Kak Industry Gun Parts (63 deals total)
- Kak Industry
Filter Kak Industry Gun Parts
5 days ago
Shockwave is proud to introduce the patent-pending Blade pistol stabilizer. Made from high-strength glass-reinforced polymer, the Blade is manufactured to exacting tolerances and fits all pistols equipped with a standard AR-15 pistol buffer tube (up to 1.25″ in diameter). No special receiver extension needed. No half-hour installation process. Just slip it on and tighten the large set screw for a rock-solid installation.
Fits all pistols equipped with a standard AR-15 pistol buffer tube (up to 1.25″ in diameter)—AR pattern, Glock, CZ Scorpion Evo 3, HK9X pattern, etc.
- UPC: 029882157381
- MPN: 15738
5 days ago
Shockwave is proud to introduce the patent-pending Blade pistol stabilizer. Made from high-strength glass-reinforced polymer, the Blade is manufactured to exacting tolerances and fits all pistols equipped with a standard AR-15 pistol buffer tube (up to 1.25″ in diameter). No special receiver extension needed. No half-hour installation process. Just slip it on and tighten the large set screw for a rock-solid installation.
EVERY SET COMES WITH ATF APPROVAL LETTER
- UPC:
- MPN: KAK-SHKWV-FDE
2 weeks ago
The Micro Slimline Flash Can is a solid 6061 aluminum muzzle device designed to direct muzzle gases and noise forward and enhance the weapons appearance. This device can withstand hard use without creating back pressure, ensuring that gas cutting is not a problem. This muzzle device does not use a crush washer and should be torqued directly against the barrel shoulder, though a crush washer may be used if specific timing is desired.
NOTE: This device is not designed to reduce recoil, muzzle rise, or flash signature.
Features:
- Designed for .30 caliber or similar weapons
- UPC:
- MPN: KAK-CAN-5824-MICRO
2 weeks ago
This micro flash can works great as a linear small compensator, which directs your rifles blast, noise and escaping gases down range. These 5.56 linear comps are perfect for SBR / pistol 223 builds. They also work great on .22LR AR's, or any other rimfire caliber that shoots a projectile measuring 5.56 or smaller. This slim line design follows the KX5 diameter but is much shorter and will fit under most handguards and rails that the original flaming pig would otherwise not fit under.
1.200" DIA
1.750" LONG
6061 ALUMINUM
BLACK HARD ANODIZED FINISH
1.53 OZ.
3/4" WRENCH FLATS
- UPC:
- MPN: AR15-UP-260-MICRO
3 weeks ago
KAK Shockwave Pistol Stabilizing Blade + KAK Buffer Tube Kit - FDEThis KAK Flat Dark Earth pistol blade and KAK Shockwave buffer tube kit comes with everything you need to finish your AR-15 pistol build. The KAK buffer tube is designed with holes that allow you to attach and adjust your blade more securely. Comes with:KAK Shockwave Blade Pistol Stabilizer - FDEKAK Shockwave Buffer Tube (SPECIALLY DESIGNED FOR ADJUSTING KAK BLADE)Carbine buffer (2.9oz)Carbine buffer springCarbine stock end plateCarbine stock lock ring-castle nut
MPN#: SHOCKWAVE-BLADE-TUBE-KIT-FDE
- UPC:
- MPN: SHOCKWAVE-BLADE-TUBE
1 month ago
The KAK Industry 45 Bolt assembly is designed for AR-15 style rifles chambered for .45 ACP with a direct blowback system. This bolt is weighted with Tungsten weights adding up to 16 ounces total in order to eliminate the need for heavy buffers. This added weight is necessary for blowback firearms because it helps to delay the bolt from moving rearward just long enough for pressures to reach a safe level. Depending on your setup, it can also reduce felt recoil and reduce the amount of bolt bounce. It features a full size .308 style extractor that can be removed for cleaning.
- UPC: 811163036047
- MPN: KAK-45ACP-BCG
1 month ago
The Low Profile Gas Block is machined from 4140 steel with a blasted manganese phosphate finish. With a very low profile, this gas block should clear most rail systems. For use on barrels with a .750” gas seat diameter. Set screws and gas tube roll pin included.
