Veriforce Tactical Coupon Codes, Discounts and Deals
(33 deals total)
Filter Veriforce Tactical Coupon Codes, Discounts and Deals
18 months ago
,
by Dealer
Made Of Steel
Black Color Is A Phosphate Finish
Spring, Rod, And C Clamp Included
Red Is Cerakote Finish That Looks Anodized
Fits All AR15 Mil-Spec Uppers
USA Made
- UPC: 617201300435
- MPN: 556-DUST-BLACK
18 months ago
,
by Dealer
US Made In Scottsdale, Arizona
Nitride Finish
Reduces Felt Concussion In Close Quarters
Length: 2.5″
Muzzle Brake & Blast Shield Are Steel
1/2 x 28 Thread for 5.56/.223 also works with 9mm
Great For Use On AR-15 Pistols and Rifles
O.D.: 1.5″
QD Blast Shield Threads Down Over Muzzle Comp
5/8×24 Threads for 300 Blackout and .308/7.62 and Under Caliber Bullets
Total Weight: 9.7 oz Combined
- UPC: 617201301951
- MPN: MCBS-223-BLK
19 months ago
,
by Dealer
AR-15 Skeletonized Aluminum Featureless Grip in Black (NY/CA Compliant) Veriforce Tactical - $109.95
$109.95
Designed To Conform To DOJ Criteria
Skeletonized Cut Out Design
Grip Screw And Washer Included
Total Weight: 6.4 oz
Ergonomic Design
Machined From 6061 Billet Aluminum
Anodized Black Finish
Please Consult Local Laws & Regulations To Ensure Compliance
- UPC:
- MPN: CA-NY-GRIP-BLK
19 months ago
,
by Dealer
US Made
M-LOK System
Tight Fit Up Against Receiver, Allowing For A Monolithic Top Rail
7″ Carbine Length
T6 Aluminum Body
Gold Plated Finish
Internal Diameter: 1.34″
Ultra Lightweight
Proprietary Barrel Nut Included
Heavy Duty
Total Weight Including Barrel Nut Is 6.5 oz
Rail System Slides Over Barrel Nut And Is Locked Up Against Receiver With 6 Screws
- UPC:
- MPN: VT-7MLK-GLD-P
19 months ago
,
by Dealer
Made of German Stainless Steel (not flimsy like standard stainless steel at such a small thickness)
A MUST have for any 1st time or experienced builder
.07mm Thick
Slides over your barrel and then your put your barrel nut over it
Helps timing your barrel nut, so the proper torque specs are correct while lining up your gas tube hole
Works with all AR15 barrels (does not work with .308 barrels)
- UPC: 617201299845
- MPN: SHIM-5
20 months ago
,
by Dealer
Machined From 6061 Billet Aluminum
Grip Screw And Washer Included
Designed To Conform To DOJ Criteria
Total Weight: 6.4 oz
Please Consult Local Laws & Regulations To Ensure Compliance
Ergonomic Design
Anodized Gold Finish
Skeletonized Cut Out Design
- UPC:
- MPN: CA-NY-GRIP-GOLD
20 months ago
,
by Dealer
Our billet upper is made locally in Phoenix, in our facility. We start off from a solid block of 6061 aluminum and CNC it down to spec. A billet is much harder and more consistent than forged. Forged has a tendency to crack and loosen through wear and tear over time, while billet will last 5x longer than a forged upper. We now include all of our uppers with super durable billet. We Type 3 hard coat anodize our aluminum to make it almost as hard as steel.
- UPC: 617201302798
- MPN: UP-BIL-16SSM-15MLKE-CENTSS
20 months ago
,
by Dealer
Rainbow PVD Coated Finish
Mag Catch Lever
Enhanced Trigger Guard
M-LOK Micro Angle Grip
Extended Mag Catch Release
Extreme Duty Wide Castle Nut For Carbine/M4 Buffer Tube
Extended Take Down Pin Set
Forward Assist Assembly
5.56 Charging Handle
Anti-Rotation Pin Set
Extended Bolt Catch Release
Multi Degree Short Throw Ambidextrous Safety
Gen 3 Gate
- UPC:
- MPN: AR-FINISHING-KIT-RPVD
21 months ago
,
by Dealer
Handguard
US Made
Proprietary Barrel Nut Included
M-LOK System Slides Over Barrel Nut And Is Locked Up Against Receiver With 6 Screws
Internal Diameter: 1.34
T6 Aluminum Body
Total Weight Including Barrel Nut Is 10.8 Oz
Tight Fit Up Against Receiver, Allowing For A Monolithic Top Rail
15″ Extended Length
Ultra Light Weight
M-LOK System
Heavy Duty
Gold Plated Finish
Stock
High Density Polymer
Just Released
Weight Of Stock Shell: 5.4 Oz
Total Weight Of Stock Kit: 15.2 Oz
Micro Stock Design With Short Buttplate
Light Weight
- UPC:
- MPN: VT-ULT-RIFLE-GLD-P
21 months ago
,
by Dealer
T6 Aluminum
1/2 X 28 Or 5/8×24 Threads
Slips Over Barrel And Threads On
1.25″ Outside Diameter
Holes Go All The Way Around
Anodized Black or Anodized Red Finish
1/2×28 For 5.56, .223 Calibers, Etc..
