This merchants track record isn't that good.
http://www.resellerratings.com/store/13deals...
Nice note of them.
Note: If you plan on firing this crossbow even more than just occasionally, you should pick up some extra crossbow string at your local sporting goods store.
This KILT the BAR that KILT me.
Keep your powder dry and watch your topknot!
And you yourn! Pilgrim
I'd rather have a full time night woman!
I’m gonna report you are a Trump y’all are gouging the mask
check reseller ratings. consistent one star. don't think I've seen rating this bad. https://www.resellerratings.com/store/13deals... also look at posts about shipping times.
Price gouging pussy fucks. I hope you get the Kona
It also comes in pink, for those more secure men.... ;) http://1saleaday.com/flash/bpgdpbp1000p/...
Don't know too much more about this one, other than it's $88+ @ Amazon so this may be a decent deal.
Just bought two of these for $45 each last week from Amazon ( 55 each plus 20 off 100 yeah crazy deal) Reticle is cool but don't waste your time They take a weird AG5 battery Got mine to the range and it had...
Sure it was this model? That's a lot less than Amazon wants for them now. Lowest I see is $84.98 from a 3rd party. There's apparently a whole bunch of different "Ultra Shot" models that look alike.
Did you even use it yet? Mine is being delivered today from Amazon and I got a pack of 10 spare batteries for 1.99 shipped to go with it.
Positive it was that model Showing 88 97 from OpticsPlanet right now (amazon must be out) Here is product that I ordered http: www amazon com gp product B004TDIDW6 Here is invoice http: screencast com t...
They were 54.99 shipped a few days back at Amazon. They have since sold out and are now sold by 3rd party sellers.
BTW - For what it's worth, here's the cross over on the AG5 battery: Common Name:SR48 Other Common Names: AG5/SG5, LR48, 193/309/393 IEC Name: LR754 (L), SR754 (S) ANSI/NEDA: 1136SO (S), 1137SO (S) Capacity mAh: 52 (L),...
Like I said I took it to the range and the batteries were dead I had installed it and boresighted it I like the reticles they had a lot of promise Yeah I had actually already ordered some spare batteries off of...
Good deal they want almost $80 for a "warehouse deal" now (aka used!) I missed that one Have you shot with it? Is this deal worthwhile for those that missed that one? I'm in the market for one for her AR and it...
OK cool. Well the mail lady just came and mine is here. I won't be able to try it out at the range until after the first of the year. Seems well built and solid. Like it so far need to put a few hundred rounds down range...
These are good sights. Although i dont own the QD version, both of my Sightmarks on my AR and Troy ind. 10/22 both hold zero just fine. I have seen these priced from $45 to $99 over the last couple of months
Bought one of these back in July and it has seen very light use on an S&W 15 22 (maybe 500 rounds) It has already developed problems staying on When you hit the "on" button it will now flash on at full brightness...
4.8/5 stars @ Amazon... http://tinyurl.com/q7b22gk...
As an update to this, the company had me send in my old sight, and sent me a brand new one very quickly. Great customer service. So I guess if you are worried about the sight not working well, at least you know you will...
That seems like a really good price for NIB BCG. I wonder why this isn't receiving any TU?
Very active on facebook, tons of likes, quick search found no major gripes with this company, in for 1.
I ordered one as well.. let's see!
Shipping kills the deal if you only purchase 100 rds Adding more to cart doesn't increase the shipping cost too much I live in GA Here is my total cost for 500 rds + 5 plastic ammo boxes: Subtotal: $180 00 Shipping:...
dunno why gun.deals altered and f^cked-up the description I entered....... 100 ROUNDS - PACKED IN PLASTIC AMMO CAN. Manufactured by Igman. Igman has been producing the highest quality ammo for 60+ years in their Bosnian...
Agree with your sentiment, however those ammo boxes are pretty much useless in most cases.
Thanks BPuff57. I don't have any experience with the ammo or the boxes. The ammo sounds promising to me. It reminds me of some NATO spec Yavex brand ammo that I purchased a few years ago and am almost out of. Loaded hot,...
Igman has been making ammo a long time and it's pretty much nato milspec across the board I've shot it it's about the same as IMI or ADI good solid reliable and pretty much unknown in the US You won't have any...