Features:
- 4140 steel construction
- Manganese phosphate finish
- Gas tube roll pin included
- .750” gas seat diameter
With a reputation for precision manufacturing, KAK Industry offers quality, American made components at affordable prices.
Back
Specifications
Adjustable: Non-Adjustable
Brand: KAK Industry
- UPC:
- MPN: KAK-BLOCK
1 month ago
The KAK Industries A2 Birdcage flash hider is the old standard by which modern muzzle devices are measured. Combining excellent flash suppression and muzzle climb reduction with a minimal dust signature and blast, the A2 is easily one of the best muzzle devices available on the market.
This 5.56 caliber birdcage is threaded for 1/2x28 barrels. Does NOT include crush washer.
Back
Specifications
Brand: KAK Industry
Finish: Manganese Phosphate
Material: Steel
Suppressor Mount: A2 Mount
Thread Pattern: 1/2 X 28
Type: Flash Hider
MPN#: KAK-A2-FLASH-556
- UPC:
- MPN: KAK-A2-FLASH-556
1 month ago , by Dealer
KAK Industry AR-15 Complete Mil-Spec Lower Parts Kit (LPK)
INCLUDES:
Black A2 Pistol Grip
Pistol Grip Screw
Pistol Grip Lock Washer
Trigger Guard
Trigger Guard Roll Pin
Standard Trigger
Trigger Spring
Trigger Pin
Hammer
Hammer Spring
Hammer Pin
Disconnector
Disconnector Spring
Safety Selector
Selector Spring
Selector Detent
Bolt Catch Spring
Bolt Catch
Bolt Catch Roll Pin
Magazine Catch Button
Magazine Catch
Magazine Catch Spring
Front Pivot Pin
Pivot Pin Detent Spring
Takedown Pin
Take Down Detent
Buffer Retainer Pin
Buffer Retainer Spring
- UPC:
- MPN: AR15-LP-KT-010
2 months ago
KAK Black Pistol Blade & Shockwave Buffer Tube KitIncluded in this KAK pistol blade and KAK Shockwave buffer tube kit is everything you'll need for finishing your build of a new AR15 pistol. Designed with holes for easy attachment and blade adjustment, the Shockwave is specially designed to pair perfect with KAK blades. Each component is black anodized for a strong durable finish that's corrosion resistant and more reliable over regular use, and we're pleased to offer the entire kit at a great sale price.
- UPC:
- MPN: SHOCKWAVE-BLADE-TUBE
2 months ago
Description
ATF Approved and built to last the KAK Shockwave Blade Pistol Stabilizer is a high-strength polymer brace which mounts on any AR-15 Pistol equipped with a pistol buffer tube (up to 1.25″ in diameter). Once installed this unit locks down securely for a great fit.
Color: Black
Material: High Strength Polymer
Manufacturer: Shockwave Technologies
Weight: 0.0000 oz
MPN: KAK-SHKWV-BLK
SKU: 2092
- UPC: 029882157381
- MPN: KAK-SHKWV-BLK
2 months ago
With a reputation for precision manufacturing, KAK Industry offers quality, American made components at affordable prices.
The KAK Industry AUTO 7.62x39mm bolt carrier group is machined to match MIL-SPEC M16 bolt carriers for the greatest reliability, as well as compatibility with registered auto sears. The bolt face has a standard .125" depth for use with the popular 7.62x39mm cartridge.
