Stag Arms Gun Parts
(28 deals total)

  • Stag Arms

Filter Stag Arms Gun Parts

15 hours ago
Action: Semi-Auto Direct Impingement Caliber: 5.56 NATO | .223 Twist Rate: 1/7 Button Rifled Muzzle Device: A2 Flash Hider Barrel: 18", 4150 CMV, SPR Profile, Nitride Coated Handguard: Stag 16.5" M-LOK SL with Quad Rail Receiver Material: Forged from Mil-Spec 7075 T6 Aluminum with Type 3 Hard Coat Anodizing Bolt Carrier: None Gas System: Rifle Length with Low Profile Gas Block Charging Handle: None SKU: STAG700091
0
2 days ago
Action: Semi-Auto Direct Impingement Caliber: 5.56 NATO | .223 Twist Rate: 1/7 Button Rifled Muzzle Device: A2 Flash Hider Barrel: 16", 4150 CMV, Nitride Coated Handguard: Stag 13.5" M-LOK SL Receiver Material: Forged from Mil-Spec 7075 T6 Aluminum with Type 3 Hard Coat Anodizing Bolt Carrier: None Gas System: Mid-Length with Low Profile Gas Block Charging Handle: None This upper half does not include a BCG or Charging Handle.
0
  • UPC:
  • MPN:
Stag Arms 311
4 days ago
The A3 Stripped Upper Receiver with Upper Parts Kit is made to mil-spec standards and ready for your next build. The Upper Parts Kit includes everything you need to install the dust cover and forward assist onto the stripped upper receiver.This product is blemished. Blemishes may include:• Minor tool marks• Flaws in finishThese products are fully functional. If you don't mind a slight imperfection, this is the perfect product for you.
5
4 days ago
The Stag 10 stripped upper receiver and Stag 10 stripped lower receiver is perfect to start your new .308 or 6.5 Creedmoor build. This set includes our proprietary takedown pin, detent pin, and takedown detent pin.Our upper receiver uses a DPMS High Profile, tang height of .210. It uses the same barrel nut threads as DPMS, accepts DPMS barrels, accepts Stag, Armalite and DPMS Charging Handles.Our lower receiver will accept any standard DPMS magazine, buffer and buffer spring. It will also work with any AR15 Stock.This product is blemished.
2
5 days ago , by Dealer
The Ambi Single-Point Sling End Plate allows for the attachment of single point slings to the right or left hand side of the rifle.SpecsInstallation: It replaces current end plate and is recommended to be installed by a gunsmithMaterial: SteelSKU: SA160111FAQQ: Will this work with an A2 buttstock?A: The ambi end plate will not work with an A2 buttstock. It will only work with the adjustable buttstock or our New Jersey and Massachusetts buttstocks.
0
5 days ago
Lower Receiver Material: 7075 T6 Aluminum with a Type III Hard Coat Anodize Hammer/Trigger Pin Size: Mil-Spec Small Pin .154" Pivot/Takedown Pin Size: Mil-Spec Small Pin .250" Buttstock: Magpul MOE SL-S Carbine Stock Buffer: Carbine Buffer and Spring Trigger: Mil-Spec Single Stage Trigger with Enhanced Trigger Guard Grip: Magpul MOE Pistol Grip SKU: STAG600052
0
2 months ago
The Stag Arms A3 upper receiver assembly is our very first Left-Handed upper receiver, available on ar15discounts.com. It is made to mil-spec standards and includes a picatinny rail on the top, dust cover, and installed forward assist. This Left Handed Upper Receiver is machined from 7075-T6 forgings, hard anodized and includes a factory installed Forward Assist and Dust Cover. Made in the USA ADDITIONAL INFORMATION WEIGHT 0.0000 oz FEED RAMPS M4 FINISHED Anodized Black FORWARD ASSIST Factory Installed PORT DOOR / DUST COVER Factory Installed RECEIVER MATERIAL
0
4 months ago
Featuring M4 type larger oval design, and single aluminum heat shield. MPN#: STAG:M4HG-Carbine
0
  • UPC:
  • MPN:
6 months ago
Lower Parts Kit: CMT / StagWeight 5.4 oz. MPN#: STAG300269
0
10 months ago
Stag Arms Llc Stag-15l Vrst S3, Complete Upper, 223 Rem/556nato, 16" Barrel, Black Finish, 13.5" Vrst S3 Mlok Handguard, Includes Bcg And Charging Handle Model: STAG-15L Product Type: Upper Finish/Color: Black Rail: MLOK Caliber: 5.56 NATO
0
11 months ago
Stag Arms Complete Uppers (No BCG) from $189.99 shipped
0
  • UPC:
  • MPN:
Stag Arms 7407
12 months ago
Our 'Honoring Our Vets' Edition has a 4-6 week lead time.The Stag 15 Tactical Builders Set - Honoring Our Vets Edition is a limited-edition AR15 builders set featuring a Battleworn Titanium Cerakote by Nevada Cerakote with "Honoring Our Vets” and "Honoring Those Who Served" laser engravings.Federal law requires this product to be transferred through a licensed FFL dealer. Stag Arms requires a copy of the dealer's FFL for verification.
