocating
The MAT-9 upper receiver is side-folding compatible and features Matador Arms patent-pending EZTS “Easy Take-down System” with no tools required to break down the upper for maintenance and cleaning. The 9mm upper is machined for maximum weight reduction, slim profile, and compatibility with bolt catches and lower receivers. The upper is also built with a tapered multi-material 4-piece trunnion system to maintain mechanical accuracy and durability.
- MPN: MAT9-U-BLK
19 months ago
The Super SCAR trigger group is easy to install and uses Mil-Spec .154” diameter trigger pins for compatibility. Just drop it in and you’re ready to go. It features a curved trigger bow that helps to give you more control of the trigger but ultimately comes down to user preference. Each trigger is precision EDM wire cut from heavy duty tool steel with a durable black finish giving you the reliability and durability you can depend on. The best way to remain accurate between rifles is to keep them consistent.
- UPC: 854014005120
- MPN: 05-157
19 months ago
The Sons of Liberty Gun Works 6.5 Creedmoor Match Grade Barrel is perfect solution for your next AR-15 precision rifle. Made from 416R stainless steel—known for being the best steel for accuracy—with an SPR profile, this AR-15 barrel is designed for long range accuracy. It features a 1:8 twist rate and is threaded 5/8×24 for muzzle brakes, suppressors, and flash hiders. It is high pressure tested to ensure it will last a long time and magnetic particle inspected to ensure no micro cracks have developed.
- MPN: 24MATCH+6.5CM
19 months ago
The Sons of Liberty Gun Works 6.5 Grendel Match Grade Barrel is perfect solution for your next AR-15 precision rifle. Made from 416R stainless steel—known for being the best steel for accuracy—with an SPR profile, this AR-15 barrel is designed for long range accuracy. It features a 1:8 twist rate and is threaded 5/8×24 for muzzle brakes, suppressors, and flash hiders. It is high pressure tested to ensure it will last a long time and magnetic particle inspected to ensure no micro cracks have developed.
- MPN: 24MATCH+6.5G
19 months ago
Features:
- 6061-T6 aluminum alloy
- Steel barrel nut included
- MIL-A-8625F, Type III, Class 2 hardcoat anodized
- Inside diameter: 1.3”
- Width: 1.5"
- Weight: 7.6 oz
Accessory Attachment: M-LOK
Color: Black
Finish: Hardcoat Anodized
Gas System Length: Carbine
Handguard Length: 8.00 in
Inner Diameter: 1.30 in
Material: Aluminum - 6061-T6
Platform: AR-15
Weight: 7.5 Oz
MPN#: BCM-MCMR-8-556-BLK
- UPC: 812526021663
- MPN: BCM-MCMR-8-556-BLK
19 months ago
This Glock 17/22 Lower Parts Kit is everything that you need to finish your Glock or a Polymer 80 Lower. These Glock parts are machined to exact specifications to make sure that you have a well-functioning Glock. Our Glock lower Parts Kit comes with Polymer Trigger and safety bar with 5.5 lb trigger pull.
Kit Includes:
Polymer Trigger w/ Bar
Trigger Housing
Trigger Spring
5.5lb Trigger Connector
Trigger Pin
Trigger Housing Pin
Locking Block Pin
Slide Lock & Spring
Magazine Catch & Spring
Factory Slide Stop Lever
2 Trigger Adjustment Allen Screws And Wrench
- MPN: 7150
19 months ago
UTG PRO AR-15 Super Slim M-LOK 15" Drop-in Car. Length Rail - MTU015SSM
Features:
Proudly Designed and Made in USA
Compatible with Standard Delta Ring Assembly, Barrel Nut, and Round Front Handguard Cap
Lightweight with 30 Slot Scalloped Top Picatinny Rail, Extends to and Meets Up with Upper Receiver Flat Top, Providing Ample Real Estate for Optics and Other Accessories
Features 45 M-LOK Slots on 7 Slot Tracks for Mounting M-LOK Rails and Direct Accessories, Easily Tailoring the Rifle to the User’s Specific Requirement
- UPC: 4717385552951
- MPN: MTU015SSM
19 months ago
This is a new AirTronic USA, mil-spec, rifle-length, M203 handguard/heatshield. The internal is formed to conform to the contour of the barrel of an M16 rifle and the external is formed to a special shape. This item is new without a box. These handguards feature a strong lightweight nylon construction and an inner Aluminum heatshield but they do not come with any mounting hardware. These handguards are marked “ASSY-19200-8448377 MFR 1C5Q6”
Boss Firearms
371
19 months ago
Our Accu-Tac AR flash hider sports a three-pronged external profile and our exclusive external accurizing flutes that improve muzzle harmonics over other blast dispersing brakes. These extensively tested features effectively dissipate flash and minimize muzzle signature but unlike many competitive AR muzzle devices, the Accu-Tac has no negative impact on accuracy. Hardened 4140 steel, fits standard, GI threaded AR barrels.