Features:
- 7.62x39mm bolt face
- M16 cut bolt carrier
- Magnetic particle tested
- Durable military phosphate finish
- Forward assist serrations
- Correct auto sear trip location
- UPC:
- MPN: KAK-762X39-BCG
2 months ago
Ak Ar15 Lower Parts Kit Features Kak Produced Parts Throughout Mil Spec Trigger Group Kak Billet Trigger Guard Included! Standard A2 Handle Kak Black Oxide Springs 100 Percent Usa
Specifications for KAK AR-15 Lower Parts Kit:
Gun Model: AR-15
- UPC: 811163030458
- MPN: AR15LPKT010
2 months ago , by Dealer
Folding Stock Adapter Kits Starting at $177.99
FEATURING SYLVAN ARMS FOLDING STOCK ADAPTER:
SPECIFICATIONS:
Fit: all platforms .223/5.56 to .308 & 9mm with Sylvan Arms 9mm Bolt Conversion
Surface treatment: Cerakote matte black
Material: 7075 CNC-machined billet Aluminum
Thread specifications: 1-3/16" X 16
Hinge dimensions: 3 11/16 inches
Hinge length: 1.3 inches
Warranty: limited lifetime
Use 'gdjune2022' at checkout to get 5% off your Entire Order - Valid Through The Month Of June
Cannot Be Combined With Any Other Promotion Or Coupon Code
- UPC:
- MPN:
Delta Team Tactical 5912
3 months ago
The KAK Industry AR-15 MIL-SPEC Carbine Buffer Tube offers a quality option for mounting a MIL-SPEC carbine stock to your AR-15. This AR-15 Carbine Buffer tube is made in-house at KAK using 7075 impact extrusions and features a durable hardcoat anodized finish. With six positions to choose from, you can adjust accordingly for the perfect length of pull for nearly any shooter.
Features:
- Six position
- Mil-spec carbine buffer tube
- 7075 impact extrusions
- 3.7 oz
Back
Specifications
Brand: KAK Industry
Platform: AR-15
Weight: 3.7 Oz
MPN#: AR-LP-150
- UPC:
- MPN: AR-LP-150
4 months ago , by Dealer
KAK Barrel Dimple Drill Jig Kit .750
The KAK Multi Position Barrel Dimple Drilling Jig is great for perfectly aligning dimples for your AR-15 barrel. The Drilling Jig is constructed from 4140 hardened steel with a mag phosphate finish. The Drilling Jig is designed specifically for .750 diameter barrels and gas block set screw spacings of .400, .425, .450, .470, and .500.
INCLUDES:
Drill Jig
KEO Brand Spot Drill
Pointed Set Screw for Alignment
Allen Wrench
- UPC:
- MPN:
MMC Armory 99
6 months ago
Introducing the KAK bolt catch roll pin starter punch, also known as Walt’s tool. Do you lack 6 fingers and an extra hand when trying to get the bolt catch roll pin started on your build? This 304-stainless tool is a like a surgeon's instrument, but designed for a caveman. Sized to hold the bolt catch roll pin steady and get it started without scratching up your lower. Made from durable rust free 304 stainless but kept the design simple and to the price point low.
Features:
- Built from stainless steel
- Makes installing bolt catch roll pins a breeze
- UPC:
- MPN: KAK-PUNCH
6 months ago
KAK AR-15 Lower Parts Kit w/ No Grip
If you like what you see, please don't hesitate to hit that "thumbs up" on the post
Thanks!
- Delta Team Tactical
Sign Up for our Newsletter and receive an additional COUPON CODE for another purchase
CLICK HERE TO SIGN UP FOR NEWSLETTER
Click Here To Follow Us On Instagram
- UPC:
- MPN:
6 months ago , by Dealer
MMC Combos KAK Shockwave 2.0M AR-15 Finish Your Lower Pistol Kit
KAK Shockwave 2.0-M Adjustable
Pistol Stabilizer Fits Mil-spec Buffer Tube
This pistol stabilizer brace is made from high strength glass-reinforced polymer. The adjustable Blade 2M pistol stabilizer has been made to exacting tolerances and is able to fit all pistols equipped with a Mil-spec buffer tube. Easy to install, just slip it on and lock in place, this pistol brace adjusts with a simple finger lever. Made in the USA and designed by veterans, this brace is approved for use by the ATF as well.
SPECIFICATIONS:
- UPC:
- MPN:
MMC Armory 138
6 months ago
KAK Industries 1/2x28 .223/5.56 Slim Line Flash CanIn need of a linear compensator to direct blast, noise and gases down range? The Slim Line flash can from KAK Industries is a great option. This particular model is perfect for 5.56, .223 or 22LR pistol, rifle or SBR builds, and it can be used on .22LR rifles or rimfire caliber rifles shooting 9mm or smaller. Following the KX5 diameter, this flash can will fit under most handguards and rails. Keep in mind that it does not use a crush washer so it should be torqued directly against the barrel shoulder.