Keep the ‘free’ ammo box, ship it in a plastic bag and charge less..
Howdy Thorax. I had/have a strong hunch that it is good ammo. Thanks for the confirmation.
Hello. And Bye.
Total cost including tax and shipping to GA for me comes to $353.59
Thanks Panheadude.
I don't have any personal experience with this ammo but it sounds good to me Once fired brass One free plastic ammo can per 500 rounds ordered Good reviews from buyers My total cost for two orders (1000 rounds and...
8/25/2022 Edit - Total cost including tax and shipping to GA for me comes to $317.23 8/11/2022 - With the price drop, total cost including tax and shipping to GA for me comes to $321.79. (.32 CPR) Coupon code "DEC20" is...
.
At Grab a Gun grand total is $60.85 for me, not much, but lower.
Thanks for the update, corrected the price in the listing.
$58.39 total from WC Armory, have ordered from them - this exact part. Very happy
http://www.wcarmory.com/cmmg-55ca6c5-lpk-lower-parts-kit-556.htm...
Price is $57.94, although I can't edit the post anymore.
i disagree with whoever said 'this is the best price'.. i got the dpms one for $40 shipped a few mos ago... shop around, price match, coupons, etc..
Is CMMG a better parts kit than an Anderson? Any firsthand experience?
This guy makes awesome super detailed videos on YouTube. Look up 2phast tactical.
Both my rifles have CMMG parts kits. The first one was g2g, but the second one had a defective selector switch. However, CMMG quickly sent me a new part free of charge. But if I were to build a new lower now, I would get...
$51.xx plus $3.xx shipping elsewhere .. Wasn't this item here over $60 shipped until slick members pointed out it wasn't the best deal from multiple stores?
Is this kit new or used?
Will this work for the "large" guys? You know, with a belly?
We have lots of feedback from very large guys who absolutely love the holster The only issue we’ve found is with guys who have a large lower belly will have trouble concealing up front…and so prefer to wear the...
Thanks Joe for the fast answer and the honest one. because of that I will buy it. so where do I go to place my order?
My pleasure You can order them from our website www 3speedholster com The current turnaround time is always posted just before the order form Always best to contact us there too that way you're sure to get the...
Have this on a poly80 g17 build works great
OUT OF STOCK
Sorry about that. I was editing the product listing to account for the short leg style I have one these now. Both styles are in stock.
Thanks for the quick update.
Just ordered one of each. Free shipping to Texas and no tax.
Just a heads up. The worldpay payment processing page on this site is trying to charge me more than my total price.
Can you DM me what it was trying to charge so I can follow up with them? We only charge sales tax in FL. That should be the only variation on the price you see there.
It wasn’t showing the tax on the checkout page when I had this issue last night but it works fine now. Thank you for clearing that up.
Just got mine and it’s pretty much a Radian Raptor (the version with the plastic handle, the LT I think) for 1/3 the price. Great deal.
so the standard ext handle that was cut to make two little arms unfortunately I can see this snagging on ... well everything.
Featureless buttstock?? Nah nah hell nah. I like me some BIG features.
These pins ain’t made for walkin.....so that’s what they won’t do
This spring is typically sells for around $7.00. 3CR includes shipping but it’s still no deal.
Are these simply anti-walk pins or anti-rotation pins? Need some for a 9mm build but trying to avoid spending $30 for some kns ones
Lol! Good one.
Seriously.. do those tiny comps on a tiny barrel make any difference? Lol seems stoopid.
The reviews I have gotten are positive for reducing muzzle rise FWIW I've also experienced a difference myself We have some reviews up on the comps on our site and on reddit that are all positive The price point on...
I don't own this exact comp but I use a HK micro comp on my canik combat elite and I'd say it definitely helps with the muzzle flip You're not shooting rifle cartridges out of them it's 9mm don't need huge holes for...
Out of stock
does this come with a trigger kit as well? It states that it comes with all major parts, but the trigger pieces are not shown or specifically mentioned.
Internal part kits would be needed to complete a functional pistol. You'll need the lower parts kit and slide kit.
Just ordered one for my G17.Lets see how it goes.I did notice that they have a few others on the site for less, but once you go to it the price jumps!
