Vltor

Description

The Vltor Modular Upper Receiver (MUR) is a unique AR-15 Flat-Top upper receiver that undergoes a rigorous quality control procedure during manufacture to ensure a precise, strong and consistent product that will serve the shooter for a lifetime. Vltor CNC-Machines the 7075 Aluminum Forging only after it has been fully stress relieved, and then heat and cryogenically treated. Each upper is finished by hand and all critical dimensions inspected, and finally given a protective Type III, Class 2 Hard Anodized Finish. Weight 0.0000 oz Feed Ramps M4 Finished Anodized Black Forward Assist

Description The Vltor A5 Spring and Buffer Kit includes the improved buffer and buffer spring components used in the Vltor A5 Recoil System and A5 Buttstock Assemblies designed to enhance the functioning of the AR-15 carbine platform. The kit includes a Rifle Length Buffer Spring, Standard Weight A5 Buffer (5.3 oz), Lower Receiver End Plate and Receiver Extension Tube Lock Ring.

The VLTOR A5 buffer system is one of the most tried-and-true buffer systems available in the AR-15 world today. The A5 buffer was specifically designed at the request of the Marine Corps to bring an adjustable stock to their 20” M16 rifles. VLTOR brought them a completely new buffer system that used a rifle-length spring in an adjustable receiver extension tube. This translates to a smoother, slower bolt movement that reduces felt recoil and allows shooters to keep on target. Features: - VLTOR patented design - Body of the buffer is 7075 T6 aluminum

Description This Vltor SASE-2 Enhanced AR-15 Receiver End Plate Sling Mount is a Drop-In, Ambidextrous rifle upgrade that simply replaces the standard factory component. This Enhanced version of Vltor’s original Single Attachment Sling Endplate (SASE) features a Larger HK-Style Loop for compatibility with a greater range of modern tactical slings that utilize larger than standard size HK-style Hooks to attach to the firearm. Includes an indexing washer and screw that interfaces with the rear of the receiver to ensure the end plate is level. Weight 0.0000 oz MPN SASE-2E SKU: 5666

Description Your charging handle may not seem important until you you need to run your rifle in a hurry. The VLTOR charging handle combines a host of upgrades over the original AR-15 / M4 charging handle. From a redesigned pivot that transfers force into the body instead of a small roll pin, to a beefed up 7075-T6 aluminum body, this durable charging handle will outlast the competition. Add in a medium length latch optimized for fast manipulation and you’ll never be satisfied with OEM charging handles again. Features: - Mod 5 small latch - High strength 7075-T6 aluminum

Description

Your charging handle may not seem important until you you need to run your rifle in a hurry. The VLTOR charging handle combines a host of upgrades over the original AR-15 / M4 charging handle. From a redesigned pivot that transfers force into the body instead of a small roll pin, to a beefed up 7075-T6 aluminum body, this durable charging handle will outlast the competition. Add in a medium length latch optimized for fast manipulation and you'll never be satisfied with OEM charging handles again. Features: - Mod 4 medium latch - High strength 7075-T6 aluminum

Description The VLTOR A5 buffer system is one of the most tried-and-true buffer systems available in the AR-15 world today. The A5 buffer was specifically designed at the request of the Marine Corps to bring an adjustable stock to their 20” M16 rifles. VLTOR brought them a completely new buffer system that used a rifle-length spring in an adjustable receiver extension tube. This translates to a smoother, slower bolt movement that reduces felt recoil and allows shooters to keep on target. Features: - VLTOR patented design - Body of the buffer is 7075 T6 aluminum

Product #: 562791 Manufacturer #: VCH-SF-44

Description

After a years-long stint in legal and logistical purgatory, the best-selling charging handle of the past decade has made its return. Previously licensed and distributed by BCM as the original GUNFIGHTER Charging Handle, VLTORs patented design is back on the market. Its the same exact charging handle design youve known and loved since 2009, simply re-released under strictly our own moniker.

Description The VLTOR A5 buffer system is one of the most tried-and-true buffer systems available in the AR-15 world today. The A5 buffer was specifically designed at the request of the Marine Corps to bring an adjustable stock to their 20” M16 rifles. VLTOR brought them a completely new buffer system that used a rifle-length spring in an adjustable receiver extension tube. This translates to a smoother, slower bolt movement that reduces felt recoil and allows shooters to keep on target.

Description The Vltor Pistol Caliber Carbine Modular Upper Receiver (MUR) is a unique AR-15 Flat-Top upper receiver that undergoes a rigorous quality control procedure during manufacture to ensure a precise, strong and consistent product that will serve the shooter for a lifetime. Vltor CNC-Machines the 7075 Aluminum Forging only after it has been fully stress relieved, and then heat- and cryogenically treated. Each upper is finished by hand and all critical dimensions inspected, and finally given a protective Type III, Class 2 Hard Anodized Finish.

The Enhanced Modstock (EMOD) is about one inch longer than the original Modstock and with the rubber butt plate installed, is about a quarter of an inch longer than the CRANE SCB. The increased length of the EMOD is a major benefit when used on scoped rifles (SPR/DMR), as it increases the available comb for any given length of pull. The buttplate of the EMOD is slightly wider and longer at the toe than the regular M4 stock with a noticeable negative pitch, making transitions from the ready feel much more natural.

Description Built to the tightest tolerances, the VLTOR low profile, clamp on and set screw gas blocks are small enough to fit inside most rail systems. These gas blocks were designed to be used when a rail system/handguard that is mounted over the entire gas system. - Made from 17-4 PH Stainless Steel - Comes in Matte Black Oxide  or Matte Gray Silver (both anti-reflection/anti-glare) - Two bore diameters available: 0.750”, 0.625” Weight: 0.0000 oz Gas Block Diameter: .625, .750 Style: Clamp On, Set Screw Finish: Black, Stainless

Description The RE-10/A5SR Receiver Extension is a six position receiver extension designed to work with the VLTOR A5 system. This receiver extension is designed to work with Mil-Spec dimensioned M4/AR-15 type collapsible stocks. It also can be utilized as a replacement receiver extension for the AR-10 rifle. Weight 0.0000 oz MPN RE-10/A5SR SKU: 5637

Description The VLTOR A5 pistol length recoil system allows you to convert your AR pistol to the patented VLTOR A5 system! The A5 system is considered to be the most innovated upgrade for the AR platform, increasing the reliability and performance of any weapon. It is proven in reducing the cyclic rate of M4 carbines, lowering the bolt carrier velocity and eliminating the felt recoil. The system includes a pistol length buffer tube, mil-spec rifle spring, A5H2 5.3 oz buffer, VLTOR lock plate and lock nut. Length of tube from end of knurling is 6.45″.   Features

The VLTOR IMOD (Improved Modstock) is a very popular buttstock for owners who want extreme durability and reliability for their carbine. The IMOD has a "solid" feel with a comfortable, wide design that provides significant area for a comfortable cheek weld.  It features dual accessory compartments for spare batteries or parts, a removable buttpad and an angled toe at the bottom of the butt. Buttstock includes IMOD stock and accessory compartment. Notes: 

This Vltor Standard H2 A5 Recoil System Buffer is a high quality replacement component for an AR-15 rifle that's equipped with the Vltor A5 Recoil System. The H2 Buffer is the standard weight unit supplied with all A5 Recoil System Retrofit Kits as well as the A5 EMOD Stock Assembly. H2 buffer weight is 5.3 oz. Notes: