Barrels Gun Parts

(913 deals total)

5.5" Straight Profile Barrel 9mm | 1/2 X 36 This 9mm 5.5 inch Straight Profile Barrel is machined from 4150 Chrome Moly Vanadium steel with a QPQ Corrosion Resistant Finish. This 5.5” barrel is a fully machined barrel precision-crafted from 4150 Chrome Moly Vanadium, rifled with a 1:10 twist and QPQ coated inside and out.

This 9mm chambered 8.3 inch Barrel is machined from 4150 Chrome Moly Vanadium steel with a QPQ Corrosion Resistant Finish and QPQ coated M4 feed ramp extension. Quench Polish Quench (QPQ) is a specialized type of nitrocarburizing case hardening that increases corrosion resistance. It is sometimes known by the brand name of Tufftride, Tenifer Black Nitride or Melonite. QPQ is a huge improvement over Chrome Lined barrels. Unlike chrome lining, where the chrome is built up on the surface, QPQ converts the surface without the risk of dimensional build up. Length - 8.3"

This 9mm 4.5 inch Straight Profile Barrel is machined from 4150 Chrome Moly Vanadium steel with a QPQ Corrosion Resistant Finish. This 4.5” barrel is a fully machined barrel precision-crafted from 4150 Chrome Moly Vanadium, rifled with a 1:10 twist and QPQ coated inside and out. The result is an accurate barrel that stays that way without chipping or peeling coatings and little risk of damage from corrosion, regardless of your operating environment. **These barrels do not have index pins** Length - 4.5" Material - 4150 Chrome Moly Vanadium Profile - Straight

Unleash the full potential of your firearm when you upgrade your barrel to the Ballistic Advantage Modern Series 5.56 AR Rifle Barrel. Sturdy as can be, these Rifle Barrels by Ballistic Advantage are constructed out of 416R stainless steel and topped off with a QPQ corrosion resistant finish. Plus, the Ballistic Advantage 5.56 Modern Series Threaded Barrel easily shoots sub-MOA, ensuring pinpoint accuracy with each pull of the trigger.

Description Here at AR15Discounts.com we work with a wide variety of machine shops and barrel manufacturers. When we come across a barrel maker we like, we will often decide to private label those barrels for resale under the NBS brand. We purchase these barrels in large quantities and then pass the savings on to our customers. Why buy an NBS Brand Barrel: - American Made – Sourced from a variety of Tier 1 Manufacturers here in the United States - Quality Control – All barrels are manufactured under ISO-9001 or better quality standards

Description Our 5.56 chambered 13.7inch Government Profile Mid-Length Modern Series Barrel is machined from 4150 Chrome Moly Vanadium steel with a QPQ Corrosion Resistant Finish and QPQ coated M4 feed ramp extension. SKU BABL556033M Length 13.7″ Material 4150 Chrome Moly Vanadium Profile Government Finish QPQ Corrosion Resistant Twist Rate 1:7 inches Gas System Length Mid-Length Gas Block Journal .750″ Muzzle 1/2×28 Threaded Weight 25oz Weight 1.687 oz MPN BABL556033M Finish Nitride / Melonite Barrel Profile Government / SOCOM Gas System Length Midlength

This .300 Blackout chambered 16 inch barrel is machined from 4150 Chrome Moly Vanadium steel with a QPQ Corrosion Resistant Finish and QPQ coated M4 feed ramp extension.

Polymer80 RL556V3 AR-15 Blank - Black The RL556v3 features Polymer80's proprietary polymer composite, a solid core design, flared magwell, and beefier mil-spec buffer tube housing. The pistol grip area features a unique thread less design specific to Polymer80 rifle lowers. INCLUDED 80% Polymer AR15 Lower Blank (Mil-spec) Hex Key Set Screw Grip Nut Grip Screw Bolt Catch Pin NOTE: 80% Blank(s) Cannot Be Purchased With Any Other Product(s) And Must Be Its Own Individual Order, Otherwise, The Order Will Be Cancelled At Omega Tactical Distribution's Discretion

This 9mm 4.5 inch Straight Profile Barrel is machined from 4150 Chrome Moly Vanadium steel with a QPQ Corrosion Resistant Finish. This 4.5” barrel is a fully machined barrel precision-crafted from 4150 Chrome Moly Vanadium, rifled with a 1:10 twist and QPQ coated inside and out. The result is an accurate barrel that stays that way without chipping or peeling coatings and little risk of damage from corrosion, regardless of your operating environment. **These barrels do not have index pins** Length - 4.5" Material - 4150 Chrome Moly Vanadium Profile - Straight

