ODIN Works

Description The ODIN Works Super Lite 9mm PCC barrels are the best “high speed, low drag” barrels you will find on the market.  Made in Boise, ID from 416 stainless and 6061 aluminum, these barrels look and shoot great.  At the heart of the system is a 5.5″ 9mm barrel made from 416 stainless steel.  Finishing the barrel off, the anodized aluminum shroud is permanently attached giving the shooter a Super Lite 16″ barrel, so no pistol braces or SBR stamps are needed.  If you want to go fast, look good, and cut weight, this barrel is the one for you. Technical Specs - Length: 16″

The Odin Works complete lower parts kit is a mil-spec or better LPK with well-machined components. Technical Specs 31 piece set to complete a lower. Machined parts, no MIM. Hammer 8620 Steel Trigger 8620 Steel Disconnector 4340 Steel Trigger Pin 4140 Steel Bolt Catch 4340 Steel Polymer Pistol Grip SKU#: 1590

GNS-933-007 The Atlas Blast Shield works on the Odin Works Atlas Compensator to make a more pleasant shooting experience. This muzzle device accessory diverts gas and sound forward and reduces shooter perceived muzzle report. The Atlas Blast Shield is made from stainless steel and adds minimal weight to your Odin Works Atlas. Specifications and Features: Diverts gas and sound forward 1.75oz Fits Odin Works Atlas Compensators ONLY Fits inside all ODIN forends except the RAGNA. Screws and Tools included 303 Stainless Steel

Odin Works 9mm Luger AR9 Pistol Barrel - 10.5in - Silver - The Odin Works 9mm barrel features the stylish look that Odin barrels are known for. Made for blowback AR9s, this barrel is turned from 416 stainless steel and covers all of your PCC barrel needs.    Made Of 416 Stainless SteelDesigned For Blowback AR BuildsWorks With Colt Or Glock Lowers½-28 Muzzle ThreadsMedium ProfileButton 1:10 Rifling MPN#: B-9MM-10 1667656

Description

Description

The modular design of the AR-10 allows many parts to be upgraded with ease. The forend is one of the parts that is usually removed first. When the factory AR-10 handguard is replaced with the ODIN Works 17.5″ M-LOK 308 O2 Lite ‘Low Profile’ Handguard, it lowers the weight considerably. The ODIN Works O2 Lite was designed from the ground up to work with the most common DPMS type AR-10 uppers. There are two upper receiver configurations, the High Profile, and the Low Profile. The high profile receiver has a height of 2.06″ inches, whereas the low profile receiver is 2.00 inches in height.

Known for many years as one of the best companies around for manufacturing AR-15 accessories, Odin Works has now entered the AR-15 rifle market by introducing the OTR-15 rifle. Leveraging a decade of building accessories for the AR-15 series of rifles, it stands to reason that Odin Works would bring all of their experience to bear and produce a stunning AR-15 of their own. Features: Caliber: .223/5.56 NATO Action: Semi-Automatic Safety: Odin Works Ambi-Safety Frame: Forged Stainless Steel Stock: B5 Bravo w/ Stock Stop Barrel: 16 Inches Grip: B5 Pistol Grip

The ODIN Works Super Lite 9mm PCC barrels are the best "high speed, low drag" barrels you will find on the market.  Made in Boise, ID from 416 stainless and 6061 aluminum, these barrels look and shoot great.  At the heart of the system is a 5.5" 9mm barrel made from 416 stainless steel.  Finishing the barrel off, the anodized aluminum shroud is permanently attached giving the shooter a Super Lite 16" barrel, so no pistol braces or SBR stamps are needed.

The ODIN Works Super Lite 9mm PCC barrels are the best "high speed, low drag" barrels you will find on the market.  Made in Boise, ID from 416 stainless and 6061 aluminum, these barrels look and shoot great.  At the heart of the system is a 5.5" 9mm barrel made from 416 stainless steel.  Finishing the barrel off, the anodized aluminum shroud is permanently attached giving the shooter a Super Lite 16" barrel, so no pistol braces or SBR stamps are needed.