- UPC:
- MPN: AR15-UP-260
6 months ago
This MICRO .308 flash can works great as a linear compensator, which directs your rifles blast, noise and escaping gases down range. These 308 linear comps are perfect for SBR / pistol 300 blackout builds, or any short barrel AR that shoots a projectile that is 7.62 or smaller. This slim line design follows the KX5 diameter and will fit under most handguards and rails that the original flaming pig would otherwise not fit under.
1.200" DIA
1.750" LONG
6061 ALUMINUM
BLACK HARD ANODIZED FINISH
1.53 OZ.
3/4" WRENCH FLATS
THREADED 5/8-24 FOR 30 CALIBER OR SIMILAR WEAPONS
- UPC:
- MPN: AR15-UP-261-MICRO
6 months ago
Description
This Is The Same Buffer Included In Our Kits
Hard Black Anodized Finish
Weight 0.0000 oz Weight
3oz
MPN
AR-LP-105
SKU: 2660
- UPC:
- MPN: AR-LP-105
7 months ago
Finish – Hardcoat Anodized
Manufacturer – KAK Industries
Material – Aluminum – 6061-T6
Weight – 4.8 Oz.
Weight 0.0000 oz MPN
KAK-SHKWAVE-TUBE
SKU: 2093
MPN#: KAK-SHKWAVE-TUBE
- UPC:
- MPN: KAK-SHKWAVE-TUBE
7 months ago , by Dealer
$66.88
KAK INDUSTRY AR15 CONFIGURABLE BUFFER KIT
THESE KITS ARE GREAT FOR FINICKY BUILDS, 9MM, SPECIAL SUBSONIC WORK, ETC
INCLUDES:
1X BLASTED HARD BLACK ANODIZED BUFFER BODY
3X ALUMINUM WEIGHTS
3X STEEL WEIGHTS BLACK OXIDE COATED
3X TUNGSTEN WEIGHTS
4X RUBBER SPACER DISKS (1 SPARE)
2X BUFFER BUMPERS (1 SPARE)
2X ROLL PINS (1 SPARE)
BUFFER COLORS MAY VARY, BUT YOU WILL RECEIVE 2 DIFFERENT COLORS
CONFIGURE AND TUNE YOUR BUFFER FOR YOU SPECIFIC NEEDS
USING DIFFERENT COMBINATIONS OF THE SUPPLIED PARTS
- UPC:
- MPN:
AR15Discounts 1571
10 months ago
The KAK flash can is a solid 6061 Aluminum Device that is designed to direct muzzle gases and the muzzle flash forward. This device is not designed to reduce recoil, muzzle rise, or flash signature. This device is designed to direct gasses and noise forward from the shooter and enhance the weapons appearance. This muzzle device does not use a crush washer and should be torqued directly against the barrel shoulder. Measures 1.360 DIA and is 5" long. Threaded 5/8-24 .30 caliber or similar weapons.
*The bore will allow a 45 caliber to pass through*
Back
Specifications
- UPC:
- MPN: KAK-CAN-5824-EXT
11 months ago , by Dealer
KAK ENHANCED 9MM BCG
COMPLETE 9MM BOLT CARRIER GROUP
M16 EXTRACTOR REMOVABLE FOR CLEANING
STEEL WEIGHTED CARRIER WORKS WITH ALL TYPES OF HAMMERS
COMPATIBLE WITH COLT AND GLOCK STYLE MAGS
Visit kakindustry.com to shop. Discount visible in cart. 15% off!!
- UPC:
- MPN:
KAK Industry LLC 132
11 months ago , by Dealer
Billet 80% Lowers are on sale now! 15% off
Stock up and save! No minimums to purchase, and no limits.
No coupon required, discount applied automatically at checkout.
Don't wait!