10.5" Government Barrel 5.56 .223 for AR-15 (Carbine) This 5.56 chambered 10.5 inch Government Profile Barrel is machined from 4150 Chrome Moly Vanadium steel with a QPQ Corrosion Resistant Finish and QPQ coated M4 feed ramp extension. This 10.5” barrel is a fully machined carbine-length barrel precision-crafted from 4150 Chrome Moly Vanadium, rifled with a 1:7 twist and QPQ coated inside and out. The result is an accurate barrel that stays that way without chipping or peeling coatings and little risk of damage from corrosion, regardless of your operating environment.

AR15 BARREL 556 16IN ULTRALIGHT BARREL ASSEMBLY 16" 5.56 NATO barrel - Marked "BFI 5.56 NATO 1/8" Black Nitride Finish Pencil Contour 1:8" Twist Threaded 1/2"x28 Carbine Length Flattop Gas Block with Bayonet Lug and Sling Swivel Barrel Nut and Round Handguard Cap Included Weight as Shown: 28.2 oz. Insulated M4 Handguard Included. BUSB2

9mm 8.5" length 4150 steel with QPQ nitride finish Colt® and Glock®-compatible feed ramps 11º target crown 1/2x28 thread Fully stress-relieved, air gauge-tested, and magnetic particle inspected Made in USA Item # WX2-710089 Mfg. Number: 15A910N8NLQ UPC: 816341020788

Turn heads with this awesome oilslick PVD finish on this premium 223 wylde Ar-15 barrel. Features: - Ar15 Barrel - 416r stainless steel - 223 wylde chamber (shoots 556/223) - 1/8 twist - 1/2-28 threads - Mid length gas - twist fluting pattern - 17.1" length Item #: 17twistrainbowbarrel

DISCLAIMER: This product is not manufactured, authorized, endorsed, or warranted by GLOCK. GLOCK does not warrant or represent that this product is compatible with GLOCK pistols. Trybe OPMOD Pistol Barrel, Glock G19 Gen 1-5, 1-10 Twist, Non-Threaded, Black Nitride Finish, 3019-BLK Color: BlackFinish: NitrideFabric/Material: 416R Stainless SteelCartridge: 9mm LugerGun Make: GlockGun Model: Glock 19Barrel Length: 4.02 inBarrel Twist Rate: 1-10Weight: 0 - 0.49 grain, 0.4 lb Code: 99-BPI-O0629-3019-BLK Product Info for Trybe OPMOD Glock 19 Non-Threaded Pistol Barrel

This 5.56 chambered 7.5 inch Pistol Barrel is machined from 4150 Chrome Moly Vanadium steel with a QPQ Corrosion Resistant Finish and QPQ coated M4 feed ramp extension. Length - 7.5" Material - 4150 Chrome Moly Vanadium Profile - DRP Finish - QPQ Corrosion Resistant Gas System Length - Pistol Gas Block Journal - .750″ Gas Block Journal Twist Rate - 1/7 Twist Muzzle - 1/2x28 Threaded Weight - 17 oz SKU#: RTB55675M

Shaw's OEM division has been in the AR barrel making game for decades supplying finished and semi-finished product to major companies within the industry. Shaw is now proud to offer complete barrels directly to consumers. All AR-15 and AR-10 barrels are machined from 416R stainless steel and are designed to use low profile gas blocks. 223 Wylde and 5.56 NATO barrels feature barrel extensions with M4 feed ramps. Specifications for Shaw 223 Wylde Hbar Helical Flute: Color: Silver Fabric/Material: Stainless Steel Caliber: .223 Wylde Barrel Profile: HBAR Threads per Inch: 1/2x28

Get a top-shelf upgrade for your firearm with the Ballistic Advantage Premium Series AR Rifle Barrel. These Rifle Barrels by Ballistic Advantage boast a shoulder-less design that symmetrically limits barrel whip and allows the barrel to quickly return to its home position. In doing so, it is much easier to land follow-up shots with a high rate of fire. Another fantastic feature of the Ballistic Advantage Hanson Series AR Barrel is that it has a QPQ corrosion resistant finish which will preserve the quality of your barrel and rifle for significantly longer than stock options.

