Description
How do I mount the stock to my rifle?Please read the instructions below, if you are unsure, or not capable to do the installation, please get help from your GRS dealer.This installation is described for a standard bolt action rifle. (Tikka T3, Sako 85/75, Remington 700, Howa 1500)Make sure the rifle is unloaded, remove the bolt from the rifle.Loosen and remove the action screw behind the trigger guard and the front action screw.Remove the bottom metal.Take the barreled action out of the original stock.Place the barreled action in the GRS stock, on the Tikka and Sako models, make sure the bedding block find its place in the slot underneath the action. If it does not you will see the action and barrel is not parallel to the stock and barrel channel.Put the bottom metal in the GRS stock, make sure the magazine well (Remington, Howa models) is correctly placed in the bottom metal.Insert the front and rear action screw and tighten loosely.Tighten the front screw to 3.5 NM (31 inch pounds)Tighten the rear screw to 3.5 NM (31 inch pounds)Inspect the action and barrel in the stock, does it look parallel? Does the hinged bottom metal work as it should? If you find any irregularities check if the magazine well is correctly placed in the bottom metal.Put the bolt in the rifle, make sure the rifle is not loaded. Cycle the bolt, dry fire.Check if the safety operates as it should.Ever since GRS began creating laminate stocks in 2012, shooters have been asking for a similar-featured stock in a synthetic - and the GRS Berserk is the answer to that request.Constructed of 15% fiberglass-reinforced Durethan and enhanced with rubber grip surfaces under the fore end and on the grip for better friction in wet conditions, the Berserk features adjustable length of pull and cheekpiece, for the ultimate all-condition rifle stock.GRS Berserk FeaturesGRS SpeedLock system Pillar bedding included, made from 65% glass Flush cup sling mounts, push-button sling loops includedOne extra sling mount on fore end for bipod mountingLength of pull adjustable 30mmCheekpiece adjustable 30mm Grip and forend is 5% slimmer than Sporter/VarmintLOP 33.5-36.5cmGRS Product OverviewInterested in comparing this with other stocks, or searching for other GRS products? Click here to download the GRS Product Overview.GRS Savage 12 SA Stocks Will Fit:Savage 10 FCP-SR ( AICS Magazine)Savage 10 FCP HS PrecisionSavage 10 FCP McMillanSavage 12 Varmint Low ProfileGRS Savage 16 SA Stocks Will Fit:Savage 10 International Trophy Hunter XPSavage 10 Trophy Hunter XPSavage 11 International Trophy Hunter XPSavage 11 International Trophy Hunter XP- compactSavage 11 Trophy Hunter XPSavage 11 Trophy Hunter XP- compactSavage 11 FCNSSavage 11 ScoutSavage 11 Lady HunterSavage 11 Lightweight HunterSavage 14 American ClassicSavage 16 International Trophy Hunter XPSavage 16 Lightweight HunterSavage 16 Trophy Hunter XPSavage 16 FCSS
MPN#: 104429