Functions As A Barrel Shroud And Muzzle Compensator
Covers About 3.25″ Of The Barrel
Us Made In House
5/8×24 For .308, 300 Blackout, 6.5 Grendel Etc..
Generation 2
5.5″ Total Length
- UPC: 617201303139
- MPN: 1326-MB-P
21 months ago
,
by Dealer
T6 Aluminum
5/8 x 24 Thread
Multi Porting “Gatling Gun” Style Muzzle Comp Reduces Felt Recoil Up To 70 Percent
Covers 4″ of Barrel, Extends Barrel 1.5″
OD: 1.1875″
US Made
Length: 5.5″
.308/ 300 AAC Blackout Cal
Slips over Barrel And Threads On
Dual Purpose Unit, Functions As A Barrel Shroud And A Muzzle Compensator!
Anodized Bronze Finish
Weight: 6 Oz
- UPC:
- MPN: 1326-MBP-308-BRNZE
22 months ago
,
by Dealer
Complete Pistol Buffer Tube Kit
Matte Rainbow PVD Coated Finish
US Made
Castle Nut
T6 Aluminum
3 oz Carbine Buffer & Spring
Ambidextrous One Point Sling End Plate
Foam Tube Cover Also Included
- UPC:
- MPN: PISTUBESET-MATTE-RPVD
22 months ago
,
by Dealer
Complete Blue Rifle Build Kits Includes:
Complete Stock with Anodized Blue Tube
Anodized Blue Skeletonized Pistol Grip
15″ M-Lok Handguard in Anodized Blue
Anodized Blue Charging Handle with Gen 5 Latch
Anodized Blue Dust Cover in Billet
Multi Ported Custom Muzzle Device
Build Kit Details:
5.56 Caliber
16″ Chrome Moly Vanadium Nitride Barrel
Forged 7075 Anodized Upper
Nitride BCG
Full Lower Parts Kit USA made
- UPC:
- MPN: AR-FULL-BUILD-BLUE
22 months ago
,
by Dealer
Complete Pistol Buffer Tube Kit
Matte Rainbow PVD Coated Finish
US Made
Castle Nut
T6 Aluminum
3 oz Carbine Buffer & Spring
Ambidextrous One Point Sling End Plate
Foam Tube Cover Also Included
- UPC:
- MPN: PISTUBESET-MATTE-RPVD
23 months ago
,
by Dealer
US Made
Replaces Trigger/Hammer Pins
Anti-Rotation Locking Cam Pins
Allen Key Included
Cerakote Flat Dark Earth Finish
- UPC: 714569653248
- MPN: GT-ARP-FDE
23 months ago
,
by Dealer
Aero Precision 70/75 Forged Upper Receiver
Comes with 10 Inch M-LOK ONLY (pictured with KeyMod)
Made In Scottsdale, Arizona
16 Inch Nitride Barrel 1/7 Twist
6 Inch Socom Style Barrel Shroud Sits Flush With Hand Guard
BCG & Charging Handle Not Included ($130 Extra)
Black Nitride Gas Tube
Part Of The Custom Shop Series
- UPC: 617201301081
- MPN: UP-NGTHWK16
23 months ago
,
by Dealer
Our 5.56 16” stainless steel is made from 416r stainless steel. Our barrels are have a 12 step process that helps set us apart from the competition. Most of our competitors only use 8 processes or use inferior stainless steel. The 416r is perfect for handling accuracy and durability, but don’t beat it up, stainless steel is not a load and dump lots of ammo kind of barrel. Stainless steel will last 50,000 rounds, but you cannot let the barrel get too hot. It also can get better grouping over time, unlike our nitride barrels that stay the same groupings for about 15,000 rounds average lifespan.
- UPC: 617201306819
- MPN: UP-556-AA-DIAMOND
23 months ago
,
by Dealer
We spare no detail in production! Our skeleton grip is a 6061 billet block that we mill down to size and it has a bead blasted purple anodized finish that looks amazing and feels great. There is no better deal for aluminum grips than our AR-15 skeleton grips.
