223/5.56 Rifle Deals

(2,416 deals total)

Sierra 316 Features This rifle has a 16" mid-length heavy barrel with 1x9 twist, Magpul® MOE Black stock, Magpul® MOE Black handguards, Magpul® MOE Black Grip and A2 flash hider. The rifle also comes with 1 x 30rd PMag and a CA approved Gun Lock. Shipped with a Chamber Safety Tool in the chamber, showing clearly the weapon is unloaded.

Superlight SRC Features Windham Weaponry's .223 Superlight SRC Semi-automatic rifle features a 16" barrel (1:9 right hand twist) with Melonite QPQ finish, an A2 flash suppressor, a six position stock and manual safety lever with indicator markings on both sides of receiver. The receiver is forged aluminum and has a hardcoat black anodized finish. There are no rear or front sights but comes ready for optics or other type of accessory sights. Includes one 30-round magazine.

CMMG® Resolute Mk4 Semi-automatic 5.56 NATO/.223 Rem. AR-15 Rifle When full-size rifles are too cumbersome and pistols/SBRs don’t deliver the long-range ballistic performance you need, the CMMG Resolute Carbine is the answer. The Resolute MK4 is CMMG's top-of-the-line Carbine, and comes with premium components across the board. It features CMMG's own RipStock, which features FastBack technology for rapid deployment: just pull it straight back to deploy it. There are no locking tabs to bind, and an indexing screw lets you pre-set your desired length.

The legendary FN SCAR® is upgraded with Non-Reciprocating Charging Handles. Available in MultiCam® as a special makeup. Adaptable: New, non-reciprocating, dual charging handles allow you to shoot from any position without interfering with optics or grip. Reliable: Short-stroke gas piston system with an adjustable low-flash gas regulator. The reduced reciprocating mass of the new bolt carrier produces less felt recoil. Accurate: Fully free-floating, cold hammer-forged, chrome-lined barrel and one-piece machined aluminum upper.

RADIAN WEAPONS R0536 Model 1 Carbine 223 Wylde 14.50" 30+1 Radian OD Green Cerakote Black Magpul Collapsible Magpul - The Model 1 features fully ambidextrous controls, adding much-needed utility for both left and right handed shooters. Every Model 1 is assembled by hand, one at a time, by a trained gunsmith who inspects, test fires and cleans the weapon to guarantee it meets the most rigid quality standards.

The savage 110 lightweight hunter XP comes with a hardwood stock that accepts detachable box magazines and a black oxide finished carbon steel 20″ barrel and receiver. The accutrigger is user adjustable from 2.5-6lbs. It also includes a bushnell 4-12x40mm scope. Specifications: Caliber: 223 Rem Model: 110 Series: Lightweight Hunter XP Stock Finish: Hardwood Action: Bolt Barrel Length: 20″ Scope: Bushnell 4-12×40 Capacity: 4+1 Size: Full Size Application: Field Hand: Right Max Capacity: 4 Receiver Finish: Black Oxide

Action Type : Semi-Auto Barrel Length : 18.00 Cartridge : 5.56x45 NATO Cartridge Capacity : 30 Color : Flat Dark Earth Finish : Matte Front Sight Type : None Item Length (Inches) : 38.500 Item Weight (lbs) : 7.000 Magazine Capacity : 30 Magazine Included : Yes Magazine Quantity : 1 Magazine Type : Removable Make Model Fit : Stag Arms.Stag 15 Muzzle : Flash Hider Rear Sight Type : None Stock Material : Polymer Brownells sku: 100041590 MPN#: STAG15003422

Diamondback Firearms are made entirely in the USA. Features include a melonite coated, 4140 chrome-moly, free-float barrel. It also has a forged 7075 T6 aluminum lower along with an A3 flattop upper receiver, no sights, and a carbine length gas system. This model has an A2 flash hider, 6-position ATI Mil-Spec buttstock and buffer tube, A2 pistol grip, and a Diamondback aluminum 10" handguard. Diamondback DB15 Version 2 AR 15 Specifications Brand: Diamondback Category: Tactical Rifles Gun Platform: AR-Style Caliber: 5.56x45mm NATO Model: DB15 Series: Version 2

Forged AR Features The Radical Firearms 16" SOCOM 5.56mm AR rifle uses MIL-STD Upper and lower receivers along with our 15" RPR free float rail system for increased accuracy, keeping your hands cool, and giving you plenty of room for accessories. Regardless if it’s your first or fiftieth, a Radical Firearms AR rifle will not disappoint!

