Description
This is made by Zev
This trigger was designed to bridge the gap between the multitude of two stage triggers intended for duty use, and single stage competition triggers.
The trigger’s engagement, over travel and reset can be adjusted to personal preference. One of the most unique design factors of the trigger used in our PWS MK1 MOD 2s, is that all adjustments are under detent retention which eliminates the need for thread locker and the possibility of failure from vibration or improper installation. Each unit ships with two hammer springs allowing for a 5lb to 5.5lb trigger pull weight or a 3lb to 3.5lb trigger pull weight depending on which hammer spring is used. The trigger bow has been extended for a better user interface allowing the pad of the finger to easily find its natural position when firing.
Features:
Easy User Install Providing A Crisp Single Stage Trigger Break (Install instructions can be found here)
Adjustable to Most Lower Receivers for Sear Engagement and Over Travel
Adjustable Reset For User Preference
Detent Retained Adjustment Screws
Durable PVD TiCN, Copper Coating
3.5lb or 5.5lb Trigger Pull Depending on Hammer Spring Used
Extended Trigger Pad
