Kak Industry Compensators & Brakes Gun Parts
(13 deals total)

  • Compensators & Brakes
  • Kak Industry

Filter Kak Industry Compensators & Brakes Gun Parts

2 weeks ago
The KAK Industry Compensator maintains the same size as an A2 birdcage while achieving remarkable performance. A closed face and gas ports in the upward position help direct expelled gasses to control muzzle climb and improve follow up shots. Brand: KAK Industry Finish: Manganese Phosphate Material: Steel - 4140 Chrome Moly Suppressor Mount: A2 Mount Thread Pattern: 1/2 X 28 Type: Compensator SKU#: KAK-COMP556
5
2 weeks ago
The KAK flash can is a solid 6061 Aluminum Device that is designed to direct muzzle gases and the muzzle flash forward. This device is not designed to reduce recoil, muzzle rise, or flash signature. This device is designed to direct gasses and noise forward from the shooter and enhance the weapons appearance. This muzzle device does not use a crush washer and should be torqued directly against the barrel shoulder. Measures 1.360" DIA and is 3.250" long. Threaded 1/2x28 for 5.56 or similar weapons *The bore will allow 9mm to pass through* Back Specifications Brand: KAK Industry
0
3 weeks ago
This flash can works great as a linear compensator, which directs your rifles blast, noise and escaping gases down range. These 5.56 linear comps are perfect for SBR / pistol 223 builds. They also work great on .22LR AR's, or any other rimfire caliber that shoots a projectile measuring 5.56 or smaller. This slim line design follows the KX5 diameter and will fit under most handguards and rails that the original flaming pig would otherwise not fit under. 1.200" DIA 3.250" LONG 6061 ALUMINUM BLACK HARD ANODIZED FINISH 3.5 OZ. 3/4" WRENCH FLATS
8
4 weeks ago
The KAK Industries A2 Birdcage flash hider is the old standard by which modern muzzle devices are measured. Combining excellent flash suppression and muzzle climb reduction with a minimal dust signature and blast, the A2 is easily one of the best muzzle devices available on the market. This .30 caliber birdcage is threaded for 5/8x24 barrels. Back Specifications Brand: KAK Industry Finish: Manganese Phosphate Material: Steel Suppressor Mount: A2 Mount Thread Pattern: 5/8 X 24 Type: Flash Hider MPN#: KAK-A2-FLASH-308
0
2 months ago
This micro flash can works great as a linear small compensator, which directs your rifles blast, noise and escaping gases down range. These 5.56 linear comps are perfect for SBR / pistol 223 builds. They also work great on .22LR AR's, or any other rimfire caliber that shoots a projectile measuring 5.56 or smaller. This slim line design follows the KX5 diameter but is much shorter and will fit under most handguards and rails that the original flaming pig would otherwise not fit under. 1.200" DIA 1.750" LONG 6061 ALUMINUM BLACK HARD ANODIZED FINISH 1.53 OZ. 3/4" WRENCH FLATS
21
2 months ago
The KAK flash can is a solid 6061 Aluminum Device that is designed to direct muzzle gases and the muzzle flash forward. This device is not designed to reduce recoil, muzzle rise, or flash signature. This device is designed to direct gasses and noise forward from the shooter and enhance the weapons appearance. This muzzle device does not use a crush washer and should be torqued directly against the barrel shoulder. Measures 1.360 DIA and is 3.250" long. Threaded 5/8-24 .30 caliber or similar weapons. Back Specifications Brand: KAK Industry Finish: Hardcoat Anodized
0
2 months ago
The KAK Industry Compensator maintains the same size as an A2 birdcage while achieving remarkable performance. A closed face and gas ports in the upward position help direct expelled gasses to control muzzle climb and improve follow up shots. Back Specifications Brand: KAK Industry Finish: Manganese Phosphate Material: Steel - 4140 Chrome Moly Suppressor Mount: A2 Mount Thread Pattern: 5/8 X 24 Type: Compensator MPN#: KAK-COMP30
0
4 months ago
Similar to the standard KAK flah can but smaller in diameter to fit inside slim rail systems. The KAK flash can is a solid 6061 Aluminum Device that is designed to direct muzzle gases and the muzzle flash forward. This device is not designed to reduce recoil, muzzle rise, or flash signature. This device is designed to direct gasses and noise forward from the shooter and enhance the weapons appearance. This muzzle device does not use a crush washer and should be torqued directly against the barrel shoulder. Measures 1.200 DIA and is 3.250" long. Threaded 1/2-36 for 9MM or similar weapons
1
4 months ago
This flash can works great as a linear compensator, which directs your rifles blast, noise and escaping gases down range. These 308 linear comps are perfect for SBR / pistol 300 blackout builds, or any short barrel AR that shoots a projectile that is 7.62 or smaller. This slim line design follows the KX5 diameter and will fit under most handguards and rails that the original flaming pig would otherwise not fit under. 1.200" DIA 3.250" LONG 6061 ALUMINUM BLACK HARD ANODIZED FINISH 3.5 OZ. 3/4" WRENCH FLATS THREADED 5/8-24 FOR 30 CALIBER OR SIMILAR WEAPONS
2
5 months ago
This MICRO .308 flash can works great as a linear compensator, which directs your rifles blast, noise and escaping gases down range. These 308 linear comps are perfect for SBR / pistol 300 blackout builds, or any short barrel AR that shoots a projectile that is 7.62 or smaller. This slim line design follows the KX5 diameter and will fit under most handguards and rails that the original flaming pig would otherwise not fit under. 1.200" DIA 1.750" LONG 6061 ALUMINUM BLACK HARD ANODIZED FINISH 1.53 OZ. 3/4" WRENCH FLATS THREADED 5/8-24 FOR 30 CALIBER OR SIMILAR WEAPONS
0
6 months ago
Description The KAK Industry 1/2-28 Slimline Flash Can features a slim 1.2″ outside diameter allowing it to be recessed under the majority of modern slim M-LOK or KeyMod Handguards. This simple yet effective flash can directs gasses, noise and concussion down-range away from the shooter. This is especially useful when shooting a short barreled rifle or pistol build. The flash can itself is machined from 6061 aluminum and is threaded for the 1/2×28 thread pattern found on many .223/5.56, .224 and 9mm barrels.
0
47 months ago , by Dealer
THIS IS A SOLID 6061 ALUMINUM DEVICE THAT IS DESIGNED TO DIRECT MUZZLE GASES AND THE MUZZLE FLASH FORWARD 5/8-24 THE BORE WILL ALLOW A 9MM TO PASS THROUGH BLACK MILITARY TYPE HARD ANODIZING THIS DEVICE IS NOT DESIGNED TO REDUCE RECOIL, MUZZLE RISE, OR FLASH SIGNATURE. THIS DEVICE IS DESIGNED TO DIRECT GASSES AND NOISE FORWARD AWAY FROM THE SHOOTER AND ENHANCE THE WEAPONS APPEARANCE. THIS MUZZLE DEVICE DOES NOT USE A CRUSH WASHER AND SHOULD BE TORQUED DIRECTLY AGAINST THE BARREL SHOULDER. 1.200 DIAMETER, 1.75 LONG 6061 ALUMINUM BLACK HARD ANODIZED FINISH 4.2 OZ. 3/4 WRENCH FLATS
0
  • UPC:
  • MPN:
48 months ago
Manufacturer kak industries Description KAK slimeline flash can. This will work for 9mm. An affordable forward projecting flash hider. Perfect for you AR pistol or short barrel rifle. Crush washer not included. thread pitch is 1/2-28 165985
0