ELD Performance AR-15 16" .350 Legend, Carbine Gas, 1:16T, 5/8x24 Nitride Barrel

ELD Performance Faris .308 Win 20" Medium Profile 1:10T 416R Stainless Steel 5/8x24 Barrel BARREL INFO:

ELD Performance LR-308 18" .308 WIN, Rifle Gas, Medium Profile, 1:10T, Nitride Barrel BARREL INFO:

If you're ready to upgrade your pistol barrel to a gorgeous match grade barrel at an amazing price, then look no further. The TRYBE Defense Sig Sauer P320 Compact Match Grade Threaded Pistol Barrel is sure to please even the most ardent and exacting operator. Made from coated 416-R stainless steel and heat treated for hardness and durability, your pistol will be running at peak performance with this ultra-precise match grade aftermarket barrel addition! Don't just upgrade your P320 Compact pistol with this nasty barrel.

DISCLAIMER: This product is not manufactured, authorized, endorsed, or warranted by GLOCK. GLOCK does not warrant or represent that this product is compatible with GLOCK pistols. Tactical Kinetics 9mm Glock 19 Compatible Nitride Barrel - Cosmetic Blem SPECIFICATIONS: Brand: Tactical Kinetics Model: 9mm Glock 19 Compatible Nitride Non Threaded Barrel Model Compatibility: 19 Gen Compatibility: 1, 2, 3 Caliber: 9x19 Material: 4140 CMV Finish: Black Nitride Threaded: No

Here at AR15Discounts.com we work with a wide variety of machine shops and barrel manufacturers. When we come across a barrel maker we like, we will often decide to private label those barrels for resale under the NBS brand. We purchase these barrels in large quantities and then pass the savings on to our customers. Why buy an NBS Brand Barrel: American Made – Sourced from a variety of Tier 1 Manufacturers here in the United States Quality Control – All barrels are manufactured under ISO-9001 or better quality standards

The Ballistic Advantage Modern Series AR-15 barrel is combines the durability and strength of 41V50 chrome moly vanadium steel with the exceptionally corrosion resistant QPQ treatment. This provides not only an impressive barrel life but ensures excellent accuracy and an affordable price. Every Ballistic Advantage barrel is guaranteed to give sub Minute of Angle accuracy with match grade ammunition. This 16" pencil contour barrel is chambered for 5.56 NATO ammunition and is ready to accept your favorite ..625" gas blocks.

DISCLAIMER: This product is not manufactured, authorized, endorsed, or warranted by GLOCK. GLOCK does not warrant or represent that this product is compatible with GLOCK pistols. Please check out all our other DEALS: ARM OR ALLY GUN DEALS click the link above. - Made in the USA - Glock 19 & 17 Gen 1-4 compatible - 416R Stainless Steel - 6 Groove, 1:10 Twist Conventional Rifling - SAAMI Spec 9mm Chamber - DLC, Stainless, PVD, or TiN finishes - Non Threaded, Threaded, or Ported

DISCLAIMER: This product is not manufactured, authorized, endorsed, or warranted by GLOCK. GLOCK does not warrant or represent that this product is compatible with GLOCK pistols. Need a replacement barrel for your Glock 19? Building a new pistol from scratch? Swenson has you covered with the Glock 19 stainless steel barrel. This 1/2"-28 threaded barrel is drop in ready for your Glock 19 Pistol. Features: - 416R Stainless Steel - 1/2"-28 Threaded Muzzle - 4.56" Length - 1:16 Twist - Fits Gen 1-4 MPN#: 150467 1580-BGL91919(SS)TH-TC

The Expo Arms AR-15 Barrels are designed to give you a premium barrel at an affordable cost. This AR barrel is made from Mil-Spec 11595E certified 4150 steel and features a fully Nitrided bore and exterior for corrosion resistance. This 13.95” model features a government contour with a mid-length gas system and .0785” port diameter for reliable function. Additionally, the .750 gas seat diameter is dimpled for securely attaching set screw gas blocks.

Description Here at AR15Discounts.com we work with a wide variety of machine shops and barrel manufacturers. When we come across a barrel maker we like, we will often decide to private label those barrels for resale under the NBS brand. We purchase these barrels in large quantities and then pass the savings on to our customers. Why buy an NBS Brand Barrel: - American Made – Sourced from a variety of Tier 1 Manufacturers here in the United States - Quality Control – All barrels are manufactured under ISO-9001 or better quality standards

DISCLAIMER: This product is not manufactured, authorized, endorsed, or warranted by GLOCK. GLOCK does not warrant or represent that this product is compatible with GLOCK pistols.