Specifications:
Material: Hardened 4140
Thread: 5/8″ – 24 TPI
Length: 1.990″
Diameter: .865″
Weight: 2.3 oz.
Finish: Black Matte Melonite
- UPC: 811826021717
- MPN: TR-ATFH-68
19 months ago
The TMAG 30 AR/M4 GEN M3 is a highly reliable, translucent, 30-round magazine for STANAG-compatible weapons chambered in 5.56x45 NATO/.223 Remington. Molded from a durable translucent material with an olive drab hue, it provides shooters the ability to visibly verify various ammunition types and the current round count. Featuring ribbed front and rear straps for improved purchase during magazine changes.
Specifications for Magpul Industries TMAG MK16/16S HK416/MR556/M27 IAR .223 Rem/5.56 NATO 30 Round Rifle Magazine:
Manufacturer: Magpul Industries
Fabric/Material: Polymer
- UPC: 840815147626
- MPN: MAG1417ODT
19 months ago
,
by Dealer
Want to see ALL of our Gun.Deals Exclusive Prices?
CLICK HERE TO CHECK OUT ALL THESE DEALS
NO FURTHER DISCOUNTS CAN BE APPLIED TOWARDS THIS ITEM
SPECIFICATIONS:
Caliber: 5.56 NATO
Classification: Pistol
Barrel: Bear Creek Arsenal 7.5" AR-15 Pistol Barrel 5.56 NATO Stainless Steel 1-7 Twist
Twist Rate: 1:7T
Thread Pitch: 1/2x28
Upper Receiver: Davidson Defense Mil-Spec AR-15 Upper w/ M4 Feedramps - 7075 T6 Aluminum
Handguard: Davidson Defense AR-15 7" Quad Rail Handguard
19 months ago
$249.99
SKU DG01-51655174999
Brand Palmetto State Armory
Model Number DG01-51655174999
DETAILS
Slide Material: Stainless Steel
Optics Footprint: RMR Pattern
Slide Finish: Cerakote, Gray
Front Sight: Co-Witness Day Sight, Black (Not A Night Sight)
Rear Sight: Co-Witness Day Sight, Black (Not A Night Sight)
Barrel Material: Stainless Steel, Honeycomb
Barrel Finish: Copper
Barrel: 4.5" 9mm 1:10 Twist Threaded Barrel
Barrel Thread: 1/2x28 TPI
Thread Protector Included
*Compatible with all PSA Dagger Compact & Full Size-S Frames and Gen3 compatible frames.
FEATURES
- MPN: DG01-51655174999
19 months ago
This complete upper includes our ATLAS S-ONE Handguard! The S-ONE line of handguards are designed with size and weight in mind, providing the perfect addition to your lightweight build. Aero Precision’s proprietary ATLAS attachment system is a durable and dependable mounting platform, maintaining a slim profile while still providing the strength and stability customers have grown to love from Aero Precision handguards. This complete upper does not include BCG or Charging Handle.
Includes:
M5 (.308) Threaded Assembled Upper Receiver
15″ M-LOK ATLAS S-ONE Handguard
- UPC: 815421028591
- MPN: APAR538115M69
- Model: Aero Precision M5 Complete Upper 308
19 months ago
The ATLAS R-ONE is the newest addition to the Aero Precision Handguard lineup. Machined from 6061-T6 Aluminum, the R-ONE line of handguards are designed with size and weight in mind, providing the perfect handguard for your lightweight build. Our proprietary ATLAS attachment system is a durable and dependable mounting platform, maintaining a slim profile while still providing the strength and stability customers have grown to love from Aero Precision handguards.
ATLAS
- UPC: 840014617975
- MPN: APRA501399A
19 months ago
,
by Dealer
Bundle of the core gas components for your next AR-15 carbine build. Grab this barrel, BCG and gas tube assembly kit at a discount to assemble your next workhorse carbine.