The lower price shown is because they are discounted 10% each when bought together in the combo.
Great price. Includes both shipping & taxes. Can't beat it right now.
Will this cowitness with factory sights on a scorpion
About $200 cheaper than I can find elsewhere for a full kit.
Ordered a comp for my G23 from these guys.Fast shipping and great item.Good Job Guys!
I think the designer’s 1st motivation was bypassing patents & trademarks, not improving form & function.
ordered mine for my G17.Well made and good quality.It does give a little bit of comp, easier to get back on target with this comp.
If I could build it myself why the F would I pay you guys 300 bones? And why would I waste my time building a Gluck anyways?
Posted this ad on the off chance that some people may think differently.
Well don’t hold your breath as they say
The standard black nitride slide has sold out. Should have more of those back in stock in a bit.
These are both, anti walk and anti rotation.
5% coupon code works.
I have one of these slides a it functions flawlessly and all machine work is clean and to specs. Worth the money IMHO
I wonder if anyone ever starts with a drill jig like this and then finishes the lower with a router type jig? I would think drilling first then using a router, you would get done quicker then only using router jig and...
most of the router jig models have you doing a lot of drilling first I prefer just a pilot hole because multiple pockets can cause a hand router to jump when you're moving between holes If you were on a mill it...
Look bro, only $13.99 !!
I'd get this if it were a G17 slide. About what you'd pay for a used complete slide, if you could find one.
Is there any chance this is made in America?
It is not, but I've been dealing with this supplier for a bit now and their products are a cut above what you'd normally find from the Chinese mass produced market.
TY
Good deal on the LPK bundled with it!! Anodized, 6061, billet, everything I was looking for. Thanks for posting.
Parts are sold out
Some of the uppers are OOS till later this week, but there are quite a few combinations still in stock.
All the build kits only display 1 barrel, is there a way to swap out? Or preorder?
Not at this time as components are hit-or-miss on supply. We get these uppers already pre-built and tested. We did have variants with heavy barrels but those haven't been back in stock for a bit. If you're looking for a...
Gen 5?
it says "Compatible with Polymer80 PF940SC", Polymer80 PF940SC is for Gen 3
Didn’t know that, thank you
after a bit of research, it seems G26 gen 3 and gen 4 use the same slide.
Sold out
Guess your mom needs to practice her aim a bit
Anyone know the quality of this slide?
4140
Thanks for posting this.
How much work to polish a raw stainless slide to chrome like finish?
Uhm... 5 minutes, a Dremel, and some polishing compound? But if you couldn't YouTube or Google that answer maybe a diy gun isn't for you?
Solid parts company. Handles any concerns if things should arise. Little sluggish in shipping times wtfever these days right. Super happy with slides from them.
Cause you suck
I hope you choke on yours
Any other gold parts?
$5 40 routing protection is not "free shipping" Pop up claims 5% discount for 1st order (no discount for this item as stated) but the rest of my order was $139 99 and the 5% discount showed $2 95 Plus with the rest...
The route protection is auto-added to every order, but is an option that you can decline in the cart. The coupon codes also do not apply to certain items that are already discounted.
You're right. Route protection options did show up at the very end. (I went back). I never got that far the first time because in the "view cart" and at the beginning of check out there was no way to drop the $9.45 so I...
So if I buy this and this:
No. You need a "particular set of skills".
no you need a lower parts kit to complete the build Also need to make sure you can even have one of these 80% in your state You'll need a drill and a dremel Also an extra power recoil spring if you get this kit I have...
Deal says build a complete Glock slide for $185.88 when you go to the site you cannot build it for that cheap.
Slide - $104.49 Barrel - $39.59 Parts Kit - $41.80 No Iron Sights - $0.00 ----------------------------------- Total - $185.88
No iron sights. It is not a "complete" slide without sights. It even has the sights in the photo of the ad, to exclude them from the "complete" build makes no sense.
