3CR Tactical Coupon Codes, Discounts and Deals
(136 deals total)
Filter 3CR Tactical Coupon Codes, Discounts and Deals
34 months ago
,
by Dealer
Manufactured from 416 stainless steel
Professionally applied graphite black cerakote
Rear serrations for ease of operation
Side and top ports for showcasing the barrel, weight reduction and cooling
Iron sight cuts for static sights
Heat treated to 38-42 HRC
RMR cut for Trijicon base optic
Manufactured by Live Free Armory in Melbourne, Florida
- UPC:
- MPN:
3CR Tactical
194
34 months ago
,
by Dealer
DISCLAIMER:
This product is not manufactured, authorized, endorsed, or warranted by GLOCK. GLOCK does not warrant or represent that this product is compatible with GLOCK pistols.
Black cerakote coated, CNC cut for barrel cooling, and for that Gucci build.
Trijicon RMR cut for mounting an optic.
Rear diagonal serrations make for ease of operation.
Will fit standard Glock 19 Gen 1-3 slide completion kits and barrels.
Made of US sourced 4150 steel.
Fits OEM Glock and Polymer80 PF940C frames.
- UPC:
- MPN:
3CR Tactical
1136
35 months ago
,
by Dealer
DISCLAIMER:
This product is not manufactured, authorized, endorsed, or warranted by GLOCK. GLOCK does not warrant or represent that this product is compatible with GLOCK pistols.
Our standard Glock 19 slide finished in snow camouflaged cerakote.
Comes with cuts for installing iron sights. Front and rear serrations make for ease of operation.
Trijicon RMR cut for mounting an optic.
Will fit standard Glock 19 slide completion kits and barrels.
Fits OEM Glock Gen 3 and Polymer80 PF940C frames.
- UPC:
- MPN:
3CR Tactical
714
35 months ago
,
by Dealer
Forged from 6061 aluminum
Un-anodized, steel finish
Non-serialized. No FFL required
Marked fire/safe
We cannot accept returns for 80% receivers.
State restrictions apply.
- UPC:
- MPN:
3CR Tactical
202
36 months ago
,
by Dealer
DISCLAIMER:
This product is not manufactured, authorized, endorsed, or warranted by GLOCK. GLOCK does not warrant or represent that this product is compatible with GLOCK pistols.
Complete OEM spec lower parts kit is made for the Glock 26 Gen 3 but will also work with Polymer80 PF940SC frames.
OEM Glock locking block is not included. Polymer80 frame kits ship with their own locking block.
Kit Includes:
Connector
Extended Slide Stop Release with Spring
Locking Block Pin
Magazine Release
Magazine Release Spring
Slide Lock
Slide Lock Spring
Trigger Housing Pin
- UPC:
- MPN: LPK-G26
36 months ago
,
by Dealer
DISCLAIMER:
This product is not manufactured, authorized, endorsed, or warranted by GLOCK. GLOCK does not warrant or represent that this product is compatible with GLOCK pistols.
Everything that you need to finish your Glock or a Polymer 80 Lower. These OEM spec parts are machined to exact specifications to make sure that you have a well-functioning Glock. Our lower Parts Kit comes with an Adjustable Trigger and safety bar with 5.5 lb trigger pull.
OEM Glock locking block is not included. Polymer80 frame kits ship with their own locking block.
Kit Includes:
- UPC:
- MPN:
3CR Tactical
1582
36 months ago
,
by Dealer
DISCLAIMER:
This product is not manufactured, authorized, endorsed, or warranted by GLOCK. GLOCK does not warrant or represent that this product is compatible with GLOCK pistols.
Our standard black nitride coated Glock 19 slide comes with cuts for installing iron sights. Rear diagonal serrations make for ease of operation.
Will fit standard Glock 19 Gen 1-3 slide completion kits and barrels.
Made of US sourced 4150 steel.
Fits OEM Glock and Polymer80 PF940C frames.
