Bravo Company Gun Parts

(52 deals total)

BCM® M4 Flat Top Upper Receiver with cosmetic blemishes. Most have scratches or scuffs. The upper comes unassembled, but complete with BCM forward assist assembly and ejection port cover door assembly. You must assemble it. (Assembly required) (all parts, but you will have to assemble together) THESE ARE USED/DEMO UPPER RECEIVER ASSEMBLIES. All will have several nicks, scratches, and marks on exterior finish. NO HANDPICKING. This receiver has the M4 feedramps machined in. This is to be used with barrels that include the M4 barrel extension. Built to the correct Mil-Specs.

NOTE: All BCM bolt carrier groups are factory test fired. The BCG may show handling marks consistent with these quality control procedures. The Bravo Company Manufacturing Bolt Carrier Group, with a parkerized exterior and chrome lined carrier interior, has been machined to USGI specifications. This M16/M4 carrier includes a properly staked gas key which has also been chrome lined, heat treated per MIL-SPEC, and secured to the carrier with grade 8 fasteners. Features: - MIL-SPEC carpenter no. 158 steel (bolt) - High pressure tested and magnetic particle inspected

***COSMETIC BLEM*** (Scratches or scuffs) Packaged in bulk. The BCM®™'s Grip (GFG) features Reduced angle for improved ergonomics and trigger control Hinged trap door offering storage inside the grip with a water resistant rubber gasket Each grip features an extended forward tang to close the gap between the trigger guard and pistol grip, and a high rise "beavertail" style back strap. Up to a quarter of an inch wider than the BCM® Mod 0 and Mod 1 grips. Made in the USA and manufactured from high quality impact resistant polymers.

COSMO-BCM-URG-MID-14-MCMR-13 About the BCM® Standard 14.5" Mid Length Complete Upper Receiver w/ MCMR-13 Handguard All BCM® Upper Receiver Groups with a MCMR Handguard Include: One 3" Picatinny Rail Section One BCM MCMR Sling Mount Manufactured by Bravo Company MFG, Inc. (BCM) These Barreled Upper Receiver Groups are designed for shooting professionals and responsible civilians with the Mil-Spec features for the demands of their duty. They are fully assembled, headspaced, and test fired.

The Bravo Company BCMGUNFIGHTER Vertical Grip Mod 3 has a low-profile design for increased mobility and reduced chance of snagging. The forward angle increases the rigidity of the forearm, while providing a more natural wrist angle. Mount in reverse to increase control when grabbing handguard and grip. Flat sides with aggressive texture give better yaw control to the shooter during firing and non-firing manipulations. Made in the U.S.A. from high quality, impact resistant polymers. Back Specifications Brand: Bravo Company Manufacturing Color: Flat Dark Earth Material: Polymer

***COSMETIC BLEM*** (Scratches or scuffs) Packaged in bulk. A Charging Handle for the 21st Century Gun Fighter A NEW Charging Handle and Extended Latch System Charging Handle forged from 7075 T6 Aluminum Hard Coat Anodized per Mil-A-8625F, Type III, Class 2 GFH - Mod 3B (large latch) and Mod 4B (medium latch) The Mod 3X3 latches extend past the main body of the charging handle by approximately 1.14". The Mod 4x4 latches extend past the main body of the charging handle by approximately .91".

THIS IS NOT A BCM PRODUCT (and does NOT go thru the BCM QC process). Quantities are limited. We aquired this as a surplus commerical spec AR15 Lower Parts Kit. A good option for a training or sporting rifle. Packed in bulk in a poly bag.

***COSMETIC BLEM*** (Scratches or scuffs) Packaged in bulk. BCM® Low Profile Gas Block for AR15, M16, M4, M4A1. Machined of steel, phosphate finish, for .750 barrels. Manufactured within very tight Mil-Spec tolerances on all ID's. Barrel ID honed after finish per USGI TDP. Made by Bravo Company MFG, Inc. with set screw mounting. Set Screws are Steel 10-32 x 3/16 Knurled Cup Point

Expect nothing less than professional grade weaponry from Bravo Company USA, holding one of the nation’s largest stocking inventories of AR-15, M4, and M16 parts and accessories. The Carbine Receiver Extension for AR-15 is machined from 7075-T6 aluminum for tough dependability. Compatible with USGI, BCM, Colt, LMT, SOPMOD, VLTOR, Stag Arms, Magpul CTR, and any other MIL-SPEC stock. Features: - MIL-SPEC Type III Class 2 hardcoat anodized - 7075-T6 aluminum - Compatible with carbine buffer and action springs - For AR-15/M16/M4 lower receivers - Outside diameter: 1.148” Back