Odin Works 9mm Luger AR9 Pistol Barrel - 5in - Silver - A blast to shoot, Odin's new 9mm 5in barrel will take your AR pistol game to a whole new level. Made from quality 416R Stainless Steel and machined in-house to their strict specifications, this barrel out performs even its toughest competitors. Worried about feed issues? Don't. Their calibrated chamber ramp guarantees effortless shooting. Whether you want to run a short barrel with their 4in forend or tack on a suppressor and a tad longer hand guard, you the choice is yours and you cannot go wrong.

SKU B-9MM-16-SL-BLK Product Type Barrel Manufacturer Odin Works Barrel Length 16" Caliber 9mm 1667604

Odin Works AR-15 XCH Complete Extended Charging Handle - Orange - Replace or upgrade your current AR-15 platform charging handle in one easy step. The XCH Complete Extended Charging Handle by Odin Works makes charging your AR easier than ever. Large scopes or thick gloves can create a challenge when charging your rifle. The extended latch, with its ergonomic design, allows for faster and smoother operation of the charging handle.   Ergonomic Design For Easy Gripping7075 Billet AluminumAR-15 Platform MPN#: ACC-CH-XCH-AR15-OR 1667697

Lightweight and minimalist AR-15 rifles are one of the most popular styles to build due to their simplicity. The Odin Works Zulu 2.0 stock is one of the best when it comes to simplicity. Featuring nothing more than a proprietary buffer tube and an aluminum stock extension with a Limbsaver recoil pad. The buttstock is made from 6061 aluminum, so it is still extremely durable. The intermediate length buffer tube is padded to give you a comfortable cheek weld and utilizes a secondary buffer system that helps to reduce recoil.

6061 Aluminum construction with Limbsaver recoil pad Secondary Buffer System Reduces Recoil Weight: 1.23 lbs Available in black, blue, orange, red and FDE cerakote MPN#: OS-ZULU-KIT-RED SKU#: 2304

Odin Works Intermediate 6.5 Grendel Rifle Barrel - 18in - Silver - Odin Works have developed some of the most cutting edge designs on the market today. Some designs may look similar but it is really when you get your hands on their product that you experience the difference.   Includes .750 Gas Block And Intermediate Gas TubeMade From 416R Stainless Steel Hand LappedProfile: DMR Heavy Profile (.850 Behind Gas Block, .745 In Front)Gas Placement: IntermediateRifling: Button 8 TwistWeight: 2.43 lbsM4 Feed Ramps5/8-24 ThreadingSAAMI Spec Chamber1in MOA Guaranteed MPN#: B-6.5-18-INT-TG 1667654

Odin Works Super Lite 9mm Luger Rifle Barrel - 16in - Blue - The Odin Works Super Lite 9mm PCC barrels are the best "high speed, low drag" barrels you will find on the market.  Made from 416 stainless and 6061 aluminum, these barrels look and shoot great. At the heart of the system is a 5.5in 9mm barrel made from 416 stainless steel. Finishing the barrel off, the anodized aluminum shroud is permanently attached giving the shooter a Super Lite 16in barrel, so no pistol braces or SBR stamps are needed.

Odin Works Atlas 9mm Luger 1/2-28 Thread Compensator - Silver/Black - When it comes to muzzle devices, ODIN Works brings true innovation with the ATLAS Compensator family. The ATLAS features a 3-piece modular design that makes installation simple and fast. The core and the cap are machined from 416R stainless steel and black nitrided while the sleeve is made from titanium. Timing and tuning is done with the titanium sleeve, no shims or crush washers needed.   Titanium SleeveBlack Nitride Stainless Steel1/2-28 Thread   MPN#: MB-ATLAS-9-28 857392006895 1667611

Odin Works Pistol Length Gas Tube - This gas tube is sized for your pistol.   Model: GT-PISTOL

Odin Works 3-Gun 223 Wylde Rifle Barrel - 18in - Silver - 223 Wylde is a hybrid of the 223 REM and 5.56. 223 Wylde has a chamber throat that is tighter than the 5.56 achieving better accuracy but still reliably functional with 5.56 ammunition. All DI barrels include stainless steel tunable gas block.   Includes Tunable Low Profile Gas BlockMade From 416R Stainless SteelHand-LappedGas placement: RifleProfile: 3-GunM4 Feed Ramps1/2-28 ThreadingRifling: Button 8 Twist1in MOA Guaranteed MPN#: B-223-18-3G-R-TG 857392006512 1667618