- UPC:
- MPN:
3CR Tactical
2645
37 months ago
,
by Dealer
Chambered in 5.56 NATO
Government profile
16″ length
Mid-length length gas system
1:7 right-hand twist
4140 chrome-moly lining
Hard black nitride coating
0.063″ gas port
0.750 gas block journal
29 oz weight
- UPC:
- MPN:
3CR Tactical
200
37 months ago
,
by Dealer
Assembled .308 anodized upper receiver
DPMS style
Installed forward assist and dust cover
7075-T6 aluminum
Hard coat anodized
- UPC:
- MPN:
3CR Tactical
222
38 months ago
,
by Dealer
These complete pistol upper receivers are made from the highest quality USA produced components out there. All of our complete uppers are fully assembled, test fired, and ready to pin to the lower receiver of your choice.
10.5″ 4150CMV Barrel – 1:7 twist – carbine gas system – stress relieved – black nitride finish
9.85″ Premium free float MLOK handguard with top picatinny rail
Forged 7075-T6 upper receiver – hard coat anodized
bolt carrier group – 9310 bolt – billet extractor – nitride finish
birdcage flash hider – nitride finish
Free UPS Ground Shipping.
- UPC:
- MPN:
3CR Tactical
801
38 months ago
,
by Dealer
Everything you need to build out a high quality AR15 carbine using whatever lower receiver you want. Test-fired, and quality checked , these AR15 rifle kits will provide you a lifetime of reliable service. Built of only quality USA manufactured parts. Each unit is assembled with care and fully tested to ensure that your build will function the first time. Compatible with any mil-spec dimension AR15 lower receiver.
Upper Receiver
16″ 4150CMV Barrel – 1:7 twist – mid-length gas system – nitride finish
- UPC:
- MPN:
3CR Tactical
1228
38 months ago
,
by Dealer
Complete built upper receiver:
16″ heavy profile 4150 chrome vanadium lined barrel, chambered in 5.56 with a 1:7 twist
Low profile gas block
Carbine length gas system
15″ keymod handguard
Flat-top mil-spec Cerro upper receiver with installed dust cover and forward assist
No BCG or charging handle
Note: barrel twist may vary between 1:7 and 1:8 based on market availability.
Check out all our other upper options here: https://3crtactical.com/product-category/uppers-and-parts/
- UPC:
- MPN:
3CR Tactical
506
38 months ago
,
by Dealer
Complete built upper receiver:
16″ 4150 chrome vanadium lined barrel, chambered in .223 wylde with a 1:7 twist
Low profile gas block
Carbine length gas system
15″ keymod handguard
Flat-top mil-spec Cerro upper receiver with installed dust cover and forward assist
No BCG or charging handle
Note: barrel caliber and twist may vary between 5.56 and 1:8 based on market availability.
- UPC:
- MPN:
3CR Tactical
2226
39 months ago
,
by Dealer
DISCLAIMER:
This product is not manufactured, authorized, endorsed, or warranted by GLOCK. GLOCK does not warrant or represent that this product is compatible with GLOCK pistols.
Hard black DLC (diamond like carbon) finish
Trijicon RMR cut for optics or cover plate
Iron sight cuts
Front and rear serrations for ease of operation
Included matching cover plate
Compatible with OEM Glock Frames / Polymer80 PF940SC
Note: It is strongly advised to lubricate the rails before installing as this will allow the slide to break in properly.
- UPC:
- MPN:
3CR Tactical
4866
39 months ago
,
by Dealer
DISCLAIMER:
This product is not manufactured, authorized, endorsed, or warranted by GLOCK. GLOCK does not warrant or represent that this product is compatible with GLOCK pistols.
9mm Completion Kit for Glock Slides. Compatible with Glock 43.