The Bravo Company BCM Gunfighter Vertical Grip Mod 3 has a low-profile design for increased mobility and reduced chance of snagging. The forward angle increases the rigidity of the forearm, while providing a more natural wrist angle. Mount in reverse to increase control when grabbing handguard and grip. Flat sides with aggressive texture give better yaw control to the shooter during firing and non-firing manipulations. Made in the U.S.A. from high quality, impact resistant polymers. SPECIFICATIONS

Direct Attach Picatinny 1913 Rail Version Low-profile length for increased mobility and decreased “snag” factor. The forward angle increases the rigidity of the forearm, while providing a more natural wrist angle. Can be mounted in reverse angle to increase control when grabbing handguard and grip. Flat sides with aggressive texture give better yaw control to the shooter during firing and non-firing manipulations. Anchor and bolt system offers a simple robust design, while maintaining a lightweight 1.9 ounces.

The BCMGUNFIGHTER Compensator Mod 5 counters recoil and reduces muzzle rise on your AR-15 weapon. This muzzle accessory is designed with tuned slots and ports to aid in redirecting gases from fired projectiles, resulting in compensation of muzzle rise and flash reduction. Since the comp mod 5 has no ground-facing openings, there's no need to worry about the unwanted kick-up of dust or debris when shooting from the prone position.

The Bravo Company Manufacturing KMR Alpha handguard features KeyMod mounting slots on seven sides, plus a continuous Picatinny rail provide an enormous amount of space for all your favorite accessories. The durable barrel nut and mounting solution is rock solid and perfect for your next duty built AR-15. Features: - BCM KeyMod sling mount included - Flared toward the muzzle at the 3 and 9 o'clock positions approximately 1/4" - Actual length when measured to flare: 9.4" - Handguard alone weighs: 5.6 oz - Inside diameter: 1.3” - Outside diameter: 1.5” - Weight: 8 oz

The Bravo Company Manufacturing BCM Gunfighter SOPMOD Stock Assembly is a strong, lightweight polymer stock for Mil-Spec receiver extensions. Features a wider body than the standard Mod 0 Gunfighter stock, which provides a more pronounced cheek weld. With its snag free design, there are no sharp edges to tangle the rifle in the sling, MOLLE gear, or other kit. Includes the modular Vehicle Borne Operations Sling Tab. This tab interfaces with a ranger band to secure the sling against the stock when the carbine is not in use. 

The Bravo Company Manufacturing GUNFIGHTER Mod 1 carbine stock assembly takes the ergonomic, lightweight, and durable Mod and makes it even more capable. The slim design has been widened, offering an improved SOPMOD-style cheek weld. On-board storage has been added to the sote of the stock, accessible through the hinged butt pad. Just like the MOD 0, the MOD 1 offers multiple sling mount solutions, including ambidextrous QD sling swivels. Features: - Lightweight yet durable polymer construction - Snag-free design - Deburred for smooth handling

Manufacturer Bravo Model PNT (Polished, Nickel, Teflon) UPC 812526020451 SKU BCM-PNT-TA1 Width 4.2500 Length 7.0000 Height 1.0000 Weight 0.2500 Ar-15 Accessory Y Color Nickel Dimension 1.25 X 4.15 X 6.55 Finish/color Nickel Material Steel Size/finish AR-15 Type Trigger Type/color TRIGGER

Use coupon code to save 5%: BCM21 BCM FA BCG FDE Ion Bonded (Complete). Stripped carrier is finished in a IB Flat Dark Earth. Lowers friction and cleans easier.

The Bravo Company Manufacturing PNT Trigger Assembly is precision machined from MIL-SPEC AISI8620 investment castings. The PNT then undergoes a 3-step heat treat and case hardening process for optimal grain structure alignment, yielding a stronger and more wear resistance product. In another 3-step process, the hammer and trigger are finished. In the first step, polishing, the sear engagement surfaces are ground, then hand polished for increased smoothness and reduction in friction up to 300% beyond MIL-SPEC.

Expect nothing less than professional grade weaponry from Bravo Company USA, one of the nation’s largest stocking inventories of AR-15, M4, and M16 parts and accessories. Your rifle is only as reliable as the parts you put into it. Bravo Manufacturing is known for the highest quality components available. This enhanced lower parts kit included nearly everything you will need to transform your stripped AR-15 lower receiver into a reliable, functional, piece of hardware.

