Description

Description
Specs
The same great stripped lower, with a little bit lower price due to some cosmetic or trim issues.
What makes this stripped lower different? The answer is simple… the KE Arms KP-15 stripped lower receiver is a monolithic polymer AR-15 style lower receiver made from injection molded, 30% glass-filled nylon. Its unique design incorporates the buffer tube, pistol grip, trigger and a 13-inch (LOP) buttstock into the receiver as integral components. The result is an affordably priced, lightweight lower receiver.
The KE Arms KP-15 stripped lower receiver uses a carbine buffer and spring. The take down and pivot pins have built-in detents, which increases durability by eliminating the spring and detent holes. The buffer detent (should you choose to use it) is held in place with a 5/64” roll pin. The hammer pin area is wider for durability; standard AR-15 hammer pins can still be used, though the KE Arms longer hammer pin is recommended for customers preferring a flush pin for aesthetic reasons.
The safety selector spring and detent have been designed to load from the top, then the selector is slid over them. (Standard selectors can work but removing them can be particularly difficult. KE Arms recommends the use of their designated mil-spec selector or ambi selector to make removal easier. Follow the manufacturer’s assembly guide for further instructions.)
- Compatible with all Mil-Spec fire control groups
- Compatible with cassette style match triggers
- Flared magwell
- Available in black and flat dark earth
- MLOK Slots at rear of stock for sling attachment
- Pre-drilled in front for QD socket inserts
Uses a standard bolt catch. Cannot accept the PDQ lever. The PDQ lever is exclusive to the WWSD complete rifle.
Do NOT use anything other than standard carbine buffers and round springs or the JP SCSS in the KP-15.
WARNING!: This item is legally classified as a receiver. You Must be 21 years old to purchase this item and a resident of the same state your transferring dealer is licensed in.
Stripped Lowers Include
- Pivot and Take Down Pins
- KP-15 Selector Detent
- Buttplate
- 5/64"" Roll Pin to Retain Buffer Detent
The KE Arms KP-15 is compatible with standard AR-15 uppers in calibers including .223/5.56mm NATO, .300 Blackout, 6.5mm Grendel and 6.8mm SPC. The lower receiver is also compatible with 9mm blowback systems, when used with a minimum buffer weight of 5.4oz (carbine). Failure to use a minimum buffer weight of 5.4oz can damage the lower.
CERAKOTE: If you intend to Cerakote your KP-15 the manufacturer recommends the bake should be done at low temperatures (<190 Degrees F) and with an upper in place to prevent warping.
WARRANTY: The KE Arms KP-15 has a lifetime warranty for normal use. If the receiver breaks through misuse or neglect, KE Arms will replace it ONCE for $65.00.
NOTE: Not recommended for .458 SOCOM, .50 Beowulf or .50 BMG. Please contact KE Arms if you intend to register your KP-15 lower receiver as an NFA weapon.
SKU#: 16101107
100-042-613WB

Explore more KE Arms Lowers gun parts.

Coupons for Brownells store

MARCH20
Expiration date 2024-Mar-31 Report
MARCH50
Expiration date 2024-Mar-31 Report
MARCH120
Expiration date 2024-Mar-31 Report
BULLET15
Expiration date Unknown Report
CNGEARS
Expiration date Unknown Report
OPTICS15
Expiration date Unknown Report
GLOCKTOPUS
Expiration date Unknown Report
TTB10
Expiration date Unknown Report
BADASSERY
Expiration date Unknown Report
TRIGGERED
Expiration date Unknown Report
GIFT10
Expiration date Unknown Report
SMSAVE
Expiration date Unknown Report
WLS10
Expiration date Unknown Report
TA10
Expiration date Unknown Report

Live Inventory Search

Want to see your products here? Click this link.

Compare prices for 16101107 - KE ARMS Blemished KP-15 Lower Receiver Stripped FDE from all vendors

Store Price Shipping rate Report Show more
Out Of Stock
$99.99
$10.00

Comments (6)

Login or register to post comments

I have a couple of these Nylon 6 lower units and they are good to go. Great with body armor becuase of the shorter A1 style stock. I use a Colt Carbine buffer in one. Pair it up with a 10.5 upper and get a SBR stamp. 300 blackout with sliencer.

0 votes
0 votes

I am just not sure about a polymer, one piece lower and buttstock combination... seems like there would be some fairly weak spots. I cannot say for sure as I do not own one or even seen it in person. I just am not a big fan of polymer lowers and or uppers especially, on Higher powered rifles any larger than a rimfire .22 or a .17hmr. It makes me even more leary when according to the manufacturer, you must use proprietary pins, detents and springs. Also they plainly state that if one chooses to cerakote this lower then it must be baked at lower temps, with an upper in place to keep it from warping. We all know sustained fire creates heat too and Id be concerned about warpage over time. So yeah this is a no go for me.... this is my opinion and I will respect yours.

1 vote
1 vote

SCAR 17… The lower is good to go, check out the video on the lower. “Sustained fire” is not going to create enough heat on the lower receiver to warp it lol the heat is going to be on the barrel. The explosion happens in the chamber not in the receiver.tthelowerriver

0 votes
0 votes

It's an ugly plastic baby. I'm with you.

1 vote
0 votes

Gun Jesus on Forgotten Weapons did a great video on the history of these.

1 vote
0 votes

Honestly not a great deal when you can get the Black or Flat Earth for the same price with the $10 coupon.

3 votes
0 votes
Login or register to post comments