Visit www.kakindustry.com now to shop
- UPC:
- MPN:
Go to deal 53
11 months ago , by Dealer
KAK Industry full AR-15 lower parts kit
USA made
Mil-Spec
INCLUDES:
Black A2 Pistol Grip
Pistol Grip Screw
Pistol Grip Lock Washer
Trigger Guard
Trigger Guard Roll Pin
Standard Trigger
Trigger Spring
Trigger Pin
Hammer
Hammer Spring
Hammer Pin
Disconnector
Disconnector Spring
Safety Selector
Selector Spring
Selector Detent
Bolt Catch Spring
Bolt Catch
Bolt Catch Roll Pin
Magazine Catch Button
Magazine Catch
Magazine Catch Spring
Front Pivot Pin
Pivot Pin Detent Spring
Takedown Pin
Take Down Detent
Buffer Retainer Pin
Buffer Retainer Spring
- UPC:
- MPN:
MMC Armory 125
12 months ago
The KAK flash can is a solid 6061 Aluminum Device that is designed to direct muzzle gases and the muzzle flash forward. This device is not designed to reduce recoil, muzzle rise, or flash signature. This device is designed to direct gasses and noise forward from the shooter and enhance the weapons appearance. This muzzle device does not use a crush washer and should be torqued directly against the barrel shoulder. Measures 1.360" DIA and is 3.250" long. Threaded 1/2x28 for 5.56 or similar weapons
*The bore will allow 9mm to pass through*
Back
Specifications
Brand: KAK Industry
- UPC:
- MPN: KAK-CAN-1228-FULL
12 months ago
Similar to the standard KAK flah can but smaller in diameter to fit inside slim rail systems.
The KAK flash can is a solid 6061 Aluminum Device that is designed to direct muzzle gases and the muzzle flash forward. This device is not designed to reduce recoil, muzzle rise, or flash signature. This device is designed to direct gasses and noise forward from the shooter and enhance the weapons appearance. This muzzle device does not use a crush washer and should be torqued directly against the barrel shoulder. Measures 1.200 DIA and is 3.250" long. Threaded 1/2-36 for 9MM or similar weapons
- UPC:
- MPN: KAK-CAN-1236-SLIM
12 months ago
Similar to the standard KAK-CAN-1228-FULL but smaller in diameter to fit inside slim rail systems.
- UPC:
- MPN: KAK-CAN-1228-SLIM
12 months ago
The KAK Industries A2 Birdcage flash hider is the old standard by which modern muzzle devices are measured. Combining excellent flash suppression and muzzle climb reduction with a minimal dust signature and blast, the A2 is easily one of the best muzzle devices available on the market.
This .30 caliber birdcage is threaded for 5/8x24 barrels.
Back
Specifications
Brand: KAK Industry
Finish: Manganese Phosphate
Material: Steel
Suppressor Mount: A2 Mount
Thread Pattern: 5/8 X 24
Type: Flash Hider
MPN#: KAK-A2-FLASH-308
- UPC:
- MPN: KAK-A2-FLASH-308
13 months ago
KAK Industries 5/8x24 SLIM LINE Flash Can - .308This flash can works great as a linear compensator, which directs your rifles blast, noise and escaping gases down range. These 308 linear comps are perfect for SBR / pistol 300 blackout builds, or any short barrel AR that shoots a projectile that is 7.62 or smaller.
- UPC:
- MPN: AR15-UP-261
13 months ago
The KAK Industry Compensator maintains the same size as an A2 birdcage while achieving remarkable performance. A closed face and gas ports in the upward position help direct expelled gasses to control muzzle climb and improve follow up shots.
Back
Specifications
Brand: KAK Industry
Finish: Manganese Phosphate
Material: Steel - 4140 Chrome Moly
Suppressor Mount: A2 Mount
Thread Pattern: 5/8 X 24
Type: Compensator
MPN#: KAK-COMP30
- UPC:
- MPN: KAK-COMP30
17 months ago
100-020-822WB
Shockwave Package-OD Green
Description
Specs
Shockwave is proud to introduce the patent-pending Blade pistol stabilizer. Made from high-strength glass-reinforced polymer, the Blade is manufactured to exacting tolerances and fits all pistols equipped with a standard AR-15 pistol buffer tube (up to 1.25″ in diameter). No special receiver extension needed. No half-hour installation process. Just slip it on and tighten the large set screw for a rock-solid installation.