If you are in the market for a MK12 style rifle but would rather build it yourself, check out this Bravo Company USA SPR profile AR-15 barrel. It comes with all the features you expect from a BCM barrel like hand lapped button rifling, M4 feed ramps, and made out of high quality materials. While 416 stainless steel has its benefits, BCM chose to machine this barrel out of 410 stainless steel because of its higher corrosion resistant properties and overall hardness. Like most stainless steel barrels, it utilizes a medium or SPR profile that enhances accuracy by decreasing barrel vibration.

The Bravo Company Manufacturing GUNFIGHTER Charging Handle, through careful design and superior craftsmanship, is one of the most reliable on the market today. Its design removes a critical weak point which can result in failure of the charging handle latch. While charging the rifle, rather than placing pressure on the tiny roll pin which secures the latch to the body, forces are redirected into the body of the handle. Further strengthened by tough 7075-T6 billet aluminum construction ensures a long service life in your rifle.

The Bravo Company Manufacturing Low Profile Gas Block is manufactured within very tight MIL-SPEC tolerances. Machined from steel then phosphate finished, the internal diameter is then honed, ensuring a correct fit to your barrel. Secured using the two provided 10-32 x 3/16 knurled cup point set screws. NOTE: Does not include gas tube roll pin. Back Specifications Adjustable: Non-Adjustable Brand: Bravo Company Manufacturing Finish: Manganese Phosphate Manufacturer.: Bravo Company Manufacturing Material: Steel Platform: AR-15/AR-308 Size: .750 in Type: Low Profile

Expect nothing less than professional grade weaponry from Bravo Company USA, one of the nation’s largest stocking inventories of AR-15, M4, and M16 parts and accessories. The BCM Bolt Assembly is machined from carpenter No. 158 steel, shot peened for increased strength, and is high pressure tested and magnetic particle inspected. Includes tool steel machined extractor, ejector, and BCM extractor spring. Features: - MIL-SPEC carpenter no. 158 steel (bolt) - High pressure tested and magnetic particle inspected - Shot peened bolt - Tool steel extractor - BCM extractor spring

This assembly comes with everything you need to install the ejection port cover on your AR-15 upper receiver. It comes with an AR-15 ejection port cover, cover pin, c-clip, and ejection port cover spring. If you are replacing a broken part or setting one aside for a future build, you can’t go wrong with the BCM AR-15 ejection port cover assembly. Features: - Ejection port cover - Cover pin - C-clip - Ejection port cover spring

Description The new line of BCMGUNFIGHTER Charging Handles from Bravo Company USA Inc. are the culmination of a decade plus worth of feedback from operators in the field combined with superiordesign and engineering techniques. Each decision made in the design and manufacturing process of these charging handles is guided by the same principals which have established BCM as a trusted name in weaponry for the AR-15 platform. Available in a variety of configurations from mil-spec to extended to ambidextrous, the BCMGUNFIGHTER charging handle is a worthy upgrade for any AR-15 build.

NOTE: Does not include a bolt carrier group or charging handle. Expect nothing less than professional grade weaponry from BCM. This Bravo Company Manufacturing Barreled Upper Receiver is built around a 41V50 chrome moly vanadium steel barrel. This MIL-SPEC steel is stronger and will outlast most materials found in the commercial market.

Bravo Company Manufacturing KMR ALPHA Handguards are constructed from 100% aluminum. Hardcoat anodized for an anti-reflective, corrosion resistant finish. These handguards feature a proprietary, mounting, indexing, and locking system that mitigates rail movement under heat generated from the barrel nut. KeyMod mounting slots on seven sides, plus a continuous Picatinny rail provide an enormous amount of space for all your favorite accessories.  Features: - BCM KeyMod sling mount included - Flared toward the muzzle at the 3 and 9 o'clock positions approximately 1/4"

Right To Bear Charging Handle for 22LR builds only This .22 LR charging handle is designed to prevent spent casings from becoming stuck between the bolt and charging handle.Please note: This charging handle is designed to work with .22LR bolt carriers onlySKU:RTB-22BA596UPC:860006521469Maximum Purchase:50 units

The Bravo Company Manufacturing MIL-SPEC Carbine Stock Hardware Kit combines everything you need to install a MIL-SPEC carbine stock on your lower receiver. The 6-position receiver extension is machined from impact extruded 7075-T6 aluminum for improved strength and durability. A standard carbine buffer, carbine buffer spring, receiver end plate, and castle nut complete the kit. Just add your favorite stock! Buffer: 3.25 Carbine - Standard 3.00 oz Platform: AR-15 Type: Stock Hardware Kit MPN#: BCM-STOCK-HARDWARE-KIT

Expect nothing less than professional grade weaponry from Bravo Company USA, one of the nation’s largest stocking inventories of AR-15, M4, and M16 parts and accessories. Your rifle is only as reliable as the parts you put into it. Bravo Manufacturing is known for the highest quality components available. This enhanced lower parts kit included nearly everything you will need to transform your stripped AR-15 lower receiver into a reliable, functional, piece of hardware.