Kit Includes:
Firing Pin Safety
Firing Pin Safety Spring
Firing Pin
Extractor Depressor Plunger Spring
Channel Liner
Spacer Sleeve
Firing Pin Spring Mid-Weight
Extractor 9mm
Firing Pin Spring Cup
Cover Plate
Extractor Depressor Plunger
OE dual action Glock 43 Guide Rod
- UPC:
- MPN:
3CR Tactical
591
39 months ago
,
by Dealer
Complete built upper receiver:
Parkerized 4150 chrome vanadium barrel, chambered in .223 wylde with a 1:7 twist
N3 Birdcage flash hider
Carbine length gas system
15″ m-lok handguard
Flat-top mil-spec upper receiver with installed dust cover and forward assist
No BCG or charging handle
- UPC:
- MPN:
3CR Tactical
1413
39 months ago
,
by Dealer
Complete built upper receiver:
10.5″ barrel chambered in 300BLK with a 1:8 twist
Birdcage flash hider
Pistol length gas system
10″ m-lok handguard
Flat-top mil-spec upper receiver with installed dust cover and forward assist
No BCG or charging handle
- UPC:
- MPN:
3CR Tactical
3593
40 months ago
,
by Dealer
Our M16 Bolt Carrier Group is a quality part for your next build. The full mass M16 pattern 8620 steel bolt carrier has been treated with a super slick salt bath nitride finish for easy cleaning, reduced friction, and a reduced need for lubrication. The 9310 steel 5.56 NATO pattern bolt assembly has a durable manganese phosphate finish. A properly staked gas key and forward assist serrations round out the great features. To top it off, each bolt carrier group is magnetic particle inspected to give you peace of mind that your carrier group is from from material defects.
Specifications:
- UPC:
- MPN:
3CR Tactical
3116
41 months ago
,
by Dealer
Chambered in 5.56 NATO
16″ length
ATF compliant caliber marking on barrel
Carbine length gas system
1:8 right-hand twist
4140 chrome-moly lining
Hard black nitride coating
0.063″ gas port
29.1oz weight
- UPC:
- MPN:
3CR Tactical
468
41 months ago
,
by Dealer
$199.99
DISCLAIMER:
This product is not manufactured, authorized, endorsed, or warranted by GLOCK. GLOCK does not warrant or represent that this product is compatible with GLOCK pistols.
Our RMR Glock 26 slide finished in Olive Drab Green cerakote with matching cover plate. Comes with cuts for installing iron sights. Front and rear serrations make for ease of operation.
Will fit standard Glock 26 slide completion kits and barrels.
Fits OEM Glock Gen 3/4 and Polymer80 frames.
- UPC:
- MPN:
3CR Tactical
917
43 months ago
,
by Dealer
DISCLAIMER:
This product is not manufactured, authorized, endorsed, or warranted by GLOCK. GLOCK does not warrant or represent that this product is compatible with GLOCK pistols.
Complete OEM spec lower parts kit is made for the Glock 19 but will also work with Polymer80.
Kit Includes:
Connector
Extended Slide Stop Release with Spring
Locking Block Pin
Extended Magazine Release (Glock 17/19)
Magazine Release
Magazine Release Spring
Slide Lock
Slide Lock Spring
Trigger Housing Pin
Trigger Housing with Ejector
Trigger Pin
- UPC:
- MPN:
3CR Tactical
2467
44 months ago
,
by Dealer
Complete built upper receiver:
Heavy 4150 chrome vanadium barrel, chambered in 5.56NATO with a 1:7 twist
Birdcage flash hider
Carbine length gas system
15″ m-lok handguard
Flat-top mil-spec upper receiver with installed dust cover and forward assist
No BCG or charging handle
- UPC:
- MPN:
3CR Tactical
734
44 months ago
,
by Dealer
$199.99
DISCLAIMER:
This product is not manufactured, authorized, endorsed, or warranted by GLOCK. GLOCK does not warrant or represent that this product is compatible with GLOCK pistols.
Our standard Glock 19 slide finished in Sniper Grey cerakote. Comes with cuts for installing iron sights. Front and rear serrations make for ease of operation.
Will fit standard Glock 19 Gen 3 slide completion kits and barrels.
Fits OEM Glock Gen 3 and Polymer80 PF940C frames.
- UPC:
- MPN:
3CR Tactical
376
44 months ago
,
by Dealer
Oversized ambidextrous release levers.
Type III hard coat anodized.
For AR15 rifles.
- UPC:
- MPN:
3CR Tactical
699
44 months ago
,
by Dealer
Oversized ambidextrous release levers with CNC engraved inlaid design. Type III hard coat anodized.
For AR15 rifles.
