Description
- 843829136006 - Vortex Venom 1-6-24 SFP 30mm AR-BDC3 LPVO
- 875874004702 - Vortex Cantilever Ring Mount for 30mm
- NBS .223/5.56 Bolt Carrier Group - Black Nitride
- NBS AR-15 Stripped Upper
Vortex Venom BDC3 MOA 1-6×24 SFP Scope 30MM & Sport Mount Bundle
Venom 1-6×24 Second Focal Plane Riflescope – BDC-3 (MOA) Reticle (VEN-1601)
When you’re ready to maximize your capabilities, the Venom 1-6×24 SFP delivers the downrange accuracy, workhorse function, and speed you need for opening the throttle on close- to mid-range engagements. Water, fog, and shockproof. Great glass quality. The illuminated BDC3 reticle makes for quick target acquisition. Standard throw-lever delivers on-the-fly magnification. For entry-level users, it’s a hardworking LPVO built to get you in the game.
BDC-3 (MOA) Reticle
Improved for ranging distances and holdovers and illuminated for clarity in low light.
Use the ranging feature at the top of the reticle to range a silhouette target up to 600 yd.
BDC subtensions accurately shoot targets from 20-650 yards.
5 MPH wind increments
Elevation & Windage Turrets
The Venom1-6×24 SFP riflescope comes equipped with capped Elevation and Windage Turrets. This protects the turrets from accidental adjustment while out in the field, in transit, or in storage. You will need to remove the caps prior to making any adjustments on the turrets.
Use turrets to adjust the point of impact. The Venom 1-6×24 SFP riflescope uses a 1/4 MOA adjustment on both the Windage and Elevation Turrets. Each click will move the point of impact roughly 0.25″ at 100 yards for MOA. The turret on the top of the riflescope is the Elevation Turret, which is used to adjust the point of impact up and down. The turret on the righthand side of the riflescope is the Windage Turret and is used to adjust the point of impact left and right.
NBS .223/5.56 Bolt Carrier Group – Black Nitride
The NBS .223/5.56 Black Nitride Bolt Carrier Group was designed with strength in mind. Starting with a 9310 Steel Bolt, which is aircraft-grade material, this bolt has a high core strength rating, a high fatigue strength, and a high hardenability rating. 9310 steel, when treated properly, is about 7% better than Carpenter 158 steel, so you know that you will have a dependable BCG, when you drop this into your rifle.
This NBS BCG (Bolt Carrier Group) has been Nitrided, so that it can provide a long-lasting experience, and provide a significant upgrade to your AR-15. These BCG’s have also been Magnetic Particle Inspected and have been made to Mil-Spec Standards. It also has Mil-Spec 8740 Steel hard-chromed Firing Pins, Mil-Spec Gas Keys with Grade-8 screws that are staked and sealed with Permatex No.3, and they have shot-peened case-hardened D2 tool steel extractors. Plus, with the AR15Discounts satisfaction guarantee, you can buy your AR build components without apprehension. Our guarantee says if you are unhappy for any reason, you can send it back to us within 30 days for a full refund. No worries.
NOTE- The Salt Black Nitride BCG offers the dark, subdued finish that doesn’t change the specs of the Bolt Carrier, but it still makes the outside of the Bolt Carrier harder. This treatment increases the longevity of the part, makes it extremely wear resistant and durable, and this treatment protects the part from corrosion.
Technical Specs:
• Gas system: Direct Impingement
• Caliber: 5.56x45mm NATO/.223 Rem, .300 Blackout
• Finish: Salt Black Nitride
• Bolt: 9310 Alloy Steel (High Hardness)
• Carrier: 8620 Aircraft Grade Steel
• Extractor: Shot Peened and Case Hardened D2 Tool Steel
• Firing Pin: Mil-spec 8740 steel with hard chrome finish
• Gas Key: Mil-Spec w/ properly staked Grade-8 screws & Permatex No. 3 sealed
• Cam Pin: 8620 Steel w/ Black Nitride Finish
• Quality Control: MPI Inspected for QC
Mil-Spec Stripped Upper Receiver
Looking for a top quality Upper Receiver at wholesale prices? The NBS AR-15 Stripped Upper machined by one of the foremost manufacturers of mil-spec AR-15 components in America. Normally these stripped uppers are only available to builders when purchased from a name brand at a substantial markup, but we’re making these available at wholesale prices.
What makes this upper different from other “Mil-Spec” upper receivers?
Machined from top tier forgings.
Shot blasted prior to anodizing which results in a finish which is more consistent, durable and uniform. No chalky or purplish anodizing.
Slightly chamfered lug holes for quick and easy takedown/pivot pin engagement.
Quality assurance program that exceeds industry standards.
Features:
7075-T6 Forged Aluminum
Black Anodized finish
Flat-Top
Mil-Spec dimensions for guaranteed fit with any mil-spec lower receiver
M4 Feed Ramps
Backed by our 30 Day Satisfaction Guarantee. You can install it, run it, beat it up and if you’re not happy for any reason, send it back within 30 days for a refund.
SKU: BUNDLE-VENOMBU
Explore more Scopes Vortex deals.