The BATTLEARMS WORKHORSE series of firearms are built for duty and hard use in mind. It is purpose-built around the forged WORKHORSE 7075-T6 aircraft-grade aluminum receiver and free-float rail handguard with M-LOK attachment point at 3, 6, and 9 o’clock positions. At 12 o’clock is a full-length Picatinny accessory rail with our signature notch cut matching the upper receiver. Every firearm is equipped with a 4150 chrome-moly steel black nitride barrel for durability and accuracy.

The iconic bullpup-style Steyr AUG has been one of the most recognizable rifles in the world since its adoption by the Austrian army in 1977 and is now available for civilian use as the Steyr AUG A3 M1. The short-stroke gas-piston operation of the AUG runs exceptionally cleaner by nature because all of the operational exhaust gas vents out of the front of the rifle. The AUG A3 M1 has all the classic features and benefits that established it as the pinnacle of modern rifle design.

SKU 516551628540 Brand Palmetto State Armory DETAILS Long Stroke Gas Piston Operating System 8620 Front Trunnion 4340 Carrier 7 Lug Shot Peened Carpenter 158 Bolt Monolithic 6105 Receiver; Hard Coat Anodized 13.7” 5.56 Nato Nitride 4150V Chrome Moly Steel Barrel Twist Rate: 1 in 7” Thread Pitch: 1/2x28" JMAC Customs GFHCE-28-S-KM Muzzle Device Pin & Weld JMAC Customs Skeleton 8" Stock with Integrated Rubber Butt Pad Magpul 30rd PMAG (1) **Suppressor Mount will not work with Dead Air Nomad and some SilencerCo Suppressors FEATURES

Built upon the same principles as Eugene Stoner's original design, we use the basic receivers as the CORE of our AR-15 style rifles, and then expand upon that design by incorporating the many benefits of today's accessories into our rifles. We hold each and every receiver to exacting tolerances using state of the art machining processes.

MODEL : ULTRALIGHT HUNTER Buy the Wilson Combat Ultralight Hunter Rifle from BattleHawk Armory! The Ultralight Hunter series of rifles by Wilson Combat combines our slick side Mil-Spec Forged receiver set, a Smoke Composites Carbon Fiber Stock, and our Ultralight Hunter profile match-grade, tapered and threaded barrel to create a fast-handling precision AR carbine that is an ideal hunting carbine where the ultimate lightweight stalking rifle is a prerequisite for success.

UPPER RECEIVER: AR-15 Mil-Spec LEFT HANDED Machined out of Billet Aluminum, M4 Feed Ramps, Type III Hardcoat Anodized Black BARREL: 13.7 inch, 5.56 NATO Caliber, 4150 Chrome Moly Vanadium Steel, 1:7 Twist, Medium Profile, Nitride/Melonite Treated - made by Ballistic Advantage HANDGUARD: 15 inch M-LOK Free Floated, Machined out of 6061 T6 Aluminum – made for us by Bowden Tactical GAS SYSTEM: Mid Length, Direct Impingement, Stainless Steel Tube GAS BLOCK: Low Profile Gas Block, Machined out of 4140 Steel MUZZLE DEVICE: Standard 1/2-28 Slimline Flash Can - Pinned & Welded

51655140266 PRODUCT DETAILS DETAILS Long Stroke Gas Piston Operating System 8620 Front Trunnion 4340 Carrier 7 Lug Shot Peened Carpenter 158 Bolt Monolithic 6105 Rifle-Length Receiver Rifle-Length Handguard 13.7” 5.56 Nato Nitride 4150V Chrome Moly Steel Barrel Twist Rate: 1 in 7” Thread Pitch: 1/2x28" JMAC Customs GFHCE-28-S-KM Muzzle Device Pin & Weld F5 MFG Modular Stock System (MSS) For PSA JAKL, Black Magpul MOE SL Grip, Black Black Hardcoat Anodize Finish Black Knurled Charging Magpul 30rd PMAG (1)