0
12 months ago
Our Stag 15 Minimalist Lower Half utilizes furniture and accessories from Mission First Tactical for a perfect fit while shooting. This lower half is built on a MIL-Spec forged 7075 aluminum receiver with Type 3 hard coat anodizing, featuring MFT accessories including the MFT Battlelink Minimalist MIL-Spec stock that has an angled non-slip rubberized buttpad for quicker presentations, even while wearing body armor.The single stage trigger is housed within an MFT E-VolV Enhanced Trigger Guard with an over-sized opening that allows full access to the trigger, even with gloves.
0
16 months ago
Our magazines will fit any AR-15 or M16 rifle with an upper half chambered in the 5.56 mm or .223 mm caliber. Available in 5, 10, 20 and 30 round capacity. Please choose the appropriate capacity drop down. Specs Material: Stainless Steel Follower: Anti-tilt Finish: Black SKU: SA300110
0
  • UPC:
  • MPN:
Stag Arms 260
17 months ago , by Dealer
Stag Arms Billet Slick Side RH Upper with 15" Mlok Handguard - Andonized Black. Comes with Aluminum barrel nut.
0
  • UPC:
  • MPN:
18 months ago
The Stag 10 Rifle Receiver Extension Kit includes everything you would need to install an aftermarket stock onto a .308 rifle set up.SpecsIncludes: A2 Buffer TubeButtcap SpacerA2 Buttstock Screw.308 Rifle Buffer.308 Rifle Buffer Spring*Stock Not IncludedSKU: SA300054FAQThere are no FAQ
0
18 months ago
The Stag 15L 3Gun Elite Upper was designed specifically for left-handed 3-Gun competitors, where fast and accurate shooting is required.
0
18 months ago
The Stag 15L Super Varminter Upper (6.8 SPC II) was specifically designed for left-handed game hunters.This upper features a 6.8 SPC with a SAAMI SPEC II chamber 20.77" 1/11 barrel, 11 degree target crown and Hogue handguard.This upper half does not include a BCG or Charging Handle.SpecsAction: Semi-Auto Direct ImpingementCaliber: 6.8 SPC with a SAAMI SPEC II chamberTwist Rate: 1/11 button rifledBarrel: 20.77", 410 Stainless Steel, Heavy ProfileMuzzle Device: 11 Degree Target CrownHandguard: Hogue Free Float Handguard with Sling Swivel AttachmentUpper Receiver: 7075 T6 aluminum with type 3 har
0
18 months ago
The Stag 15 Carbine Receiver Extension Kit includes everything you need to attach an aftermarket buttstock.  It is designed for the attachment of mil-spec buttstocks.SpecsParts:Carbine action springCarbine standard weight buffer assemblyMil-spec 6-position extension receiverReceiver end plateReceiver nutSKU: STAG300256FAQDoes Stag Arms offer installation instructions?We recommend this item be installed by a gunsmith to prevent any damage to the rifle. 