Featuring the same industry leading barrel nut and lock up design as originally introduced on BCM’s evolutionary KMR handguard, the MCMR Series of handguards gives the shooter modularity in the M-LOK platform. This proprietary patented mounting system (US Patent 8904691), includes a mechanical index to the 12:00 rail and positions mounting hardware to mitigate the movement caused by heat generated by the weapon system. MCMR features M-LOK Compatible mounting system. Free Float Handguard eliminates loads from barrel, reducing the deflection for more accurate shooting.

Bravo Company, Semi-automatic Complete Lower, AR, 223 Rem/556NATO, Black Finish, BCMGUNFIGHTER Stock Mod 0, Fire Controls Marked SAFE and SEMI, BCMGUNFIGHTER Enhanced Trigger Guard, BCMGUNFIGHTER QD End Plate, BCMGUNFIGHTER Pistol Grip. $350 with Free Shipping. https://www.doaarms.com/BCM-LOWER-GROUP-W-BCM-STK-MOD-0-BLK-p/lrg-stk-mod-0-blk.htm

Bravo Company Manufacturing KMR ALPHA Handguards are constructed from 100% aluminum. Hardcoat anodized for an anti-reflective, corrosion resistant finish. These handguards feature a proprietary, mounting, indexing, and locking system that mitigates rail movement under heat generated from the barrel nut. KeyMod mounting slots on seven sides, plus a continuous Picatinny rail provide an enormous amount of space for all your favorite accessories.  Features: - BCM KeyMod sling mount included - Flared toward the muzzle at the 3 and 9 o'clock positions approximately 1/4"

Gain better control of your weapon while firing shots on target with the help of this Bravo Company MFG BCMGUNFIGHTER Kinesthetic Angled Grip. Built to complement modern shooting grips, these Rifle Parts from Bravo Company MFG feature a forward rake that provides positive retention when utilizing the "C-clamp" method of handguard support, which is when your thumb is over the bore. The Bravo Company MFG BCMGUNFIGHTER M-LOK Compatible Kinesthetic Angled Grip is textured in the front and back for positive engagement you can truly feel.

Description The Bravo Company Manufacturing BCM Gunfighter Stock Assembly is a strong, lightweight polymer stock for Mil-Spec receiver extensions. With its snag free design, there are no sharp edges to tangle the rifle in the sling, MOLLE gear, or other kit. Includes the modular Vehicle Borne Operations Sling Tab. This tab interfaces with a ranger band to secure the sling against the stock when the carbine is not in use. 

All Bravo Company Gunfighter Kag Angled Foregrips Products on Sale

All BCM Gunfighter Vertical Grips on Sale.

Bravo Company introduces the BCMGUNFIGHTER Stock . The strongest light-weight polymer stock available for your mil-spec receiver extension is here! •Snag free Design. No sharp edges prevent tangling of the rifle with the shooter's sling, molle gear, or other kit. •Modular VBOST (Vehicle Borne Operations Sling Tab) – This tab interfaces with the shooter's riggers' band or bungee to secure the shooter's sling against the stock when the carbine is not in use. Increasingly, this is the most common application when operating inside a vehicle.

All BCM Bcmgunfighter Stocks on Sale

The freefloating Bravo Company MCMR M-LOK Rail eliminates external load on the barrel, reducing deflection for more accurate shooting. Featuring the same industry leading barrel nut and lock up design introduced on BCM's KMR handguard, the MCMR series of handguards delivers modularity for the M-LOK platform. Its proprietary patented mounting system (US Patent 8904691), includes a mechanical index to the 12-o’clock rail and positions mounting hardware to mitigate movement caused by heat. Features: - 6061-T6 aluminum alloy - Steel barrel nut included

Bcm Handguards Products!

100-026-750WB M-LOK BCMGUNFIGHTER Short Vertical Grip Polymer Black Mfr Part: BCMVGMCMRMOD3BL Attachment: M-LOK Color: Black Material: Polymer Description Specs Angled To Improve Comfort, Control & Handling The BCMGunfighter Vertical Grip Mod 3 M-LOK® is a lightweight variant of Bravo Company’s original Short Vertical Grip with a slim, easy-to-grasp profile that encourages the shooter to adopt a natural, comfortable wrist position. The practical benefit is less fatigue and enhanced control, especially when addressing multiple targets or engaging in rapid fire.

