TRYBE Defense Magnite Go Fast Ultra Lightweight Handguard, Full Top Rail, M-LOK, FDE, 9in - $36.65 (Free S/H over $49 + Get 2% back from your order in OP Bucks)

Description

Get Back $$$ in OP Bucks With Your Purchases - More info HERE -

TRYBE Defense is excited to announce the next evolution of handguard technology with the introduction of the Magnite Series of handguards. Magnite is a magnesium alloy that is just as strong as 6061-T6 Aluminum but weighs 30% less. So, if you're looking to lighten up your existing build or make that ultra-light build a reality, then the TRYBE Defense Magnite handguards are the only way to go. The Go Fast Ultra Lightweight model is exactly what it sounds like: a design made to reduce weight to an absolutely insane minimum. A handguard that has both slick design and M-LOK functionality is the standard for all lightweight builds. Don't believe how insanely light Magnite is? The below are all real numbers of the weights of these handguards (without the barrel nut or screws): - TRYBE Go Fast Ultra Lightweight Full Rail 7" Weight: 3.06oz - TRYBE Go Fast Ultra Lightweight Full Rail 9" Weight: 3.79oz - TRYBE Go Fast Ultra Lightweight Full Rail 12" Weight: 4.86oz - TRYBE Go Fast Ultra Lightweight Full Rail 15" Weight: 5.94oz Pick up the TRYBE Defense AR-15 Magnite Go Fast Ultra Lightweight M-LOK Handguard with Full Top Rail and feel for yourself. If you want this same handguard but with a cut top rail, do not fret! Check out the TRYBE Defense AR-15 Magnite Go Fast Ultra Lightweight M-LOK Handguard with Cut Top Rail and find the length and finish you need. Installation Instructions Handguard Installation instructions In order to install your new handguard, you will need the following tools: 30mm Wrench 5/32" Hex Screwdriver Thread Locker (optional) Once you have installed your barrel in your upper receiver, thread the barrel nut onto the upper and tighten down to 35-65 foot pounds. After you have installed your gas block and tube assembly, slide the handguard over the barrel nut. You may apply Loctite to the exterior of the barrel nut across the knurled surface for added grip. You will need to apply some force to the rail when going over the barrel nut as the knurling is designed to mar the interior surface of the rail, adding additional grip. Align the rail with your receiver and put the mounting screws in the drilled holes from the left side of the upper receiver and proceed to tighten them down to 3 foot-pounds (36 inch-pounds). Do not torque screws more than 3 foot-pounds. Exceeding this force may strip the threads. Once you have this bad boy assembled to your upper the only thing left to do is skip off into that warm, dewy sunset together and start sending some unencumbered lead down range. And don't sleep on all of the other AR Parts you need to keep your rifle looking fierce and operating at a high level, including a wide variety of Handguards and Upper Receivers. But don't stop there. Feast your eyes on all the other high-quality parts and accessories the innovators at TRYBE Defense have to offer. From fully assembled Bolt Carrier Groups and ambidextrous Charging Handles and Safety Selectors to high-performance adjustable Drop-In Triggers and ultra-effective Muzzle Devices. And our hyper-accurate, long-lasting Rifle Barrels and durable Grips & Handstops will keep those groupings tight! And if you're looking for something with a little extra suppression power the brand new TRYBE Defense Cowl Induction Muzzle Brakes will leave you utterly amazed. Just don't forget to wipe the drool off your chin. And you're going to need something to carry all that swag. Finish it off with a TRYBE Tactical 42" Rifle Case to wrap your rifle in soft, cushy protection. If you're toting a load of gear, the spacious TRYBE Tactical Range Bag has all of the right pockets to keep you well supplied and organized. For other quality gear to carry and protect everything you'd need for a day at the range check out the premium field accessories that your loyal friends at TRYBE Tactical and TRYBE Optics have for you. Start customizing today and get ready to JOIN. THE. TRYBE.
Specifications for TRYBE Defense AR-15 Magnite Go Fast Ultra Lightweight M-LOK Handguard w/ Full Top Rail:
Manufacturer: TRYBE Defense
Finish: Heat Treated
Fabric/Material: Magnite Magnesium Alloy
Gun Make: AR Platform
Gun Model: AR-15
Gun Type: Rifle
Attachment/Mount Type: M-LOK
Gun Rail: Full Top Rail
Condition: New
Included Accessories: Barrel Nut and Mounting Screws
Inner Diameter: 1.37 in
Quantity: 1
TRB-HZ-EL8X-MGHDG-V2-9FR-FDE
UPC#: 810030583462