SKU 516551628521 Brand Palmetto State Armory DETAILS Long Stroke Gas Piston Operating System 8620 Front Trunnion 4340 Carrier 7 Lug Shot Peened Carpenter 158 Bolt Monolithic 6105 Receiver; Hard Coat Anodized 13.7” 5.56 Nato Nitride 4150V Chrome Moly Steel Barrel Twist Rate: 1 in 7” Thread Pitch: 1/2x28" JMAC Customs GFHCE-28-S-KM Muzzle Device Pin & Weld JMAC Customs Skeleton 8" Stock with Integrated Rubber Butt Pad Flat Dark Earth Cerakote Finish Magpul 30rd PMAG (1) **Suppressor Mount will not work with Dead Air Nomad and some SilencerCo Suppressors FEATURES

516551628520 PRODUCT DETAILS DETAILS Long Stroke Gas Piston Operating System 8620 Front Trunnion 4340 Carrier 7 Lug Shot Peened Carpenter 158 Bolt Monolithic 6105 Receiver; Hard Coat Anodized 13.7” 5.56 Nato Nitride 4150V Chrome Moly Steel Barrel Twist Rate: 1 in 7” Thread Pitch: 1/2x28" JMAC Customs GFHCE-28-S-KM Muzzle Device Pin & Weld JMAC Customs Skeleton 8" Stock with Integrated Rubber Butt Pad Olive Drab Green Cerakote Finish Magpul 30rd PMAG (1) **Suppressor Mount will not work with Dead Air Nomad and some SilencerCo Suppressors FEATURES

The Radical Firearms 16" 5.56 Range Ready Kit comes with everything you need to get to the range right out of the box! This kit comes with our new 16" Skinny Hybrid Rifle, a Primary arms SLx advanced Push Button Micro Red Dot Sight- GEN II (with Mount), Savior Equipment 36" rifle case, 2-30 round magazines, Magpul M-LOK QD Sling Mount, Magpul MS4 QDM Sling and a Magpul MVG MOE Vertical Grip. This package makes a great Holiday gift for any family member that's into outdoor shooting sports! UPC: 814034027779 MFR#: RF01713r Barrel Length: 16" Barrel Material: 4140 Chrome Moly Vanadium

Diamondback Firearms DB15, Semi-automatic Rifle, AR, 223 Remington/556NATO, 1:8, Medium Contour, 4150 CrMov, 16" FDE Cerakoted Barrel, Mid-Length Gas System, Mil Spec OD Green Finish With FDE Furniture, 6 Position Stock, 30 Rounds, 15" MLOK Handguard With Anti-Slip Texture Pads, 1 Magazine, Magpul FDE MBUS Sights, Shot-Peened BCG With Laser Logo, Enhanced Trigger Guard, Magpul MOE-K2 FDE Grip, Magpul FDE CTR Stock DB171AK192

The Lantac LA-SF15 .223 Wylde 16" Barreled Recon Rifle is manufactured to the highest quality standards and assembled by a skilled team of builders. The LA-SF15 delivers exceptional performance out of the box without the need for any modifications or upgrades. The Lantac LA-SF15 is manufactured using Lantac’s enhanced forged receiver sets that feature an internally flared magwell to assist in 'high stress' reloading, a radiused cam pin recess and patented CP-R360 Domed Head Cam Pin fitted to the E-BCG (Enhanced Bolt Carrier Group) that reduces wear and friction.

