Wheeler Accessory Deals
(27 deals total)

  • Wheeler

Filter Wheeler Accessory Deals

1 week ago
Complete kit provides everything necessary to mount a scope the correct way, including an instructional DVD. Proper scope installation is critical to the accuracy of your firearm. Get the most accuracy possible out of your gun by ensuring proper scope installation. The Wheeler Alignment Bars, Lapping Bars and Lapping Compound allow you to achieve the perfect fit between scope and rings. Securing Fasteners properly is critical to accuracy as well. Precisely controlled torque along with thread locking compound will keep your scope held securely in place. Professional grade bits and the F.A.T.
6
1 week ago
The Trigger Pull Scale accurately measures trigger pull weight from 8 ounces to 8 pounds. It features an ergonomically shaped handle for consistent direction of pull. Highly visible increment markings and an easy-to-read sliding indicator that stays on the maximum weight registered, make it easy to use. It measures in 2 oz. increments and is accurate to +/- 2 oz. The Trigger Pull Scale is an excellent tool for use when adjusting triggers to ensure accuracy and maintain safe performance. Product Features: Accurately measures trigger pull Easy-to-read sliding indicator
1
2 weeks ago
The Wheeler Delta Series AR-15 Complete Brush Set is specifically designed for cleaning your AR-15. The brushes are made of a high quality stiff Nylon, spun around steel cores for added stability. The brushes feature an 8 x 32 thread that fit on the included cleaning handle or any 8 x 32 cleaning rod. The brush set has everything you need to clean your rifle, plus everything you need to keep your magazines clean and running reliably. The Brush Set Includes: Magazine/Upper Receiver Brush with Magazine Take down Tool Bolt Carrier Brush, Chamber Brush, .22 Cal Bore Brush, and Handle.
0
2 weeks ago
Professional Kit includes: AR-15 Armorer’s Vise AR-15 Combo Tool, Torque Wrench Upper Vise Block Clamp with Gas Tube Alignment Tool Maintenance Mat with Exploded AR-15 Diagram Pivot Pin & Roll Pin Installation Tool AR Front Sight Tool Delta Ring Tool Strap Wrench AR-15 Bore Guide AR-15 Adjustable Receiver Link .22 Cal Bore Brush Bolt Carrier Brush Chamber Brush Magazine/Upper Receiver Brush Nylon Brush Handle Double-ended General Cleaning Brush Cleaning Pick Set Custom Fitted Carrying Case
0
2 weeks ago
Hold the power to clean your rifle in the palm of your hand with the Wheeler Delta Series Compact Rifle Cleaning Kit. This kit comes in a semi-rigid, zippered carry case and can be used on .22 and .30 caliber rifles. Whether you travel a lot, clean at the range, or like to be organized at home, this kit is the perfect size for storing in small spaces, including a magazine pouch, and durable enough to take anywhere. FOR USE ON .22 OR .30 CALIBER RIFLES SEMI-RIGID CARRY CASE FITS INTO AN AR MAGAZINE POUCH COLLAPSIBLE CLEANING ROD WITH ROTATING T-HANDLE STAINLESS STEEL CLEANING ROD
0
3 weeks ago
100-024-279WB Armorers Handgun Sight Tool Description Specs Easily Adjust, Install Or Remove Dovetail Sights The Wheeler Engineering Armorer’s Handgun Sight Tool is a precision machined Handgun Sight Tool. It is designed to install un-install or adjust front and rear dovetail sights. The Wheeler Handgun Sight tool fully captures and supports slides so it won’t deform them. The Sight Tool works on all semi-automatic pistols. It features a large 4 post drive knob to easily push the sight and has reference marks for precise adjustments.
3
1 month ago
Wheeler Tools CYBER WEEK Deals Get 20% off with code "BENCH20"
0
  • UPC:
  • MPN:
1 month ago
The Wheeler 72 Piece screwdriver set features 54 hollow-ground flat bits, 4 phillips, 3 torx, and 8 specialty bits all made from durable S2 tool steel with a 56-58 Rockwell "C" hardness rating. The precision-engineered bits have a concave shape that allows for insertion all the way into the screw slot of rmaximum contact to prevent burred, buggered, busted up screw slots. The kit also includes 2 non-slip, overmolded plastic handles that come in a convenient hinged storage case whcih includes a bit location guide.