- UPC:
- MPN:
Brownells 588
18 months ago
PRODUCT DESCRIPTION
Features:
Fits all Pistols with standard AR-15 pistol buffer tube
No receiver extension required
Quick installation and worry free fit
Lightweight and ergonomic
Provides additional support
ATF Approved for Pistol Use
Veteran designed, engineered, and sold
Includes:
2.5 inch Buffer
Buffer tube and spring
Stainless Steel End Plate
Castle Nut
Weight:
5 oz
Material:
High strength, glass reinforced Polymer
Color:
Black
Made In:
USA
- UPC:
- MPN:
22Mods4All 79
29 months ago
KAK 3.5 9MM M-LOK UPPER - NO BCG OR CHARGING HANDLE
Includes:
- KAK 3.5" 9mm barrel, 41V50 Melonite, 1:10 twist, 1/2-36 threads
-KAK 1/2-36 Micro Flash Can
-KAK 4" M-LOK Handguard
-KAK AR15 Upper Receiver
- UPC:
- MPN:
KAK Industry LLC 361
30 months ago
KAK Christmas Sale -20% off and Free shipping on all purchases over $100
Use Code "XMAS20" at checkout
-Not to be used with bulk purchases or other discounts
-Good until 11:59 PST Dec 30
-Not Retroactive
- UPC:
- MPN:
Go to deal 261
32 months ago
KAK Blade AR-15 Finish Your 9mm Pistol Kit
Newest newsletter of products we are featuring and are on sale
https://www.getdrip.com/broadcasts/787365186/47e1d7925e133bf119f41
Sign Up for our Newsletter for specials up to 80% off and receive a 5% off coupon for your first purchase
https://www.getdrip.com/forms/948535191/submissions/new
If you like what you see, please don't hesitate to hit that "thumbs up" on the post
Thanks!
- Delta Team Tactical
- UPC:
- MPN:
35 months ago
KAK Blade AR-15 Finish Your 9mm Pistol Kit
KAK Industry Complete Mil-Spec Lower Parts Kit (LPK)
A basic AR-15 lower parts kit. It includes all the small parts needed to complete your lower. You will just need a stock/brace kit and an upper. This kit includes a standard right hand safety selector.
All Fire Control Parts are MPI Tested and Rockwell Tested
Made in the USA
By a major government contractor
Omega Manufacturing AR-15 Lower Parts Kit
The Lower Parts Kit includes:
Black A2 Pistol Grip
Pistol Grip Screw
Pistol Grip Lock Washer
Trigger Guard
Trigger Guard Roll Pin
- UPC:
- MPN:
35 months ago
Davidson Defense “Ross”
AR-15 Pistol Upper Receiver
4” KAK Industries 9MM QPQ Nitride 1-10T Barrel
Slim 4” M-Lok Handguard
(Assembled or Unassembled)
If You Don't Have An AR-15 Pistol Yet, Now Is The Perfect Time To Build One. At This Price There's No Reason Not To Add One To Your Arsenal. This Pistol Upper Kit Once Assembled With Your Favorite Lower And Brace, Will Easily Fit Into Any Collection & Take Up Minimal Space.
- UPC:
- MPN:
36 months ago
https://www.deltateamtactical.com/product.asp?itemid=11111
Buffer Tube Kit for $17.99 Only Available Through The Link Above
KAK Blade AR-15 5.56/.223/300 BLK Finish Your Pistol Kit
KAK Shockwave Blade Pistol Stabilizer - Black
- UPC:
- MPN:
36 months ago
https://mailchi.mp/3897730b8b02/special-summer-savings
Sign up for Exclusive Email Deals and for our Daily Newsletter
Delta Deals AR-15 KAK "Lite" LPK (Minus Fire Control Group)
+ Davidson Defense Trigger
KAK AR-15 "Lite" Lower Parts Kit
KAK AR-15 "Lite" Lower Parts Kit, Features KAK produced parts throughout, No fire control group. KAK billet Trigger guard included. Standard A2 Handle, KAK Stainless steel springs.
Use this Lower Parts Kit when using your aftermarket trigger
-Same as KAK's Standard LPK, but missing the following items-
Hammer
Hammer Spring
Trigger
- UPC:
- MPN:
37 months ago
Sign Up For Exclusive Text Deals
https://touchpointspro.com/form-submit/?r=ZWR6N0g0eGpKV2hqZXduKzdJSUd2Zz09
Don't Forget To Give Us A "Thumbs Up" On This Post
KAK Industry 9X39mm 8.5" SS Barrel 1-7T
KAK Industry announced the roll out of their new 9x39mm series of barrels for the AR15 platform. This caliber is designed primarily for suppressed rifles. This is a typically a subsonic round. This is not a blow-back caliber and is different from the 9mm NATO standard round.