The Zastava USA PAP M90 is a semi auto AK style rifle chambered for 5.56 NATO. Features include an 18.25" barrel, red wood furniture, an AK slant style muzzle device, adjustable sights, manual safety, and a 30 round magazine. ZASTAVA USA PAP M90 FEATURES

UPPER RECEIVER: Gibbz Arms G4 LEFT HANDED Non Reciprocating Side Charging Billet Aluminum Receiver with Gen 2 Handle, M4 Feed Ramps, Type III Hardcoat Anodized Black BARREL: 22 inch, 223 Wylde Caliber (shoots 223/5.56), 416R Stainless Steel, 1:7 Twist, Medium Profile, Bead Blasted Premium Finish - made for us by Tactical Kinetics HANDGUARD: 15 inch M-LOK Free Floated, Machined out of 6061 T6 Aluminum – made for us by Axis MFG, Cerakoted Magpul Flat Dark Earth (FDE) GAS SYSTEM: Rifle Length, Direct Impingement, Stainless Steel Tube

5.56 NATO (accepts .223 Rem) 30+1 Round Capacity 16″ 4140 Steel Barrel Black Melonite Finish 1:7 Twist 1/2-28 Threaded Barrel with A2 Flash Hider Mid-Length Gas System SOCOM Barrel Profile .750″ Low Profile Gas Block M4 Feed Ramps Forged 7075-T6 Aluminum Lower Receiver Forged 7075-T6 Aluminum Flat Top Upper Receiver 15″ RPR Free Float Rail System Handguard CAR Adjustable Stock Mil-Spec Trigger Black Type III Anodized Finish

The advantage of the CR6940 is unmatched. The CR6940 displays fresh ingenuity with Mil-Spec hammer and trigger pivot pins, a Magpul MBUS iron sight and a folding front sight for enhanced optical solutions, a straight gas tube and a removable lower rail which provides modularity for under mounting accessories. The patented one-piece monolithic upper receiver incorporates a continuous Mil-Spec rail from the rear of the upper receiver to the front sight. This feature affords unmatched repeatability for mounting optical systems, not found with separate handguard rail systems.

516551628705 DETAILS Long Stroke Gas Piston Operating System 8620 Front Trunnion 4340 Carrier 7 Lug Shot Peened Carpenter 158 Bolt Monolithic 6105 Receiver; Hard Coat Anodized 13.7” 5.56 Nato Nitride 4150V Chrome Moly Steel Barrel Twist Rate: 1 in 7” Thread Pitch: 1/2x28" JMAC Customs GFHCE-28-S-KM Muzzle Device Pin & Weld JMAC ST-6 Skeletonized Tube With Folding Mount B5 Systems Bravo Stock, FDE B5 Systems Grip, FDE Flat Dark Earth Cerakote Finish Magpul 30rd PMAG (1)

516551628710 PRODUCT DETAILS DETAILS Long Stroke Gas Piston Operating System 8620 Front Trunnion 4340 Carrier 7 Lug Shot Peened Carpenter 158 Bolt Monolithic 6105 Receiver; Hard Coat Anodized 13.7” 5.56 Nato Nitride 4150V Chrome Moly Steel Barrel Twist Rate: 1 in 7” Thread Pitch: 1/2x28" JMAC Customs GFHCE-28-S-KM Muzzle Device Pin & Weld JMAC ST-6 Skeletonized Tube With Folding Mount Magpul SL Carbine Stock, Black Magpul MOE SL Grip, Black Black Finish Magpul 30rd PMAG (1)

516551628708 DETAILS Long Stroke Gas Piston Operating System 8620 Front Trunnion 4340 Carrier 7 Lug Shot Peened Carpenter 158 Bolt Monolithic 6105 Receiver; Hard Coat Anodized 13.7” 5.56 Nato Nitride 4150V Chrome Moly Steel Barrel Twist Rate: 1 in 7” Thread Pitch: 1/2x28" JMAC Customs GFHCE-28-S-KM Muzzle Device Pin & Weld JMAC ST-6 Skeletonized Tube With Folding Mount Magpul SL Carbine Stock, ODG Magpul MOE SL Grip, ODG Olive Drab Green Cerakote Finish Magpul 30rd PMAG (1)

