Guntec

US Made T6 Aluminum New Micro Design Total Weight: 2.9 oz Length: 2 3/8″ Covers 1 3/8″ of the Barrel Threads begin approx 1.25″ down the shroud Dual Purpose Unit, Functions As A Barrel Shroud And A Muzzle Compensator! Slips Over Barrel And Threads Down From The Inside Multi Porting “Gatling Gun” Style Muzzle Comp Reduces Felt Recoil Up To 70 Percent Will Work On 9mm With 1/2 x 28 Thread Anodized Black Finish .223/ 5.56 Cal 1/2 x 28 Thread OD: 1.1875″ Designed for use on AR Pistols

Choose from 3 different sizes. T6 Aluminum Guntec slip over barrel shroud with Guntec slip over muzzle brake 1/2 X 28 Thread Multi Porting “Gatling Gun” Style Muzzle Comp Reduces Felt Recoil Up To 70 Percent Length: See Chart Below ID: 0.5″ US Made Slips Over Barrel And Threads On .223/ 5.56 Cal Anodized Black Finish Will Work On 9mm With 1/2 x 28 Thread OD: 1.1875″ Dual Purpose Unit, Functions As A Barrel Shroud And A Muzzle Compensator! Weight: 4 to 6 Oz

Description Guntec ar308 fake suppressor 5.5" 5/8x24 threads black Other Features: 5/8x24 reverse threads slip over style UPC#: 714569649470

With the Guntec USA AR-15 Ultra Lightweight Thin M-LOK Free Floating Handguard w/ Monolithic Top Rail, your shooting experience will be increased beyond what you ever thought was possible, due to its tight fit and ability to provide an unyielding grip. These AR Handguards & Forends, by the specialists at Guntec USA, are constructed from top rated components that will provide you long-lasting durability.

Manufacturer Guntec Usa UPC 714569647162 SKU 714569647162 Width 4.1000 Length 7.2500 Height 1.7000 Weight 0.5200 Ar-15 Accessory Y Dimension 1.55 X 4.05 X 8.65 Material Aluminum Size/finish 5" MATTE Type/color COMPRESSION FREEFLOATING BLACK Item: 714569647162

- Mil-Spec Buffer Tube Kit - Six Position Buffer Tube - End Plate, Castle Nut, 3 Oz CAR Buffer, &  Upgraded Chrome Silicon Spring - T6 Aluminum MPN#: MILTUBESET

Made for 7.62X51 / 308 Cal 9310 Hardened Steel Bolt, Hardened extractor S7 tool steel. Nickel Boron Finish 17-4 Stainless Steel Firing Pin (Heat treated to H900 Condition) The group comes fully assembled with properly torqued and staked gas key HPT/MPI Tested and Marked 8620 carrier and gas key Made in the USA

T6 Aluminum 1/2 x 36 Thread Multi Porting “Gatling Gun” Style Muzzle Comp Reduces Felt Recoil Up To 70 Percent Length: 5.5″ ID: 0.5″ US Made Slips Over Barrel And Threads On 9mm Cal Anodized Black Finish For 9MM With 1/2 x 28 Thread, Use Part #1326-MB-P OD: 1.1875″ Dual Purpose Unit, Functions As A Barrel Shroud And A Muzzle Compensator! Weight: 6 Oz Covers 4″ of Barrel, Extends Barrel 1.5″

Solid T6 Aluminum Body Pushes Flash Forward O.D Is 1.25″ Weight: 3.4 Oz 1/2 x 28 Thread Great For Use On AR-15 Pistols Fits Into Most Slimline Thin Free Floating Handguards Will Work For 9mm With 1/2 x 28 Threads Length: 3.25″ 5.56/.223 Cal Anodized Green Finish Gen 2 Slim Version

T6 Aluminum With Neoprene Coating Textured Grooves For A Non Slip Design Very Durable Slides Into KeyMod Grooves And Tightens Molded Finger Protector On Front Side Length: 4″Width: 1.25″ Lightweight

Machined From 6061 Billet Aluminum Grip Screw And Washer Included Designed To Conform To DOJ Criteria Please Consult Local Laws & Regulations To Ensure Compliance Total Weight: 6.4 oz Ergonomic Design Skeletonized Cut Out Design Ultralight Series Very Durable Anodized Red Finish