- UPC:
- MPN:
37 months ago
Moving Sale! Huge Savings on BCG's and more
Sign up for Newsletter and give us a "Thumbs Up" on Gun.Deals
https://mailchi.mp/b1f7b04f4e84/moving-sale
Delta Deals AR-15 Pistol Buffer Tube
+ Ambi End Plate + KAK 3oz Buffer
Omega Mfg. Heavy Duty Pistol Buffer Tube W/ Foam Cover
The kit includes:
1 pistol length tube, diameter 1.26"
1 foam cover for comfort while shooting (cover is not USA-made)
Omega Mfg. AR-15/M16 Ambidextrous
Sling Adapter Loop End Plate
AR-15 / M4 Receiver End Plate for adjustable stocks with Ambidextrous Sling Loops
- UPC:
- MPN:
37 months ago
Sign up for Delta Team Tactical Newsletter:
https://mailchi.mp/deltateamtactical/email-list-sign-up
KAK Shockwave 2.0-M AR-15
Finish Your Pistol Kit .223/5.56/.300 BLKOUT
KAK Industry Complete Mil-Spec Lower Parts Kit (LPK)
A basic AR-15 lower parts kit. It includes all the small parts needed to complete your lower. You will just need a stock kit and an upper. This kit includes a standard right hand safety selector.
All Fire Control Parts are MPI Tested and Rockwell Tested
Made in the USA
The Lower Parts Kit includes:
Black A2 Pistol Grip
Pistol Grip Screw
- UPC:
- MPN:
39 months ago
KAK 12.5 INCH CARBINE 350 LEGEND BARREL STAINLESS STEEL
NOTE - 556 MAGAZINES WILL NOT WORK WITH THIS BARREL AND CARTRIDGE, MAGS MUST BE CUSTOM OR MODIFIED TO FEED PROPERLY
KAK 12.5 INCH CARBINE 350 LEGEND
STAINLESS STEEL
CARBINE GAS
MODIFIED EXTENSION
5/8-24 MUZZLE THREADS
.750 GAS BLOCK
1:16 TWIST
DESIGNED FOR FACTORY WINCHESTER AMMUNITION
- UPC:
- MPN:
KAK Industry LLC 3086
39 months ago
Delta Deals KAK 2.0-M Shockwave Adjustable
Blade and Buffer Kit (Choose Your Buffer)
KAK Shockwave 2.0-M Adjustable
Pistol Stabilizer Fits Mil-spec Buffer Tube
- UPC:
- MPN:
Delta Team Tactical 1207
40 months ago
Pick Your KAK Industries Buffer And Blade + Kak LPK + Mil-Spec Pistol Buffer Kit
A basic AR-15 KAK Industries lower parts kit. It includes all the small parts needed to complete your lower. You will just need a stock kit and an upper. This kit includes a standard right hand safety selector.
This combo also includes a mil-spec buffer system minus the buffer. Choose which buffer you would like from our 5.56 NATO and 9MM options. Both buffers are from KAK Industries, however the buffer system itself is from Davidson Defense.
- UPC:
- MPN:
43 months ago
Production over run for a contract
while supplies last
KAK INDUSTRY AR15 FLUTED PISTOL BUFFER TUBE. THIS TUBE IS PERFECT FOR LOW BUDGET PISTOL BUILDS. MILITARY HARD ANODIZED BLACK FINISH. USES STANDARD CARBINE BUFFER AND SPRING (NOT INCLUDED). LISTING IS FOR THE TUBE ONLY, NO END PLATE, BUFFER, SPRING, RECEIVER INCLUDED..