0
18 months ago
The Stag 15L Minimalist Left-Handed Upper feature Stag's high quality and long-lasting durability standards, outfitted with Mission First Tactical furniture and accessories. The Minimalist upper features a 5.56x45mm NATO chamber 16" 1/7 chrome lined barrel paired with MFT furniture including the Tekko Polymer AR15 Carbine M-LOK Rail. This upper half does not include a BCG or Charging Handle. Action: Semi-Auto Direct Impingement Caliber: 5.56 NATO | .223 Twist Rate: 1/7 Button Rifled Muzzle Device: A2 Flash Hider
0
18 months ago
Chambered in .300 Blackout, the Stag Arms AR Pistol Upper Half is a Mil-Spec AR Upper built around a 8" 1/7 twist barrel with a pistol length gas system and a low profile gas block. The 4150 Chrome Moly Vanadium Steel barrels are QPQ treated for advanced case hardening that increases corrosion resistance and increases accuracy potential. The 7" M-LOK Free-Float Handguard provides increased airflow, ergonomics and modularity. This complete upper does not include BCG or Charging Handle. Action: Semi-Auto Direct Impingement Caliber: .300 Blackout
0
18 months ago
The 16" 5.56 NATO 1/9 twist barrel has a military M4 profile and is the same barrel used on our New York compliant carbines. The barrel extension is pre-installed and headspaced. Caliber: 5.56 NATO | .223 Length: 16" Diameter at the gas port: .750" Barrel Threading: None - 11 degree target crown Barrel Profile: Government Profile Barrel Material: 4140 Chrome Moly Vanadium Twist Rate: 1/9 Bore & Barrel Lining: Mil-spec Chrome Lined Barrel Coating: Manganese phosphate Gas System: Carbine length direct impingement SKU: SA400049
0
18 months ago
This bundle includes our Nickel Boron Bolt Carrier Assembly, Nickel Boron Two-Stage Trigger Set and Anti-Rotation Pin Set. Nickel Boron Coated Bolt Carrier Assembly - Right Handed: Coating: Extremely Durable Nickel Boron Coating Bolt carrier material: 8620 steel Bolt: 5.56/.223 Right-Handed Bolt assembly Included parts: Bolt carrier, bolt assembly, cam pin, firing pin, and firing pin retaining pin Design: M16 carrier with a shrouded firing pin Staking: Proper mil-spec staking of the gas key Nickel Boron Two-Stage Trigger Set:
1
22 months ago
Factory New Stripped AR Lower Receiver All Stag Arms receivers are mad of forged 7075 T6 Aircraft quality Aluminum. They are all bead blasted and coated with Type III Class 2 Hard Coat to insure strength, and durability.ᅠManufacturer: Stag ArmsManufacturer part number: SASLRFactory New Stripped AR Lower Receiver All Stag Arms receivers are mad of forged 7075 T6 Aircraft quality Aluminum. They are all bead blasted and coated with Type III Class 2 Hard Coat to insure strength, and durability.ᅠManufacturer: Stag ArmsManufacturer part number: SASLR
0
25 months ago , by Dealer
$5.95 Flat Rate Shipping This bolt carrier assembly is designed to work with any AR-15 rifle, upper half, or barrel designed for right hand ejection in the 5.56/.223 caliber. The nickel boron coating has increased lubricity and a low friction co-efficient; therefore, the life expectancy of a firearm will be greatly increased due to reduced friction wear. Specs: Coating: Extremely Durable Nickel Boron Coating Bolt carrier material: 8620 steel
0
  • UPC:
  • MPN:
31 months ago
The Stag stripped A3 upper receiver is made to meet or exceed mil-spec. Includes T-Markings and M4 Feed Ramps. Features: - Pivot/Takedown Pin Size: Small pin - .250" - Matte Black 7075 T6 Aluminum - Type 3 hard coat Anodizing - M4 Feed Ramps - Accepts Mil-Spec Ejection Port Door Kit and Forward Assist Kits
0
57 months ago
The 16" 5.56 NATO 1/9 twist barrel assembly has a military M4 profile and is the same assembly used on our Model 1 and Model 2 rifles. It includes all the parts to attach it to an upper receiver. Chamber: 5.56 NATO (The barrel assembly will also shoot .223 ammunition) Length: 16" Diameter at the gas port: .750" Barrel Threading: 1/2x28 Barrel Profile: Government Profile Barrel Material: 4140 Steel Twist Rate: 1/9 Bore & Barrel Lining: Mil-spec Chrome Lined Barrel Coating: Manganese phosphate Sight: F-marked A2 front sight with a side sling swivel
0
  • UPC:
  • MPN:
62 months ago
The A3 upper receiver assembly is made to mil-spec standards and includes a picatinny rail on the top, dust cover, and installed forward assist. Pivot/Takedown Pin Size: Small pin - .250" Material: Forged and mil-spec with type 3 hard coat anodizing and a picatinny rail on top
0
  • UPC:
  • MPN:
Stag Arms 531