516551628706 DETAILS Long Stroke Gas Piston Operating System 8620 Front Trunnion 4340 Carrier 7 Lug Shot Peened Carpenter 158 Bolt Monolithic 6105 Receiver; Hard Coat Anodized 13.7” 5.56 Nato Nitride 4150V Chrome Moly Steel Barrel Twist Rate: 1 in 7” Thread Pitch: 1/2x28" JMAC Customs GFHCE-28-S-KM Muzzle Device Pin & Weld JMAC ST-6 Skeletonized Tube With Folding Mount B5 Systems Bravo Stock, Black B5 Systems Grip, Black Black Hard Coat Anodizing Magpul 30rd PMAG (1)

516551628707 DETAILS Long Stroke Gas Piston Operating System 8620 Front Trunnion 4340 Carrier 7 Lug Shot Peened Carpenter 158 Bolt Monolithic 6105 Receiver; Hard Coat Anodized 13.7” 5.56 Nato Nitride 4150V Chrome Moly Steel Barrel Twist Rate: 1 in 7” Thread Pitch: 1/2x28" JMAC Customs GFHCE-28-S-KM Muzzle Device Pin & Weld JMAC ST-6 Skeletonized Tube With Folding Mount Magpul SL Carbine Stock, Black Magpul MOE SL Grip, Black Smoke Cerakote Finish Magpul 30rd PMAG (1)

516551628704 DETAILS Long Stroke Gas Piston Operating System 8620 Front Trunnion 4340 Carrier 7 Lug Shot Peened Carpenter 158 Bolt Monolithic 6105 Receiver; Hard Coat Anodized 13.7” 5.56 Nato Nitride 4150V Chrome Moly Steel Barrel Twist Rate: 1 in 7” Thread Pitch: 1/2x28" JMAC Customs GFHCE-28-S-KM Muzzle Device Pin & Weld JMAC ST-6 Skeletonized Tube With Folding Mount B5 Systems Bravo Stock, ODG B5 Systems Grip, ODG Cerakote Olive Drab Green Magpul 30rd PMAG (1)

516551628703 DETAILS Long Stroke Gas Piston Operating System 8620 Front Trunnion 4340 Carrier 7 Lug Shot Peened Carpenter 158 Bolt Monolithic 6105 Receiver; Hard Coat Anodized 13.7” 5.56 Nato Nitride 4150V Chrome Moly Steel Barrel Twist Rate: 1 in 7” Thread Pitch: 1/2x28" JMAC Customs GFHCE-28-S-KM Muzzle Device Pin & Weld JMAC ST-6 Skeletonized Tube With Folding Mount B5 Systems Bravo Stock, Black B5 Systems Grip, Black Cerakote Smoke Magpul 30rd PMAG (1) **Suppressor Mount will not work with Dead Air Nomad and some SilencerCo Suppressors

516551628519 DETAILS Long Stroke Gas Piston Operating System 8620 Front Trunnion 4340 Carrier 7 Lug Shot Peened Carpenter 158 Bolt Monolithic 6105 Receiver; Hard Coat Anodized 13.7” 5.56 Nato Nitride 4150V Chrome Moly Steel Barrel Twist Rate: 1 in 7” Thread Pitch: 1/2x28" JMAC Customs GFHCE-28-S-KM Muzzle Device Pin & Weld JMAC Customs Skeleton 8" Stock with Integrated Rubber Butt Pad Smoke Cerakote Finish Magpul 30rd PMAG (1) **Suppressor Mount will not work with Dead Air Nomad and some SilencerCo Suppressors FEATURES

Crusader Arms Templar 16" Piston NRCH 5.56 Monolithic Upper 30+1

The M&P15 rifle line is Smith & Wesson's version of the popular semi-automatic AR-15 rifle. These rugged, lightweight rifles are built to perform flawlessly under varied conditions. As tough as it is effective, the M&P15 comes standard with a chrome-lined 16-inch barrel, bolt carrier and gas key. Available on select models, the six-position adjustable stock easily accommodates various shooting positions and user build. Specifications and features: S&W M&P15VTAC Viking Tactics rifle .223 Remington/5.56x45mm NATO 16" 4140 steel barrel 1:7" twist with 6 grooves & lands

The Del-Ton Echo 316 showcases an array of exceptional features designed to deliver a superior shooting experience. The 16" barrel has an M4 profile and a 1x9 twist, enabling consistent and accurate shots. The rifle comes with a 6 position M4 stock, allowing for a personalized fit for individual shooters.