Bundle Includes:
16" M4 profile parkerized (matte) barrel chambered in .223 Wylde (will also shoot 5.56) with 1:8 twist
Assembed low profile .750 gas block and stainless steel cabine length tube
M-16 Full Auto Black Nitride Bolt Carrier Group
3CR Tactical
87
19 months ago
Toolcraft .223/5.56/300 BLK C158 M16 Profile Bolt Carrier Group - Black Nitride - TC556BCGBN158
19 months ago
This amazing 16″ complete upper from Foxtrot Mike has all of the expensive features and high-quality workmanship that FM Products is quickly becoming famous for, but at a price tag that is very affordable. This upper is ready to drop in and push pin on your favorite lower and is built to function at the highest level of accuracy, and comfort. Trust me when we say this is not your standard AR upper. Just look at all of these features. This monolithic style Gen II Upper from F.M.
- MPN: FM15U-223-G2-16I-2
19 months ago
This Left-Handed BCG by Toolcraft is a high quality BCG, for our Left-Handed friends, so you don’t have to worry about any more annoying brass being ejected across your body. The bolt is CNC machined from heavy duty 9310 alloy steel and 8620 steel is used for the bolt carrier. 9310 steel has a high core & fatigue strength rating, a high hardenability rating, and it’s about 7% stronger than the Carpenter 158 steel used in most BCGs. The Toolcraft 5.56/.223/.300BLK Bolt Carrier Group comes with the Salt Black Nitride finish for exceptional corrosion and wear resistance.
- MPN: TOOAUTO-016LH
19 months ago
Complete Lower Parts Kit includes, Bolt Catch, Bolt Catch Plunger, Bolt Catch Roll Pin, Bolt Catch spring Buffer, Retainer, Buffer Retainer spring Disconnect, Disconnect spring Hammer (Silver Stainless), Hammer Pin, Hammer spring Magazine Catch, Magazine Catch Button, Magazine Catch spring Pistol Grip (A2 style), Pistol Grip Lock Washer, Pistol Grip Screw, Pivot Pin, Pivot Pin Detent, Pivot Pin Detent spring Selector, Selector Detent, Selector Detent spring Takedown Pin, Takedown Pin Detent, Takedown Pin, Detent spring Trigger (Silver Stainless), Trigger Guard, Trigger Guard Roll Pin, Trigger
- UPC: 661799410205
- MPN: G2-K421-A000-0P
19 months ago
LANTAC USA manufactures the highest quality accessories for AR-15/M16 pattern rifles. Precision made in the U.S.A., rifles, muzzle brakes and more.
- UPC: 820103732611
- MPN: DGN556B
19 months ago
Enjoy a Blast from the Past with these Phosphate Coated and Chrome-Lined Barrels.
Great for cloners and purists, these barrels share the same features as our Bloodline 16” USASOC barrel with 5.56 NATO chamber and mid-length gas but with the classic, time-tested, and proven mil-spec phosphate coating and chrome-lined bore.
- MPN: CL-16.25-556-7-M
19 months ago
$41.95
The most commonly used parts to complete a custom AR15 rifle and the same parts we use in our shop on our custom AR15 rifles. These quality parts are built by USGI contractors to meet or exceed Military Specifications. This kit includes a right hand safety selector.
NOTE – There are no fire control parts (Hammer, Trigger, Disconnector, Springs) included in this kit.
Parts Included:
Bolt Catch
Bolt Catch Plunger
Bolt Catch Roll Pin
Bolt Catch Spring
Magazine Catch
Magazine Catch Spring
Magazine Catch Button
Pivot Pin
Takedown pin
2x Pivot/Takedown detents
- UPC: 874218006334
- MPN: TR-LOWERK
19 months ago
RISE Armament advanced bolt-carrier group (BCG) manufactured with precision and individually inspected to ensure high-level performance. Coated with nickel boron to reduce friction and improve overall performance.
Key Features:
Coated with nickel boron to reduce friction and improve the rifle’s overall performance
Unit weight: 11.6 oz.
Individually MPI tested
Bolt: 9310 MPI tested
Carrier: 8620 tool steel heat treated and case hardened
Gas key: tool steel – grade 8 hardened fasteners and staked properly
Cam pin: 4140 steel
Extractor: tool steel – shot peened
- UPC: 851046006040
- MPN: RA-1011-SLVR
19 months ago
,
by Dealer
AR-15/47/9/300 Custom
Lightweight Side Cut Billet Upper Receiver - Black
- MPN: AR-15 ''RED GRA-15''
19 months ago
This 22” 22 ARC barrel is machined from 416 Stainless Steel with a bead blasted finish. Our Premium Series Barrels feature a Nickel Boron Coated Extended M4 Feed Ramp Extension.
