Forward Controls Design
Other products
from $53.74
UPC:
697566711145
MPN:
BIS, 43X/48, no tritium
Type:
BIS Back-Up Iron Sight Set
Model Fit:
Glock 43x / 48
from $58.90
UPC:
682318760342
MPN:
ABC/R, 7.62 SER
from $77.90
UPC:
697566711152
MPN:
BIS, 43X/48, with tritium
Fits:
Glock 43X, 48
from $96.90
UPC:
795847525273
MPN:
BIS,43x/48,withfrontandreartrit
Manufacturer:
Forward Controls Design
Gun Make:
Glock
Gun Model:
Glock 48, Glock 43X
User posted deals for Forward Controls Design
(32 deals found)
6 months ago
RHF4 incorporates Forward Controls design input: Omission of built-in QD swivel attachment points. Some like the now common front and rear located QD sockets, we prefer the location of the front sling attachment be left to individual users. A BCM rail mounted QD sling adapter is included (the QD sling adapter can be removed in the drop down menu if you don’t need it, or already have one, please see the QD sling adapter drop down menu). The rail numbers are machine engraved, and a subdued Cygnus is engraved on the right side of the RHF4.
FEATURES:
– Material: 6061 T6
- UPC: 686162347834
- MPN: RHF4-11.5-BLACK
6 months ago
Out of stock
Description
6315KM-L (long) is the Dead Air sound suppressor Keymo mount of our 6315 (1/2×28) flash suppressor designed for 13.9″ barrels, compatible with .223 Dead Air sound suppressors with Keymo interface.
6315KM-L is 2.7″ long, and can bring a 13.9″ barrel to non-NFA length (16.1″, assuming 0.5″ of threading on the barrel).
- UPC: 818500018001
- MPN: 6315KM-L
7 months ago
Expired
The Forward Controls Design LMC Low Profile Duty AR-15 Magazine Catch is engineered to minimize accidental magazine releases. Its unique features include a slightly longer catch for secure engagement, a shorter shaft for a lower profile, and a winterized design for reliable operation in harsh conditions. Billet machined from 4140 steel for strength and durability, the LMC is an ideal upgrade for your AR-15 and proudly made in the U.S.A.
Features:
Compatible with TDP spec M16s and AR15s
Longer catch (0.06”)
Shorter shaft lowers height of mag release button (right side)
- UPC: 686162347919
- MPN: LMC
7 months ago
Expired
The Forward Control Design Parallel Red Dot Mount for ACOGs (PMA) adds clearance for red dot mounts to bring your red dot to eye level. This offset Picatinny mount can be added to an upper receiver, railed handguard or used with catilevered Picatinny rails on the side of your weapon. It runs parallel to the rails on the handguard and upper receiver and has a five slot Picatinny interface to provide room to fit most MRDS Picatinny mounts.
- UPC: 688201997284
- MPN: PMA
7 months ago
The advent of the ambidextrous charging handle, along with other ambidextrous controls, is a boon for AR15/M16 users, but it is not without unintended consequences.
7 months ago
Effective flash suppression, reduced muzzle rise, an integrated wire cutter feature, and a slick, no frills design come together in the 6310. Machined from incredibly durable 4130 bar stock steel, the effective flash hider provides a noticeable improvement on the traditional A2 flash hider in both flash suppression and muzzle rise compensation, without increasing muzzle blast. A slick nitride finish protects it from corrosion to give you a long lasting and durable option for your rifle.
Features:
5/8×24 threaded for .308/7.62
4130 steel bar stock
Properly heat treated
- UPC: 682318760502
- MPN: 6310
7 months ago
HF-601 is a collaboration between Hodge Defense Systems and Forward Controls Design.
HF-601 is based on their PF-040 pins, with Jim’s input on what he wants on HDSI ARs. Like PF-040, they’re 17-4 stainless steel, precision billet machined on Swiss machines with high degrees of precision and very tight tolerances, and black nitride treated. HF-601 pins are 0.040″ longer than TDP take down and pivot pins, another feature shared with their PF-040.
- UPC: 697566711077
- MPN: HF-601
7 months ago
Expired
Bigger is not always better, and Forward Controls Design demonstrates that perfectly with their Enhanced Magazine Release. Cut from heavy duty 4140 chrome moly steel bar stock, the EMR is a scant 0.02″ taller than factory release buttons but offers an impressive improvement. The minimalistic, yet ergonomic design is an excellent update for any build!
Features:
Curved and dimpled or serrated front face
0.02″ taller than MIL-SPEC options
MIL-SPEC through-hole for standard magazine catches
Minimal protrusion over the fence on most forged receivers
7 months ago
Expired
The end plate is one of the most over looked parts when it comes to upgrading your rifle. After all, that simple hunk of forged metal does a perfectly good job of holding your takedown pin detent and spring in place and providing material to stake your castle nut. Forward Controls Design wasn’t content to leave well enough alone, however and offers the End Plate, Sling Adapter, Forward Controls Design now available in heavy duty 4140 chrome moly steel.