- UPC:
- MPN:
3CR Tactical
653
45 months ago
,
by Dealer
DISCLAIMER:
This product is not manufactured, authorized, endorsed, or warranted by GLOCK. GLOCK does not warrant or represent that this product is compatible with GLOCK pistols.
Everything needed to complete a stripped Glock 17 Gen 3 slide, except for the barrel and sights.
All parts are built to OEM spec and made in the USA.
9mm firing pin
Firing pin spring & spacer sleeve
2x spring cups
Extractor depressor plunger & plunger spring
Spring-loaded bearing
Firing pin safety & safety spring
Slide plate cover
Extractor
Channel liner
- UPC:
- MPN:
3CR Tactical
497
45 months ago
,
by Dealer
DISCLAIMER:
This product is not manufactured, authorized, endorsed, or warranted by GLOCK. GLOCK does not warrant or represent that this product is compatible with GLOCK pistols.
Complete Glock 19 Gen 3 black-nitride slide with front and rear diagonal serrations for ease of operation. Slide design is a limited run.
Slide completion kit with marine spring cups professionally installed.
Black nitride barrel and upgraded stainless steel guide rod included.
Add your own sights.
100% US Made Using U.S. Sourced 416 Stainless Steel
Heat Treated
- UPC:
- MPN:
3CR Tactical
3633
45 months ago
,
by Dealer
$259.99
Complete built upper receiver:
M4 profile parkerized, 4150 chrome vanadium lined barrel, chambered in .223 wylde with a 1:7 twist
Nitride Birdcage flash hider
Carbine length gas system
13.5″ m-lok handguard
Flat-top mil-spec Cerro upper receiver with installed dust cover and forward assist
No BCG or charging handle
Note: Barrel caliber may be 5.56 based on market availability.
- UPC:
- MPN:
3CR Tactical
713
46 months ago
,
by Dealer
T6-7075 aluminum
Black anodized finish
Non-serialized. No FFL required
Complete rear takedown lug pocket
Manufactured by Cerro
- UPC:
- MPN:
3CR Tactical
1344
46 months ago
,
by Dealer
Everything needed to complete a fully functional AR-15 carbine , less a stripped lower receiver.
Built upper receiver with 15″ m-lok handguard, 16″ M4 4150 chrome vanadium 1:8 twist barrel, carbine gas system, forward assist, dust cover and birdcage flash hider installed
Black nitride bolt carrier group
Standard mil-spec charging handle
Mil-spec 5-position buffer tube kit
Adjustable carbine butt stock with recoil pad
Anderson Gen 2 lower parts kit
Front and rear flip-up polymer sights
- UPC:
- MPN:
3CR Tactical
1706
47 months ago
,
by Dealer
Stainless steel .154 standard anti-walk pins with side plates. These are designed to prevent your hammer/trigger pins from coming out. We do recommend using thread locker when installing these.
The side plates keep the tension off the pins during operation thereby preventing the pin holes from enlarging. A must when using an 80% lower.
Hex screws (x4) and wrench
2 side plates
2 stainless steel standard .154 trigger/hammer pins
Drop-in release
- UPC:
- MPN: 3CRPK02
47 months ago
,
by Dealer
$65.00
DISCLAIMER:
This product is not manufactured, authorized, endorsed, or warranted by GLOCK. GLOCK does not warrant or represent that this product is compatible with GLOCK pistols.
Anderson Manufacturing, long known for their budget conscious AR parts has entered the Glock parts game by bringing out a slide completion kit with an included recoil rod and channel liner install tool. This kit contains everything you need to complete a Glock 19 Gen 3 slide (will also work for Polymer80 PF940C builds) except the barrel and sights.