AFTERBURNER™ + RAMJET™ together reduce recoil up to 44% when using 115g ammunition. At only .47” long, the AFTERBURNER offers unprecedented performance in a micro compensator and is more effective than the majority of full-size compensators on the market. The INTRA-LOK™ mounting system uses the taper lock principle: a tapered locking pin interfaces with an angled V-groove on the underside of the barrel. This perfectly times the compensator as it locks down onto the V-shaped profile on the muzzle end of the barrel. Angled front faces on the Afterburner aid in holstering.

Description Here at AR15Discounts.com we work with a wide variety of machine shops and barrel manufacturers. When we come across a barrel maker we like, we will often decide to private label those barrels for resale under the NBS brand. We purchase these barrels in large quantities and then pass the savings on to our customers. Why buy an NBS Brand Barrel: - American Made – Sourced from a variety of Tier 1 Manufacturers here in the United States - Quality Control – All barrels are manufactured under ISO-9001 or better quality standards

Barrel Length: 16 in Code: 11I-BRI-RUS76239-15A78M16NGQ MPN: 15A78M16NGQ UPC: 816341023369

Description In the ever-advancing pursuit of accuracy, the traditional 308 is losing ground to the soft recoil and long range capabilities of the 6.5 Creedmoor. Our 6.5 Creedmoor Hybrid barrels have the accuracy and balance you need to push the limits of your 308-AR, giving you a long range edge over the competition. Backed by our satisfaction guarantee, Criterion 6.5 Creedmoor Hybrid barrels have the consistency and craftsmanship you depend on to perform at the highest level.

The Expo Arms Combat Series AR-15 Barrels are designed to give you a premium barrel at an affordable cost. This AR barrel is made from Mil-Spec 11595E certified 4150 steel and features a chrome lined bore to withstand high temperatures for a long barrel life. This 10.3” model features a SOCOM profile with a carbine gas system and .070” port diameter for reliable function. Additionally, the .750 gas seat diameter is dimpled for securely attaching set screw gas blocks.

Description .243 Winchester | 22″ 416R Stainless Steel Light-weight Barrel | 1:8 Twist | Rifle Length Gas System Description: The AR-10 Barrel is a 22″ light-weight profile barrel made of 416R steel with a stainless steel finish, a rifle length gas system with a 1:8 twist rate. The barrel is chambered in .243 and machined with AR-10 feed ramps in the barrel extension. This barrel features our lightweight barrel profile which reduces weight by 1 lb. over traditional contours. - Weight: 2.8lbs - Length: 22″ - Twist: 1:8 - Finish: Stainless - Thread Pitch: 5/8″x24

Item #: Upgrade your Ar15 build with this 17″ mid length barrel, with unique twist fluting. Finished in Titanium Nitride / PVD gold color. Features: .223 wylde chamber (shoots 556/223) 1/8 twist mid length gas 416r stainless 1/2-28 threads twist spiral fluting pattern

DISCLAIMER: This product is not manufactured, authorized, endorsed, or warranted by GLOCK. GLOCK does not warrant or represent that this product is compatible with GLOCK pistols.

This 4.5 inch Kaw Valley Precision 9MM Barrel is button rifled out of 4150 CMV Steel, QPQ Salt Bath Nitrided, with an 11-degree target crown for the best accuracy and durability possible for your SBR or 9mm AR pistol build! KVP 9MM barrels have an integrated feed ramp and will work with both Colt and Glock style AR-9 rifles or pistols. All barrels are manufactured under ISO:9001 & AS:9100 quality certifications. Barrel Material: 4150 CMV Steel Barrel Type: Button Rifled Barrel Caliber: 9MM SAAMI (9x19mm Parabellum) Barrel Twist: 1:10 Barrel Length: 4.5”

5.5 inch 40 S&W Pistol Caliber AR-15 Barrel, 4150 CMV and Nitrided, 1/16 Twist, Medium Contour Barrel Profile - made by Tactical Kinetics. Our Tactical Kinetics AR platform barrels are constructed from the finest domestically sourced steels, are drilled, reamed, and button rifled, and then profiled and chambered to exacting dimensions in compliance with SAAMI Specifications. Our high-precision manufacturing processes ensure both accurate and repeatable performance for thousands of rounds. Weight 0.75 Length 5.5 Profile Medium Twist 1:16 Finish Nitride Material 4150 CMV

Glock 17 Compatible Threaded Barrel, 9mm, Stainless Steel, Black Nitride General Barrel Info: Glock compatible barrels are designed to be readily dropped in with variations in stainless, nitride, fluted, ported, and threaded. The simplicity of Glock compatible barrels makes it hard to not try the next best-looking option for your next build.