UPPER RECEIVER: AR-15 Mil-Spec Machined out of 7075-T6 Forged Aluminum, M4 Feed Ramps, Cerakoted Magpul Stealth Gray Color with Forward Assist and Ejection Port Cover Installed BARREL: 14.5 inch, 5.56 NATO Caliber, 4150 Chrome Moly Vanadium Steel, 1:7 Twist, Medium Profile, Nitride/Melonite Treated - made for us by Tactical Kinetics HANDGUARD: 12 inch M-LOK Free Floated, Machined out of 6061 T6 Aluminum – made for us by Axis MFG - Cerakoted Magpul Stealth Gray Color GAS SYSTEM: Carbine Length, Direct Impingement, Stainless Steel Tube

Redefining perceptions of semi-automatic 5.56 performance, the new Hellion from Springfield Armory represents a radically unique and innovative approach to firearms design. Featuring a bullpup configuration where the action is located behind the trigger, the Hellion features an overall length of just 28.25-inches while still possessing a 16" barrel. The Hellion sports ambidextrous controls that work in concert with a reversible case ejection system, allowing it to be easily fired from either shoulder. The result? A 5.56 that combines portability with performance. Specifications

Impact Guns Core 15 Piston Driven AR-15 Package. Included Sousa R.A.I.D Red-Dot optic, 4 MFT Magazines, Blackhawk Sportster Tactical Carbine Case. Adjustable Gas Piston is excellent for suppressed shooting.MPN#: IMPACTF-15CUSTOM

Cartridge Capacity : 30 Barrel Length : 10.50 Action Type : Semi-Auto Finish : Matte Cartridge : 223 Wylde Item Length (Inches) : 30.500 Magazine Included : No Item Weight (lbs) : 7.500 Color : Black Magazine Type : Removable Make Model Fit : F-1 Firearms.FDR-15 Magazine Capacity : 30 Front Sight Type : None Rear Sight Type : None Magazine Quantity : 0 Muzzle : Muzzle Brake Safety Style : Manual Stock Material : Polymer Brownells sku: 100041621 MPN#: F1-FDR-PSTL UPC#: 850001820981

Introduced in 2014, the Ruger AR-556 has become one of the most prolific, affordable modern sporting rifles on the market, and now comes equipped with Magpul MOE Furniture. The AR-556 is constructed from top-quality components, including forged 7075-T6 aluminum upper and lower receivers and a cold hammer-forged chrome-moly steel barrel with M4 feed ramp cuts. Chambered in 5.56 NATO, the AR-556's carbine-length, flat-top, M4 design is fully configured with a Ruger® Rapid Deploy folding rear sight, milled F-height gas block with post front sight, forward assist, dust cover, and brass deflector.

The CMMG® MK4 Rifle is engineered with purpose for those who refuse to compromise quality. Each CMMG MK4 rifle comes with a 16" barrel and is designed for balance, accuracy, and maneuverability. The CMMG MK4 is equipped with a CMMG ZEROED Pistol Grip, an ejection port cover, and trigger guard to enhance aesthetics and overall functionality. Each MK4 is protected by a rugged Patriot Brown Cerakote finish. Whether you're defending your family or looking to bring out your best at the range, the CMMG MK4 keeps going when you need it most. - 16.1" 4140CM medium-taper barrel

B2_ATI_GAX5569ML Manufacturer Ati Pricing Unit GN Model Alpha-15 UPC 810113111025 SKU ATIGAX5569ML Width 10.1000 Length 40.1000 Height 3.9000 Weight 7.7500 Action Semi-Auto Barrel Description Pencil Barrel Finish Black Barrel Length 16" Barrel Length In Inches 16.0000 Barrel Length Range 16" to 16.99" Caliber 5.56x45mm NATO Capacity 30 Checkering N Detachable Magazine Y Dimension 3.70 X 10.25 X 40.30 Grips Black Polymer Hand Right Handguards Polymer Hinged Floorplate N Metal Color BLACK Metal Finish COLORED Metal Finish Group Blued/Black Oal 43"