KIT INCLUDES:
- UPC:
- MPN: G2-N640-0019
47 months ago
,
by Dealer
28 Piece kit. All heat treated parts.
AR-15 Standard Safety Selector Lever- 1 pc
AR-15 Safety Spring and Detent pin- 1 set
AR-15 Magazine Catch Kit with mag catch, release button and spring- 1 set
AR-15 Bolt Catch Assembly Kit with Plunger, Spring & Roll Pin- 1 set
223 308 Buffer Tube Detent Plunger & Retainer Spring – 1 set
AR-15 Takedown Pin & Pivot Pin – 2 Pcs
AR-15 Takedown/Pivot Pin Detents & Springs – 2 sets
AR-15 Hammer & Trigger Pin – 1 set
AR-15 Hammer Spring – 1 pc
AR-15 Trigger Spring – 1 pc
- UPC:
- MPN: LPK-WO-H-T-G
48 months ago
,
by Dealer
DISCLAIMER:
This product is not manufactured, authorized, endorsed, or warranted by GLOCK. GLOCK does not warrant or represent that this product is compatible with GLOCK pistols.
DLC (Diamond Like Carbon) coated Glock 19 Gen 1-3 slide comes with cuts for installing iron sights. Front and rear serrations make for ease of operation.
Will fit standard Glock 19 slide completion kits and barrels.
Fits OEM Glock and Polymer80 PF940C frames.
Note: It is strongly advised to lubricate the rails before installing as this will allow the slide to break in properly.
- UPC:
- MPN: 3CR-G19-DLC-SLD
48 months ago
,
by Dealer
A great combo of an 80% anodized AR-15 lower receiver with a jig kit with tooling for completing this for a functional lower receiver.
Includes:
Anderson Gen 2 AR-15 80% Lower Receiver – Black Anodized finish
Anderson Gen 2 AR-15 Lower Jig Kit
Cannot be shipped to: NJ.
- UPC:
- MPN:
3CR Tactical
5165
48 months ago
,
by Dealer
DISCLAIMER:
This product is not manufactured, authorized, endorsed, or warranted by GLOCK. GLOCK does not warrant or represent that this product is compatible with GLOCK pistols.
All the internal parts necessary to finish a Glock (Gen 1-3) or Polymer80 slide less the barrel and sights.
PF series kit contains red/black plastics and upgrades stainless steel components.
Select Glock 19/17/26 recoil rod assembly before checking out.
- UPC:
- MPN:
3CR Tactical
1103
49 months ago
,
by Dealer
• Pulling from either side will result in a smooth, reliable pull.
• Non-slip design with ‘cut-out’ edges works great with gloved hands for a dependable action.
• Rear lip raised to help re-direct gasses from short-barreled or suppressed rifles.
• Made from 7075-T6 Aluminum, hard-coated anodized (anodized red)
- UPC:
- MPN:
3CR Tactical
507
49 months ago
,
by Dealer
Pulling from either side will result in a smooth, reliable pull.
Non-slip design with ‘cut-out’ edges works great with gloved hands for a dependable action.
Rear lip raised to help re-direct gasses from short-barreled or suppressed rifles.
Left lever .85”, right lever 1” (width)
Length 7 inches, Width 2.56”
Made from Strong Aircraft Grade T6 Aluminum, hard-coated anodized (red)
- UPC:
- MPN:
3CR Tactical
688
49 months ago
,
by Dealer
DISCLAIMER:
This product is not manufactured, authorized, endorsed, or warranted by GLOCK. GLOCK does not warrant or represent that this product is compatible with GLOCK pistols.
Glock 19 Gen 3 Nitride Slide with Front and Rear Serrations and Sights
9mm
100% US Made Using U.S. Sourced 416 Stainless Steel
Heat Treated
Ferritic-Nitrocarburized (Melonite™) for an Ultra-Durable Black Finish that is Integral to the Unit’s Performance and Function
Front and Rear Serrations
Glock Factory White Dot Sights
Gen 3
- UPC:
- MPN:
3CR Tactical
3007
50 months ago
,
by Dealer
DISCLAIMER:
This product is not manufactured, authorized, endorsed, or warranted by GLOCK. GLOCK does not warrant or represent that this product is compatible with GLOCK pistols.
Our standard black nitride coated Glock 17 slide comes with cuts for installing iron sights. Front and rear serrations make for ease of operation.
Will fit standard Glock 17 slide completion kits and barrels.
Fits OEM Glock and Polymer80 PF940V2 frames.