The Bravo Company Compensator Mod0-5.56 was not designed for the gamer, but for tactical applications requiring reduced muzzle rise, flash signature, noise, and lateral pressure. It features external dimensions that will accept BFA or flash hider mounted suppressors, tuned slots and an interior cone to maximize recoil mitigation, muzzle rise and flash reduction.

The Bravo Company USA H2 carbine buffer weight is designed to help reduce felt recoil with carbine and mid-length gas systems. The heavier weight can also help to reliably feed ammunition. This buffer weight is only for use in carbine length buffer tubes. It is weighted with two tungsten and one steel weight. The weights are supposed to be free floating inside of the buffer by design to help with recoil mitigation. If you want to fine tune the recoil of your carbine, the BCM H2 buffer weight will do the trick. Features: - 4.6 oz. overall weight - Two tungsten and one steel weight

The Bravo Company Manufacturing Low Profile Gas Block is manufactured within very tight MIL-SPEC tolerances. Machined from steel then phosphate finished, the internal diameter is then honed, ensuring a correct fit to your barrel. Secured using the two provided 10-32 x 3/16 knurled cup point set screws. NOTE: Does not include gas tube roll pin. Specifications Adjustable: Non-Adjustable Brand: Bravo Company Manufacturing Finish: Manganese Phosphate Manufacturer.: Bravo Company Manufacturing Material: Steel Platform: AR-15/AR-308 Size: .625 in Type: Low Profile

Description The new line of BCMGUNFIGHTER Charging Handles from Bravo Company USA Inc. are the culmination of a decade plus worth of feedback from operators in the field combined with superiordesign and engineering techniques. Each decision made in the design and manufacturing process of these charging handles is guided by the same principals which have established BCM as a trusted name in weaponry for the AR-15 platform. Available in a variety of configurations from mil-spec to extended to ambidextrous, the BCMGUNFIGHTER charging handle is a worthy upgrade for any AR-15 build.

Whether you're a high-volume AR shooter or love to build your rifles from scratch, the Bravo Company Manufacturing 5.56 NATO Lightweight Barreled Upper with MCMR-13 Handguard offers quality MIL-SPEC features ideal for all shooters. Features: - 5.56 NATO chamber - 16" Mil-B-11595E steel barrel - Cold hammer-forged barrel - Manganese phosphate barrel finish - M4 feed ramp barrel extension - T-marked upper receiver - USGI 1:7 twist rate - Chrome bore and chamber - 3" Picatinny rail section - BCM MCMR sling mount

The Bravo Company Manufacturing GUNFIGHTER Charging Handle, through careful design and superior craftsmanship, is one of the most reliable on the market today. Its design removes a critical weak point which can result in failure of the charging handle latch. While charging the rifle, rather than placing pressure on the tiny roll pin which secures the latch to the body, forces are redirected into the body of the handle. Further strengthened by tough 7075-T6 billet aluminum construction ensures a long service life in your rifle.

BCM® Receiver End Plate with socket for Quick Disconnect (QD) swivel.Machined from steel, and easily accommodates staking.Like all BCM® products, Made with pride in the U.S.A. MPN#: BCM-EPM4-QD

Bravo's BMC Lower Receiver Group with Stock has a carbine h buffer type, aBCM Mod 3 pistol grip, and a BCm enhanced trigger guard.Type: Complete Lower ReceiverGun Model: Multi-CaliberGun Type: AR PlatformCaliber: Multi-CaliberMaterial: 7075 T6 AluminumTrigger: Polished Nickel Teflon MPN#: LRG-STK-MOD UPC#: 0000IG-14526

Enjoy all the advantages and features of Bravo Company’s KeyMod™ Rail, now available in 100% aluminum. Manufactured from aluminum, it is lightweight yet durable. Also featuring a proprietary patent pending mounting, indexing and lock up system that mitigates 12:00 rail movement under heat generated from the barrel nut.

Bravo Company Compensator MOD0, Muzzle Break, 556NATO, 1/2x28, Fits AR Rifles, Black BCM-GFC-MOD-0-556 BCM® BCMGUNFIGHTER™ COMPENSATOR MOD 0 5.56 •Version: Mod 0 5.56 •Threaded 1/2x28 for 5.56mm AR15 platforms •Tuned slots & interior cone offer maximum in recoil mitigations compensation of muzzle-rise & flash reduction •Designed to have much less side blast & noise associated w/typical compensators •Ideal for CQB use •Stainless steel construction for max corrosion resistance •Includes Crush Washer •NOTE: Should be installed by qualified military armorer