It'll still shoot. Just aim by faith
I literally just built one of these yesterday and here's my experience Overall the fabrication was easy Pretty much the same thing as the Polymer 80 The jig isn't bad and does its purpose Another plus is that it...
great help very descriptive mr pro. i was wondering about the p80 vs this and jig results
bought stuff from them when i was skeptic of 80% stuff, parts were from taiwan and the guide rod broke after maybe 600 rounds
i think my account also went missing when i spoke up about it
Our Glock compatible parts kits are sourced from US companies that make their own components Plastics are outsourced Same suppliers for 5+ years that also supply kits for other retailers on here We don't disable or...
Just completed this + Polymer 80 frame; after the usual fitting, runs flawless and accurate. No need to buy OEM (expensive) parts, just take your time and pay attention to detail.
I just paired a 3CR slide barrel with a polymer 80 frame with great results Very reliable and accurate much like a Glock (for about half the cost and no FFL) You don’t need OEM just take your time and pay...
Any reviews on these reloads? Pretty decent price by the looks of it, but not sure if I want to pull the trigger...
I wish they would list shipping without going through the cart....Not sure if this site is like this, but some have made me register to see shipping....PITA. Will report back.
Shipping $24.46 for 500, 42.77 per 1000 via Fedex ground to PA
Boom dada boom....he's here all week folks!
They do it for a reason lol.. I doubt many people would buy ammo from 'em if it said in a big banner at the top of the page "$42 shipping!!!" :)
with shipping to my zip code. each round comes out to be $.32 a piece, cheaper than what I can find locally including tax.
Still the best price on the web for brass casing in a long time. Everyone else seems to be out of stock.
from $277 to $304, this is ridiculous for reloads...
Is it still available? Would like to get it...
Tactical Jackets
They were 100+ available 5 minutes ago, now 1 available
Was able to grab them just in time. After my order I saw it go to 5 then 3 then 1 in seconds.
STILL AVAILABLE https://www.44mag.com/product/m1a_m14_magazines_25/check-mate_industries...
Hurry!! only 35 Available now
So pissed!! Saw notification in my mailbox that they were back in stock Clicked on link and they still had them Then researched about the "unassembled parts options" as I'm from NJ Wanted to make sure it was a...
I called S&W about my back-order today and got the automated lady telling me that they have no idea when they will be delivered from the manufacture. I'm thinking to myself....aren't you guys making these mags?... I have...
Phoey!! Just check Cabela's but no luck Not even listed Thanks for the tip though I was lucky to pickup the rifle deal a few weeks back for $511 Hopefully my FFL will have the mods ready for pickup next weekend...
I just found this sale and ordered three of them This is the best price I've found on these Black Dog magazines They have smoke and black ones Stainless ($13 50) and plastic feed lips ($11) $5 priority 2 day shipping...
This is the best price I've found on these Black Dog magazines. They have smoke and black ones. Stainless ($13.50) and plastic feed lips ($11). $5 priority 2 day shipping...
Thanks
A good deal only if you’re really small or really large as those are the only sizes they have.
Why is this reposted daily? Not much of a deal when they are sold out of sizes 31 through 40.
The price is not even true its $79 with $20 off nice try
If you click the color "storm" it's $35.99, the rest are either sold out or not reduced. So it would be $26.99 after you go to check out.
I indeed go to check out and even though I already see the "place order" button, it is still $35.99 for storm. No deal.
I need to get one.
buy it anyway.
If you have a local 5.11 store, check them out and see if they have a sale on these. I was able to pick up a pair of the slim burnt color for just over $25.
I love mine. Thinking about getting a 2nd pair.
Tactical skinny jeans?
No thanks; I am heterosexual.
These aren't skinny jeans.
Those are definitely skinny pants.
Go Google Bing images "skinny jeans" and then "slim jeans" "Slim" and "Skinny" are two separate industry fitments as it pertains to pants Slim fit pants have greater leg diameter than skinny jeans Skinny jeans are...
"Tactical skinny jeans?
No thanks; I am heterosexual."
LOL, only a fat retard would call those skinny jeans.
Martyr_Machine wears huskies and has a gunt (gut+cunt).
I know, right?
They are high quality, well made pants. I really like mine.
I like my pair a lot. They seem very durable, fit well, and the magazine pockets are pretty handy to have I am at the range.
Not sure this deal is actually at. Cause I can’t find it. Or the color and price Anyone have a link directly to it ?
https://www.511tactical.com/defender-flex-slim-6.html?utm_source=62182&utm_medium=affiliate&clickId=2631022528...