- UPC:
- MPN:
3CR Tactical
1571
50 months ago
,
by Dealer
Smooth black finish
Constructed of 4140 steel
Micro profile design
Includes gas roll pin
Comes with set screws and wrench
Internal diameter of 0.750″
- UPC:
- MPN:
3CR Tactical
108
50 months ago
,
by Dealer
DISCLAIMER:
This product is not manufactured, authorized, endorsed, or warranted by GLOCK. GLOCK does not warrant or represent that this product is compatible with GLOCK pistols.
All the major components to kick start a Polymer80 subcompact pistol that is compatible with Glock 26 Gen 3 parts.
Kit includes:
Polymer80 PF940SC Frame Kit and Jig
Black Nitride RMR cut Windowed Slide
9mm Glock 26 Stainless steel replacement barrel
Requires internals, sights and a magazine to build a complete pistol.
- UPC:
- MPN:
3CR Tactical
3297
50 months ago
,
by Dealer
DISCLAIMER:
This product is not manufactured, authorized, endorsed, or warranted by GLOCK. GLOCK does not warrant or represent that this product is compatible with GLOCK pistols.
A combo pack of our two best-selling house TBC and 9mm micro compensators/muzzle brakes for Glock pistols.
Fits 1/2 x 28 TPI 9mm barrels.
Sets screws included.
- UPC:
- MPN:
3CR Tactical
1696
51 months ago
,
by Dealer
DISCLAIMER:
This product is not manufactured, authorized, endorsed, or warranted by GLOCK. GLOCK does not warrant or represent that this product is compatible with GLOCK pistols.
The Glock Micro Compensator is threaded in the standard 1/2×28 thread pitch.
- UPC:
- MPN: 3CRGC02
51 months ago
,
by Dealer
The Glock Micro Compensator is threaded in the standard 9/16 x 24 thread pitch for .40 S&W/10mm caliber barrels. Commissioned off of our popular TBC 9mm micro compensator, this version for .40 S&W caliber Glocks will provide similar results.
- UPC:
- MPN:
3CR Tactical
2223
52 months ago
,
by Dealer
This barrel is a drop-in replacement for the factory Glock 19 barrel.
9mm caliber
1:16 twist
Threaded (1/2 x 28 TPI)
Full Length
4150 Gold Nitride finish
- UPC:
- MPN:
3CR Tactical
931
52 months ago
,
by Dealer
Get both of these together and save. The bead blasted barrel is a drop-in replacement for Glock 19 pistols and the included TBC compensator is both stylish and functional to reduce recoil and muzzle rise.
Bead Blasted barrel specs:
9mm caliber
1:16 twist
Threaded (1/2 x 28 TPI)
Full Length
416R matte-grey bead-blasted finish
- UPC:
- MPN: GLK19-TBC-CMBO-BB
52 months ago
,
by Dealer
Dual latching ambidextrous charging handle with an extended latch for increased handling and dexterity. For AR15 rifles.
- UPC:
- MPN: 3CRCH223-09
52 months ago
,
by Dealer
$339.99
The new HE508T Micro Red Dot System from Holosun is a pistol-sized optic with an open frame for a great sight picture, clear glass and a indestructible CNC machined Titanium housing. It is powered by a CR2032 battery and Holosun’s innovative Solar Fail-safe back up. The HE508T will run up to 10 years on a single battery on setting 6, dot only. Featuring our Multi-reticle system, the HE508T allows the operator to switch the reticle between a 32 MOA circle with 2 MOA dot, a 2 MOA dot only, or a 32 MOA ring only, all at the push of a button.
- UPC: 605930624731
- MPN: HE508TR
52 months ago
,
by Dealer
Glock 17 Gen 3 Nitride Slide with Front and Rear Serrations and Sights. Also compatible with Polymer80 PF940V2 frame kits.