0
1 month ago
The AR-15 platform has become the mainstay of today’s Modern Sporting Rifle market. The popularity and modularity of this platform has created the need for specific tools that allow users to build, maintain and reconfigure AR’s. The Delta Series Armorer’s Vise provides users an ideal foundation for all AR tasks. The integrated mag well insert securely engages the lower receiver and adjusts in angle to accommodate any task. The innovative front support is angle adjustable, allowing the barrel portion of the upper or a forend portion to be secured in its tapered profile.
0
1 month ago
Wheeler’s F.A.T. Wrench® (Firearm Accurizing Torque) brings perfect consistency to every screw on your rifle! This amazing handheld torque wrench lets you apply repeatable, accurate torque settings to scope rings, guard screws, and other screws, which aids in accuracy and decreases the opportunity for problems in the field. The FAT Wrench is a perfect compliment to the Deluxe Gunsmithing Screwdriver Sets. Together, they can ensure accurate tightening of most every screw on any gun in your collection. BITS ARE MADE FROM S2 TOOL STEEL AND HARDENED TO 56-56 ROCKWELL "C"
1
1 month ago
Wheeler's Gunsmithing 89 piece Screwdriver Set is the kit that belongs on every gunsmithing bench. The well thought-out bit selection will put an end to burred, buggered and busted up screw slots on any gun that comes your way. The bits make up the heart of any screwdriver set and Wheeler's are the finest available. They're made from S2 tool steel and hardened to 56-58 Rockwell "C." Unlike other screwdriver suppliers, Wheeler's engineers measured the screws on over one hundred modern and antique firearms to make sure that we offered bits for every situation.
3
1 month ago
ACCURACY: Features reference marks for making precise adjustments EASE OF USE: Precision machined with a large 4-post drive knob to easily push the sight and can be used to install, uninstall or adjust front and rear dovetail sights VERSATILITY: Works on all semi-auto pistols and the sight prong is reversible to accommodate Glock slides RELIABLE: Fully captures and supports slide so it will not break or deform DURABLE: Constructed of an aluminum frame with steel components.DURABLE: Constructed of an aluminum frame with steel components ASIN#: B01B3NU0U2 Model number#: 710905
0
1 month ago
EASE OF USE: This Wheeler trigger scale features a digital screen for clear results CONVENIENT: With an audible indicator tone, you’ll know when the Wheeler Digital Trigger Gauge is done RELIABLE: Accurate measurements with 1 oz increments VERSATILE: Measures from 0-12 lbs SPECS: The Wheeler digital gauge directly contacts the trigger for enhanced accuracy ASIN#: B01B7OYTNQ Model number#: 710904
0
4 months ago
The Wheeler Engineering Armorer’s Handgun Sight Tool is a precision machined Handgun Sight Tool. It is designed to install un-install or adjust front and rear dovetail sights. The Wheeler Handgun Sight tool fully captures and supports slides so it won’t deform them. The Sight Tool works on all semi-automatic pistols. It features a large 4 post drive knob to easily push the sight and has reference marks for precise adjustments. Is Discontinued By Manufacturer : No Product Dimensions : 9 x 6 x 5 inches; 4.3 Pounds Item model number : 710905 Department : Unisex-adult
0
5 months ago
The Wheeler Engineering FAT Wrench is a hand driven, click/clutch style torque wrench that is very useful for applying the necessary torque to most firearm and firearm accessory fasteners. The FAT Wrench features a thick ergonomic handle, a standard 1/4" drive tip, and can be used to apply torque from 10 to 65 in-lbs at 5 in-lb increments. Common uses include, but are not limited to: installation of scope ring and base screws, action screws and trigger guard screws. With proper care and use, the FAT Wrench will provide a lifetime of reliable service.