I’m with you, these look like some hipster crap. Look at the picture they use on here even looks like some city boy bs.
"Tactical storage for your laptop...letting you go from nondescript to armed and overt in seconds."
"Accommodates a G36C submachine gun" < Who has one of these?
Only offered in extra-small waist size.
If you think these are skinny jeans you’re fuckin old. Buy a pair. You can irritate fudds by wearing pants that fit. Martyr_Machine stop worrying about what other dudes are wearing. That’s big ghey.
whatever you’re comfortable in at the bar while you and your boyfriend are grinding on each other, none of my business....
I am not gay and my I'm physically fit so I don't have a gunt to bust open normal healthy adult male clothing You sound like a deeply butt hurt fat psuedo man Serious question: Do you get angry when you go to the...
Form fitting but practical clothing makes fat old retards self conscious about their FUPA and inability to do more than three pull ups Martyr_Machine is probably a closeted gay man you feels the need to obnoxiously...
I’ve got two pair of each. The oil green looks black unless in sunlight or very bright light. The burnt is like a dark khaki. Wear both at work, shooting and hunting. Been able to clean blood, grease, and grime without...
SALE25 discount code not working for me, no deal
I ordered these before I read the reviews and I'm glad I did I'm a geezer pushing 50 5' 10" 240 pounds with some muscle buried under the flab The last thing I wanted was weird looking hipster pants And that's...
James from TFB says YES to tactical shorts.
Photo looks like the kind of poser who wears 5.11 at the range. Raised Jeep with offroad package to boot....never driven on grass through.
Lmao isn’t that Rudy Reyes
And he brought his raft just in case. JUST IN CASE.
That guy is a combat vet.
Just maybe the props are provided for the model who btw is Marine Recon and can fold you up and put you in his back pocket.
Dude relax it’s not that guy. That guy is ripped rock solid this model is not. Relax take a Xanax or something
And I Bet he wouldn’t be caught dead in this stuff
Google is your friend or should be since you're telling others to relax when you're completely clueless The dude even posted a picture of himself wearing a 5 11 kilt on Instagram at some point They've obviously had...
Ok bro sounds like a full blown man crush now. Don’t relax then call him if you’re so interested. Google is for chumps and instagram is for even bigger chumps. Talking about what a man posted wearing on instagram??!!...
Yep It's Fruity Rudy Reyes Looking for "Precious" at the Taran (HedgeHog) Tactical Pre Teen "Gun Bunny Ranch " ; ) Oh and 5 11 Tactical? please take this ad down nobody is going to buy this " Back to the Future"...
It’s Fruity Rudy from 1st Recon
He's on a mission...... to find a Tall, Non-Fat Latte With Caramel Drizzle and soy cream (or man cream?)
He's looking for the precious.
Joel from the 1st the last of us game?
This tactical fanny pack works well with my tactical white socks and tactical open toed sandals along with my tactical Bermuda shorts and tactical bowling shirt.
Gotta have something to go along with your aloha shirt for the big luau.
*BOOGALOO!
Master duffle? What kind of racism is this??? Ok internet trolls have fun!
Just imagine, saying 'master bedroom' is now racist. I guess it has to be called 'equal opportunity bedroom' or some other such shite.
I wish you could hook us little guys up with some 28x30 I can't eat enough cheeseburgers to get into a larger size and extending my shins isn't an option for them 36" length version I love your pants I just need...
Seriously, us 30/32 waisters need some love too.
Slim pants seriously?
And you little waisters quit rubbing it in us real mens (36” and proud) Faces. Your skinny thank Jebus for that bruh.
Go try a pair and you'll understand the appeal. They arent wrangler tight or anything. The price is good enough and you can always send them back if you don't like them.
When did this site become Kohls?
Giving me a giggle all the fat a**es that are wrapping their self esteem and masculinity up in the fact that they cant fit in a normal pair of jeans that are tapered from the knee Pro tip If all you can fit in is...
Skinny Jean's for pigs and civilian "cool guys" lol
Only fat sizes are left now
The shorter your inseam, the shorter your draw time.
As with virtually all 5.11 stuff posted here, if you are a normal sized person, forget it. The available sizes are for Ethiopians or obese people.