- UPC:
- MPN:
KAK Industry LLC 619
45 months ago
Kit Contains:
1X 9MM EXTENDED STEEL BUFFER BODY
4X ALUMINUM WEIGHTS
4X STEEL WEIGHTS BLACK OXIDE COATED
4X TUNGSTEN WEIGHTS
4X RUBBER SPACER DISKS (1 SPARE)
2X BUFFER BUMPERS (1 SPARE)
2X ROLL PINS (1 SPARE)
GREAT FOR 9MM FINICKY BUILDS, FULL AUTO, SPECIAL SUBSONIC WORK ETC
Included Spare Parts
-RUBBER SPACER DISK
-DIFFERENT COLORED BUMPER (TO NOTATE CONFIGURATION)
-ROLL PIN
SKU#: 2659
- UPC:
- MPN: 2659
46 months ago , by Dealer
KAK INDUSTRIES SHOCKWAVE BLADE PISTOL STABILIZER - BLACK
Features:
– Fits all pistols equipped with a standard AR-15 pistol buffer tube (up to 1.25″ in diameter)—AR pattern, Glock, CZ Scorpion Evo 3, HK9X pattern, etc.
– Available in black and flat dark earth (this listing is for black)
– Quick and easy to install
– Provides additional support during firing
– Weighs a scant 5.0 ounces
– ATF approved for pistol use
– Veteran designed, engineered, marketed, and sold
– Made in U.S.A.
- UPC:
- MPN: KAK-SHKWV-BLK
46 months ago
Fits all pistol equipped with a standard AR-15 pistol buff tube (up to 1.25" in diameter) AR Pattern, Glock, CZ Scorpion Evo 3, HK9X pattern, etc. Quick and easy to install Provides additional support during firing Weighs around 5 ounces ATF approved for pistol use
SKU#: 1019047287
- UPC:
- MPN:
Midway USA 419
47 months ago
SHOCKWAVE BLADE PISTOL STABILIZER
Shockwave is proud to introduce the patent-pending Blade pistol stabilizer. Made from high-strength glass-reinforced polymer, the Blade is manufactured to exacting tolerances and fits all pistols equipped with a standard AR-15 pistol buffer tube (up to 1.25″ in diameter). No special receiver extension needed. No half-hour installation process. Just slip it on and tighten the large set screw for a rock-solid installation.
- UPC:
- MPN: KAK-SHKWV-FDE
48 months ago , by Dealer
4 DAYS ONLY!! 7/9/18 - 7/12/18
FREE KAK INDUSTRIES SHOCKWAVE BLADE PISTOL STABILIZER - BLACK
w/ ORDERS OVER $500
________________________________________________________________________
Features:
– Fits all pistols equipped with a standard AR-15 pistol buffer tube (up to 1.25″ in diameter)—
AR pattern, Glock, CZ Scorpion Evo 3, HK9X pattern, etc.
– Available in black and flat dark earth (this listing is for black)
– Quick and easy to install
– Provides additional support during firing
– Weighs a scant 5.0 ounces
– ATF approved for pistol use
- UPC:
- MPN:
52 months ago
Black KAK Shockwave Blade Pistol Stabilizer (Blemished) $31.95 plus $4.25 shipping.
- UPC:
- MPN:
62 months ago
AR15 Pistol Stabilizing Brace.
$33.99 + $6 flat rate shipping
- UPC:
- MPN:
S&P Outfitters 2210
64 months ago , by Dealer
THIS IS A SOLID 6061 ALUMINUM DEVICE THAT IS DESIGNED TO DIRECT MUZZLE GASES AND THE MUZZLE FLASH FORWARD
5/8-24
THE BORE WILL ALLOW A 9MM TO PASS THROUGH
BLACK MILITARY TYPE HARD ANODIZING
THIS DEVICE IS NOT DESIGNED TO REDUCE RECOIL, MUZZLE RISE, OR FLASH SIGNATURE. THIS DEVICE IS DESIGNED TO DIRECT GASSES AND NOISE FORWARD AWAY FROM THE SHOOTER AND ENHANCE THE WEAPONS APPEARANCE.
THIS MUZZLE DEVICE DOES NOT USE A CRUSH WASHER AND SHOULD BE TORQUED DIRECTLY AGAINST THE BARREL SHOULDER.
1.200 DIAMETER, 1.75 LONG
6061 ALUMINUM BLACK HARD ANODIZED FINISH
4.2 OZ. 3/4 WRENCH FLATS
- UPC:
- MPN:
S & P Outfitters 1797