Features:
4140 chrome moly steel construction
Rotation Limited side QD sling swivel sockets
7 months ago
Expired
Based on the successful 6310 design that’s been well proven on many of our Dead Air Keymo and Xeno devices, 6310 is a closed bottom flash suppressor / muzzle rise compensator that provides 15 to 20% better compensator performance, without the extra muzzle flash, concussion and noise normally associated with a compensator. 6310’s shorter and smaller 3 o’clock and 9 o’clock ports force more gas to be vented through the 3 upward facing ports.
- UPC: 682157948635
- MPN: 6310RF
7 months ago
ABC/R has finally made its way to 7.62mm, LR308 pattern ARs. ABC/R v2 (for either 5.56mm and 7.62mm ARs) has incorporated refinements and lessons learned since the ABC/R (v1, 5.56mm) was introduced in early 2015, it is now stronger, slimmer and has a much more durable coating (black nitride).
ABC/R version 2 consists of the following changes:
Deletion of lightening cuts
10% thinner, and tapered upper paddle to better clear wide billet upper receivers (tapered upper paddle design input from Military Morons)
Bolt catch plunger and spring now included
- UPC: 682318760342
7 months ago
Expired
Ambidextrous charging handles for the AR platform have exploded in popularity and with good reason. Regardless of your dominant hand, being able to handily manipulate your rifle’s action in any position is an incredibly useful feature. They aren’t without their downsides however. Extended latches can catch on gear and dig into your chest when your rifle is slung. Small latches are harder to use with optics, and when using the right side of the handle makes mashing your knuckles into your forward assist almost a guarantee. Enter the Low Drag Forward Assist from Forward Controls Design.
- UPC: 682318760366
- MPN: LDFA-AA
7 months ago
Effective flash suppression, reduced muzzle rise, an integrated wire cutter feature, and a slick, no frills design come together in the 6310. Machined from incredibly durable 4130 bar stock steel, the effective flash hider provides a noticeable improvement on the traditional A2 flash hider in both flash suppression and muzzle rise compensation, without increasing muzzle blast. A slick nitride finish protects it from corrosion to give you a long lasting and durable option for your rifle.
Features:
5/8×24 threaded for .308/7.62
4130 steel bar stock
Properly heat treated
- UPC: 682318760502
- MPN: 6310
7 months ago
Effective flash suppression, reduced muzzle rise, an integrated wire cutter feature, and a slick, no frills design come together in the 6315. Machined from incredibly durable 4130 bar stock steel, the effective flash hider provides a noticeable improvement on the traditional A2 flash hider in both flash suppression and muzzle rise compensation, without increasing muzzle blast. A slick nitride finish protects it from corrosion to give you a long lasting and durable option for your rifle.
Features:
1/2×28 threaded for 5.56/.223
4130 steel bar stock
Properly heat treated
- UPC: 682318760496
- MPN: 6315
7 months ago
The buffer retainer is one of those components that absolutely no one thinks about once it’s installed. The little nub might help you time a buffer tube, but mostly it just keeps your buffer and buffer spring seated in your buffer tube when you open your receivers. This humble component can cause big problems should it break, sending the small nub that once retained your buffer to wreak havoc in your trigger group. To prevent this, Forward Controls Design offers the Reinforced Buffer Retainer.
Features:
17-4 PH stainless steel bar stock
Heat treated to H900 hardness
- UPC: 680665827220
- MPN: RBF
7 months ago
,
by Dealer
Out of stock
.jpg)
ABC/R (Augmented Bolt Catch/Release) with its angled and larger top paddle and lower paddle with increased surface area, is purpose designed for use with AR15/M16 receivers equipped with ambidextrous magazine releases. Specifically, it is designed to address the difficulty with accessing the factory bolt catch’s lower paddle with an ambidextrous magazine catch, such as Norgon’s Ambi-Catch, on the receiver.
- MPN: ABC/R V3 AA
9 months ago
Expired
The Forward Controls Design MCF (MLOK Cover, Forward Controls) is a collaboration with Railscales, engineered for maximum grip and versatility. Machined from durable G10 material, this rail cover features the AA (All Angles) dimpled surface pattern for enhanced traction from any grip angle. With its functional design, including large perforations for drainage, the MCF ensures a secure and comfortable hold on your handguard.
SKU: 5554
UPC: 796520449947
MPN: MCF-A, Short
- UPC: 796520449947
11 months ago
.png)
For a limited time, save 20% on LMT Defense + take an extra 15% OFF Forward Controls Design gear. At checkout, apply discount with coupon code "JULY4".
https://bossfirearms.com/4th-of-july-sale/
11 months ago
Out of stock
Weight: 11.504 oz
Style: Dimpled, Serrated
Bolt Material: Carpenter 158 Steel
Finish: NP3
Cartridge Compatibility: .223/5.56 NATO/.300 BLK
Carrier Profile: M16
High Pressure Tested: Individually HP Tested
Magnetic Particle Inspected: Yes
Platform: AR-15
Bolt Finish: NP3
SKU: forward-controls-design-np3-m16-bcg
- MPN: SBCG-DIMPLED