If your calves and thighs are the same diameter...you shouldn't be commenting on physical prowess or manliness.
Haha
MissionCritical is too hip to purchase mainstream jeans.
Frustrating to always see this deal come up but never sizes that fit people in the healthy BMI category < p>
As someone in the comments mentioned there are places to get these locally in most states For the...
These sizes are perfect for the boogaloo, but way too big for me.
This is a gun website not JC Penny's.
Does it make me as rugged as the man in the picture?
Bought a pair last fall. Blew a 1" hole in the side of them just working about my yard in two months. Not impressed, would not buy again, or recommend.
Blew a 1" hole in the side of them just working about my yard in two months. Bought after tfb tv review. Don't waste you money unless you plan to strictly walk in them.
I have this in the 4 Banger variant and they are very nice bags that are built well It screams tacticool so not really for those folks going for a low profile or grey man approach Fits PMAG M2 30 rounders but just...
Dude literally has enough vascular hydraulic pressure to operate a downed bulldozer He honest to god doesn't go out to donate blood he just pokes a needle into his arm and launches it the 6 blocks into a bucket at...
lmao is the guy doing crossfit in the photo? how do people really drop $90 on crap like this
Because they don’t have to pay for underwear.
Soooooo yeah. I actually registered on this site to make this comment if that's any indication of how serious I am right now. Guys .... I suck dick (as gay people are keen to do), and this is, without a doubt, THE gayest...
American men who wear kilts make me roll my eyes especially when they say it's their "heritage" or some such crap when actual Scotsmen are wearing pants like normal people I'm sorry your parents didn't pay enough...
Ordered me a pair, for $40 how bad can they be? 5.11 always makes good shit in my opinion.
The fact that you're so insecure that you have to make an unsolicited comment like this just to get attention isn't just stupid, it's pathetic.
Looks like timberland fucked a sneaker
10% off code - one time use - report when used
BX-SNSLUFWL
You're a legend! Thank you!
I love the way these shoes look and have great soles. BUT! They are impossible to get on and off and like one other commenter said I dont think they will hold up very well.
Totally agree. They do look great, but are a pain to get on and off.
How do you like your kilt?
While I would never in a thousand years buy this stupid *tactical* kilt I AM Scottish. I am required to wear one to some clan functions and it has to be in my hereditary tartan colors. I am also American, born and raised...
Thorax - America is aprox 250 years old while other countries are thousands years old, how is it possible that we became the most prosperous - richest - most powerful, most generous nation on the planet in that amount of...
Junk... had a blowout after a few months of yard work.
Look man, if you want to wear a skirt because of your "heritage", be my guest. I'm still gonna make fun of you, though. Enjoy your "clan functions", which sound totally normal and not at all silly events attened by fat,...
I did say 'evolve'. Is that too large of a word for your 6th grade education ?
@thorax Have you even been overseas? People love Americans The only ones that looks down are the ones that are scared and for good reason I don't even think you own guns I think you're some antivag snowflake who...
I've got a feeling that this will be the gun.deals version of the sugar-free gummy bears reviews on Amazon. #subscribed
I looked into these comments for the comedy value which I expected when I saw this ridiculous item It didn't disappoint That said i'd be tempted to get this solely for Halloween i e concoct some sort of Scottish...
damn vrock. U the type of dude to say really ignorant racist crap and then try to say you're not ignorant or racist.. you just ripped on a whole culture you clearly don't know anything about. And when an actual Scottish...
He tried to wear a skirt for his butt buddy and his butt buddy didn't like the whole hairy leg thing going on. He's not so secure about his sexuality these days.....or his cross dressing choices. He inwardly still thinks...
1213 - That kinda sounds like some other troll in this place other then Thorax - @ least Thorax isn’t a huge AH like the other one… lol lol
This deal should include a free pair of tactical panties.
I live rent free in your head, I see.
It's been a long time since I read "On the Origins of Species", but I'm pretty sure there's nothing in there about wearing a skirt. Your idea of celebrating your "Scottish heritage" sounds like a LARP event. My ancestors...
Yeah but see, it looks like a skirt.
But it's fun to make fun of guys who wear skirts.
Projection is a dangerous game