We mill out a solid bar block for our mil-spec buffer tube, we do not cut corners by buying hollow bar stock and capping the end like most manufactures do. This creates a sturdier and safer fixed length stock tube that you can trust.
- UPC: 617201305225
- MPN: UP-SET-PURPLE-12MLK-1326MB
24 months ago
,
by Dealer
Basics
AR-15 5.56 Rifle Upper Set “Trump MAGA” Limited Edition In Red, Gold, Black, Or Blue
Limited Lifetime Warranty
ALL YOU NEED IS A LOWER, LOWER PARTS KIT AND BCG PLUS CHARGING HANDLE TO COMPLETE THE RIFLE
Headspace Verified
Built By Veriforce Tactical
Upper Receiver
M4 Feed Ramps
T6 Forged
USA Made
1913 Picatinny Rail Flat Top
Matches To Any Lower
Handguard
US Made
Anodized Red, Gold, Black, Or Blue
Rail System Slides Over Barrel Nut And Is Locked Up Against Receiver With 6 Screws
Heavy Duty
T6 Aluminum Body
- UPC: 617201302309
- MPN: TRUMP-UPPER-SET
24 months ago
,
by Dealer
45/90 Degree options
US Made
Anodized Blue Finish
Ambidextrous
5.56 Cal/.308 Cal
Multiple Degree Variations
Allen Wrench Included
Notches On Both Sides
Short Throw Levers With Paddle
Each Side To A Different Degree If Desired
Lightweight
- UPC:
- MPN: AMBI-SAFE2-BLUE
24 months ago
,
by Dealer
Our Billet Upper Is Made Locally In Phoenix, In Our Facility. We Start Off From A Solid Block Of 6061 Aluminum And CNC It Down To Spec. Billet Is Much Harder And More Consistent Than Forged. Forged Has A Tendency To Crack And Loosen Through Wear And Tear Over Time, While Billet Will Last 5x Longer Than A Forged Upper. We Now Include All Of Our Uppers With Super Durable Billet. We Type 3 Hard Coat Anodized Our Aluminum To Make It Almost Has Hard As Steel.
- UPC: 617201301968
- MPN: UP-STINGER-FDE
25 months ago
,
by Dealer
Assembled By Veriforce Tactical
A2 Style Flash Hider
Does NOT Come With Bolt Carrier Group And Charging Handle
7.5″ Stainless Steel 1:7 Pistol Barrel
Carbine Length Quad Rail
Pistol Length Gas System
USA Made Forged Upper Receiver
Mil-Spec Picattiny Rails By Guntec USA (No Longer Laser Engraved On Side)
Limited Warranty
- UPC: 617201300114
- MPN: UP-7.5N-7F-A2
25 months ago
,
by Dealer
$1,295.95
Pack a punch with our new two-tone black and OD Green anodized pistol that we call “The Green Monster.” The Monster is 5.56×45 mm (also runs .223). This pistol comes with a 7.5 in barrel and an anodized green free float M-LOK handguard. Veriforce Tactical puts our reputation behind this pistol-we have been making AR-15 pistols since 2003. Veriforce Tactical is well known for making some of the finest AR black and OD Green pistols on the market. Veriforce Tactical takes extra steps so that our manufactured parts exceed mil standard. Or “mil-spec” for the “operators” out there.
- UPC: 617201321096
- MPN: GMONSTER-1
25 months ago
,
by Dealer
Check out our new two-tone black and bronze anodized pistol that we call “The Bulldog”. This pistol is built with a 7 1/2 inch barrel, a bronze free float M-LOK handguard and runs 5.56x45mm (also runs with .223). Veriforce Tactical puts our reputation behind it and we have been making AR-15 pistols since 2003. Veriforce Tactical is well known for making some of the finest AR black and brown pistols on the market. Veriforce Tactical takes extra steps so that our manufactured parts exceed mil standard, or “mil-spec” for the “operators” out there.
- UPC: 617201321089
- MPN: BULLDOG-1
26 months ago
,
by Dealer
Check out our new full Anodize Purple AR 15 pistol for sale we call “The People Eater”. 5.56x45mm (works with .223 also) with a 7 1/2 inch barrel in Rainbow PVD Coating!, free float M-LOK Handguard with a full Purple Anodized finish. You won’t find anything more unique online. Veriforce Tactical puts our reputation behind it. Veriforce Tactical has been making AR-15 pistols since 2003. Veriforce Tactical is well known for making some of the finest AR Purple pistols on the market. Veriforce Tactical takes extra steps so that our manufactured parts exceed mil standard.
