Rock Island Revolver M200 Single/Double 38 Special 4" 6 Black Polymer Black Parkerized - $199.85

Ordered from vendor on Wednesday, shipped from Louisiana on Friday, received at my FFL on Monday via FEDEX. Not bad.
As for the pistol, was at first apprehensive about it due to never know what quality you get at these prices. Assembly and fit seems solid. finish is ok. Some machine marks here and there and streak of runny parkerising. Cylinder has just a little play. The hammer did have issue at first. It would catch on something internal (likely a burr or rough edge) at the second click just before final lock back and stop. You could not get it to lock then and have to ease the hammer back down. After many cycles of pulling the hammer and double action triggerpull, it seems to have worn down enough to lock reliably now.
I find the grip needs to be redesigned. The left side top edge interferes with shell ejection. With the cylinder swung out, the rim of a 3 O'clock shell would catch on the grip edge when you push the ejector rod. You have to pull that case out of the cylinder at a slight angle to clear the grip. This would be a problem during reloads. I may get a different grip as another poster mentioned if I keep it longer term.
After one range trip so far, the gun is very accurate. Holes appear where you aim it at ten yards. Recoil is manageable, helped by the forward bias weight.
For the price, I feel I got exactly what I intended this for.

Can't go wrong with this for a truck gun or camp gun. Not sure I'd want it as my daily carry but for the price it's a deal. Longevity would be my main concern.

I have had one for about a year and enjoy shooting it. I replaced the original cheap plastic grip with Pachmayr 02513 Gripper Grips, Colt D Frame Post 71 and I've had zero issues with the pistol. It's obviously a clone of a Colt D frame.

I’ll give you $100 for it

I'm still tempted to buy one of these. Reviews are generally pretty good.