The Del-Ton Sierra 316 is a semi-automatic rifle that is designed for law enforcement, military, and civilian use. This rifle features a 16-inch barrel that is made from chrome moly vanadium steel and is designed to deliver superior accuracy and durability. The Sierra 316 has a 1:9 twist rate that is optimized for stabilizing a wide range of bullet weights, making it a versatile choice for a range of shooting scenarios.

RADICAL 223WYLDE 18" 15"RPR 30RD BLK Radical Firearms Forged Milspec Rifle, Semi-automatic, 223 Wylde (will shoot 223 or 556), 18" 416R Stainless Steel Match Barrel, Heavy Barrel Contour, 1:8 Twist, Mid Length Gas System, 15" RPR M-LOK Handguard, A2 Flash Hider, B5 Stock, B5 Grip, 1 Magazine, 30Rd, Black RF00047 MPN#: FR18-223W-SS-15RPR UPC#: 816903027132

UPPER RECEIVER: AR-15 LEFT HANDED Mil-Spec Machined out of Billet Aluminum, M4 Feed Ramps, Type III Hardcoat Anodized Black BARREL: 14.5 inch, 5.56 NATO Caliber, 4150 Chrome Moly Vanadium Steel, 1:7 Twist, Medium Profile, Nitride/Melonite Treated - made for us by Tactical Kinetics HANDGUARD: 15 inch M-LOK Free Floated, Machined out of 6061 T6 Aluminum – made for us by Axis MFG - Cerakoted Magpul Flat Dark Earth (FDE) Color GAS SYSTEM: Carbine Length, Direct Impingement, Stainless Steel Tube GAS BLOCK: Low Profile Gas Block, Machined out of 4140 Steel

SKU: SLIMWTPRIFLE15

Stag Arms has been creating quality AR-15 in standard or custom configurations for years. Now you can get a rifle that feels custom from the box. Starting with the mil-spec upper that is designed to Be rugged yet still looking good in the process. Enhancing this upper also includes an ambidextrous charging handle allowing the shooter to manipulate the firearm in a variety of positions. Attached to the upper is the excellent 416R stainless steel barrel. This superior material provides excellent potential for accuracy and resistance to corrosion.

The MDRX (Micro Dynamic Rifle Xtreme) is designed for maximum concealment and ambidexterity, allowing operators to return fire at any angle without exposing unnecessary parts of their body to threats. It features upgraded polymer resin to better withstand high impact falls, and improved gas block drainage to ensure maximum reliable performance in water and mud submersion testing. The trigger pull and creep have been reduced to allow for more accurate shooting capability. The flash suppressor was also designed to reduce the flash better than current options found on the M4.

The all new ET Arms Omega-15 is packed with features right out of the box. This lightweight AR-15 features polymer receivers, the lower being infused with carbon fiber, and the patented upper includes metal inserts for both strength and rigidity. The 16", 1:8 twist barrel is perfect for the heavier M855 5.56 NATO ammo, while the 15" MLOK handgaurd gives plenty of room for optics and accessories. A comfortable overmolded rubber grip and ATI SR-1 Deluxe buttstock will keep you comfortable at the range all day long.

UPPER RECEIVER: AR-15 Mil-Spec Machined out of 7075-T6 Forged Aluminum, M4 Feed Ramps, Cerakoted Magpul Flat Dark Earth (FDE) Color with Forward Assist and Ejection Port Cover Installed BARREL: 13.7 inch, 5.56 NATO Caliber, 4150 Chrome Moly Vanadium Steel, 1:7 Twist, Medium Profile, Nitride/Melonite Treated - made for us by Tactical Kinetics HANDGUARD: 15 inch M-LOK Free Floated, Machined out of 6061 T6 Aluminum – made for us by Axis MFG - Cerakoted Magpul Flat Dark Earth (FDE) Color GAS SYSTEM: Mid Length, Direct Impingement, Stainless Steel Tube

