This deal is out of stock.
Description
Three-Piece Polymer Angled Foregrip
Three-piece design
Includes an interchangeable finger shelf (allows for a flat surface or finger nub)
All mounting hardware included
Material: Polymer
Weight: 2.53 oz.
Length: 5.5 in.
Height: 1.94 in.
Width, maximum: 1.25 in.
Back-Up Front and Rear Sights
Features
Impact resistant polymer construction
Spring-loaded flip up sight easily activated from either side or by pressing the top
Detent and spring pressure keeps sight erect but allows for unobstructed folding under impact, etc.
Protective wings shield the spring-locking A2 front sight post
Specifications
Weight, w/ hardware: 1.2 oz.
Height above rail, stowed: ~0.51 in.
Length, stowed: 2.6 in.
Length, deployed: 1.5 in.
SKU#: RS-MP+HG-MP
Coupons for OutdoorSports-USA store
EXTRA15
Expiration date
Unknown
Report
I purchased one of those grips on e-Bay for approx. $5, probably less. It is NOT an impact resistant polymer. Think of a very cheap and flimsy plastic that will shatter if it gets too cold and is impacted. It also did not fit a standard picatinny rail (tried on 4 different rifles from different manufacturers) without having to run a file through it and widen in. You will have to file down "ribs" in there that also appear to increase structural integrity, but you ruin that by removing them so it actually fits on your rail.
I also got a set of sights that look the same off e-Bay for about $5 as well. The nuts and bolts that they came with were aluminum, so in trying to tighten them down on my rail I stripped both the nut and bolt accidentally. They seem to be odd sizes as well, this took place nearly 2 years ago and I kept the sights, but I haven't found a nut/bolt combo that fit the darn things.
Overall you can buy this set on e-Bay for around $10 with free shipping, maybe even getting it for $8 or less. It comes straight out of China, this is just someone reselling Chinese junk at a mark-up.