Featuring functionally aggressive flutes and crisp, clean lines, BA Fluted barrels deliver the perfect balance of weight and rigidity. Utilizing six and eight flute designs we’ve achieved weight reduction up to and exceeding 16 ounces. Confidently lighten your kit without sacrificing an ounce of accuracy.
Specifications:
Length: 22″
Material: Hardened 416R Stainless Steel
Profile: Bull
- UPC: 819747020956
- MPN: BABL22ARC04PL
19 months ago
The Rosco Manufacturing Purebred 6mm ARC is a 16-inch, 6mm ARC caliber barrel designed for AR-15 platforms. This barrel prioritizes performance with an SPR contour that’s ideal for cold bore shots on target and a balanced weight. Gas ports are optimized for popular precision bullet weights and suppressor use, ensuring reliable function. The barrel features a Rifle Length gas system for smooth operation.
Features:
Chambered in 6mm ARC
416R stainless steel construction
80 grit bead blasted finish
5/8×24 barrel threads
SPR barrel profile
Rifle length gas system
.750 gas block size
- MPN: PB-20 SPR 6MM 7.5 R1
19 months ago
,
by Dealer
.jpg)
Want to see ALL of our Gun.Deals Exclusive Prices?
CLICK HERE TO CHECK OUT ALL THESE DEALS
SPECIFICATIONS:
ASSEMBLED
Classification: Rifle
Buffer Tube Kit: Omega Mfg. Buffer Tube Kit
Stock: Gauntlet Arms Tactical Sopmod Black Mil-Spec Buttstock
Receiver: Aero Precision LR-308 M5
LPK: Recoil Technologies LR-308 Mil-Spec Quality Lower Parts Kit (LPK)
Looking for a Coupon Code?! Use the Current Month and Year (ie: august2023) at checkout to save on your next order
Delta Team Tactical
1669
19 months ago
SKU DG01-51655122751
Brand Palmetto State Armory
Model Number DG01-51655122751
DETAILS
Slide Material: Stainless Steel
Optics Footprint: RMR Pattern
Slide Finish: Cerakote Gray
Front Sight: Co-Witness Sight, Serrated
Rear Sight: Co-Witness Sight
Barrel Material: Stainless Steel
Barrel Thread: 1/2x28 TPI
Thread Protector Included
*Compatible with all PSA Dagger compact Frames and Gen3 compatible frames.
FEATURES
- MPN: DG01-51655122751
19 months ago
SKU DG01-51655130032
Brand Palmetto State Armory
Model Number DG01-51655130032
DETAILS
Slide Material: Stainless Steel
Optics Footprint: RMR Pattern
Slide Finish: Sniper Green Cerakote
Front Sight: Ameriglo Lower 1/3 Co-Witness Sight, Serrated Black (Not a Night Sight)
Rear Sight: Ameriglo Lower 1/3 Co-Witness Sight, Black (Not a Night Sight)
Barrel Material: Stainless Steel
Barrel Thread: 1/2x28 TPI
Thread Protector Included
*Compatible with all PSA Dagger compact Frames and Gen3 compatible frames.
FEATURES
- MPN: DG01-51655130032
19 months ago
Product #: 384806 Manufacturer #: 1301-B556PM47.517(SS)
The AR-STONER pistol barrel features a 223 Remington (Wylde) chamber for full compatibility with surplus mil-spec ammunition or commercial 223 Remington ammunition. Constructed of 416 stainless steel and 7.5" long, this barrel is short and lightweight. This barrel also features a 1/2"-28 threaded muzzle for attaching a flash hider or muzzle brake.
Product Information
Cartridge 5.56x45mm NATO
Finish Stainless
Material 416R Stainless Steel
Length 7.5 Inches
Weight 1.1 Pound
Twist 1:7
Threads 1/2"-28
Barrel Contour M4
19 months ago
The 16” AR-STONER AR-15 9mm Barrel is the ideal balance of function, performance and affordability. Precisely milled from 416R Stainless Steel with a matte finish, this barrel gives your 9mm Carbine a sleek look with the function to match. The 1 in 10” twist provides superb accuracy and the M4 contour reduces overall weight. Build an AR-15 Carbine with the AR-STONER AR-15 9mm Barrel and shut out the competition.
Features:
Chambered in 9mm
M4 Contour barrel
Product #: 208121
Manufacturer #: 1523-B9MMCM416110SS
- MPN: 1523-B9MMCM416110SS