9mm
100% US Made Using U.S. Sourced 416 Stainless Steel
Heat Treated
Ferritic-Nitrocarburized (Melonite™) for an Ultra-Durable Black Finish that is Integral to the Unit’s Performance and Function
Front and Rear Serrations
Glock Factory White Dot Sights
Gen 3
9mm Completion Kit for Glock Slides. Compatible with Gen 3 Glock 17
Kit Includes:
Firing Pin Safety
Firing Pin Safety Spring
Firing Pin
- UPC:
- MPN:
3CR Tactical
2384
53 months ago
,
by Dealer
Magpul MOE K2 Pistol Grip
The MOE K2 is one of MAGPUL’s newest addition in the Series. MAGPUL’S reinforced polymer body with a comfortable anatomical design provides the Patriot with maximum control in the most adverse conditions/environments. The MAGPUL K2 is a drop-in polymer upgrade that offers a a more user-friendly geometry with a more vertical grip angle.
Magpul MOE Carbine Stock
- UPC:
- MPN:
3CR Tactical
762
54 months ago
,
by Dealer
Un-assembled combo of our best seller .750 steel low profile gas block and choice of black nitride (melonte) finished gas tube.
Gas Tube
Mil-spec gas tubes with a durable black nitride finish that increases corrosion resistance and protects against wear and tear. Matches the black rifle finish better than standard stainless steel tubes.
Gas Block
Smooth black finish
Constructed of 4140 steel
Micro profile design
Includes gas roll pin and set screws
Internal diameter of 0.750″
- UPC:
- MPN:
3CR Tactical
176
54 months ago
,
by Dealer
Combo of screw-in Glock OEM front sight and OEM Glock White Dot Adjustable Rear Sight (comes with screwdriver for adjustments).
Front sight fits all models, rear sight will fit all except Glock 42/43.
Comes in bulk packaging.
- UPC:
- MPN: SP07079-SP05977
54 months ago
,
by Dealer
$27.99
Dual latching ambidextrous aluminum charging handle for 7.62 NATO or AR10/SR-25/DPMS LR-308 patterned rifles.
Allows for rapid operation with either hand.
Matte black with hard coat anodized finish.
Does not fit:
SIG Sauer 716
DPMS G2 .308
Colt 901
- UPC:
- MPN: 3CRCH308-05
54 months ago
,
by Dealer
$103.48
Get both of these together and save. The black nitride barrel is a drop-in replacement for Glock 19 pistols and the included TBC compensator is both stylish and functional to reduce recoil and muzzle rise.
Barrel specs:
9mm caliber
1:16 twist
Threaded (1/2 x 28 TPI)
Full Length
4150 Black Nitride finish
- UPC:
- MPN:
3CR Tactical
3034
55 months ago
,
by Dealer
GLOCK OE Guide Rod.
Compatible with Gen 1/2/3 Glock 19/23/32/38 Pistols.
- UPC:
- MPN: GL-SL-G19-3-GR
55 months ago
,
by Dealer
The Glock Micro Comp is threaded in the standard 1/2×28 thread pitch.
It will work on most 9mm Glock barrels threaded in that pitch, including most 40-9 conversion barrels. The Micro Comp only adds about .45″ to the end of your threaded barrel. Our comp was designed for the Glock 19 and when installed will fit in all Glock 34/35 holsters. Although the comp was designed around the Glock 19, it will work very well with any 9mm Glock and will function with any open ended holsters in the event the gun is longer than the holster.
- UPC:
- MPN: 3CRGC01
55 months ago
,
by Dealer
The Bravo fixed stock is a fixed featureless butt stock option that fits any mil-spec buffer tube (not included). The stock features the double injected rubber cheek rest for ergonomic comfort. Modern angular designs and integrated ambidextrous QD swivel sockets for sling points.
Fixed stock design
Multiple sling attachment points including QD swing swivel
Double injected rubber cheek rest
Rubber butt-pad
Easy assembly
Lifetime warranty
- UPC:
- MPN: TBA07B
56 months ago
,
by Dealer
21 piece oops lower parts kit. All springs and detents for .223 / 5.56. No hammer, trigger or grip.
Those springs and detents love to fly and hide. Installing them inside of a plastic grocery bag can usually help prevent them from getting lost. For cases when you have lost pieces, this kit can get you up and running.
- UPC:
- MPN: CRPK07
56 months ago
,
by Dealer
Package includes:
One Extended Pivot pin
One Extended Take down pin
Two Detents
Two Detent Springs
- UPC:
- MPN: 3CRPK03