Barrel: A proprietary blend of Hammer forged chrome molly vanadium made by FN that is referred to as "Machine Gun Steel" by virtue of its required use in FN's M249 and M240 weapons. The hammer forging process work hardens the steel, making it more durable. In addition, the chrome process for the bore allows for a lining almost twice as thick as a standard M16 for enhanced durability. Chambered in 5.56 NATO, with a 1/7 twist, M4 barrel extension, and a rifle-length gas system. The barrel has a conventional .750" gas block diameter, is Mil-spec phosphate coated, High Pressure tested and Magnetic Particle inspected. Barrels are finished off with a taper pinned, f-marked, front sight post, standard handguards, and an A2 flash hider. Barrel is made for PSA by FN right here in South Carolina.
Upper: Forged 7075-T6 A3 AR upper is made to MIL-SPECS and hard coat anodized black for durability. Featuring machined T marks, and a mil-spec finish. These uppers are made for us right here in the USA by a mil-spec manufacturer.
Bolt: Bolt is made of Mil-spec shot-peened Carpenter 158 steel. Gas key is secured with grade 8 fasteners and staked per mil-spec. Bolt carrier is parkerized outside, and chrome lined inside.
Each upper is assembled to order with care, and test fired. Included is a PSA A2 Rifle Lower Build Kit.
Barrel length 20"
5.56 Nato Chamber
Chrome-lined bore and chamber
High pressure tested and MP inspected barrel
1 in 7" twist
.750" gas block diameter
M16 Bolt Carrier Group
Carpenter 158 Bolt
PSA A2 Rifle Lower Build Kit