MPN#: APRH100147C This 20" rifle length barrel is the perfect addition to your .308 build. Crafted to mil- spec standards from 4150 Chrome Moly Vanadium with a QPQ corrosion resistant finish, this barrel provides time tested precision and accuracy for your .308 rifle build. This barrel is HP and MPI tested. SPECS Specs Caliber .308 Winchester Barrel Length 20" Barrel Material 4150 Chrome Moly Vanadium Barrel Finish QPQ Corrosion Resistant Gas System Length Rifle Gas Block Journal .750" Gas Port Size (inches) 0.0860 Barrel Rifling Button Rifling Twist Rate 1:10 inches

DISCLAIMER: This product is not manufactured, authorized, endorsed, or warranted by GLOCK. GLOCK does not warrant or represent that this product is compatible with GLOCK pistols. Faxon Firearms barrels are the pinnacle of value. Manufactured 100% in-house from cradle-to-grave, these barrels are fully stress relieved, air-gauge tested, and 11 degree target crowned to ensure superior accuracy.

DIY Pistol Kits: Bear Creek SIG P320 Compatible Barrel, 9MM, 4.7", Black Nitride, Fits Full Size P320/M17 + Live Free Armory LF320 Pro Slide w/ RMR Cut - Flat Dark Earth Cerakote 416 Stainless - For SIG P320 Bear Creek SIG P320 Compatible Barrel, 9MM, 4.7", Black Nitride, Fits Full Size P320/M17 General Barrel Info: P320 compatible barrels are designed to be readily dropped in with variations in stainless, nitride, fluted, ported, and threaded. The simplicity of P320-compatible barrels makes it hard to not try the next best-looking option for your next build.

DISCLAIMER: This product is not manufactured, authorized, endorsed, or warranted by GLOCK. GLOCK does not warrant or represent that this product is compatible with GLOCK pistols.

JBAPX9TH Beretta APX Threaded Barrel 9mm, BBL 125mm Beretta Threaded Barrel has a threaded muzzle to enable mounting of a compensator or suppressor, it comes complete with thread protector. Details: Caliber: 9 mm 1/2x28 thread pitch Length: 5" (127mm) Internal Finishing: Chromed External Finishing: Steel, matte UPC: 082442886497 These are true drop-in barrels with finished chambers and do not generally require any gunsmithing. In rare cases, the fitment may be required. In that case, please see your local gunsmith for proper installation. Made in Italy or U.S.A.

10.5 inch 10mm Pistol Caliber AR-15 Barrel, 4150 CMV and Nitrided, 1/16 Twist, Medium Contour Barrel Profile - made by Tactical Kinetics. Our Tactical Kinetics AR platform barrels are constructed from the finest domestically sourced steels, are drilled, reamed, and button rifled, and then profiled and chambered to exacting dimensions in compliance with SAAMI Specifications. Our high-precision manufacturing processes ensure both accurate and repeatable performance for thousands of rounds. Weight 1.25 Length 10.5 Profile Medium Twist 1:16 Finish Nitride Material 4150 CMV

DISCLAIMER: This product is not manufactured, authorized, endorsed, or warranted by GLOCK. GLOCK does not warrant or represent that this product is compatible with GLOCK pistols.

DISCLAIMER: This product is not manufactured, authorized, endorsed, or warranted by GLOCK. GLOCK does not warrant or represent that this product is compatible with GLOCK pistols. Polymer80 Marked Glock 19 Compatible Barrel - Spiral Fluted - Gun Metal Gray SPECIFICATIONS: Brand: Polymer80 Model: Glock 19 Compatible Barrel, Spiral Fluted, Gun Metal Gray Model Compatibility: 19 Gen Compatibility: 1, 2, 3 Caliber: 9mm (9x19) Material: 416R Stainless Finish: Gun Metal Gray Fluting: Spiral Chamber Marking: Polymer80

This 5.56 chambered 7.5 inch Pistol Barrel is machined from 4150 Chrome Moly Vanadium steel with a QPQ Corrosion Resistant Finish and QPQ coated M4 feed ramp extension. Quench Polish Quench (QPQ) is a specialized type of nitrocarburizing case hardening that increases corrosion resistance. It is sometimes known by the brand name of Tufftride, Tenifer Black Nitride or Melonite. QPQ is a huge improvement over Chrome Lined barrels. Unlike chrome lining, where the chrome is built up on the surface, QPQ converts the surface without the risk of dimensional build up. Length - 7.5"

This replacement barrel fits all models of the Steyr AUG, and will fit in any prior model from the A1 to the new AUG A3 M1. This barrel comes with a 1:9 twist and has a tulip style flash hider. Choose either a 18" or 20" barrel with 1/2x28 American threads or 13x1 Metric threads with your choice of fore grip. MPN#: 125501066

8.3" Straight Profile Barrel 9mm | 1/2 x 28 This 9mm chambered 8.3 inch Barrel is machined from 4150 Chrome Moly Vanadium steel with a QPQ Corrosion Resistant Finish and QPQ coated barrel extension.Quench Polish Quench (QPQ) is a specialized type of nitrocarburizing case hardening that increases corrosion resistance. It is sometimes known by the brand name of Tufftride, Tenifer Black Nitride or Melonite. QPQ is a huge improvement over Chrome Lined barrels.

This 5.56 chambered 14.5 inch Performance Series Barrel is machined from 4150 Chrome Moly Vanadium steel with a QPQ Corrosion Resistant Finish. Our Performance Series Barrels feature a FailZero Nickel Boron Coated Extended M4 Feed Ramp Extension. Comes with a pinned low pro gas block. Features: - Length - 14.5" - Material - 4150 Chrome Moly Vanadium - Profile - Hanson - Finish - QPQ Corrosion Resistant - Gas System Length - Mid-Length - Gas Block Journal - 1.03" Gas Block Seat for .625" Low Profile Gas Blocks Only - Twist Rate - 1:7 inches - Muzzle - 1/2x28 Threaded

Barrel Material: 4150 Certified Gun Barrel Quality Steel Barrel Type: Button Rifled Barrel Caliber: 300 BLK Barrel Twist: 1:8 Barrel Length: 7.5” Barrel Profile: GUNNER Barrel Gas System: Pistol Inside Finish: QPQ Nitride Outside Finish: QPQ Nitride Muzzle Thread:5/8-24 TPI (Threads Per Inch) Gas Block Diameter: .750" Gas Port Diameter: .104" Gas Block Journal Length: 1.9" Barrel Extension: M4 Weight: 0.87 lbs Magnetic Particle Inspected! 11-degree Target Crown MPN#: 15A38P7NGQ

DISCLAIMER: This product is not manufactured, authorized, endorsed, or warranted by GLOCK. GLOCK does not warrant or represent that this product is compatible with GLOCK pistols.

Description Here at AR15Discounts.com we work with a wide variety of machine shops and barrel manufacturers. When we come across a barrel maker we like, we will often decide to private label those barrels for resale under the NBS brand. We purchase these barrels in large quantities and then pass the savings on to our customers. Why buy an NBS Brand Barrel: - American Made – Sourced from a variety of Tier 1 Manufacturers here in the United States - Quality Control – All barrels are manufactured under ISO-9001 or better quality standards

Product #: 792559 Manufacturer #: GAP365XLTB UPC #: 791154084694

DISCLAIMER: This product is not manufactured, authorized, endorsed, or warranted by GLOCK. GLOCK does not warrant or represent that this product is compatible with GLOCK pistols.

DISCLAIMER: This product is not manufactured, authorized, endorsed, or warranted by GLOCK. GLOCK does not warrant or represent that this product is compatible with GLOCK pistols.

Description Our 5.56 chambered 13.7inch Government Profile Mid-Length Modern Series Barrel is machined from 4150 Chrome Moly Vanadium steel with a QPQ Corrosion Resistant Finish and QPQ coated M4 feed ramp extension. SKU BABL556033M Length 13.7″ Material 4150 Chrome Moly Vanadium Profile Government Finish QPQ Corrosion Resistant Twist Rate 1:7 inches Gas System Length Mid-Length Gas Block Journal .750″ Muzzle 1/2×28 Threaded Weight 25oz Weight 1.687 oz MPN BABL556033M Finish Nitride / Melonite Barrel Profile Government / SOCOM Gas System Length Midlength

ELD Performance 16" 223 Wylde, Mid Gas, Medium Profile, 1:8T 5R, 416R Stainless, Black Nitride, Dual Spiral Flute