Made for 7.62X51 / 308 Cal 9310 Hardened Steel Bolt, 17-4 Stainless Steel Firing Pin (Heat treated to H900 Condition) The group comes fully assembled with properly torqued and staked gas key Tin Coated (Gold Titanium Nitride Finish) 8620 carrier and gas key. Made in the USA HPT/MPI Tested and Marked Hardened extractor S7 tool steel. Skeletonized Low Mass Design

Handguard Us Made Proprietary Barrel Nut Included M-Lok System Slides Over Barrel Nut, And Is Locked Up Against Receiver With 6 Screws Internal Diameter: 1.34 T6 Aluminum Body Total Weight Including Barrel Nut Is 10.8 Oz Tight Fit Up Against Receiver, Which Allows For A Monolithic Top 15″ Extended Length Ultra Light Weight M-Lok System Heavy Duty Gold Plated Finish Stock Just Released High Density Polymer Matte Black Finish Gold Plated Finish on Buffer Tube New Minimalist Design Lightweight 5.56 Caliber Version Accepts QD Sling Swivel On Left Or Right Side

US Made In Scottsdale, AZ Nitride Finish Reduces Felt Concussion In Close Quarters Length: 2.5″ Muzzle brake & Blast Shield Are Steel 1/2 x 28 Thread Great For Use On AR-15 Pistols OD : 1.5″ QD Blast Shield Threads Down Over Muzzle Comp 5.56 /.223 Cal & 9mm Cal Total Weight: 9.7 oz (Muzzle brake and Blast Shield)

US Made Stick Magazines Lightweight All Aluminum Body With Steel Inserts Insert Converts Standard 5.56 Accepts Colt Style SMG Mags Installs By Inserting In Bottom Of Standard Lower Anodized Matte Finish Lower Receivers To Accept 9mm Bolt Hold Open On Last Shot One Retention Screw On Top Of Adapter and Two Set Screws That Lock Into Wall of Magwell

US Made Anodized Purple Finish Total Weight Including Barrel Nut Is 8.9 oz!! Triangle / Diamond Skeletonized Cuts Throughout Handguard to Reduce Weight Machined QD Swivel Socket On Rear End Of Handguard (Right & Left Side) T6 Aluminum Body M-LOK Slots On 3 Sides of Handguard (Bottom, Left & Right Sides) Rail System Slides Over Barrel Nut, And Is Compressed Down Against Receiver With 4 Screws 12″ Length Internal Diameter: 1.32″ AIR-LOK Series – Compression Lock Down Design Proprietary Barrel Nut Included

US Made For .308 Cal Complete Front & Rear Takedown Pin Set CNC Machined Extended Knobs For Easy/Quick Takedown Anodized Red Finish

Handguard US Made Proprietary Barrel Nut Included M-Lok System Slides Over Barrel Nut, And Is Locked Up Against Receiver With 6 Screws Internal Diameter: 1.34 T6 Aluminum Body Total Weight Including Barrel Nut Is 10.8 Oz Tight Fit Up Against Receiver, Which Allows For A Monolithic Top 15″ Extended Length Ultra Light Weight M-Lok System Heavy Duty Black Chrome Finish Stock Just Released High Density Polymer Matte Black Finish Black Chrome Finish on Buffer Tube New Minimalist Design Lightweight 5.56 Caliber Version Accepts QD Sling Swivel On Left Or Right Side

As close to a real suppressor as you can get without paying for the tax stamp! The GunTec false silencer is CNC precision machined from solid aircraft grade aluminum with a durable hard black anodized finish. The innovative slip-over design will not extend the length of your firearm. This faux can will not reduce the sound of firing, but the additional muzzle weight will help tame recoil and keep your sights on target.

Guntec AR-15 15" Rainbow PVD Ultra Lightweight MLOK Handguard A handguard is the most functional and unique part of any AR-15 build. Free float handguards offer an incredible reduction in weight and include many features such as mounting systems M-Lok/Keymod or both! Having the barrel in a free floating handguard allows you to retain zero and have an increased level of accuracy. And having the ability to add grips, laser systems, lights, and bipods will further increase the capability of your next build.