1
11 months ago
Wheeler Engineering Anti-Cant Indicator, 1" Crafted from machined aluminum with an anodized finish Indicates precise, repeatable level gun position Increases accuracy by insuring proper gun alignment, which is critical for turret adjustment and hold over for bullet drop compensation Easy-to-view from shooting position Attaches to scope, folds in when not in use Precision machined aluminum with anodized finish Easy installation
1
13 months ago
The Wheeler Hammer and Punch Set includes a polymer/brass combination hammer, eight precision brass punches, four steel punches, and two plastic punches. It comes in a handy molded case. It makes a great tool for driving pins, drifting sights, at the shooting range or on your gunsmithing bench. ASIN#: B004SY07HU Model number#: 951900
4
14 months ago
Class IIIR with power output less than 5mW Can be used with any caliber rifle or handgun Runs on a single Lithium 123A battery (included) High power daylight visible green laser Uses magnetic connection to mount on muzzle of gun
0
20 months ago
DIMENSIONS: 1 1/4" H x 4" Diameter EASE OF USE: Two-sided tool features all channels and holes needed to add or remove parts from most handguns VERSATILITY: Works perfectly for assembling and disassembling 1911s as well as 10/22s NON-DESTRUCTIVE: Constructed of non-marring urethane INCLUDES: Features a main spring removal recess, barrel link removal V channel, rear sight drift channel, front sight stalking channel, hammer and sear pin removal holes, ejector port dressing channel and a rail dressing round bottom channel ASIN#: B0047WKF84 MPN#: 672215 UPC#: 661120188278
0
24 months ago
The Wheeler Delta Series AR Armorer's Essentials Kit contains all of the essential tools a gunsmith or armorer needs to complete a full rifle build, make repairs or perform normal maintenance on AR-15/M16 platform rifles. Each of these Delta Series tools is designed with application specific features to perform specific functions with precision and ease. Each tool is constructed of the highest quality materials to deliver the best performance at a great value. All of the tools fit inside the durable carry case for convenient storage and transport.
0
27 months ago
Wheeler 156224 Delta Series Armorer's Vice Steel .223 Remington Platform Rifles
0
33 months ago
This 43-Pc. WheelerTM Professional Gunsmith Set includes all the most common Bits for gun cleaning, made by one of the most trusted names in the industry. Each is gently curved at the tip instead of being straight, to protect the fit and finish of the screw.
2
43 months ago
Wheeler AR Bolt Catch Install Punch Kit Features: - Start bolt catch roll pin easily with starter punch - Finish installation flush with the finishing punch - Flat on one side for proper alignment
0
44 months ago
Digitally set and apply the exact amount of torque you need to install delicate base screws, scope rings, windage screws and more with Wheeler's Digital Fat Wrench. This next-generation tool boasts a large LCD digital display for ease of use and this exacting feature translates into more consistent performance in the field. Adjustable torque offers a 15 inch-lbs. to 100 inch-lbs. range with a +/- 2% accuracy. Audible and visual indicators occur when you've reached optimal pressure. Ergonomic, overmolded design and soft touch buttons are comfortable to use.
2
53 months ago
Machined from hardened steel, the punches in the Wheeler Roll-Pin Starter Punch Set resist bending or breaking when driving any size roll pin. A beveled tip ensures proper alignment of the roll pin. The nine-piece set includes: 1/16", 5/64", 3/32", 1/8", 5/32", 3/16", 7/32", 1/4", 5/16" and a fitted nylon pouch. Item number#: IK-232960 SKU#: 710910 ($24.99) UPC#: 661120109105 ($24.99)
0
54 months ago
Help keep your firearm from damage as you install an AR roll pin with the Wheeler® Engineering AR-15 Roll Pin Install Tool Kit. This kit comes with a bolt catch install tool kit, an AR trigger guard install tool, 3 steel starter punches, 3 steel driver punches and a 2-sided hammer. Features and Benefits - Helps install an AR roll pin without damaging or marring your firearm - Includes a bolt catch install tool kit, an AR trigger guard install kit, 3 steel starter punches (sizes 1/16, 5/16 and 3/32), 3 steel driver punches (sizes 1/16, 5/16 and 3/32) and a 2-sided hammer
2
54 months ago
Bring new life to old guns with the spray-on Wheeler Engineering Cerama-Coat. It contains a ceramic mix that delivers superior durability and wear resistance as well as protection against rust, solvents and weather. Simply degrease the item, spray the parts with three light coats of finish and bake the parts in an oven at 350˚ for an hour to cure the finish. Not for use on wood, plastic or scopes. Each 4-oz. can contains enough finish to refinish two long guns. Made in USA. Available: Foliage Green Offers superior durability and wear resistance
0