Item : 12056_1 SKU : XG18 Model : X95 UPC : 856183006021

The Zastava USA PAP M90 is a semi auto AK style rifle chambered for 5.56 NATO. Features include an 18.25" barrel, Walnut furniture, an AK slant style muzzle device, adjustable sights, manual safety, and a 30 round magazine. ZASTAVA USA PAP M90 FEATURES

Here's another top quality AR, the Noveske Gen 4 Infidel. This rifle comes chambered in 556 Nato, sporting a 13.7" barrel with a pinned and welded KX-3 flash hider to make the required 16 inches. Coming in with all billet receivers and ambidextrious controls, along with a short throw safety selector and ALG Defense ACT trigger. Loaded with other awesome parts like the Geissele super badass charging handle, MBUS Pro sights, and NSR-15 M-Lok handguard. The rifle just needs a good home and some optics. Why change anything when this comes loaded with features? INFIDEL GEN 4 FEATURES

The M4A1 RIII AR15 style firearm features a fully ambidextrous lower that allows both left- and right-handed shooters to operate the bolt catch, safety selector, and magazine release without having to move or remove their dominant hand from the rifle’s grip. Its GRIP-N-RIP Charging Handle is ambidextrous as well. We’ve taken the RIS II picatinny quad rail used on our M4A1 original and replaced it with a 12.5 inch RIS III rail featuring M-LOK attachment for lighter weight while still offering M203 grenade-launcher attachment.

The Daniel Defense V7 is the first rifle in the DDM4 lineup to feature the M-LOK attachment technology with the Daniel Defense MFR 15.0 rail. Built around a Cold Hammer Forged, 16” barrel, the V7 has a DD improved Flash Suppressor to reduce flash signature. The mid-length gas system provides smooth and reliable cycling under any condition and reduces both perceived recoil and wear on moving parts.

The Daniel Defense M4 V7 SLW is one of the lightest, fastest-handling rifles available in the DDM4 line-up, tipping the scales at under 6 lbs. Built around a Cold Hammer Forged, 14.5" Lightweight profile barrel, the V7 SLW has an Extended Flash Suppressor which is pinned and welded to reach the NFA required 16" minimum barrel length. A free-floating MFR 13.5 handguard offers incredible weight savings as well as superior cooling, ergonomics, and modularity while maintaining the strength and durability expected from Daniel Defense.

The LWRCI Di is made with the same craftsmanship and design excellence that comes with every LWRCI firearm. Built from the ground up to be more than just another direct impingement rifle, it delivers the quality every rifle enthusiast demands with innovation that's expected from LWRCI. It features a "keyless" bolt carried design and ambi lower receiver.The IC Di M-Lok model features a M-Lok free-float rail, NiCorr-treated LWRCI DI gas block and gas tube, cold-hammer-forged, NiCorr-treated barrel with an A2 flash hider and a Monoforge upper receiver.

ACTION: Semi-Automatic CALIBER: 5.56 NATO MAGAZINE CAPACITY: (1) 30rd FINISH: Black Anodize WEIGHT: 6.2lbs OVERALL LENGTH: 32 ½”, 36 1/8” Extended BARREL LENGTH: 16″ M4 Contour RIFLING: 1:8 RECEIVERS: 7075-T6 Forged BCG: AM-15 Bolt Carrier Group – .223 CHARGING HANDLE: Standard Charging Handle GAS BLOCK: Low Profile FLASH HIDER: A2 FOREARM: A2 Plastic Hand Guard FRONT SIGHT: None PISTOL GRIP: A2 BUTT STOCK: M4 Anderson ADDITIONAL SPECS/NOTES: Barrel is compatible with .223 Ammunition.

The Ruger AR-556 Semi-Automatic Rifle is built with quality and performance in mind. The rifle features a 16.1" barrel with a 1:8 twist rate, allowing for accuracy and consistency with a variety of bullet weights. The rifle also features a six-position telescoping M4-style buttstock, providing a comfortable and customizable fit for any shooter.