- UPC: 617201321065
- MPN: PURP-P-EATER-1
26 months ago
,
by Dealer
Check out our new full Grey AR 15 pistol for sale we call the “Grey Ghost”. 5.56x45mm (works with .223 also) with a 7 1/2 inch barrel, free float M-LOK Handguard with a full Grey Anodized finish. You won’t find anything more unique online. Veriforce Tactical puts our reputation behind it. Veriforce Tactical has been making AR-15 pistols since 2003. Veriforce Tactical is well known for making some of the finest AR Grey pistols on the market. Veriforce Tactical takes extra steps so that our manufactured parts exceed mil standard. Or “mil spec” for the “operators” out there.
- UPC: 617201321058
- MPN: BB-GGHOST-1
26 months ago
,
by Dealer
Fits all AK47 charging handles, even Yugo and SAIGA
Made of steel
AKs are not precision machined charging handles, there will be some that are tight and some that just will not fit. These fit 99% of all AK47s
Set screws on, must use thread locker (MUST USE loctite)
Very easy install
Made charging your AK47 handle easier
- UPC: 617201301784
- MPN: VTAKK-1
27 months ago
,
by Dealer
FFL item: Must be Shipped to an FFL
Enhanced ALG Trigger
North Star Arms
Made in Phoenix, AZ
Mil-Spec buffer tube
Hogue over mold Stock Shell, Grip, and Trigger Guard
Marked “Cal 5.56MM”
Mil-Spec lower parts kit (USA Made) and buffer spring and 3oz buffer installed
Markings for selector are “SAFE” and “FIRE”
Standard Commercial Trigger Pocket
Complete AR-15 lower receiver to work with most calibers such as 5.56, .223, 300 blackout, 7.62×39, 6.5 Grendel, .224 Valkyrie, etc..
Does not work with .308 or 6.5 Creedmoor
- UPC: 617201307496
- MPN: NSA-LOWER
27 months ago
,
by Dealer
Check out our new full red Dirty Devil AR 15 pistol for sale. 5.56x45mm (works with .223 also) with a 10 1/2 inch barrel, free float M-LOK Handguard with a full red anodized finish. You won’t find anything more unique online. Veriforce Tactical puts our reputation behind it. Veriforce Tactical has been making AR-15 pistols since 2003. Veriforce Tactical is well known for making some of the finest red AR-15 pistols on the market. Veriforce Tactical takes extra steps so that our manufactured parts exceed mil standard. Or “mil-spec” for the “operators” out there.
- UPC: 617201321034
- MPN: DD-PISTOL1
27 months ago
,
by Dealer
Check out our new full Burnt Bronze AR 15 pistol for sale we call “The Legion”. 5.56x45mm (works with .223 also) with a 7 1/2 inch barrel, free float M-LOK Handguard with a full burnt bronze finish. You won’t find anything more unique online. Veriforce Tactical puts our reputation behind it. Veriforce Tactical has been making AR-15 pistols since 2003. Veriforce Tactical is well known for making some of the finest AR Burnt Bronze pistols on the market. Veriforce Tactical takes extra steps so that our manufactured parts exceed mil standard. Or “mil spec” for the “operators” out there.
- UPC: 617201321041
- MPN: BB-LEGION1
28 months ago
,
by Dealer
Our Golden Eye series is a limited run of locally done gold anodizing by Southwest Anodize. We bead blast each piece to get that “mat” gold look that’s not too shiny. For this kit we did our billet upper, 15″ Ultralight Full M-LOK, skeleton grip, and mil-spec buffer tube. Check out our fully assembled lowers as well. We pride ourselves on wowing our customers. When you get this Upper set from us, we want your expectations to be blown away in quality, looks and accuracy!
- UPC: 617201305966
- MPN: GOLDEN-UPPER-KIT
28 months ago
,
by Dealer
When Assembled, this will be 19.33″ long from back to front!
Our Barrel nuts are cut from bar stock carpenter 4140 steel and milled out, giving you a better than mil-spec hold for your barrel extension. We torque our barrel nuts 40-80 lbs onto our uppers, giving no chance of loosening while you shoot.
- UPC:
- MPN: MICRO-UPPER-KIT-GREY
31 months ago
,
by Dealer
Check out our new two tone black and clear sliver anodize that we call “The Raider”. 5.56x45mm (works with .223 also) with a 7 1/2 inch barrel, free float M-LOK Handguard with a Black and Silver anodize finish. Want to show you love of Black and Silver love. Veriforce Tactical puts our reputation behind it. Veriforce Tactical has been making AR-15 pistols since 2003. Veriforce Tactical is well known for making some of the finest AR black and sliver pistols on the market. Veriforce Tactical takes extra steps so that our manufactured parts exceed mil standard.
- UPC: 617201321072
- MPN: RAIDER-1